[ 0.376277] efifb: scrolling: redraw
[ 0.376278] efifb: Truecolor: size=8:8:8:8,
shift=24:16:8:0
[ 0.378586] Console: switching to colour frame
buffer device 200x56
[ 0.380693] fb0: EFI VGA frame buffer device
[ 0.380697] intel_idle: MWAIT substates: 0x42120
[ 0.380698] intel_idle: v0.4 model 0x3C
[ 0.380698] intel_idle:
lapic_timer_reliable_states 0xffffffff
[ 0.380758] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.380761] ACPI: Power Button [PWRB]
[ 0.380778] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.380779] ACPI: Power Button [PWRF]
[ 0.380813] ACPI: Fan [FAN0] (off)
[ 0.380827] ACPI: Fan [FAN1] (off)
[ 0.380840] ACPI: Fan [FAN2] (off)
[ 0.380852] ACPI: Fan [FAN3] (off)
[ 0.380863] ACPI: Fan [FAN4] (off)
[ 0.380896] ACPI: Requesting acpi_cpufreq
[ 0.381261] thermal LNXTHERM:00: registered as
thermal_zone0
[ 0.381262] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.381390] thermal LNXTHERM:01: registered as
thermal_zone1
[ 0.381391] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.381409] GHES: HEST is not enabled!
[ 0.381449] Serial: 8250/16550 driver, 4 ports,
IRQ sharing enabled
[ 0.401972] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is
a 16550A
[ 0.402257] Non-volatile memory driver v1.3
[ 0.402259] Linux agpgart interface v0.103
[ 0.402302] crash memory driver: version 1.1
[ 0.402315] rdac: device handler registered
[ 0.402338] hp_sw: device handler registered
[ 0.402339] emc: device handler registered
[ 0.402340] alua: device handler registered
[ 0.402355] libphy: Fixed MDIO Bus: probed
[ 0.402380] ehci_hcd: USB 2.0 'Enhanced' Host
Controller (EHCI) Driver
[ 0.402382] ehci-pci: EHCI PCI platform driver
[ 0.402440] ehci-pci 0000:00:1a.0: EHCI Host
Controller
[ 0.402465] ehci-pci 0000:00:1a.0: new USB bus
registered, assigned bus number 1
[ 0.402474] ehci-pci 0000:00:1a.0: debug port 2
[ 0.406366] ehci-pci 0000:00:1a.0: cache line size
of 64 is not supported
[ 0.406379] ehci-pci 0000:00:1a.0: irq 16, io mem
0xf7e1c000
[ 0.412032] ehci-pci 0000:00:1a.0: USB 2.0
started, EHCI 1.00
[ 0.412054] usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
[ 0.412056] usb usb1: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
[ 0.412057] usb usb1: Product: EHCI Host
Controller
[ 0.412058] usb usb1: Manufacturer: Linux
3.10.0-123.el7.x86_64 ehci_hcd
[ 0.412058] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.412117] hub 1-0:1.0: USB hub found
[ 0.412120] hub 1-0:1.0: 2 ports detected
[ 0.412226] ehci-pci 0000:00:1d.0: EHCI Host
Controller
[ 0.412250] ehci-pci 0000:00:1d.0: new USB bus
registered, assigned bus number 2
[ 0.412260] ehci-pci 0000:00:1d.0: debug port 2
[ 0.416160] ehci-pci 0000:00:1d.0: cache line size
of 64 is not supported
[ 0.416171] ehci-pci 0000:00:1d.0: irq 23, io mem
0xf7e1b000
[ 0.422032] ehci-pci 0000:00:1d.0: USB 2.0
started, EHCI 1.00
[ 0.422049] usb usb2: New USB device found,
idVendor=1d6b, idProduct=0002
[ 0.422050] usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
[ 0.422051] usb usb2: Product: EHCI Host
Controller
[ 0.422052] usb usb2: Manufacturer: Linux
3.10.0-123.el7.x86_64 ehci_hcd
[ 0.422053] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.422111] hub 2-0:1.0: USB hub found
[ 0.422115] hub 2-0:1.0: 2 ports detected
[ 0.422183] ohci_hcd: USB 1.1 'Open' Host
Controller (OHCI) Driver
[ 0.422184] ohci-pci: OHCI PCI platform driver
[ 0.422189] uhci_hcd: USB Universal Host
Controller Interface driver
[ 0.422258] xhci_hcd 0000:00:14.0: xHCI Host
Controller
[ 0.422284] xhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 3
[ 0.422354] xhci_hcd 0000:00:14.0: cache line size
of 64 is not supported
[ 0.422368] xhci_hcd 0000:00:14.0: irq 45 for
MSI/MSI-X
[ 0.422405] usb usb3: New USB device found,
idVendor=1d6b, idProduct=0002
[ 0.422406] usb usb3: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
[ 0.422407] usb usb3: Product: xHCI Host
Controller
[ 0.422408] usb usb3: Manufacturer: Linux
3.10.0-123.el7.x86_64 xhci_hcd
[ 0.422409] usb usb3: SerialNumber: 0000:00:14.0
[ 0.422458] hub 3-0:1.0: USB hub found
[ 0.422467] hub 3-0:1.0: 10 ports detected
[ 0.424009] xhci_hcd 0000:00:14.0: xHCI Host
Controller
[ 0.424031] xhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 4
[ 0.424050] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0003
[ 0.424051] usb usb4: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
[ 0.424052] usb usb4: Product: xHCI Host
Controller
[ 0.424053] usb usb4: Manufacturer: Linux
3.10.0-123.el7.x86_64 xhci_hcd
[ 0.424054] usb usb4: SerialNumber: 0000:00:14.0
[ 0.424105] hub 4-0:1.0: USB hub found
[ 0.424109] hub 4-0:1.0: 2 ports detected
[ 0.428057] usbcore: registered new interface
driver usbserial
[ 0.428061] usbcore: registered new interface
driver usbserial_generic
[ 0.428065] usbserial: USB Serial support
registered for generic
[ 0.428084] i8042: PNP: PS/2 Controller
[PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.428425] serio: i8042 KBD port at 0x60,0x64 irq
1
[ 0.428428] serio: i8042 AUX port at 0x60,0x64 irq
12
[ 0.428470] mousedev: PS/2 mouse device common for
all mice
[ 0.428557] rtc_cmos 00:06: RTC can wake from S4
[ 0.428650] rtc_cmos 00:06: rtc core: registered
rtc_cmos as rtc0
[ 0.428673] rtc_cmos 00:06: alarms up to one
month, y3k, 242 bytes nvram, hpet irqs
[ 0.428679] Intel P-state driver initializing.
[ 0.428686] Intel pstate controlling: cpu 0
[ 0.428696] Intel pstate controlling: cpu 1
[ 0.428702] Intel pstate controlling: cpu 2
[ 0.428710] Intel pstate controlling: cpu 3
[ 0.428772] cpuidle: using governor menu
[ 0.429060] EFI Variables Facility v0.08
2004-May-17
[ 0.432153] hidraw: raw HID events driver (C) Jiri
Kosina
[ 0.432198] usbcore: registered new interface
driver usbhid
[ 0.432199] usbhid: USB HID core driver
[ 0.432217] drop_monitor: Initializing network
drop monitor service
[ 0.432264] TCP: cubic registered
[ 0.432265] Initializing XFRM netlink socket
[ 0.432307] NET: Registered protocol family 10
[ 0.432394] NET: Registered protocol family 17
[ 0.432555] Loading compiled-in X.509 certificates
[ 0.432573] Loaded X.509 cert 'CentOS Linux kpatch
signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
[ 0.432582] Loaded X.509 cert 'CentOS Linux Driver
update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
[ 0.432929] Loaded X.509 cert 'CentOS Linux kernel
signing key: bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4'
[ 0.433053] EFI: Loaded cert 'Microsoft Windows
Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
linked to '.system_keyring'
[ 0.433065] EFI: Loaded cert 'Microsoft
Corporation UEFI CA 2011:
13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to
'.system_keyring'
[ 0.433161] EFI: Loaded cert 'Red Hat Inc.:
1ff96dd8d1b2327228c04b03a772dbb2dbb79b1f' linked to
'.system_keyring'
[ 0.433241] registered taskstats version 1
[ 0.434522] Key type trusted registered
[ 0.435694] Key type encrypted registered
[ 0.437223] IMA: No TPM chip found, activating
TPM-bypass!
[ 0.437711] rtc_cmos 00:06: setting system clock
to 2015-01-21 13:18:01 UTC (1421846281)
[ 0.438214] Freeing unused kernel memory: 1584k
freed
[ 0.445940] systemd[1]: systemd 208 running in
system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT
+LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 0.446072] systemd[1]: Running in initial RAM
disk.
[ 0.446107] systemd[1]: Set hostname to
<lx-cenb.cenb.local>.
[ 0.448642] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 0.461386] systemd[1]: Expecting device
dev-disk-by\x2duuid-6212bbac\x2d61a9\x2d4f9a\x2d97a9\x2d6fa34a7b2606.device...
[ 0.461395] systemd[1]: Starting -.slice.
[ 0.461482] systemd[1]: Created slice -.slice.
[ 0.461505] systemd[1]: Starting System Slice.
[ 0.461544] systemd[1]: Created slice System
Slice.
[ 0.461562] systemd[1]: Starting Slices.
[ 0.461567] systemd[1]: Reached target Slices.
[ 0.461582] systemd[1]: Starting Timers.
[ 0.461587] systemd[1]: Reached target Timers.
[ 0.461602] systemd[1]: Starting Journal Socket.
[ 0.461631] systemd[1]: Listening on Journal
Socket.
[ 0.461715] systemd[1]: Starting dracut cmdline
hook...
[ 0.461940] systemd[1]: Started Load Kernel
Modules.
[ 0.461950] systemd[1]: Starting Setup Virtual
Console...
[ 0.462151] systemd[1]: Starting Journal
Service...
[ 0.462351] systemd[1]: Started Journal Service.
[ 0.464889] systemd-journald[105]: Vacuuming done,
freed 0 bytes
[ 0.535418] device-mapper: uevent: version 1.0.3
[ 0.552678] systemd-udevd[255]: starting version
208
[ 0.571038] sky2: driver version 1.30
[ 0.571055] sky2 0000:02:00.0: enabling device
(0000 -> 0003)
[ 0.571127] sky2 0000:02:00.0: Yukon-2 EC chip
revision 2
[ 0.571173] sky2 0000:02:00.0: irq 46 for
MSI/MSI-X
[ 0.571458] sky2 0000:02:00.0 eth0: addr
00:50:43:00:45:3e
[ 0.572014] r8169 Gigabit Ethernet driver
2.3LK-NAPI loaded
[ 0.573556] ACPI: bus type ATA registered
[ 0.573891] libata version 3.00 loaded.
[ 0.574366] r8169 0000:03:00.0: irq 47 for
MSI/MSI-X
[ 0.574439] [drm] Initialized drm 1.1.0 20060810
[ 0.574492] r8169 0000:03:00.0 eth1:
RTL8168g/8111g at 0xffffc90000048000, 74:27:ea:7e:9a:3e, XID
0c000800 IRQ 47
[ 0.574494] r8169 0000:03:00.0 eth1: jumbo
features [frames: 9200 bytes, tx checksumming: ko]
[ 0.575532] ahci 0000:00:1f.2: version 3.0
[ 0.575626] ahci 0000:00:1f.2: irq 48 for
MSI/MSI-X
[ 0.575667] ahci 0000:00:1f.2: AHCI 0001.0300 32
slots 4 ports 6 Gbps 0x33 impl SATA mode
[ 0.575669] ahci 0000:00:1f.2: flags: 64bit ncq pm
led clo pio slum part ems
[ 0.582134] scsi0 : ahci
[ 0.582216] scsi1 : ahci
[ 0.582260] scsi2 : ahci
[ 0.582302] scsi3 : ahci
[ 0.582436] scsi4 : ahci
[ 0.582555] scsi5 : ahci
[ 0.582624] ata1: SATA max UDMA/133 abar
m2048@0xf7e1a000 port 0xf7e1a100 irq 48
[ 0.582626] ata2: SATA max UDMA/133 abar
m2048@0xf7e1a000 port 0xf7e1a180 irq 48
[ 0.582627] ata3: DUMMY
[ 0.582628] ata4: DUMMY
[ 0.582629] ata5: SATA max UDMA/133 abar
m2048@0xf7e1a000 port 0xf7e1a300 irq 48
[ 0.582631] ata6: SATA max UDMA/133 abar
m2048@0xf7e1a000 port 0xf7e1a380 irq 48
[ 0.586809] [drm] Memory usable by graphics device
= 2048M
[ 0.586812] checking generic (e0000000 57f000) vs
hw (e0000000 10000000)
[ 0.586813] fb: conflicting fb hw usage inteldrmfb
vs EFI VGA - removing generic driver
[ 0.586832] Console: switching to colour dummy
device 80x25
[ 0.608828] i915 0000:00:02.0: irq 49 for
MSI/MSI-X
[ 0.608834] [drm] Supports vblank timestamp
caching Rev 1 (10.10.2010).
[ 0.608835] [drm] Driver supports precise vblank
timestamp query.
[ 0.608876] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.616159] systemd-udevd[263]: renamed network
interface eth0 to enp2s0
[ 0.625136] systemd-udevd[258]: renamed network
interface eth1 to enp3s0
[ 0.645342] fbcon: inteldrmfb (fb0) is primary
device
[ 0.714011] usb 1-1: new high-speed USB device
number 2 using ehci-pci
[ 0.810014] Console: switching to colour frame
buffer device 200x56
[ 0.812417] i915 0000:00:02.0: fb0: inteldrmfb
frame buffer device
[ 0.812418] i915 0000:00:02.0: registered panic
notifier
[ 0.818293] acpi device:58: registered as
cooling_device9
[ 0.818317] ACPI: Video Device [GFX0] (multi-head:
yes rom: no post: no)
[ 0.818341] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.818413] [drm] Initialized i915 1.6.0 20080730
for 0000:00:02.0 on minor 0
[ 0.828317] usb 1-1: New USB device found,
idVendor=8087, idProduct=8008
[ 0.828319] usb 1-1: New USB device strings:
Mfr=0, Product=0, SerialNumber=0
[ 0.828453] hub 1-1:1.0: USB hub found
[ 0.828562] hub 1-1:1.0: 4 ports detected
[ 0.851536] psmouse serio1: alps: Unknown ALPS
touchpad: E7=10 00 64, EC=10 00 64
[ 0.886980] ata6: SATA link down (SStatus 0
SControl 300)
[ 0.886996] ata2: SATA link down (SStatus 0
SControl 300)
[ 0.887953] ata1: SATA link up 6.0 Gbps (SStatus
133 SControl 300)
[ 0.887969] ata5: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
[ 0.889289] ata1.00: ATA-8: ST31000524AS, JC4B,
max UDMA/133
[ 0.889292] ata1.00: 1953525168 sectors, multi 16:
LBA48 NCQ (depth 31/32)
[ 0.890833] ata1.00: configured for UDMA/133
[ 0.890949] scsi 0:0:0:0: Direct-Access ATA
ST31000524AS JC4B PQ: 0 ANSI: 5
[ 0.895913] ata5.00: ACPI cmd ef/10:06:00:00:00:00
(SET FEATURES) succeeded
[ 0.895916] ata5.00: ACPI cmd f5/00:00:00:00:00:00
(SECURITY FREEZE LOCK) filtered out
[ 0.895918] ata5.00: ACPI cmd b1/c1:00:00:00:00:00
(DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.896989] ata5.00: ATAPI: HL-DT-ST DVDRAM
GH24NSB0, LN01, max UDMA/133
[ 0.901740] ata5.00: ACPI cmd ef/10:06:00:00:00:00
(SET FEATURES) succeeded
[ 0.901744] ata5.00: ACPI cmd f5/00:00:00:00:00:00
(SECURITY FREEZE LOCK) filtered out
[ 0.901746] ata5.00: ACPI cmd b1/c1:00:00:00:00:00
(DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.902846] ata5.00: configured for UDMA/133
[ 0.908633] scsi 4:0:0:0: CD-ROM
HL-DT-ST DVDRAM GH24NSB0 LN01 PQ: 0 ANSI: 5
[ 0.913461] sd 0:0:0:0: [sda] 1953525168 512-byte
logical blocks: (1.00 TB/931 GiB)
[ 0.913563] sd 0:0:0:0: [sda] Write Protect is off
[ 0.913566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
[ 0.913590] sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.927218] sr0: scsi3-mmc drive: 48x/12x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 0.927221] cdrom: Uniform CD-ROM driver Revision:
3.20
[ 0.927326] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 0.930944] usb 2-1: new high-speed USB device
number 2 using ehci-pci
[ 0.957906] sda: sda1 sda2 sda3
[ 0.958501] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.045263] usb 2-1: New USB device found,
idVendor=8087, idProduct=8000
[ 1.045265] usb 2-1: New USB device strings:
Mfr=0, Product=0, SerialNumber=0
[ 1.045526] hub 2-1:1.0: USB hub found
[ 1.045622] hub 2-1:1.0: 6 ports detected
[ 1.298299] bio: create slab <bio-1> at 1
[ 1.358816] tsc: Refined TSC clocksource
calibration: 3092.838 MHz
[ 1.358820] Switching to clocksource tsc
[ 1.427899] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[ 1.638118] SGI XFS with ACLs, security
attributes, large block/inode numbers, no debug enabled
[ 1.655065] XFS (dm-1): Mounting Filesystem
[ 1.710838] [drm] Enabling RC6 states: RC6 on,
RC6p off, RC6pp off
[ 1.730961] XFS (dm-1): Starting recovery (logdev:
internal)
[ 1.800475] XFS (dm-1): Ending recovery (logdev:
internal)
[ 2.043386] systemd-journald[105]: Received
SIGTERM
[ 2.433172] SELinux: Disabled at runtime.
[ 2.433188] SELinux: Unregistering netfilter
hooks
[ 2.453626] type=1404 audit(1421846283.515:2):
selinux=0 auid=4294967295 ses=4294967295
[ 2.533548] systemd[1]: RTC configured in
localtime, applying delta of -120 minutes to system time.
[ 4.910823] systemd-journald[502]: Vacuuming done,
freed 0 bytes
[ 5.418360] RPC: Registered named UNIX socket
transport module.
[ 5.418362] RPC: Registered udp transport module.
[ 5.418363] RPC: Registered tcp transport module.
[ 5.418364] RPC: Registered tcp NFSv4.1
backchannel transport module.
[ 5.825641] systemd-udevd[543]: starting version
208
[ 5.948570] wmi: Mapper loaded
[ 6.091263] shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
[ 6.091759] ACPI Warning: SystemIO range
0x0000000000001828-0x000000000000182f conflicts with OpRegion
0x0000000000001800-0x000000000000187f (\PMIO)
(20130517/utaddress-254)
[ 6.091764] ACPI: If an ACPI driver is available
for this device, you should use it instead of the native
driver
[ 6.091766] ACPI Warning: SystemIO range
0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion
0x0000000000001c00-0x0000000000001c3f (\GPRL)
(20130517/utaddress-254)
[ 6.091768] ACPI Warning: SystemIO range
0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion
0x0000000000001c00-0x0000000000001fff (\GPR_)
(20130517/utaddress-254)
[ 6.091770] ACPI: If an ACPI driver is available
for this device, you should use it instead of the native
driver
[ 6.091771] ACPI Warning: SystemIO range
0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion
0x0000000000001c00-0x0000000000001c3f (\GPRL)
(20130517/utaddress-254)
[ 6.091773] ACPI Warning: SystemIO range
0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion
0x0000000000001c00-0x0000000000001fff (\GPR_)
(20130517/utaddress-254)
[ 6.091774] ACPI: If an ACPI driver is available
for this device, you should use it instead of the native
driver
[ 6.091775] lpc_ich: Resource conflict(s) found
affecting gpio_ich
[ 6.190543] input: PC Speaker as
/devices/platform/pcspkr/input/input5
[ 6.281317] ACPI Warning: SystemIO range
0x000000000000f040-0x000000000000f05f conflicts with OpRegion
0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI)
(20130517/utaddress-254)
[ 6.281322] ACPI: If an ACPI driver is available
for this device, you should use it instead of the native
driver
[ 6.303804] mei_me 0000:00:16.0: irq 50 for
MSI/MSI-X
[ 6.655460] snd_hda_intel 0000:00:03.0: enabling
device (0000 -> 0002)
[ 6.655572] snd_hda_intel 0000:00:03.0: irq 51 for
MSI/MSI-X
[ 6.655611] snd_hda_intel 0000:00:1b.0: enabling
device (0000 -> 0002)
[ 6.655671] snd_hda_intel 0000:00:1b.0: irq 52 for
MSI/MSI-X
[ 6.665133] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 6.673355] input: HDA Intel PCH Front Headphone
as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 6.673400] input: HDA Intel PCH Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 6.673425] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 6.673458] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 6.673485] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 6.925676] alg: No test for __gcm-aes-aesni
(__driver-gcm-aes-aesni)
[ 6.975776] iTCO_vendor_support: vendor-support=0
[ 6.976377] iTCO_wdt: Intel TCO WatchDog Timer
Driver v1.10
[ 6.976400] iTCO_wdt: Found a Lynx Point TCO
device (Version=2, TCOBASE=0x1860)
[ 6.976486] iTCO_wdt: initialized. heartbeat=30
sec (nowayout=0)
[ 7.155967] alg: No test for crc32 (crc32-pclmul)
[ 8.169504] XFS (sda2): Mounting Filesystem
[ 8.458500] Adding 8142844k swap on
/dev/mapper/centos-swap. Priority:-1 extents:1
across:8142844k FS
[ 8.613450] XFS (sda2): Ending clean mount
[ 8.805978] FAT-fs (sda1): Volume was not properly
unmounted. Some data may be corrupt. Please run fsck.
[ 9.016790] XFS (dm-2): Mounting Filesystem
[ 10.554513] XFS (dm-2): Ending clean mount
[ 10.701631] systemd-journald[502]: Received
request to flush runtime journal from PID 1
[ 10.705642] type=1305 audit(1421853491.770:3):
audit_pid=763 old=0 auid=4294967295 ses=4294967295 res=1
[ 11.221459] sd 0:0:0:0: Attached scsi generic sg0
type 0
[ 11.221482] sr 4:0:0:0: Attached scsi generic sg1
type 5
[ 12.429406] sky2 0000:02:00.0 enp2s0: enabling
interface
[ 12.429475] IPv6: ADDRCONF(NETDEV_UP): enp2s0:
link is not ready
[ 12.551950] r8169 0000:03:00.0 enp3s0: link down
[ 12.551965] r8169 0000:03:00.0 enp3s0: link down
[ 12.551987] IPv6: ADDRCONF(NETDEV_UP): enp3s0:
link is not ready
[ 14.201270] r8169 0000:03:00.0 enp3s0: link up
[ 14.201277] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0:
link becomes ready
[ 14.582011] Ebtables v2.0 registered
[ 14.587104] ip_tables: (C) 2000-2006 Netfilter
Core Team
[ 14.592056] ip6_tables: (C) 2000-2006 Netfilter
Core Team