Discuss November 2005

discuss@lists.centos.org

232 participants
368 discussions

g4l and centos
by Jerry Geis 11 Nov '05

11 Nov '05

On Fri, 2005-11-11 at 10:30 -0500, Jerry Geis wrote: >/ Has anyone used g4l (ghost for linux) with centos 4.2 or 4.X? />/ />/ I just tried it with RAW mode, it made the image on my />/ ftp server, I then tried to restore it, seemed like it went ok, />/ tried to reboot and it starts up looks like it is going to work />/ but then something is not right? I am not even sure how to explain />/ what is not right. />/ />/ can you share your steps. />/ /---- don't know about g4l boot CD 1 of any CentOS 4 disks. Type 'linux rescue' and press enter follow the directions... chroot /mnt/sysimage then make sure things are there... ls -l ls -l /boot etc. then to see if you can fix the boot... grub-install /dev/hda Of course this assumes that your new disk is the primary master and if that is the case, you should be able to boot from it. Craig ----------- Craig, Thanks - actually I had just done that. it does not let me chroot /mnt/sysimage. If did the fdisk -l /dev/hda and my partitions are there. It gets past the grub boot already, it is going into the firstboot screens and I get the "Show details" and service startup screen.... When I let it boot I get failed for all the startup services. It's like it is trying to work but something is not found? Very odd.... So close. Jerry

1 0

g4l and centos
by Jerry Geis 11 Nov '05

11 Nov '05

Has anyone used g4l (ghost for linux) with centos 4.2 or 4.X? I just tried it with RAW mode, it made the image on my ftp server, I then tried to restore it, seemed like it went ok, tried to reboot and it starts up looks like it is going to work but then something is not right? I am not even sure how to explain what is not right. can you share your steps. Thanks, Jerry

2 1

Re: [CentOS] VirtualHost squirrelmail and Apache
by James B. Byrne 11 Nov '05

11 Nov '05

On Thu, 10 Nov 2005 13:18:33 +0100, Jujo <jujo(a)jujo.info> wrote: > On the other hand I have a little problem when logging in > squirrelmail from address http://mail.domain.com and not from > http://www.domain.com/webmail but I will post it from house when > I have all information available. > This is likely to be an Apache rewrite problem and not, as was later suggested, either an php or squirrelmail issue per se. If you want a recipe that works for accessing virtual domains and squirrelmail over https (ssl) then you can see my posts at: http://www.webmasterworld.com/forum92/3543.htm However, if you are as inexperienced with apache as you appear to be with dns then you need to know that working with mod rewrite is not for the faint of heart. You can begin at: http://httpd.apache.org/docs/2.0/misc/rewriteguide.html Further, you need to configure squirrelmail itself to handle virtual servers in addition to whatever you do in apache. This feature is provided as a squirrelmail plugin. See: http://www.squirrelmail.org/plugin_view.php?id=47 I consider your questions as entirely appropriate for the CentOS mailing list. This is after all, a distribution, of which bind, apache, sendmail, cyrus-imapd, dovecot and squirrelmail are all a part, no less important than any other. When one is setting up a new system using unfamiliar software then having ready access to a group of people that have already taken the same general path that you are on is a tremendous asset. They are a great source of ancillary information regarding package inter-relationships and side issues that may not be even considered relevant on application specific forums. Regards, Jim -- *** e-mail is not a secure channel *** mailto:byrnejb.<token>@harte-lyne.ca James B. Byrne Harte & Lyne Limited vox: +1 905 561 1241 9 Brockley Drive fax: +1 905 561 0757 Hamilton, Ontario <token> = hal Canada L8E 3C3

1 0

usb bluetooth devices
by Jerry Geis 11 Nov '05

11 Nov '05

Has anyone played with usb bluetooth devices on centos? I am trying to pair a kensington usb bluetooth device with a motorola bluetooth headset and get it to work with a softphone. I am not finding how to pair the two devices? THanks, Jerry

2 1

[OT] Corporate Firewall
by Andrew Cotter 11 Nov '05

11 Nov '05

To put my two cents in, I have been investigating m0n0wall (http://m0n0.com/) for about six months now. I have it running on my home firewall (pc engines WRAP platform http://pcengines.ch) and have loaded it on a number of old Nokia IP330 boxes for testing. A fork of the project to also look at is pfSense (http://pfsense.com/) which is based on m0n0wall. pfSense is much more flexible in terms of add-on packages, is designed with a failover option, and multi-WAN support to name a few things. Then again how much do you want loaded on a firewall which is a topic for a whole different discussion. There is active development on both projects and both seem very usable. Andrew

1 0

kernel recompile help
by Ryan 11 Nov '05

11 Nov '05

Everytime I try to recompile a kernel, "make modules" always dies with the error: mv: cannot stat `include/asm-i386/asm_offsets.h.tmp': No such file or directory make: *** [include/asm-i386/asm_offsets.h] Error 1 I installed the src RPM and kernel-devel ... any ideas as to what I could be doing wrong? Thanks!!

4 8

php versions
by Mark Quitoriano 11 Nov '05

11 Nov '05

Got a question with centos/rhel php versions. because in centos 3 they're still using 4.3.2 and centos 4 which uses 4.3.9. how about the bugfixes done in 4.4 and 4.4.1? centos/rhel updates regularly like centos 3 which already updated for 6 times but still uses 4.3.2? is that mean we still suffer the bugs of the original 4.3.2? -- Regards, Mark Quitoriano, CCNA http://www.atamanetworks.com Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

3 3

CUPS problem with network printing - SOLVED!!! :)))
by Olaf Greve 11 Nov '05

11 Nov '05

Hi all, Yesterday I reported rather vaguely about the printing issues I was experiencing on our local network after the latest kernel update. Today, I solved it, and I'm relaying this information such that others can potentially benefit from it if they run into a similar problem. :) Firstly, I contacted Xante support and they told me I was the first to ask Linux questions; they didn't know what to do... So much for their tech support, so I then took the bull by the horns myself, and went through a debug process. The printer I need to print to has now been shared through a Mac OS X machine, which has printers shared and these printers (two in total) appear properly in the "browsed queues" in Gnome's printer set-up utility. However, printing a test page (either as ASCII, CUPS, or Postscript) still didn't work. I raised the debug level to the max (i.e. "debug2") in /etc/cups/cupsd.conf and restarted cupsd. Checking the /var/log/cups/error_log shows the following relevant debug trace of a failed "print ASCII test page" command from the printer utility: I [11/Nov/2005:12:58:36 +0100] [Job 5] Connecting to dymo-labelwriter.local on port 631... I [11/Nov/2005:12:58:36 +0100] [Job 5] Unable to connect to dymo-labelwriter.local, queuing on next printer in class... d [11/Nov/2005:12:58:37 +0100] select_timeout: 86400 seconds to browse timeout a printer Soooo, the issue obviously resided in CUPS not being able to connect to port 631 on the MacOSX machine. This is where it got interesting, as I checked the MacOSX machine and that port was open (listing "IPP" as port-listener). Doing a remote port scan by the MacOSX's IP address showed a proper list of open ports, and doing so by the alias dymo-labelwriter.local only resulted in a 'host unknown' error. OMG; how blatantly obvious yet easy to overlook this issue now all of a sudden became! :P Indeed... Adding the dymo-labelwriter.local alias with it's corresponging IP address to the /etc/hosts file did the trick. Now it works fine again! Live and learn....;) 'Ave a good weekend! Olafo

1 0

CentOS-announce Digest, Vol 9, Issue 6
by centos-announce-request＠centos.org 11 Nov '05

11 Nov '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:806-01: Low CentOS 2 i386 cpio security update (John Newbigin) 2. CESA-2005:838-01: Moderate CentOS 2 i386 php security update (John Newbigin) 3. CESA-2005:831 Moderate CentOS 3 i386 php - security update (Lance Davis) 4. CESA-2005:831 Moderate CentOS 4 x86_64 php - security update (Johnny Hughes) 5. CESA-2005:831 Moderate CentOS 4 i386 php - security update (Johnny Hughes) 6. CESA-2005:825 Low CentOS 4 i386 lm_sensors - security update (Johnny Hughes) 7. CESA-2005:825 Low CentOS 4 x86_64 lm_sensors - security update (Johnny Hughes) 8. CESA-2005:1110-001 Moderate CentOS 4 i386 php - security update (CENTOSPLUS only) (Johnny Hughes) 9. CESA-2005:1110-001 Moderate CentOS 4 x86_64 php - security update (CENTOSPLUS only) (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 11 Nov 2005 10:44:34 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005:806-01: Low CentOS 2 i386 cpio security update To: centos-announce(a)centos.org Message-ID: <4373DB62.5030009(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2005:806-01 Low: cpio security update Files available: cpio-2.4.2-25.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Fri, 11 Nov 2005 10:45:48 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005:838-01: Moderate CentOS 2 i386 php security update To: centos-announce(a)centos.org Message-ID: <4373DBAC.7000102(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2005:838-01 Moderate: php security update Files available: php-4.1.2-2.3.i386.rpm php-devel-4.1.2-2.3.i386.rpm php-imap-4.1.2-2.3.i386.rpm php-ldap-4.1.2-2.3.i386.rpm php-manual-4.1.2-2.3.i386.rpm php-mysql-4.1.2-2.3.i386.rpm php-odbc-4.1.2-2.3.i386.rpm php-pgsql-4.1.2-2.3.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 3 Date: Fri, 11 Nov 2005 01:54:54 +0000 From: Lance Davis <lance(a)uklinux.net> Subject: [CentOS-announce] CESA-2005:831 Moderate CentOS 3 i386 php - security update To: centos-announce(a)centos.org Message-ID: <1131674093.4655.47.camel(a)centos3.wellhouse> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2005:831 php security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2005-831.html refers The following updated files have been uploaded and are currently syncing to the mirrors: i386: updates/i386/RPMS/php-4.3.2-26.ent.i386.rpm updates/i386/RPMS/php-devel-4.3.2-26.ent.i386.rpm updates/i386/RPMS/php-imap-4.3.2-26.ent.i386.rpm updates/i386/RPMS/php-ldap-4.3.2-26.ent.i386.rpm updates/i386/RPMS/php-mysql-4.3.2-26.ent.i386.rpm updates/i386/RPMS/php-odbc-4.3.2-26.ent.i386.rpm updates/i386/RPMS/php-pgsql-4.3.2-26.ent.i386.rpm source: updates/SRPMS/php-4.3.2-26.ent.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update php

1 0

tacacs+ RPM.?
by Mark Sargent 11 Nov '05

11 Nov '05

Hi All, is there an RPM for it for CentOS.? I tried "yum install tacacs+" but got nothing. I also checked dags repo and found nothing. Cheers. Mark Sargent.

3 4

← Newer
1
...
21
22
23
24
25
26
27
...
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2005