Discuss June 2005

discuss@lists.centos.org

197 participants
362 discussions

IP Problems - Address won't stick on reboots!
by Scott Heisler 12 Jun '05

12 Jun '05

Centos 4.0 P4 Dual Xeon 2gig Ram One 100mb NIC The problem is that the nic won't hold a fixed IP address. What I mean is that if I refresh it, after booting up by typing "ifdown eth0" and then "ifup eth0" - it then reflects the correct IP address. However, it won't 'have' and IP address upon boot. Also, it seems to hang on the logger service starting up. It sits there attempting to start logger for like 3-4 minutes (timed!). I suspect this problem is most likely related to the IP problem. I've tried moving the network connection to a dedicated HUB and still no luck. What is the correct config file to edit to set the IP address correctly? I tried editing the one in /etc/sysconfig/network-scripts - but that didn't fix my problem. Thanks. Scott

2 1

RE: [CentOS] A questiong about replacing my failing drive
by Bryan J. Smith 11 Jun '05

11 Jun '05

From: Doug Eubanks > My HDA drive is failing (I can hear the occasional click from it > and I am seeing Smart errors, The reason why I never build a system without a 3Ware card today. > A> Make bootable floppy Redundant. > B> Start in single user mode Typically a good idea, but you can do this with the original, and the new hard drive added. > C> Create same partition structure on hew drive Yes, although it doesn't have to be the same. Just mount it all as you want under /newroot of the original. Don't forget to watch out for duplicate filesystem labels, and change your boot/fstab on the new. > D> Move all files from old partitions to new partitions for i in ‘/ /boot/ /other/‘: do cd $i find . -mount | cpio -pmdv /newroot$i done > E> Switch drives > F> Boot off floppy, mount, reinstall grub and boot manager on new drive Or just use the distro's CD and rescue mode. > G> Profit! > Any hangups or snags doing it this way? Only as mentioned above.

1 0

Betr.: [CentOS] IP Problems - Address won't stick on reboots!
by Thom van der Boon 11 Jun '05

11 Jun '05

The file to edit is /etc/sysconfig/network-scripts/ifcfg-eth0 It should look something like this. You should edit it with your settings DEVICE=eth0 BOOTPROTO=static BROADCAST=xxx.xxx.xx.255 HWADDR=xx:xx:xx:xx:xx:xx IPADDR=xxx.xx.xx.xxx NETMASK=255.255.255.0 NETWORK=xxx.xxx.xx.0 ONBOOT=yes TYPE=Ethernet Thom van der Boon E-Mail: Thom.van.der.Boon(a)vdb.nl ===== Thom.H. van der Boon b.v. Havens 563 Jan Evertsenweg 2-4 NL-3115 JA Schiedam Tel.: +31 (0)10 4272727 Fax: +31 (0)10 4736620 E-Mail: info(a)vdb.nl Home Page: http://www.vdb.nl/ >>> scott.heisler(a)huntleighusa.com 10.06.2005 22:52:34 >>> Centos 4.0 P4 Dual Xeon 2gig Ram One 100mb NIC The problem is that the nic won't hold a fixed IP address. What I mean is that if I refresh it, after booting up by typing "ifdown eth0" and then "ifup eth0" - it then reflects the correct IP address. However, it won't 'have' and IP address upon boot. Also, it seems to hang on the logger service starting up. It sits there attempting to start logger for like 3-4 minutes (timed!). I suspect this problem is most likely related to the IP problem. I've tried moving the network connection to a dedicated HUB and still no luck. What is the correct config file to edit to set the IP address correctly? I tried editing the one in /etc/sysconfig/network-scripts - but that didn't fix my problem. Thanks. Scott _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Error when clicking on link>>text error correction
by Dick Roth 11 Jun '05

11 Jun '05

I meant to say that I left my home directory intact so I would _not_ have to re-option, etc... Good Morning-- Since installing CentOS4 the other day, I've had trouble with Thunderbird 1.02 when attempting to click on a link within an email. Rather than opening a tab in Firefox 1.0.4, I get an error message: "Error showing url: There was an error launching the default action command associated with this location." When I installed CentOS, I left my home directory intact so I would have to re-option apps I had already been using. Has anyone else had this problem...and found a cure? I did check the archives, but didn't stumble upon anything useful. Thank, Dick -- Pithy saying goes here: (future). _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Error when clicking on link
by Dick Roth 11 Jun '05

11 Jun '05

Good Morning-- Since installing CentOS4 the other day, I've had trouble with Thunderbird 1.02 when attempting to click on a link within an email. Rather than opening a tab in Firefox 1.0.4, I get an error message: "Error showing url: There was an error launching the default action command associated with this location." When I installed CentOS, I left my home directory intact so I would have to re-option apps I had already been using. Has anyone else had this problem...and found a cure? I did check the archives, but didn't stumble upon anything useful. Thank, Dick -- Pithy saying goes here: (future).

1 0

Re: [CentOS] WEP and CentOS 4
by Bryan J. Smith <b.j.smith＠ieee.org> 11 Jun '05

11 Jun '05

From: Maciej ?enczykowski <maze(a)cela.pl> > Hey, > Don't bother with it, WEP can be broken (cracked) in 5 minutes > (with easily available and freely downloadable soft) and in my > experience all WEP really achieves is slows down the link (my > 2xIWE1100 bridge runs at 550kB/s without WEP and 100kB/s with WEP). The idea, as always, is to make yourself a smaller target than the next guy. As always, standard: - No SSID broadcast - No Open System access - MAC filtering - WEP - Always VPN Use WPA/802.1x if you've got it. -- Bryan J. Smith mailto:b.j.smith@ieee.org

5 5

upgrade from fedora to centos?
by Ian mu 11 Jun '05

11 Jun '05

Hiya, just wondering how easy this would be, I'm guessing through yum, but is there a preferable process from updating from fed core 3 to centos ideally keeping settings as is? (desktop rather than server, just want to migrate to centos, nothing too essential apart from raw data). Ian

4 4

memory leaking?? kernel problem?
by israel.garcia＠cimex.com.cu 11 Jun '05

11 Jun '05

List, I have the two servers CentOS 4.0 (running postfix, mailscanner) on this hardware: HP netserver 2000, PIII - 1GHz, 512 ram, two Hdd SCSI - 36 GB (RAID 1), I have monitored this server for a couple of months and I've seen that the memory used is increasing every week until it reaches all available memory and the server crashes.... at this point mailscanner crashes or sometimes the server gets freezed....my question is? Is this a memory leak? I 've always used this combination (mailscanner, postfix on Whitebox) and never got a problem, but when I upgrade my system to CentOS (kernel 2.6) this problem began.. can you help me? regards Israel

4 3

Easiest way how to receive FAXes from an external modem?
by Petr Klíma 11 Jun '05

11 Jun '05

Hello Is in CentOS 4 an easy way how to receive FAXes from an external modem (COM2)? I need not send ... Sorry for souch stupid question, but I am rookie in linux/faxing and Google shows tons of options... I would like use na way which is clearest for CentOS 4 ... Petr Klíma

5 4

[Fwd: Red Hat Enterprise Linux 4 Update 1 Availability Announcement]
by William Warren 11 Jun '05

11 Jun '05

It's official -------- Original Message -------- Subject: Red Hat Enterprise Linux 4 Update 1 Availability Announcement Red Hat is pleased to announce the availability of Update 1 for the Red Hat Enterprise Linux 4 family of products, including: - Red Hat Enterprise Linux AS (v. 4) for x86, AMD64/EM64T, Itanium, POWER, S/390 and zSeries - Red Hat Enterprise Linux ES (v. 4) for x86, AMD64/EM64T, Itanium - Red Hat Enterprise Linux WS (v. 4) for x86, AMD64/EM64T, Itanium - Red Hat Desktop (v. 4) for x86 and AMD64/EM64T This update includes the following enhancements: - Availability of a full set of updated installable CD ISO images via Red Hat Network, with OS package updates and install-time support for new hardware. - Availability of updated Extras ISO images via Red Hat Network, with third party package updates. - Dual core support for AMD64 Opteron and Intel EM64T ICH7 systems. - Support for ICH7, including Glenwood and Lakeport chipsets. - Improved disk dump capability (including SATA and megaraid support). - Updated Intel IA32 Execution Layer for the Itanium2 architecture. - Updated Intel Centrino ipw2100/ipw2200 wireless drivers and firmware. - Driver updates including ata_piix, bonding, e1000, e100, ibmveth, libata, lpfc, megaraid_mbox, megaraid_mm, sata_nv, sata_promise, sata_sil, sata_sis, sata_svw, sata_via, sata_vsc, and tg3 - Many platform hardware support updates and bug fixes. - Security updates, bug fixes, and feature enhancements to numerous system packages. Errata Advisories describing specific changes in Update 1 are available online at: https://rhn.redhat.com/errata/rhel4as-errata.html (AS) https://rhn.redhat.com/errata/rhel4es-errata.html (ES) https://rhn.redhat.com/errata/rhel4ws-errata.html (WS) https://rhn.redhat.com/errata/rh-desktop-4-errata.html (Desktop) Release notes for this update will be available on the Red Hat documentation site at: http://www.redhat.com/docs/manuals/enterprise/ This update is available immediately to all current Red Hat Enterprise Linux subscribers via Red Hat Network. Simply run 'up2date' to retrieve the latest packages, or visit the following URL to download ISO images for new installations: https://rhn.redhat.com/network/software/download_isos.pxt Regards, The Red Hat Enterprise Linux Team -- nahant-list mailing list nahant-list(a)redhat.com http://www.redhat.com/mailman/listinfo/nahant-list -- Computer House Calls, Networks, Security, Web Design: http://www.emmanuelcomputerconsulting.com What businesses are in Brunswick, Maryland? Check Brunswick First! http://www.checkbrunswickfirst.com My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

3 2

← Newer
1
...
20
21
22
23
24
25
26
...
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2005