Discuss September 2005

discuss@lists.centos.org

243 participants
335 discussions

SATA RAID Block
by Ed Morrison 30 Sep '05

30 Sep '05

I'm looking to add a sata raid controller to my server, give it a terabyte of HDs and make a myth backend. I'm having trouble determining if this raid block is compatible with linux. Does anyone have any experience with this item? http://www.plinkusa.net/webBP-SATA3141B.htm

1 0

ntpd broadcastclient
by Fong Vang 29 Sep '05

29 Sep '05

This ntp.conf file works fine with RedHat Enterprise 3.0 and below. However, it doesn't work with CentOS 4.1. #authenticate no #enable auth driftfile /etc/ntp/drift keys /etc/ntp/ntp.keys server 127.127.1.0 <http://127.127.1.0> fudge 127.127.1.0 <http://127.127.1.0> stratum 10 trustedkey 1 enable bclient broadcastclient This is the error reported in /var/log/messages: Sep 29 20:24:36 wsp-mich-74-1 ntpdate[9758]: step time server 10.0.107.1<http://10.0.107.1>offset 0.033880 sec Sep 29 20:24:36 wsp-mich-74-1 ntpd: succeeded Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: ntpd 4.2.0a(a)1.1190-r Mon Feb 21 17:54:52 GMT 2005 (1) Sep 29 20:24:36 wsp-mich-74-1 ntpd: ntpd startup succeeded Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: precision = 1.000 usec Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: Listening on interface wildcard, 0.0.0.0#123 Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: Listening on interface lo, 127.0.0.1#123 Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: Listening on interface eth0, 10.0.74.1#123 Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: Listening on interface eth1, 10.0.42.1#123 Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: kernel time sync status 0040 Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: Unable to listen for broadcasts, no broadcast interfaces available Sep 29 20:24:36 wsp-mich-74-1 ntpd[9766]: Unable to listen for broadcasts, no broadcast interfaces available Sep 29 20:27:50 wsp-mich-74-1 ntpd[9766]: synchronized to LOCAL(0), stratum 10 Sep 29 20:34:04 wsp-mich-74-1 -- MARK -- Has anyone gotten broadcastclient to work?

1 0

Please recommend a DVD writer for CentOS 4.1
by Morten 29 Sep '05

29 Sep '05

Hi. I need to install DVD writers in a CentOS box as part of a backup setup. I want as little fuss as possible both with HW recognition and functionality. Can any of you recommend a vendor/product ? Performance of the drive is not an issue. I get confused looking at all the "+/-RW +R double layer yada yada" when skimming the hardware lists.. Any help is much appreciated. Thanks Morten

6 6

A little iptables help
by James Pifer 29 Sep '05

29 Sep '05

Wondering if anyone is willing to give me a little assistance with some firewall rules. I think what I'm looking for is fairly simple, and I've been trying to use webmin's firewall module without success. I have a web server that I'd like to open up port 80 and forward a specific port for a select number of allowed ips. That's it. Everything else is dropped. allow: port 80 allow: forward port 8000 for x.x.x.x to y.y.y.y Anyone willing to assist with the rules? And lastly, how would I apply it in a way that it will always be in affect? If the machine reboots for example. Any help is appreciated. James

11 37

virtual interfaces
by Ryan 29 Sep '05

29 Sep '05

I have CentOS 4 running on an old (early model) p3 with 64 MB RAM. It is acting as a router and firewall for my LAN. CentOS is doing a really good job with Shorewall + DHCPd - on a 10 Mbps cable modem, I see ~ 9.7 Mbps of throughput even when numerous tcp streams to different LAN hosts are running. I would like to add a virtual interface to one of my LAN interfaces. My LAN interface (/etc/sysconfig/network-scripts/ifcfg-eth2) looks like: DEVICE=eth2 BOOTPROTO=static BROADCAST=192.168.10.255 HWADDR=00:60:08:C3:F9:71 IPADDR=192.168.10.1 NETMASK=255.255.255.0 NETWORK=192.168.10.0 ONBOOT=yes TYPE=Ethernet would adding the below: /etc/sysconfig/network-scripts/ifcfg-eth2:0 DEVICE=eth2:0 BOOTPROTO=static BROADCAST=192.168.20.255 HWADDR=00:60:08:C3:F9:71 IPADDR=192.168.20.1 NETMASK=255.255.255.0 NETWORK=192.168.20.0 ONBOOT=yes TYPE=Ethernet Would this create a virtual interface eth0:0 with the IP address 192.168.20.1? Thanks in advance.

5 4

OpenOffice MIME types not working on Centos 4
by Hugo Perez Casanova 29 Sep '05

29 Sep '05

Hi. I have a problem with OpenOffice MIME types on Centos 4 when using KDE, it seems that konqueror does not recognize the file extensions. Gnome works fine. Any ideas?

2 2

NFS Mount - RH7.3 Server - CentOS 4.1 Client
by Tom Brown 29 Sep '05

29 Sep '05

Hi Just upgrading one of my dev servers - I'm replacing a current box that runs 7.3 to one that runs CentOS 4.1 Currently the 7.3 dev box talks to a fileserver also running 7.3 over NFS and that works fine. I'm now trying to get the CentOS 4.1 box to talk NFS to the 7.3 server. When i try and mount the NFS share on the CentOS box i get the following error # mount /mnt/cvs mount to NFS server 'Server Name' failed: server is down. Now i know the server is not down as the 7.3 client is connected fine. Anyone seen this before or know a work around? Nothing in any logs from client or server to give me any hints? thanks

4 8

centos 4 installed on P4 won't boot on P3
by Tom 29 Sep '05

29 Sep '05

Hi, I installed centos 4 on a P4, configured it (and it booted fine here) then sent it to the DC to be put in a P3 but it won't boot, displays GRUB and halts. The DC guys tried grub-install in rescue mode but still the same. Any clues? Is there some difference between P3 and P4? thanks tom

4 10

CentOS-announce Digest, Vol 7, Issue 16
by centos-announce-request＠centos.org 29 Sep '05

29 Sep '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:659 Low CentOS 3 ia64 binutils - security update (Pasi Pirhonen) 2. CESA-2005:081 Low CentOS 3 ia64 ghostscript - security update (Pasi Pirhonen) 3. CESA-2005:663 CentOS 3 ia64 Updated kernel packages available (Pasi Pirhonen) 4. CESA-2005:373 Low CentOS 3 ia64 net-snmp - security update (Pasi Pirhonen) 5. CESA-2005:550 Low CentOS 3 ia64 openssh - security update (Pasi Pirhonen) 6. CESA-2005:345 Low CentOS 3 ia64 slocate - security update (Pasi Pirhonen) 7. CESA-2005:659 Low CentOS 3 s390(x) binutils - security update (Pasi Pirhonen) 8. CESA-2005:081 Low CentOS 3 s390(x) ghostscript - security update (Pasi Pirhonen) 9. CESA-2005:373 Low CentOS 3 s390(x) net-snmp - security update (Pasi Pirhonen) 10. CESA-2005:550 Low CentOS 3 s390(x) openssh - security update (Pasi Pirhonen) 11. CESA-2005:345 Low CentOS 3 s390(x) slocate - security update (Pasi Pirhonen) 12. CESA-2005:081 Low CentOS 3 i386 ghostscript - security update (Tru Huynh) 13. CESA-2005:081 Low CentOS 3 x86_64 ghostscript - security update (Tru Huynh) 14. CESA-2005:345 Low CentOS 3 i386 slocate - security update (Tru Huynh) 15. CESA-2005:345 Low CentOS 3 x86_64 slocate - security update (Tru Huynh) 16. CESA-2005:373 Low CentOS 3 i386 net-snmp - security update (Tru Huynh) 17. CESA-2005:373 Low CentOS 3 x86_64 net-snmp - security update (Tru Huynh) 18. CESA-2005:550 Low CentOS 3 i386 openssh - security update (Tru Huynh) 19. CESA-2005:550 Low CentOS 3 x86_64 openssh - security update (Tru Huynh) 20. CESA-2005:659 Low CentOS 3 i386 binutils - security update (Tru Huynh) 21. CESA-2005:659 Low CentOS 3 x86_64 binutils - security update (Tru Huynh) 22. CESA-2005:663 Important CentOS 3 i386 kernel - security update (Tru Huynh) 23. CESA-2005:663 Important CentOS 3 x86_64 kernel - security update (Tru Huynh) 24. CESA-2005:663 CentOS 3 s390(x) Updated kernel packages available (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Sep 2005 18:41:33 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:659 Low CentOS 3 ia64 binutils - security update To: centos-announce(a)centos.org Message-ID: <20050928154133.GQ15823(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:659 https://rhn.redhat.com/errata/RHSA-2005-659.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/binutils-2.14.90.0.4-39.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

RE: [CentOS] centos 4 installed on P4 won't boot on P3
by ABOKHALAF, Nassri Abdellatif 29 Sep '05

29 Sep '05

> Hi, > > I installed centos 4 on a P4, configured it (and it booted > fine here) then sent it to the DC to be put in a P3 but it > won't boot, displays GRUB and halts. > > The DC guys tried grub-install in rescue mode but still the same. > > Any clues? Is there some difference between P3 and P4? Happends when the MotherBoard chipset differs to much (usually ide controllers) We had similar problems with P4 with via & intel chipset. You may nedd to do a new install on that p3. Nassri > > thanks > tom > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss September 2005