Discuss January 2006

discuss@lists.centos.org

240 participants
336 discussions

playing mp3's
by Damien Hull 17 Jan '06

17 Jan '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 My main system is Fedora. To get mp3's working I added freshrpms to my yum.conf file. This allowed me to install xmms-mp3. Should I add freshrpms to CentOS? I searched google and didn't find much on this topic. If there is another way to get mp3's and other multimedia working I would like to know. - -- You can get my public PGP key at https://keyserver.pgp.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.7 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFDzBYa+rNhalK/8UURAltNAJ96/Dg8ARDZXi/eRjJP8YbcnjqHHQCdGHsb H8ynjIpcDj6MZ0zj+pfe3Ro= =9PPo -----END PGP SIGNATURE-----

2 1

vpn tools
by Andrew Rice 16 Jan '06

16 Jan '06

Does anyone know if I can use traceroute on a vpn connection to see if everything on my end is working ok? I ran ipsec eroute and it shows the tunnel is up and passing traffic to it but just curious what all tests that I can run on them. -- Andrew Rice Jr Systems Analyst Carrier Management Systems, Inc. 500 Chestnut Street, Suite 500 Abilene, TX 79602 USA support: (325) 672-0975 office: (325) 677-5900 fax: (325) 676-0529 http://www.nams.net NAMS III, NAMS 2000 Centralized, NAMS BMX

3 5

No Mic(Headphones are fine)
by Mark Sargent 16 Jan '06

16 Jan '06

Hi All, I went and bought a new headset, as I thought the old one,(almost 5yrs old), was no good. But, when trying to skype, I still can't be heard. I know the sound card worked before, although, it has been some time, since I mic'd anything. Anyone got any ideas, other than a possible dud sound card(socket)? Cheers. Mark Sargent.

4 5

Red Hat Directory Server
by israel.garcia＠cimex.com.cu 16 Jan '06

16 Jan '06

Hi, Is there any Red Hat Directory Server RPM for Centos? Or similar? Regards; Israel

4 3

4.2 Kernel panic on rmmod ip_gre...
by Maciej Żenczykowski 16 Jan '06

16 Jan '06

$ uname -a Linux xxx 2.6.9-22.0.1.ELsmp #1 SMP Thu Oct 27 13:14:25 CDT 2005 i686 i686 i386 GNU/Linux $ lsmod | grep "[^0-9]0" | grepbyhand ip_gre 16865 0 3c59x 41213 0 tg3 85061 0 It is very likely an error that these have usage counts of 0. (the interfaces are very much up, and a GRE tunnel is configured) Seeing as the same thing happens with bcm5700 modules from HP it's likely this is not actually a module problem but a more basic networking logic fault. I can't test whether removing tg3/3c59x will result in a panic, but removing the ip_gre module broke the system (praise ilo...) - Not posting a trace since it's obvious why it broke... Comments? Cheers, MaZe

1 0

CentOS-announce Digest, Vol 11, Issue 5
by centos-announce-request＠centos.org 16 Jan '06

16 Jan '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0179-01: Critical CentOS 2 i386 auth_ldap security update (John Newbigin) 2. CESA-2006:0156-01: Low CentOS 2 i386 Moderate: ethereal security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 16 Jan 2006 11:08:53 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2006:0179-01: Critical CentOS 2 i386 auth_ldap security update To: centos-announce(a)centos.org Message-ID: <43CAE415.1020201(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2006:0179-01 Critical: auth_ldap security update Files available: auth_ldap-1.4.8-3.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Mon, 16 Jan 2006 11:10:30 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2006:0156-01: Low CentOS 2 i386 Moderate: ethereal security update To: centos-announce(a)centos.org Message-ID: <43CAE476.3040602(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2006:0156-01 Moderate: ethereal security update Files available: ethereal-0.10.14-1.AS21.1.i386.rpm ethereal-gnome-0.10.14-1.AS21.1.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 11, Issue 5 **********************************************

1 0

bugzilla rpm?
by Matt Lawrence 16 Jan '06

16 Jan '06

Does anyone know where to find a RPM of bugzilla for CentOS4 (or RHEL4)? I'm still very new at building RPMs, so I would strongly prefer to get one already built (and by someone who is better at it than I am). -- Matt

2 1

USB Problem
by Paul R. Ganci 16 Jan '06

16 Jan '06

I am having this problem where out of the blue my mouse and UPS will stop functiong. Once this even occurs I will find multiple messages like: Jan 15 10:40:32 nureyev kernel: drivers/usb/input/hid-core.c: control queue full Jan 15 10:40:42 nureyev kernel: drivers/usb/input/hid-core.c: control queue full iin /var/log/messages. The only way I can get the mouse and UPS back is to ssh into the affected machine and do: rmmod ohci_hcd modprobe ohci_hcd Then the system will be good from anywhere to a few hours to a week when this occurs again. I am running an up to date Centos 4.2 albeit with the 2.6.9-27 SMP kernel. Here are the devices on the USB: # cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 27/900 us ( 3%), #Int= 2, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-27.ELsmp ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:02:00.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c002 Rev= 1.10 S: Manufacturer=Logitech S: Product=USB-PS/2 Mouse M-BA47 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=051d ProdID=0002 Rev= 1.06 S: Manufacturer=American Power Conversion S: Product=Back-UPS RS 1000 FW:7.g4 .D USB FW:g4 S: SerialNumber=JB0317027749 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 24mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms Does anyone have any ideas on what I might do to fix this problem. Thanks. -- Paul (ganci(a)nurdog.com)

1 0

Ping
by Dan Wright 16 Jan '06

16 Jan '06

Ping

2 1

Linksys WPC11 v2.5 + CentOS 4
by Barry Brimer 16 Jan '06

16 Jan '06

Does anyone have a Linksys WPC11 v2.5 running under CentOS 4? If so, were there any special tricks that you had to perform? Any information would be most helpful. Thanks, Barry Brimer

2 2

← Newer
1
...
17
18
19
20
21
22
23
...
34
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss January 2006