Discuss December 2006

discuss@lists.centos.org

209 participants
192 discussions

Re: [CentOS] tftp times out
by Jeff Stacey 28 Dec '06

28 Dec '06

I have found for pxe installs that tftp would only work (for me) if the owner:group of the files/directories in question are nobody:nogroup Jeff On Thu, 2006-12-28 at 14:05 -0600, Mark Snyder wrote: > > chrism(a)imntv.com wrote: > > Mark Snyder wrote: > >> > >> tftp keeps timing out when I try to transfer files. I intend to use > >> tftp with G4U to clone a standard workstation. I am testing it between > >> two Dell poweredge servers running CentOS 4.3. "chkconfig --list > >> |grep tftp" shows tftp up and running on both boxes. When connected > >> "tftp>status" shows it is talking to the other box > >> "tptp>trace" shows "sent WRQ <file=slavelit, mode=netascii>" and ends > >> with Transfer timed out. > >> > >> I have tftp is being run under xinetd. > >> > >> I have modified /etc/xinetd.d/tftpd as follows: > >> > >> server_args -p -c -U 002 -u install -s /tster > >> > >> I have setup a user install, set read/write privileges on /tster which > >> is owned by install > >> > >> Not sure what else I need to do to get this working, any suggestions > >> would be appreciated > > > > Have you checked the usual culprits? SELINUX or iptables? Try > > disabling them one at a time and see if the bad behavior disappears. > > > > both are disabled, but it was a good thought. > > > Cheers, > > > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

2 1

Autorespond
by abhishek singh 28 Dec '06

28 Dec '06

Hi all, I am using sendmail as MTA , so i want to use autoresponder facility , i want to autorespond whenever i recived mail for a particular id like sam(a)somedomain.com so by this id sendmail send autorespond mail while i want to save recieved mail into user mail box . or anyone plz tell me the webmail that provides Autoreponding facility . thanks in advance Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php

3 2

creating script for init.d
by Linux Man 28 Dec '06

28 Dec '06

Hello. I'm moving from a very old Fedora Core 1 to CentOS 4.4, what a change!! Three year ago, I wrote some script (network related) and worked very well. Now, I can put into init.d by means of chkconfig and I restarted the system, but always hang when executing my srcipt (in my new centos 4.4). There a manual for making scripts for init.d? there is some new requirement by which it does not work anymore? Thanks a lots!!!!

9 15

USB Mem Stick
by Robert Spangler 28 Dec '06

28 Dec '06

Hi all, Is there any good how-to's for getting a usb memory stick to auto mount when it is connected to the usb port? Or is this to happen automatically? I got a 2G memory stick for Christmas so that I can transfer files from machine to machine (home/work) but it doesn't look like it mounts automatically like the cdrom does. Thnx for your input. -- Regards Robert Smile... it increases your face value!

2 4

CentOS 5
by Mário Gamito 28 Dec '06

28 Dec '06

Hi, Sorry for the lame question, but i've been away from the list for some time and i couldn't find any info about this issue in the web. I have two questions: 1) Is there a CentOS 5 beta for download ? 2) When will CentOS 5 final be ready ? Any help would be appreciated. Warm Regards, Mário Gamito

3 2

Kickstart: Give IP From ks= Cmdline A Myth?
by Karl R. Balsmeier 27 Dec '06

27 Dec '06

Hey, someone just told me yesterday that I can give my machine an initial IP address, gateway, dns server, and netmask via command line like this: linux ks=http://www.mydomain.com/kick.ks ip=192.168.1.5 netmask=255.255.255.0 gateway=192.168.1.1 dns=192.168.1.10 Is this true? Is the syntax wrong or right? If so, and I call my kick.ks file and it has install cdrom it'll pull the files from the CD but won't launch the CD install right? I just want to initiate a kickstart where the systems get their drive partitioning info, IP addressing & hostname attributes, and minimal install packages, from the kickstart file. Is it really true that you can use the above command line to give an address for the machine to use in seeking out a kickstart file on the network? I tried it a few times last night an looked for a very long time for examples of this syntax, and found none. -krb

3 3

Software RAID1 issue
by Gerald Waugh 27 Dec '06

27 Dec '06

When a new system CentOS-4.4 is built the swap partition is always reversed... Note md3 below, the raidtab is OK, I have tried various raid commands to correct. swapoff -a raidstop /dev/md3 mkraid /dev/md3 --really-force swapon -a And then I get a proper ourput for /proc/mdstat, but when I reboot /proc/mdstat again reads as below, with md3 [0] [1] reversed. [root]# cat /proc/mdstat Personalities : [raid1] md3 : active raid1 hda3[0] hdc3[1] 1000320 blocks [2/2] [UU] md1 : active raid1 hdc1[1] hda1[0] 1953408 blocks [2/2] [UU] md2 : active raid1 hdc2[1] hda2[0] 1953408 blocks [2/2] [UU] md5 : active raid1 hdc5[1] hda5[0] 1953408 blocks [2/2] [UU] md6 : active raid1 hdc6[1] hda6[0] 71295232 blocks [2/2] [UU] unused devices: <none>

2 2

Openwebmail problem
by abhishek singh 27 Dec '06

27 Dec '06

hi all I am trying to install openwebmail , i have installed successfully but when i am trying to access it through web-browser then i am getting following error in my webserver error log..... YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET! FIX YOUR KERNEL, OR PUT A C WRAPPER AROUND THIS SCRIPT! Premature end of script headers: openwebmail.pl plz helpme out thanks Abhishek Kr. Singh System Administrator DSC. LTD. Mob.No. +91-9871563248 Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php

2 1

openwebmail autorespond problem
by abhishek singh 27 Dec '06

27 Dec '06

hi all i m trying to setup autoresponder in openwebmail its working fine but i m facing one problem if i am sending mail from my domain to mydomain like from sysadmin(a)example.com to ak(a)example.com so from sk account i m getting autoreply but when someone is sending mail from outside of my domain like yahoo.com so openwebmail is not able to autorespond to outside domains like yahoo.if anyone has suggestion so plz let me know. thanks Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php

1 0

Problem with HTTPS ON CENTOS 4.4
by Indunil Jayasooriya 27 Dec '06

27 Dec '06

Hi all , I set up https on CentOS 4.4. I did the below sets of commands, first removed existing files rm /etc/httpd/conf/ssl.key /server.key rm /etc/httpd/conf/ssl.crt/server.crt Next, I created key. Change to the /usr/share/ssl/certs/ directory and type in the following command: make genkey then issued below command, make testcert finaly /sbin/service httpd restart Then I got the below error? Starting httpd: Apache/2.0.52 mod_ssl/2.0.52 (Pass Phrase Dialog) Some of your private key files are encrypted for security reasons. In order to read them you have to provide the pass phrases. Server worldnet.itabspl.com:443 (RSA) Enter pass phrase:Apache:mod_ssl:Error: Private key not found. **Stopped [FAILED] pls NOTE that I folowed the CENTOS DOC to set up this. URL is given below. http://www.centos.org/docs/4/html/rhel-sag-en-4/s1-secureserver-generatingk… Why is that? How to get it up and running? Pls help me. Thank you Indunil Jayasooriya

3 3

← Newer
1
2
3
4
5
6
7
...
20
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2006