Discuss March 2006

discuss@lists.centos.org

274 participants
422 discussions

tg3 gigabit speed
by Jure Pečar 05 Mar '06

05 Mar '06

Hi all, I have two HP DL145 G1 machines, running centos4 (2.6.9-22.0.2.ELsmp). Nics are recognized as: eth0: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00:1a:19:f1:05 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap [1] eth1: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00:1a:19:f1:04 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap [1] Both machines are wired in the same way: eth0 is connected do 100mbit switch, eth1 to a gigabit switch. But: # mii-tool eth0: negotiated 100baseTx-FD, link ok eth1: negotiated 100baseTx-FD flow-control, link ok If I force eth1 to 1000 with ethtool, I get no link and then it autonegotiates itself back to 100. I can't even get them to talk at gigabit speed if I connect both machines together with crossover cable! Am I doing something wrong or is this a hardware problem? -- Jure Pečar http://jure.pecar.org/

3 4

Color Laser Printer, comments!
by John Pierce 04 Mar '06

04 Mar '06

I am considering purchasing a color laser printer for my network and would appreciate some feedback. I have looked at the following: Konica/Minolta 2430DL HP 2600N Can anyone tell me how well they work and are supported by cups as a network laser printing solution? TIA John -- Registered Linux User 263680, get counted at http://counter.li.org -- Registered Linux User 263680, get counted at http://counter.li.org

7 11

RE: [CentOS] CentOS 4.2: kernel version
by Castello, Jean-pierre (TS/Linux-HPC) 04 Mar '06

04 Mar '06

Thanks. You are right after investigation kernel patch was applied I did not know. Thanks for your prompt reply. Jean-Pierre Castello -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Karanbir Singh Sent: samedi 4 mars 2006 13:39 To: CentOS mailing list Subject: Re: [CentOS] CentOS 4.2: kernel version Castello, Jean-pierre (TS/Linux-HPC) wrote: > Hello > > Installing sw on a CentOS 4.2 (iso version) I notice that the kernel > version is > 2.6.9-22.0.1.Elsmp > in RH4 UP2 the kernel version is 2.6.9-22.Elsmp > > Some sw complain and check the kernel version. > > Why this specific version extension 0.1 ? > Thanks for your help > > Sorry if this question was already asked. > the install kernel on centos-4.2 is 2.6.9-22.EL the 22.0.1.EL and 22.0.2.EL are updated issued since the 4.2 was released - but the installer still uses -22.EL. so i can quite safely assure you that its not a CentOS iso you are using there.... - KB -- Karanbir Singh : http://www.karan.org/ : 2522219@icq _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

How Undo Yum Upgrade
by John Thomas 04 Mar '06

04 Mar '06

I accidentally enabled a repo, so my automatic yum upgrade installed a bunch of stuff and possibly broke yum. Is it possible to reverse this? Follow is the yum log of what got installed. Mar 04 01:34:04 Updated: libselinux.i386 1.23.10-1.99_3.el4.at Mar 04 01:34:04 Updated: popt.i386 1.10.2-15.1_58.el4.at Mar 04 01:34:04 Installed: libbeecrypt6.i386 4.1.2-9.2_11.el4.at Mar 04 01:34:04 Installed: libxml2_2.i386 2.6.22-1_21.el4.at Mar 04 01:34:04 Installed: librpm4.3.i386 4.3.3-8_41.el4.at Mar 04 01:34:04 Updated: neon.i386 0.24.7-5.99_2.el4.at Mar 04 01:34:05 Installed: librpm4.4.i386 4.4.2-15.1_58.el4.at Mar 04 01:34:05 Updated: rpm.i386 4.4.2-15.1_58.el4.at Mar 04 01:34:08 Installed: python24.i386 2.4.1-2_8.el4.at Mar 04 01:34:08 Updated: libxml2.i386 2.6.22-1_21.el4.at Mar 04 01:34:08 Installed: pythonabi.i386 2.3.4-1.el4.at Mar 04 01:34:09 Updated: libxml2-python.i386 2.6.22-1_21.el4.at Mar 04 01:34:09 Updated: rpm-python.i386 4.4.2-15.1_58.el4.at Mar 04 01:34:09 Installed: libxml2-python24.i386 2.6.22-1_22.el4.at Mar 04 01:34:10 Installed: rpm-python24.i386 4.4.2-11_9.el4.at Mar 04 01:34:11 Installed: neon-devel.i386 0.24.7-5.99_2.el4.at Mar 04 01:34:11 Updated: libselinux-devel.i386 1.23.10-1.99_3.el4.at Mar 04 01:34:11 Installed: atrpms.noarch 67-1.at Mar 04 01:34:12 Updated: perl-XML-LibXML.i386 1.58-4.el4.at Mar 04 01:34:12 Installed: sqlite-devel.i386 3.2.2-1 Mar 04 01:34:13 Updated: yum.i386 2.4.2-69.el4.at Mar 04 01:34:13 Updated: rpm-build.i386 4.4.2-15.1_58.el4.at Mar 04 01:34:15 Updated: libxml2-devel.i386 2.6.22-1_21.el4.at Mar 04 01:34:15 Updated: rpm-devel.i386 4.4.2-15.1_58.el4.at Mar 04 01:34:15 Erased: rpm-libs

3 14

CentOS 4.2: kernel version
by Castello, Jean-pierre (TS/Linux-HPC) 04 Mar '06

04 Mar '06

Hello Installing sw on a CentOS 4.2 (iso version) I notice that the kernel version is 2.6.9-22.0.1.Elsmp in RH4 UP2 the kernel version is 2.6.9-22.Elsmp Some sw complain and check the kernel version. Why this specific version extension 0.1 ? Thanks for your help Sorry if this question was already asked. Jean-Pierre Castello

2 1

ntop **ERROR** Queue of address '???' failed, code -1 [addr queue=4096/max=4097]
by J.J.Garcia 04 Mar '06

04 Mar '06

Hi all, Running CentOS 4.2 with the following conditions: [root@gatekeeper bin]# uname -srvmpi Linux 2.6.9-22.0.1.EL #1 Thu Oct 27 12:26:11 CDT 2005 i686 i686 i386 [root@gatekeeper bin]# uptime 07:54:41 up 31 days, 13:45, 6 users, load average: 0.00, 0.02, 0.00 [root@gatekeeper bin]# rpm -q ntop ntop-3.1-1.2.el4.rf [root@gatekeeper bin]# df -h S.ficheros Tamaño Usado Disp Uso% Montado en /dev/mapper/VolGroup00-LogVol00 2,9G 2,4G 425M 85% / /dev/hda1 99M 16M 79M 17% /boot none 157M 0 157M 0% /dev/shm [root@gatekeeper bin]# free total used free shared buffers cached Mem: 321044 312068 8976 0 44984 98648 -/+ buffers/cache: 168436 152608 Swap: 655352 480 654872 [root@gatekeeper bin]# vmstat procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 480 8976 44992 98676 0 0 3 4 8 5 6 2 90 1 I've found the following error in syslog: ============================================================================ Mar 3 21:54:07 gatekeeper ntop[4711]: **ERROR** Queue of address '???' failed, code -1 [addr queue=4096/max=4097] Mar 3 21:54:07 gatekeeper ntop[4711]: ntop processing continues, address will not be resolved ============================================================================ TIA Jose.

1 0

file command returns incorrect MIME type?
by Benjamin Smith 04 Mar '06

04 Mar '06

Here's the problem: [ben@kepler tmp]# file -i presentation.ppt presentation.ppt: application/msword I see lots of references to this problem, (EG: IMP, PHP bug, etc) all of which conclude, in various forms, "the problem is in your /usr/share/magic.mime, go away". But nowhere (that I've been able to find) is there actually a solution - and even the magic.mime file from the latest tar (downloaded from astron.com) didn't fix it, either. The magic file in the apache directory seems to come up with the answer of: no answer. When you access a ppt in apache, it comes back with a generic response rather than "application/powerpoint" Any ideas? -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

2 2

RE: [CentOS] Scalix install on CentOS
by Timothy 04 Mar '06

04 Mar '06

>Sweet. I downloaded the new v10 so I am looking forward to trying it out. I >noticed one of the requirements was sendmail. Does anyone know if postfix is >fine instead of sendmail? I prefer to run postfix rather than sendmail.. Scalix is based on the HP Openmail system. It's pretty much a complete replacement of the MTA. No postfix. I'm installing it for a small business. They use lookout for the client. This thing rocks. Shared calendar, public folders. All this stuff just works. I was able to integrate spamassassin and clamav with it also. The webmail access is really good too. They use tomcat5 for all the web stuff. All the administration is done via the java web interface. There is command line stuff I'm starting to scratch the surface on. I've installed community edition 9.4.2 and 10 on centos4. Good luck. Cheers, Tim

1 0

3ware 9550 series
by David Thompson 04 Mar '06

04 Mar '06

Anyone have any experience with these products yet? We've got one in for eval, but I thought I'd also ask for experiences here... Thanks in advance. Dave Thompson The University of Wisconsin - Madison Computer Sciences Department

7 9

Problem with oracle&httpd...
by siva m 04 Mar '06

04 Mar '06

Hi, I have CentOS 4.2 installed on my PC and I've successfully installed Oracle 10g along with apache web server(httpd) and perl-DBD-Oracle. The problem is trying to connect to oracle to oracle from a CGI script. I defined all of the environment variables(ORACLE_HOME, LD_LIBRARY_PATH, PERL5LIB) in httpd.conf as well as apachectl scripts but I am getting the following error in the logs: ========================================= [Fri Mar 03 00:31:25 2006] [error] [client 192.168.251.6] Can't load '/usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi/auto/DBD/Oracle/Oracle.so' for module DBD::Oracle: libclntsh.so.10.1: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 230. ============================================ Also I disabled SELlinux, defined all of the above mentioned env variables in /etc/profile but now use. One weird thing is that as a standalone perl script I can connect to oracle but not through CGI. Can any one please suggest what's going wrong or what am I missing? thanks in advance, Siv

3 4

← Newer
1
...
35
36
37
38
39
40
41
42
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2006