Discuss July 2006

discuss@lists.centos.org

213 participants
260 discussions

postfix conf for use external smtp
by Guillermo Garron 14 Jul '06

14 Jul '06

Hi all, i wonder how to configure postfix make it use externa smtp server i tried the following relayhost = my.stmp.com smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_auth_enable = yes smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = $smtp_sasl_security_options smtp_use_tls = yes in /etc/postfix/sasl_passwd i have my.smtp.com user:password then i postmap /etc/postfix/sasl_passwd restart the postfix, but now i have this problem. Jul 14 12:06:33 garron postfix/smtp[8510]: ECA31F3009D: to=< ggarron(a)hotmail.com>, relay= my.smtp.com, delay=2, status=deferred (Authentication failed: cannot SASL authenticate to server scz.alketech.com[ 200.87.61.8 3]: no mechanism available) i tried with smtp_sasl_security_options = noanonymous smtp_sasl_security_options = noplaintext, noanonymous smtp_sasl_security_options = but never works, with the second i got the error up. with the other it does not even try to login. i also saw this. when i issue this command as root postmap -q my.stmp.com hash:sasl_passwd i go this error Jul 14 13:12:13 garron postfix/postmap[9123]: fatal: open database sasl_passwd.db: Permission denied i tried even with 777 permissions any clues? regards, Guillermo.

1 0

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

that doesn't work - if I linux dd=nfs:<io>:<path> the installer hangs with 'loading megaraid_sas' and no USB-device is working (so I can't see whether this is the driver included in CentOS or the driver loaded via NFS) when I try with linux expert noprobe dd=nfs:<io>:<path> I must load the network drivers by hand first but then I can not specify to load the driverdisk via NFS _and_ I'm not able to load the driver via USB-floppy/stick and linux dd=/dev/device is not working because NO usb-device is working - no usb stick - no usb floppy - no usb mouse -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 14:57 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation On 7/14/06, Horchler, Joerg <joerg.horchler(a)coremedia.com> wrote: > how can I tell him where to find the drivers? the installer always > tries to use /dev/hda put dd=/path/to/drivers on the end of your entry at the installer prompt. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

RE: [CentOS] how to upgrade clamav?
by Bowie Bailey 14 Jul '06

14 Jul '06

spart cus wrote: > Craig White <craigwhite(a)azapple.com> wrote: > On Thu, 2006-07-13 at 18:29 -0700, spart cus wrote: > > hi guys, > > how can i upgrade my clamav without affecting my mail server. im > > using centos4.2 mailscanner, spamassassin and clamav. i recently > > found some logs when i issued freshclam, saying i have to upgrade > > it. > ---- > did you get it from a configured yum repository? > > yum update > > did you compile from source? you can do it again then. > > > Hi Craig, > > i just did the yum install clamav clamav-devel before and used perl > > -MCPAN to install clamav perl module.what process will i do ? Same thing. Install the new versions: yum update clamav clamav-devel Use perl -MCPAN to install the newest clamav perl module (if needed). Restart the services: service clamd restart service freshclam restart (depending on the names of your init files, of course) There will be a short interruption in clamd availability while it restarts, but it can't be helped. -- Bowie

1 0

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

ok - I will try that -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 14:57 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation On 7/14/06, Horchler, Joerg <joerg.horchler(a)coremedia.com> wrote: > how can I tell him where to find the drivers? the installer always > tries to use /dev/hda put dd=/path/to/drivers on the end of your entry at the installer prompt. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

how can I tell him where to find the drivers? the installer always tries to use /dev/hda -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 14:41 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation On 7/14/06, Horchler, Joerg <joerg.horchler(a)coremedia.com> wrote: > ok - I tried this too. But CentOS tries to find the floppy as /dev/hda > which is not the device for the USB-Floppy. Dell ships one with the > server because no one is integrated. So when I try to include the > driver disk the installer is not able to find it. So put the driver disk on a local network NFS share, webserver or usb memory stick. It doesn't have to be an actual floppy disk (people still use those?). I usually toss all the drivers I'm going to need for an install at work onto a usb memory stick and let the installer pick them up from there. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

AW: [CentOS] Problems with installation
by Horchler, Joerg 14 Jul '06

14 Jul '06

ok - I tried this too. But CentOS tries to find the floppy as /dev/hda which is not the device for the USB-Floppy. Dell ships one with the server because no one is integrated. So when I try to include the driver disk the installer is not able to find it. -----Ursprüngliche Nachricht----- Von: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] Im Auftrag von Jim Perrin Gesendet: Freitag, 14. Juli 2006 13:30 An: CentOS mailing list Betreff: Re: [CentOS] Problems with installation > Does anyone knows how I can solve these problems? Is kudzu not working > correct for the first one? You need driver disks from your vendor to load the megaraid_sas module. You should be able to find them at linux.dell.com. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Emailing from Command Line
by Mark Schoonover 14 Jul '06

14 Jul '06

Thanks for reading, I need certain shell scripts to email me after they are done running. I've installed ssmtp to forward to my internal SMTP server. I have a working ssmtp config on a Gentoo system that works just fine, but on CentOS it's not working. Here's a bounce message: Date: Thu, 13 Jul 2006 13:33:22 -0700 From: Mail Delivery Subsystem <MAILER-DAEMON(a)backups.amgt.com> To: <root(a)backups.amgt.com> Subject: Returned mail: see transcript for details Auto-Submitted: auto-generated (failure) [-- Attachment #1 --] [-- Type: text/plain, Encoding: 7bit, Size: 0.3K --] The original message was received at Thu, 13 Jul 2006 13:33:22 -0700 from backups.amgt.com [127.0.0.1] ----- The following addresses had permanent fatal errors ----- <admins(a)amgt.com> ----- Transcript of session follows ----- 550 5.1.2 <admins(a)amgt.com>... Host unknown (Name server: amgt.com: no data +known) [-- Attachment #2 --] [-- Type: message/delivery-status, Encoding: 7bit, Size: 0.3K --] -N +- 2/3: Mail Delivery Subsys Returned mail: see transcript for de -- (11%) DNS does work, and I have an MX record to my internal SMTP server, even though the ssmtp doesn't use DNS/MX records to forward email. I've also tried turning sendmail on/off as well. Where else should I look?? A typical command I'm using to email from the shell is this: mail -s "Test de Backups" foo(a)bar.com < /dev/null ... Any help, most appreciated! Thanks! Mark Schoonover IS Manager American Geotechnical V: 858-450-4040 - F: 714-685-3909 - C: 858-472-3816

3 3

RE: [CentOS] Simple backup program
by Bowie Bailey 14 Jul '06

14 Jul '06

Les Mikesell wrote: > On Wed, 2006-06-14 at 13:09 -0400, Bowie Bailey wrote: > > > > I am looking for a simple backup program that I can use to > > > > backup a CentOS box to a local tape drive. > > > > http://flexbackup.sf.net > > > > > > I used that for years, but the network grew and needed a "bigger" > > > solution so I switched to backuppc which is working great. > > > > I'm using backuppc. I just need something to dump the backuppc > > machine to tape for an offsite or last-resort backup. The problem > > is that backuppc is currently using 161GB (compressed) and the > > tapes only hold 40GB each, so I need something with some sort of > > intelligent tape-spanning capability. > > You are going to have more trouble than that. Backuppc will have > millions of hardlinks in that 161GB and nearly all file oriented > backup programs will take an impractical amount of time to deal > with them. And restoring will be even worse - basically everything > ends up building a table of inode numbers and scanning it for a match > on every hardlink. True, but this will only be used as a last-case scenario for restores, so in that case I'm willing to wait a bit. > > I haven't seen flexbackup. I'm currently evaluating afbackup. > > You really want a matching external hard drive so you can > dd an image copy to it. There has been quite a bit of discussion > on this topic on the backuppc mail list and I'm not sure anyone > has come up with an ideal solution. Or, you can use the 'archive > host' feature of backuppc to generate tar images of backup runs > optionally compressed and split to fit your media, but these > are copies of individual hosts and you loose the pooling feature. I agree that hard drives are faster, larger, and cheaper than tapes, but I can drop a tape onto a concrete floor and reasonably expect it to work afterwards. A hard drive might still work, but I wouldn't want to bet on it. -- Bowie

3 2

how to upgrade clamav?
by spart cus 14 Jul '06

14 Jul '06

hi guys, how can i upgrade my clamav without affecting my mail server. im using centos4.2 mailscanner, spamassassin and clamav. i recently found some logs when i issued freshclam, saying i have to upgrade it. tnx. --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

2 2

Minimum steps needed to get horde working with a single pop3 server?
by Drew Weaver 14 Jul '06

14 Jul '06

I installed horde/Imp via yum and I am having difficulty getting it to function with my single POP3 server. I defined my external POP3 server in imp/config/servers.php, but every time I type in a POP3 username and password into the login screen it takes me to a blank redirect.php. Anyone have any idea whats going on? Note, all I did to setup apache was change the document root from /var/www/html to /usr/share/horde Thanks, Andrew

2 1

← Newer
1
...
15
16
17
18
19
20
21
...
26
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2006