Discuss September 2006

discuss@lists.centos.org

275 participants
362 discussions

RE: [CentOS] Re: Yum update to 4.4 stamps all over rndc.conf
by Bowie Bailey 12 Sep '06

12 Sep '06

Email Lists wrote: > -> Once the number three, being the third number, be > -> reached, then lobbest thou thy Holy Chicken of Antioch towards thy > foe, > > Ok... after much chasing around the yard and far too much clucking > baaaagokkkkk racket... I have the chicken!!! > > Still alive I might add. :-) > > Now, where in scripture do I find this again? :-) Armaments, chapter two, verses nine through twenty-one. :) Waaaaaaay too much Monty Python... -- Bowie

2 1

RE: [CentOS] 2.6.9-42.ELsmp kernel and 3ware 9550 tools
by Bowie Bailey 12 Sep '06

12 Sep '06

Matt Hyclak wrote: > On Tue, Sep 12, 2006 at 09:41:57AM -0400, Bowie Bailey enlightened us: > > I have the latest kernel with the drivers for my 3ware 9550SX > > built in. Where can I find the tools and monitoring apps for this > > card? Are there rpms hiding somewhere, or do I need to build it > > from source? > > If you want package management, I've attached the spec files I use. > They're nosrc, so you'll have to download the code from 3ware's > website, but at least afterwards they'll be managed by rpm. Thanks for the suggestions, everyone. I found and installed the 3dm2 utility from the CD packaged with the controller. Just a note for anyone else doing this... If you do the install from their menu, the install window will close before you have a chance to read the instructions on finishing the setup. Do the 3dm2 install from the command line to save yourself some confusion. -- Bowie

2 1

Upgrading I2C Modules
by Kirk Bocek 12 Sep '06

12 Sep '06

Does anyone know how to upgrade the I2C modules *without* compiling the current kernel source? I have a system that apparently needs the current set of I2C modules to work with lm_sensors. If I compile the current kernel source, the proper readings show up. However, with the stock 2.6.9-42.0.2 kernel, one sensor chip isn't seen. Trying to compile the I2C source yields a "Use the modules in the 2.6 kernel source" message. I really want to use the stock kernel. Anyone know how to do this? Thanks, Kirk Bocek

1 1

ipw2200 and intel hdaudio not working kernel 2.6.9-42.0.2.EL
by Nicholas Anderson 12 Sep '06

12 Sep '06

Hi All, can anybody tell me what has changed in this new kernel release that is getting most of us stucked ? I have an Intel HDA Audio device and an Intel 2200 wireless in my laptop and both stopped working with this new kernel. Both audio and wireless device seems to be ok but there's no sound from the intel hda and the wireless find AP's but doesn't connect. below is the lspci output of the devices: Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection I'm already using the most recent version of the ipw firmware ... [root@localhost ~]# rpm -q ipw2200-firmware ipw2200-firmware-2.4-2.0.rf any tips ? cheers, Nick -- Nicholas Anderson Administrador de Sistemas Unix LPIC-1 Certified Rede Fiocruz

2 1

2.6.9-42.ELsmp kernel and 3ware 9550 tools
by Bowie Bailey 12 Sep '06

12 Sep '06

I have the latest kernel with the drivers for my 3ware 9550SX built in. Where can I find the tools and monitoring apps for this card? Are there rpms hiding somewhere, or do I need to build it from source? -- Bowie

4 3

Bandwidth Traffic Meter
by Adriano Frare 12 Sep '06

12 Sep '06

Dear Friends, I installed HTB in Server Centos 4.4 and I would like verify if control HTB is it work. Are there software and show bandwidth meter per port ? Text Mode ? Thanks Adriano

7 8

Problem in detecting LAN card and soundcard in compaq presario v2000
by Ajay Tripathi 12 Sep '06

12 Sep '06

Dear All, I have installed the centOS 4.3 in my laptop. OS is not detected the ethernet card as well as sound card. Pls help me for activating the lan card drivers. regards, Ajay -- Technical Officer Skype ID: erajay; National Internet eXchange of India. STPI (Software Technology Park of India), Ganga Shopping Complex,Sector-29, Noida,U.P. INDIA (M) +91-9868477444(D)+91-120-4318082 Tel: +91-120-2450411, Ext. 348 ,Telefax :+91-120-4316795 E-mail: ajay(a)nixi.in ,P-mail:ajay.mast@gmail.com

2 1

mixed repos
by "ΠΑΤΡΙΣ > Τμημα Inte rnet" 12 Sep '06

12 Sep '06

Hello, Does anybody knows a way to keep updated mixed repositories without mixing them ? For Example i have 3 repos in my desktop centos system , Centos repos handled by up2date Dag repo handled by apt and Karan repo handled by yum. I need packages from each repo but i don't want the secondary repos to mess my system so i never update with these repos. is there a way each tool (up2date, yum, apt) to update only the packages that came from that repo and not the whole system ? for example to update dag packages i use apt-get install and the names of dag repos packages in my system but it's kind of complicated to track all these packages one by one. I believe that if this mater resolved and we can have multiple repos and more apps than centos can compete even ubuntu.

2 1

RE: [CentOS] Kernel ELsmp vs EL
by Sebastien Tremblay 12 Sep '06

12 Sep '06

> On 07/09/06, Jim Perrin <jperrin(a)gmail.com> wrote: > > On 9/6/06, Sebastien Tremblay <sebastien.tremblay(a)au.cmpmedica.com> wrote: > > > Hi all, > > > > > > I'm not very used to CentOS and Linux generally speaking, though I > > > read a lot and 'man' quickly became a very good friend of mine, > > > right after Google, so sorry if that's a ridiculous one! (at least > > > it'll give you a good laugh!) > > > > > > I updated the kernel to 2.6.9-42.0.2 recently and that raised a > > > question... Simple... Yet silly...! What exactly is the difference > > > between 2.6.9-42.0.2EL and 2.6.9-42.0.2ELsmp? It seems the default > > > install was the 'smp' kernel, but as I had to change the grub config > > > I stumbled across this one and... started wondering... > > > > SMP is for dual processor (or dual core) systems. The default EL > > kernel is for a single processor system, but is installed as a > > failsafe kernel on smp systems "just in case". > > > > AFAIK running smp kernel on a single core machine with hyper threading switched on is also good idea. > Awesome... Next server has HT.. So I'll give that a try! Cheers for your time! Seb. _____________________________________________________________________ This message and any attachments are confidential and are solely intended for the use of the addressee(s). If you are not the intended recipient please contact the sender by reply email. Please also disregard the contents of this email and delete and destroy any copies immediately. CMPMedica Australia Pty Ltd does not accept liability for the views expressed in this email or for the consequences of any computer viruses that may be transmitted with this email. Also subject to copyright, no part of this message should be reproduced or transmitted without written consent.

6 6

Taring up the OS - how to exclude directories
by Robert Moskowitz 12 Sep '06

12 Sep '06

From the howto: http://www.faqs.org/docs/securing/chap29sec305.html I got some ideas to help me to tar up the OS. I had already been shown how to wrap it into SSH to deposit the tar file on another system, so I tried the following: tar cpvzf - -C / --exclude home --exclude media --exclude mnt --exclude proc --exclude */lost+found | ssh root(a)10.0.0.2 "cat>backup-060907.tgz" But, whereas the howto is talking about --exclude dealing with files, the Centos Man on tar is saying that it applies to files. So what is wrong? I know the SSH stuff is correct as when I put in something like ls I get a file with result of the ls. Also I had done this without the excludes and of course it died slowing when it got to /media/cdrom :(

5 10

← Newer
1
...
19
20
21
22
23
24
25
...
37
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss September 2006