Discuss December 2007

discuss@lists.centos.org

279 participants
374 discussions

System freezes with i8042_panic_blink on suspend
by Olaf Mueller 22 Dec '07

22 Dec '07

Hello, I am using CentOS 4.6 (2.6.9-67.plus.c4) on a toshiba tecra 8000 notebook. If closing the panel, "Panel Power On/Off" is enabled in bios, the notebook does suspend. But after opening the panel, the notebook completely freezes. If the suspend only takes a few minutes, then everything is working fine. But if the suspend takes a time more than five or ten minutes, the system completely freezes. The error message is: [<c032bbe7>] syscall_call+0x7/0xb [<c032007b>] xfrm_find_acq_byseq+0x100/0x10f Badness in i8042_panic_blink at drivers/input/serio/i8042.c:992 [<c0254fe6>] i8042_panic_blink+0x188/0x1a0 [<c0123ea2>] panic+0xf7/0x142 [<c010cd7a>] set_rtc_mmss+0x6c/0x204 My system: # cat /etc/grub.conf | grep kernel kernel /vmlinuz-2.6.9-67.plus.c4 ro root=/dev/VolGroup00/LogVol00 noapic acpi=off rhgb quiet # lspci 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02) 00:04.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 12) 00:05.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:05.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:05.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:05.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:09.0 Communication controller: Toshiba America Info Systems FIR Port (rev 23) 00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05) 00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05) 05:00.0 Network controller: RaLink RT2561/RT61 802.11g PCI The system freezes too, if com-ports and sound is disabled in bios. Could the network controller 'RaLink' causes this problem? I am using the centosplus kernel cause of its support for isa sound cards. Is there an other kernel with that I could avoid this panic? Thank you very much! regards Olaf

1 0

CentOS-announce Digest, Vol 34, Issue 14
by centos-announce-request＠centos.org 22 Dec '07

22 Dec '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:1166 Moderate CentOS 4 i386 libexif - security update (Johnny Hughes) 2. CESA-2007:1166 Moderate CentOS 4 x86_64 libexif - security update (Johnny Hughes) 3. CESA-2007:1177 Important CentOS 4 x86_64 autofs5 - security update (Johnny Hughes) 4. CESA-2007:1177 Important CentOS 4 i386 autofs5 - security update (Johnny Hughes) 5. CESA-2007:1083 Moderate CentOS 4 i386 thunderbird - security update (Johnny Hughes) 6. CESA-2007:1083 Moderate CentOS 4 x86_64 thunderbird - security update (Johnny Hughes) 7. CESA-2007:1104 Important CentOS 4 x86_64 kernel - security update (Johnny Hughes) 8. CESA-2007:1104 Important CentOS 4 i386 kernel - security update (Johnny Hughes) 9. CESA-2007:1104 Important CentOS 4 ia64 kernel - security update (Pasi Pirhonen) 10. CESA-2007:1083 Moderate CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 21 Dec 2007 10:13:17 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2007:1166 Moderate CentOS 4 i386 libexif - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <476BE61D.4080708(a)centos.org> Content-Type: text/plain; charset="iso-8859-1" CentOS Errata and Security Advisory 2007:1166 https://rhn.redhat.com/errata/RHSA-2007-1166.html The following updated files have been uploaded and are currently syncing to the mirrors: i386: libexif-0.5.12-5.1.0.2.el4_6.1.i386.rpm libexif-devel-0.5.12-5.1.0.2.el4_6.1.i386.rpm src: libexif-0.5.12-5.1.0.2.el4_6.1.src.rpm

1 0

centos 5.1 vnc crashing
by Jerry Geis 22 Dec '07

22 Dec '07

Hi all, I was running centos 4.5 with not issues on my main box. I updated to (fresh install) to 5.1 Things run fine except I use vnc alot from home to connect back into my machine and sometimes on connecting it is crashing the vnc session and then it kills my entire login session. Is anyone else having this on 5.1? This is my modules section in xorg.conf Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" Load "vnc" EndSection It worked flawlessly on centos 4.5. Any ideas about how to get it not to crash. Jerry

1 0

4.6 update overwrote my /usr/lib/python2.3/site.py file
by Jeff Larsen 22 Dec '07

22 Dec '07

We had some custom additions to our site.py file for a third party application. 'yum update' to 4.6 overwrote the file with no backup or warning. Not hard to repair, but it did have me worried there for a few minutes when the application failed to start. Is this a python issue, an upstream issue or a CentOS issue? Can something be done about it going forward? Jeff

3 5

SCSI bad block table display
by Hugh E Cruickshank 21 Dec '07

21 Dec '07

Hi All: Is there a utility available that will allow for the dump/display of the bad track table of a SCSI drive. We had this capability on SCO OSR5 but I have not been able to locate anything similar for Linux. The closest I have found is the badblocks utility that is part of the e2fsprogs package but this appears to only test for bad blocks not display the current bad block table contents. I have done quite a bit of searching with Google but either it does not exist or (more than likely) I am using the wrong search parameters. TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

4 6

yum updates
by centos＠911networks.com 21 Dec '07

21 Dec '07

Hi, Is there a way to still do the yum updates but not update the openoffice. Right now, I do it one at a time. -- Thanks http://www.911networks.com When the network has to work

5 7

5.0->5.1 upgrade problems
by Andreas Kuntzagk 21 Dec '07

21 Dec '07

Hi, I try to upgrade a 5.0 desktop to 5.1. Some packages give me errors. Most important the kernel and e2fsprogs: [root@scarbo9 ~]# yum update kernel Loading "allowdowngrade" plugin Loading "installonlyn" plugin Loading "fastestmirror" plugin Setting up Update Process Setting up repositories extras 100% |=========================| 1.1 kB 00:00 updates 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 addons 100% |=========================| 951 B 00:00 Loading mirror speeds from cached hostfile Reading repository metadata in from local files Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package kernel.x86_64 0:2.6.18-53.1.4.el5 set to be installed --> Running transaction check --> Processing Conflict: kernel conflicts e2fsprogs < 1.37-4 --> Restarting Dependency Resolution with new changes. --> Populating transaction set with selected packages. Please wait. ---> Package e2fsprogs.x86_64 0:1.39-10.el5 set to be updated --> Running transaction check --> Processing Conflict: kernel conflicts e2fsprogs < 1.37-4 Error: No Package Matching kernel.x86_64 I'm a little bit confused about this error. Any hints? regards, Andreas

4 11

Peter Kastegård is out of the office.
by Peter.Kastegard＠cygrids.com 21 Dec '07

21 Dec '07

I will be out of the office starting 2007-12-21 and will not return until 2008-01-07. If you have any questions or technical issues please contact the support at support(a)cygrids.com or call +46-(0)413-19280. Cheers, //Peter

1 0

Monitor Blanking
by Manuel Leon 21 Dec '07

21 Dec '07

Hi to everyone. I would like to control the timing of the automatic blanking of the monitor (occurs within few minutes of inactivity). I have been unable to find where or how to control it. Can someone help me? Thanks in advance. Manuel Leon

4 3

File description left open in LVM
by Reuben D. Budiardja 21 Dec '07

21 Dec '07

Hello, I used to have LVM on my machine to combine the capacity of a hard drive and a partition on a different drive as one volume group. I had problem with one of the disk but I was able to remove all the data of the computer, and replace the disk, and add another disk Now I want to start over and create LVM again. However, I keep getting this message: # vgdisplay File descriptor 128 left open File descriptor 129 left open No volume groups found # pvdisplay File descriptor 128 left open File descriptor 129 left open What does this mean ? Also, in /etc/lvm I found archive/ and backup/ directory which seems to refer to my old LVM, and also .cache. Are they safe to remove ? Thank you for any help. RDB

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
38
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2007