Discuss February 2007

discuss@lists.centos.org

259 participants
310 discussions

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

Thanks. I did it. [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod --with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL this time it worked. now it shows new modules. pls see below. [root@gateway boot]# gunzip -cd initrd-2.6.9-42.0.8.EL.img |cpio -t . etc etc/udev etc/udev/udev.conf init lib lib/libata.ko lib/jbd.ko lib/ext3.ko lib/sd_mod.ko lib/scsi_mod.ko lib/ata_piix.ko proc loopfs bin bin/udevstart bin/insmod bin/udev bin/hotplug bin/nash bin/modprobe sbin dev dev/console dev/null dev/tty1 dev/systty dev/tty2 dev/ram dev/tty3 dev/tty4 sysroot sys 2147 blocks then I did the below steps. [root@gateway etc]# cd /boot/ [root@gateway boot]# cp initrd-2.6.9-42.0.8.EL.img initrd-2.6.9-42.0.8.EL.img.8feb2007 [root@gateway boot]# cd [root@gateway ~]# cp initrd-2.6.9-42.0.8.EL.img /boot/ cp: overwrite `/boot/initrd-2.6.9-42.0.8.EL.img'? y Now it has newly rebiult /boot/initrd-2.6.9-42.0.8.EL.img. Now I only need to restart the Server. To do that, It takes some time as users are getting emails . After the reboot, I will let you know. THNAK YOU VERY MUCH. On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > Indunil Jayasooriya wrote: > > i removed .ko from all and then gave the below error. > > > > [root@gateway etc]# cd /boot/ > > > > [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod > > with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img > > 2.6.9-42.0.8.EL > > usage: mkinitrd [--version] [-v] [-f] [--preload <module>] > > [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules] > > [--with=<module>] [--image-version] [--fstab=<fstab>] > [--nocompress] > > [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version> > > > > (ex: mkinitrd /boot/initrd-2.2.5-15.img 2.2.5-15) > > > > I think path is not set properly. > > No. You missed the '--' in with=ata_piix > -- Thank you Indunil Jayasooriya

1 0

Beagle on CentOS 4.4
by Timothy Kesten 08 Feb '07

08 Feb '07

Hi Folks, is there someone who has desktop-search-engine Beagle installed on CentOS 4.4? If so - can you give me some hints (links, howtos)? Thx Timothy

1 0

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

i removed .ko from all and then gave the below error. [root@gateway etc]# cd /boot/ [root@gateway boot]# mkinitrd --with=sd_mod --with=scsi_mod with=ata_piix --with=libata /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL usage: mkinitrd [--version] [-v] [-f] [--preload <module>] [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules] [--with=<module>] [--image-version] [--fstab=<fstab>] [--nocompress] [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version> (ex: mkinitrd /boot/initrd-2.2.5-15.img 2.2.5-15) I think path is not set properly. On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > Indunil Jayasooriya wrote: > > On 2/8/07, *Feizhou* <feizhou(a)graffiti.net > > <mailto:feizhou@graffiti.net>> wrote: > > > > You are missing > > > > lib/sd_mod.ko > > lib/scsi_mod.ko > > lib/ata_piix.ko > > lib/libata.ko > > > > Try: mkinitrd --with=sd_mod.ko --with=scsi_mod.ko --with=ata_piix.ko > > --with=libata.ko /root/initrd-2.6.9-42.0.8.EL.img 2.6.9-42.0.8.EL > > > > > > > > i tried it . i did the below . I did the below , First I changed to > > /boot directory. > > > > [root@gateway ~]# cd /boot/ > > > > [root@gateway boot]# mkinitrd --with=sd_mod.ko --with=scsi_mod.ko > > --with=ata_piix.ko --with= libata.ko /root/initrd-2.6.9-42.0.8.EL.img > > 2.6.9-42.0.8.EL > > > > it says the below > > > > No module sd_mod.ko found for kernel 2.6.9-42.0.8.EL, aborting. > > oops, sorry, chop the '.ko' from all the module names. > -- Thank you Indunil Jayasooriya

1 0

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

I have already set it. pls see below title CentOS (2.6.9-42.0.8.EL) root (hd0,0) kernel /vmlinuz-2.6.9-42.0.8.EL ro root=LABEL=/ rhgb quiet initrd /initrd-2.6.9-42.0.8.EL.img On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > You can set your grub.conf back to the label /. > -- Thank you Indunil Jayasooriya

1 0

Re: [CentOS] kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

Hi , Thanks for your quick responce. How to build a new initrd ? On 2/8/07, Feizhou <feizhou(a)graffiti.net> wrote: > > > > last kernel contains more than the new kernel . > > Actually, the latest kernel is missing libata and maybe them scsi modules. > > > > > one is below > > lib/scsi_mod.ko > > > > that is scsi. Is is the one going with sata? > > You need libata, sd_mod too I guess. > > > > > how to solve thsi issuse? > > > > futher help needed. > > You need to build a new initrd. Hang on. > > > > > > > > > On 2/8/07, *Feizhou* <feizhou(a)graffiti.net > > <mailto:feizhou@graffiti.net>> wrote: > > > > Indunil Jayasooriya wrote: > > > > > > > > > eh? > > > > > > Is it sata? Maybe the sata driver is missing in your initrd > > image? > > > > > > > > > > > > Yeah, It is sata, Hpw to get to know wherether sata drivers are > > miinig > > > or not? > > > > > > iamge is below > > > > > > initrd-2.6.9-42.0.8.EL.img > > > > > > It is binary . > > > > > > futhernhelp is needed. > > > > It is a gzipped cpio image. > > > > Run 'gunzip -cd initrd-2.6.9-42.0.8.EL.img |cpio -t' to find out > what is > > in it. > > > > > > > > > > -- > > Thank you > > Indunil Jayasooriya > > -- Thank you Indunil Jayasooriya

1 0

kernel 2.6.9-42.0.8.EL error while booting - CentOS 4.4
by Indunil Jayasooriya 08 Feb '07

08 Feb '07

Hi , I am ruuning Senmail with MailScanner on CentOS 4.4. It has updated to kernel 2.6.9-42.0.8.EL from its past kernel 2.6.9-42.0.3.EL. Now the Server can not boot up and gives the below error. mkrootdev: label / not found Mounting root filesystem mount: error 2 mouting ext3 switchroot: mount failed: 22 Kernel panic - not syncing: Attempted to kill init! But I can boot up from its last kernel 2.6.9-42.0.3.EL. I have booted it up from that kernel. But I wnat to rectify that new kernel error in order to boot from that kernel. Help needed. -- Thank you Indunil Jayasooriya -- Thank you Indunil Jayasooriya

3 4

USB-HDD cannnot connect automatically
by n.uryu 08 Feb '07

08 Feb '07

Hi all, I got a USB-HDD, but it doesn't looked like connect and cannot mount it just after PC boot. But insert and remove a usb cable from PC, it connect (with hotplug?) Is there any good how-to's for getting a usb-HDD to auto connect when It is booted the computer? lsmod is following: [lsmod of just after boot] Module Size Used by Not tainted parport_pc 19076 1 (autoclean) lp 9028 0 (autoclean) parport 37088 1 (autoclean) [parport_pc lp] autofs 13364 0 (autoclean) (unused) e1000 71712 1 floppy 58160 0 (autoclean) microcode 4724 0 (autoclean) keybdev 2976 0 (unused) mousedev 5524 0 (unused) hid 22212 0 (unused) input 5888 0 [keybdev mousedev hid] ehci-hcd 20104 0 (unused) usb-uhci 26412 0 (unused) usbcore 79392 1 [hid ehci-hcd usb-uhci] ext3 91592 9 jbd 52336 9 [ext3] [lsmod of insert and remove a usb cable] Module Size Used by Not tainted sd_mod 13776 2 (autoclean) usb-storage 74624 1 scsi_mod 108968 2 [sd_mod usb-storage] parport_pc 19076 1 (autoclean) lp 9028 0 (autoclean) parport 37088 1 (autoclean) [parport_pc lp] autofs 13364 0 (autoclean) (unused) e1000 71712 1 floppy 58160 0 (autoclean) microcode 4724 0 (autoclean) keybdev 2976 0 (unused) mousedev 5524 0 (unused) hid 22212 0 (unused) input 5888 0 [keybdev mousedev hid] ehci-hcd 20104 0 (unused) usb-uhci 26412 0 (unused) usbcore 79392 1 [usb-storage hid ehci-hcd usb-uhci] ext3 91592 10 jbd 52336 10 [ext3] Enviroment is following: [Enviroment] - Computer : FM V ESPRIMO C5200 (Fujitsu) - USB-HDD : I-O DATA USB-HDD - OS : CentOS version.3 If need to other information about problem solving, I will post. -- Regards Naoaki Uryu

1 0

Problems loading CentOS 4.4 on ASUS M2N-MX mobo
by Ed Burgstaler 08 Feb '07

08 Feb '07

I have a brand new ASUS MB model M2N-MX which is giving me issues when installing Centos 4.4 64 bit I initially had problems with finding the SATA drives but I resolved that issue by simply selecting the NVIDIA SATA (sata_nv)driver from the list of drivers during the initial install. The install seemed to go fine after that as the installer uses the Generic VESA video driver during the install, however, upon the restart after the install, the server then completely locks up. I can only assume it is at the point of loading the video driver although I really don't know what CentOS loads after the "acivating local loopback" section, because that is where it freezes on the screen. I'm thinking that the install to the SATA drive went well since it boots from the drive though it doesn't exactly boot completely. I have tried reinstalling several times already with the same negative results. Would appreciate any help that someone could offer in getting this working with this new MB. Here are the specs of the MB: -Key Specifications: NC-AS-M2N-MX Form Factor: uATX, 9.6" x 8.8" CPU - Support AMD Socket AM2 Athlon 64 X2 / Athlon 64 FX / Athlon 64/ Sempron Chipset - NVIDIA nForce430/GeForce6100 Front Side Bus - 2000 / 1600 MT/s Memory - Dual channel memory architecture - 4 x 240-pin DIMM, support max. 4GB DDR2 800/667/533 ECC and non-ECC,un-buffered memory VGA - Integrated GeForce 6100 GPU - High Definition Video Processing with max. resolutions to 1920 x 1440 Expansion Slots - 1 x PCI Express x16 - 1 x PCI Express x1 - 2 x PCI Storage/RAID - NVIDIA MCP61P - 1 x UltraDMA 133/100/66/33 - *4 x Serial ATA 3Gb/s with RAID 0, RAID 1, RAID 0+1, RAID 5 & JBOD NVIDIA MediaShield? RAID 0, 1, 0+1, 5 and JBOD span cross Serial ATA drives LAN - NVIDIA MCP61P built-in Gigabit MAC with external Attansic PHY Audio - ADI AD1986A High Difinition Audio 5.1channel CODEC - Support Jack-Sensing and S/PDIF out interface USB - 10 USB2.0/1.1 ports Manageability - WfM 2.0, DMI 2.0, WOL by PME, WOR, PXE, Chassis Intrusion BIOS - 4Mb Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.3, ACPI 2.0 Overclocking Features - SFS (Stepless Frequency Selection) from 200MHz to 230MHz at 1MHz - increment - Adjustable Voltage : - *core: @ 0.025V stepping - *chipset: 2- stepping - *ddr: 4- stepping - Overclocking Protection: - ASUS C.P.R.(CPU Parameter Recall) Special Features - ASUS Q-Fan - ASUS My Logo 2 - ASUS CrashFreeBIOS2 - ASUS EZ Flash 2 Back Panel I/O Ports - 4 x USB 2.0 ports - 1 x RJ45 - 1 x COM1 - 1 x PS/2 Mouse - 1 x 5.1 channel Audio I/O - 1 x PS/2 Keyboard Internal I/O Connectors - 3 x USB 2.0 connector supports additional 4 USB 2.0 ports - 1 x S/PDIF output connector - High Definition Front panel audio connector - 4-pin CPU Fan / 2*Chassis Fan connectors - Chassis Intrusion connector - CD audio-in connector - 24-pin ATX power connector - 4-pin ATX 12V Power connector Accessories - 1 x Serial ATA cables - 1 x FDD cable - 1 x SATA power cable - 1 x I/O Shield - 1 x UltraDMA 133/100/66 cable - User's manual - 1 x COM1 - 1 x PS/2 Mouse - 1 x 5.1 channel Audio I/O - 1 x PS/2 Keyboard Internal I/O Connectors - 3 x USB 2.0 connector supports additional 4 USB 2.0 ports - 1 x S/PDIF output connector - High Definition Front panel audio connector - 4-pin CPU Fan / 2*Chassis Fan connectors - Chassis Intrusion connector - CD audio-in connector - 24-pin ATX power connector - 4-pin ATX 12V Power connector Accessories - 1 x Serial ATA cables - 1 x FDD cable - 1 x SATA power cable - 1 x I/O Shield - 1 x UltraDMA 133/100/66 cable - User's manual

5 4

RE: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver -Correction
by Mark Hull-Richter 08 Feb '07

08 Feb '07

None of that worked. When I edited out the HWADDR lines, I got this instead: Feb 7 06:36:34 sparenode1 network: Setting network parameters: succeeded Feb 7 06:36:34 sparenode1 network: Bringing up loopback interface: succeeded Feb 7 06:36:34 sparenode1 ifup: e1000 device eth0 does not seem to be present, delaying initialization. Feb 7 06:36:34 sparenode1 network: Bringing up interface eth0: failed Feb 7 06:36:34 sparenode1 ifup: e1000 device eth1 does not seem to be present, delaying initialization. Feb 7 06:36:34 sparenode1 network: Bringing up interface eth1: failed Hwconf did not change significantly when I ran kudzu, so I have no idea what's going on here. Again, this works exactly as is on 32-bit builds. It only fails on the 64 bit build. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Radu Radutiu Sent: Wednesday, February 07, 2007 5:47 AM To: CentOS mailing list Subject: Re: [CentOS] Problem with 2.6.11.4 kernel and e1000 driver -Correction Editing out HWADDR should fix your problem. Another possible solution is to check that the value in the HWADDR line in /etc/sysconfig/network-scripts/ifcfg-ethX is the same as listed in the /etc/sysconfig/hwconf for the corresponding network interface. Also make sure that the files /etc/sysconfig/networking/devices/ifcfg-ethX and /etc/sysconfig/network-scripts/ifcfg-eth0 are hard links to the same file. You can regenerate the content of the /etc/sysconfig/hwconf by removing it and running kudzu again.

2 1

Support of Marvel Yukon Gigabit Ethernet
by devel 08 Feb '07

08 Feb '07

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

4 3

← Newer
1
...
22
23
24
25
26
27
28
...
31
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss February 2007