Discuss February 2007

discuss@lists.centos.org

259 participants
310 discussions

RE: [CentOS] XFS for CentOS 2.6.9-42.0.8 [ was: issue - nokeyboard after reboot]
by Mark Hull-Richter 16 Feb '07

16 Feb '07

Got it - thanks! > -----Original Message----- > From: centos-bounces(a)centos.org > [mailto:centos-bounces@centos.org] On Behalf Of Johnny Hughes > Sent: Friday, February 16, 2007 9:59 AM > To: CentOS ML > Subject: Re: [CentOS] XFS for CentOS 2.6.9-42.0.8 [ was: > issue - nokeyboard after reboot] > > You pass in the kernel version as an argument. You need to download: > > http://mirror.centos.org/centos/4/centosplus/SRPMS/kernel-modu > le-xfs-2.6.9-42.0.3.ELsmp-0.2-1.src.rpm > > Install it and read the spec file, it tells you how to pass > in the kernel version to get it to build. > > >

1 0

XFS for CentOS 2.6.9-42.0.8 [ was: issue - no keyboard after reboot]
by Mark Hull-Richter 16 Feb '07

16 Feb '07

Okay, so far so good - and many thanks to all who jumped in on this one. Now, we would like to look into making some changes in XFS, but I didn't see a SRPM for the kernel-module-xfs for 42.0.8 - the most recent one is for 42.0.3. Is this usable, or is there somewhere (else?) I can get the SRPM for the 42.0.8 XFS? Thanks. > -----Original Message----- > From: centos-bounces(a)centos.org > [mailto:centos-bounces@centos.org] On Behalf Of Jim Perrin > Sent: Thursday, February 15, 2007 12:18 PM > To: CentOS mailing list > Subject: Re: [CentOS] CentOS 2.6.9-42.0.8 issue - no keyboard > after reboot > > Yes, there are. The base kernel does not have xfs support. > The php5 packages in centosplus is a move away from the base > packages of php4, etc. As Ralph has pointed out, you should > not globally enable the repository, but instead pick and > choose the packages you want for example, in your case, the > xfs module. >

3 2

CentOS-announce Digest, Vol 24, Issue 8
by centos-announce-request＠centos.org 16 Feb '07

16 Feb '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0060 Moderate CentOS 3 ia64 samba - security update (Pasi Pirhonen) 2. CESA-2007:0060 Moderate CentOS 4 ia64 samba - security update (Pasi Pirhonen) 3. CESA-2007:0015 Moderate CentOS 3 ia64 ImageMagick - security update (Pasi Pirhonen) 4. CESA-2007:0015 Moderate CentOS 4 ia64 ImageMagick - security update (Pasi Pirhonen) 5. CESA-2007:0015 Moderate CentOS 3 i386 ImageMagick - security update (Tru Huynh) 6. CESA-2007:0015 Moderate CentOS 3 x86_64 ImageMagick - security update (Tru Huynh) 7. CESA-2007:0060 Moderate CentOS 3 i386 samba - security update (Tru Huynh) 8. CESA-2007:0060 Moderate CentOS 3 x86_64 samba - security update (Tru Huynh) 9. CESA-2007:0060 Moderate CentOS 3 s390(x) samba - security update (Pasi Pirhonen) 10. CESA-2007:0060 Moderate CentOS 4 s390(x) samba - security update (Pasi Pirhonen) 11. CESA-2007:0015 Moderate CentOS 3 s390(x) ImageMagick - security update (Pasi Pirhonen) 12. CESA-2007:0015 Moderate CentOS 4 s390(x) ImageMagick - security update (Pasi Pirhonen) 13. CESA-2007:0060 Moderate CentOS 4 x86_64 samba - security update (Johnny Hughes) 14. CESA-2007:0060 Moderate CentOS 4 i386 samba - security update (Johnny Hughes) 15. CESA-2007:0015 Moderate CentOS 4 x86_64 ImageMagick - security update (Johnny Hughes) 16. CESA-2007:0015 Moderate CentOS 4 i386 ImageMagick - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 15 Feb 2007 22:16:08 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0060 Moderate CentOS 3 ia64 samba - security update To: centos-announce(a)centos.org Message-ID: <20070215201608.GM11744(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0060 https://rhn.redhat.com/errata/RHSA-2007-0060.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/samba-3.0.9-1.3E.12.ia64.rpm updates/ia64/RPMS/samba-client-3.0.9-1.3E.12.ia64.rpm updates/ia64/RPMS/samba-common-3.0.9-1.3E.12.ia64.rpm updates/ia64/RPMS/samba-swat-3.0.9-1.3E.12.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Re: [CentOS] Re: %include command in Kickstart
by Al Sparks 16 Feb '07

16 Feb '07

>Al Sparks spake the following on 2/15/2007 4:44 PM: >>> One of the images (in Nahant) is to boot off the CD and install >>> from the network. >>> >>> That should work BUT I've only used it to get the entire ks file >>> off the LAN. Booting from a CD is quick and easy (provided you >>> have a CD drive as in this instance). >>> >>> Probably the %include will work fairly easily if the original ks file's >>> obtained via NFS; otherwise I suspect you'll need to do the mount; >>> in %pre >> >> How would I access the whole ks.cfg file on an nfs w/o dhcp? >> >> That would be ideal. >> === Al >> >> >> > Assign an ip address during the boot process, and have everything > referenced by ip address, instead of names. At the boot prompt, I did the following: linux ksdevice=eth0 ip=10.254.254.125 netmask=255.255.255.0 gateway=10.254.254.1 dns=10.1.1.21 ks=nfs:10.254.242.33:/vol/updts/staging/CentOS_4.3/ks.cfg I get a blue screen with "Welcome to CentOS-4 i386" in the left upper corner, with the typical navigation key instructions at the bottom. It just hangs there. I ping the IP address above, and get no pongs. Suggestions? === Al

2 1

Firefox 2.0
by Barton Callender 16 Feb '07

16 Feb '07

Good day, I know this is simple but I cant seem to figure this out. I have firefox 2.0 installed and its running fine. The problem is how to get the system defaults to work with it. For instance, if I wanted to install the adobe rpm from their website, how do I get firefox2.0 to prompt me for the default application to install it. Or if I downloaded a .tar.gz and wanted to extract it, how to do get firefox to prompt for that default application. Regards _________________________________________________________________ Want a degree but can't afford to quit? Top school degrees online - in as fast as 1 year http://forms.nextag.com/goto.jsp?url=/serv/main/buyer/education.jsp?doSearc…

1 0

test
by Susinthiran Sitham 16 Feb '07

16 Feb '07

test

1 0

Wireless and kernelproblem on IBM Z61m
by Mats Hellman 16 Feb '07

16 Feb '07

Just got almost everything set up on my IBM/Lenovo Z61m and now wondering if there is a graphical tool to set up wireless networking. Also for some reason the kernel 2.6.9-42.0.3 and 2.6.9-42.0.8 hang if rc.sysinit includes the sound initialization. I've tried the plus kernel also and the same thing happens there. The only one working is 2.6.9-22 but on that one networking doesn't. If anyone has any idea of how to start debuging this problem let me know. The dmesg output from the kernel 2.6.9-22 can be found at: http://ssh.nixadmins.net/~mahellma/dmesg_z61m.txt And the output from 2.6.9-42 at: http://ssh.nixadmins.net/~mahellma/z61m_2.6.9-42.0.8.EL_dmesg.txt Any help welcome. -- Mats Hellman Nätverkstekniker / Verkkoteknikko / Network technician Samfundet Folkhälsan Topeliusgatan 20 / Topeliuksenkatu 20 00250 Helsingfors / 00250 Helsinki Finland +358 9 315 5353 +358 50 467 5758 @ mats.hellman(a)folkhalsan.fi Public key: https://iris.folkhalsan.fi/crt/MatsHellman.asc

1 0

xkbset
by Maciej Zenczykowski 16 Feb '07

16 Feb '07

Anybody know which package this utility (xkbset) is in? I'm pretty sure I had it installed and it was uninstalled by the latest series of upgrades... Thanks, Maciej

1 0

Clamav .90x that worked for me
by rado 16 Feb '07

16 Feb '07

I always update clamav from dag but this time it gave me fits. On a clean install of clamav ver .90 that I did...after first completely erasing (rpm -e clamav ...etc for all clamav files), I then installed ver 9.0 and the fix for me was to edit /etc/sysconfig/clamav-milter in 2 places: completely remove the line: dont-log-clean don't just comment it out...in the flags, it has to be removed and also on the socket line ...should start by -obl...edit it to -ol I think also in /etc/crond.conf you should also edit the commented line: #LogClean to LogClean yes I didn't edit /etc/crond.conf on this machine but am fixing to right now...although it works w/out it thx John Rose

4 4

Re: [CentOS] %include command in Kickstart
by Al Sparks 16 Feb '07

16 Feb '07

> Al Sparks : > > I have a kickstart file that basically runs the following: > > > > install nfs --server=nfserver.blah.local --dir=/vol/updts/staging/CentOS_4.3 > > #include %some_file.cfg > > > > I want to be able to access or "include" a file on the nfs share not the > > local CDROM I've got this on. How do I do that? > > the correct syntax is '%include', not '#include' and the NFS > server must be given with its IP address, not the DNS name: The "#include" was a typo. I did get it right in my subject line. Also, my network configuration includes a local DNS, so I've been able to reach the NFS server by name. But it occurs to me that I need to place that information on the ks.cfg file on the cdrom portion, not the "some_file.cfg" located on the nfs share. > install nfs --server=1.2.3.4 --dir=/vol/updts/staging/CentOS_4.3 > %include /path/to/file > > Once the installation system is running, the mount point for the > used NFS share by directive "install" is /mnt/source . The really great info you gave me is the mount point the nfs command uses. [snip] > my $ 0.02 > > Pierre Bourgin Thanks. === Al

4 4

← Newer
1
...
12
13
14
15
16
17
18
...
31
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss February 2007