Discuss March 2007

discuss@lists.centos.org

337 participants
401 discussions

software raid
by Dave 04 Apr '07

04 Apr '07

Hello, I've got a 4.4 box that i'd like to implement software raid on. Does anyone have any experiences with this? Thanks. Dave.

23 81

Pronounced...?
by Miark 03 Apr '07

03 Apr '07

Is CentOS pronounced as a word, or as cent-oh-es? Miark

6 5

tzdata update, but no announcement?
by Joe Pruett 02 Apr '07

02 Apr '07

i see one available in the repos, but i don't recall seeing any announcement about it. from googling, it does seem to be real, but still a bit disconcerting to not have an announcement about it.

7 12

CentOS 5 beta upgrade path
by eric＠austinconventioncenter.com 02 Apr '07

02 Apr '07

How hard would it be to upgrade from CentOs 5 beta to the released version? Would it be as simple as a yum upgrade or would I have to upgrade via booting from cd/dvd/pxe ? Pardon my ignorance if this has been asked already -Eric

7 9

Help with fdformat
by Robert Moskowitz 02 Apr '07

02 Apr '07

At: http://www.serverelements.com/naslite.php the following command is supplied near the bottom: **fdformat /dev/fd0u1722 ** I have plugged in my USB floppy drive and have a /media/floppy I get no such file or directory with this command. And what is this with a 1722 formatted floppy. What I do a man fdformat, 1722 is not listed....

3 2

CentOS 5 Minimal Install
by Brett Serkez 02 Apr '07

02 Apr '07

Performing a test install of CentOS 5, I no longer have the capability of requesting a minimal install as their was in CentOS 4. Is there any possibility this could added back in before final release? Thank you, Brett

7 8

Wait for 5 or just use 4.4?
by Cen Tos 02 Apr '07

02 Apr '07

I'm a relative newbie to all this so pardon me if the following are all stupid questions. Firstly, I'm setting up a web server and gone from planning to use Ubuntu (due to some familiarity as a desktop at home) to CentOS based on recommendations by experienced webhosters. However now that I looked into CentOS, I find myself at a point where it's transitting to a major new version. So the key question for me is, should I wait for CentOS 5 to be released or just go for 4.4? Being rather new to Linux, my attempts to try to figure out the differences between the two has been rather futile since I can't readily tell what is really important to me or not. All that I think I'm sure of now is that 5 would support virtualization using Xen and 4.4 doesn't have it. This alone is food for thought since the idea of being able to compartalize each website in their own VM sounds good in the long run. I'm tempted to wait for 5 since I'm reluctant to run the risk of having to upgrade a live server to version 5 and have it failed specutacularly if I screw it up. On the other hand, it's uncertain when 5 will be out and definitely waiting more than another 2 weeks isn't quite acceptable without compelling reasons. Hence I'll appreciate it if the knowledgeable folks on this mailing list can advise which is the wiser route to go. Some additional information which may be relevant to the decision. 1. RAID : Was planning to run "hardware" RAID 1 on the server and has noted comments that software RAID 1 on Linux may be better than raid 1 using onboard firmware controllers. 2. Software that would be running on the server would include Apache 2.xwith ASPx support, php 5.x, MySQL 5.x, Exim, ProFTPD, Direct Admin (supposed to be developed on RH and one user apparently tested it to work right out of the box with 5 Beta, part of the reason why I decided to go with CentOS) 3. Hardware to be used would be Intel Core 2 Duo on an Asus P5B-VM-D0 (Q965, ICH8-D0, Intel GMA3000 GPU) with SATA hard disks. 4. Network bandwidth control based on request IP or domains (i.e. connections to IP #1 can be limited to 512Kbps, while connections to IP #2 can be limited to 1024Kbps, or connections to www.domainA.com is limited to 256Kbps etc. Thanks!

23 39

Centos 4.92
by John Summerfield 01 Apr '07

01 Apr '07

I'm looking at the first ISO image (I only have two so far), and I don't see instructions a repo for preparing for a network install. It used to be basically copy all the RedHat/Fedora/CentOS directories to a common location. Then one booted from the network, CD or whatever and gor right into it. The last part I'm sure is substantially the same as before, but we do need a new recipe for creating the repo. If it's "on the internet," I can't get at it at present; nor will I for a few days. -- Cheers John -- spambait 1aaaaaaa(a)coco.merseine.nu Z1aaaaaaa(a)coco.merseine.nu Please do not reply off-list

6 16

snmp on centos 3.x x86_64
by Les Mikesell 01 Apr '07

01 Apr '07

I'm trying to use opennms to collect data from some CentOS3.x x86_64 boxes but I am getting an error "Integer too large: cannot decode" that http://bugzilla.opennms.org/cgi-bin/bugzilla/show_bug.cgi?id=1316 says is a bug in net-snmp that was fixed in a later version. However, when I try to build the 5.4.1 src.rpm from sourceforge I get "/usr/lib/libpopt.so: could not read symbols: Invalid operation" although it builds OK on a 32 bit system. Has anyone worked around this problem? Or is it really a bug in opennms? -- Les Mikesell lesmikesell(a)gmail.com

3 3

kernel-devel rpm
by Dave 01 Apr '07

01 Apr '07

Hello, I'm trying to install VirtualBox on a test CentOS 4.4 system following the guide on howtoforge. As a preliminary i'm trying to retrieve the kernel-devel rpm, which contains the headers and libs needed to compile kernel modules. I've tried: yum install kernel-devel as well as added an arch to that in this case i686 and i keep getting the msg nothing to do. The only item i can think of is i have enabled the protectbase yum plugin, if this is my problem i'd like to make this file an exception. My kernel version is 2.6.9, the default one that came with CentOS if that matters. Any suggestions welcome. Thanks. Dave.

3 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2007