Discuss June 2007

discuss@lists.centos.org

280 participants
339 discussions

key bindings
by Jerry Geis 13 Jun '07

13 Jun '07

I am trying to bind keys on centos 5. I want to run my own APP when I hit keypad 4 and a different APP when I hit keypad 5. I was looking at xmodmap but I dont see how to execute my own command? I was looking in the gnome keyboard shortcuts but I dont see how to enter a command it only lets you change the accelerator for a given action. Not create a new action. How can I setup keypad 4 and 5 to run app1 and app2 respectively? THanks, Jerry

1 0

freq scaling on centos 5
by Jerry Geis 13 Jun '07

13 Jun '07

In the old centos 4 we had cpuspeed and we could send a SIGUSR1 to it so the CPU would run at max speed. In centos 5 cpuspeed is not running. (although running with cpuspeed -C will go full speed) what is the correct way now in centos 5 to on the fly say run at full speed then sometime later tell it to drop back down? I have no process to signal any more. Jerry

1 0

anyone using a webcam on centos 4 /5
by Jerry Geis 13 Jun '07

13 Jun '07

Hi all, Was wondering if anyone was using a webcam on centos 4 or 5? I was thinking about getting one but wanted to make sure it will work. Any recommendations? Thanks, Jerry

3 2

Two Issues - Postfix and Gamin
by Brent DiNicola 13 Jun '07

13 Jun '07

Greetings, I have done a bit of searching and I have found that the 4.5 version of Postfix is the following rpm: postfix-2.2.10-1.1.el4.i386.rpm. I had previously had the CentOSPlus version with mysql compiled in and just recently upgraded to 4.5 from 4.4, upon doing this.. the above RPM was installed, which is greater than the postfix with mysql from CentOSPlus, which is the following rpm: postfix-2.2.10-1.RHEL4.2.mysql_pgsql.c4.i386.rpm (note the 2.2.10-1 version without the extra .1 from above.) I tried to manually install the postfix with mysql but of course the versioning is greater on 4.5 rpm, is there a plan to fix this or should I try to roll my own RPM with mysql included? This happened to restart during a 5am auto yum update, causing my server to bounce this morning until I found it, ooops my bad! The second issue is also with 4.5 but with Gamin. I have about 20 Linux CentOS workstations that have been running nicely for several months (almost years) and after the 4.5 upgrade I have noticed that the gam_server process with Gamin keeps sucking up all the CPU cycles after a short time of running. (Sometimes tied to screen saver use but not always). I haven't changed anything in my environment that I can see would cause this problem after the 4.5 upgrade. (Same file server for NFS mounts, same autofs entries etc). Has anyone else noticed this issue and found a work around, I did some digging but most entries on this issue are from the 2005 range which didn't fix my issue and/or were for an older version. The /etc/gamin/gaminrc didn't fix it through various mutations of entries and short of removing the gam_server from libexec, I would like to find a solution or know if anyone else has experienced this issue. Thanks Brent PS. Great work guys on the OS, I have lurked on the Mailing lists for a number of years and you are doing outstanding work and support. Great JOB! -- Brent DiNicola/Whitewolf The Whitewolf of Imrryr <centos .AT. elric.net> http://www.elric.net Disclaimer: Any opinions expressed here are from my dog. Any liabilities fall to the dog.

2 2

ContOS5 and Samba-Vscan
by der knilch 13 Jun '07

13 Jun '07

Hi, I am running a CentOS 5 file server in our Windows network and I wanted to add a anti virus scanner. I got a clamav package from atrmps.net, but the samba module samba-vscan is missing. So I am not able to integrate clamav as an on-demand scanner. Does anyone know, where I can get the samba-vscan module? Thanks knilch

4 4

CentOS-announce Digest, Vol 28, Issue 10
by centos-announce-request＠centos.org 13 Jun '07

13 Jun '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0469 Low CentOS 3 s390(x) gdb - security update (Pasi Pirhonen) 2. CESA-2007:0436 Important CentOS 3 s390(x) kernel - updated kernel packages (Pasi Pirhonen) 3. CESA-2007:0430 Low CentOS 3 s390(x) openldap - security update (Pasi Pirhonen) 4. CESA-2007:0431 Low CentOS 3 s390(x) shadow-utils - security update (Pasi Pirhonen) 5. CESA-2007:0403 Moderate CentOS 4 x86_64 freetype - security update (Johnny Hughes) 6. CESA-2007:0403 Moderate CentOS 4 i386 freetype - security update (Johnny Hughes) 7. CESA-2007:0385 Moderate CentOS 4 i386 fetchmail - security update (Johnny Hughes) 8. CESA-2007:0385 Moderate CentOS 4 x86_64 fetchmail - security update (Johnny Hughes) 9. CESA-2007:0430 Low CentOS 3 i386 openldap - security and bug-fix update (Tru Huynh) 10. CESA-2007:0430 Low CentOS 3 x86_64 openldap - security and bug-fix update (Tru Huynh) 11. CESA-2007:0431 Low CentOS 3 i386 shadow-utils - security and bug fix update (Tru Huynh) 12. CESA-2007:0431 Low CentOS 3 x86_64 shadow-utils - security and bug fix update (Tru Huynh) 13. CESA-2007:0436 Important CentOS 3 i386 kernel - updated kernel packages (Tru Huynh) 14. CESA-2007:0436 Important CentOS 3 x86_64 kernel - updated kernel packages (Tru Huynh) 15. CESA-2007:0465 Moderate CentOS 3 i386 pam - security and bug fix update (Tru Huynh) 16. CESA-2007:0465 Moderate CentOS 3 x86_64 pam - security and bug fix update (Tru Huynh) 17. CESA-2007:0469 Low CentOS 3 i386 gdb - security and bug fix update (Tru Huynh) 18. CESA-2007:0469 Low CentOS 3 x86_64 gdb - security and bug fix update (Tru Huynh) 19. CESA-2007:0473 Moderate CentOS 3 i386 gcc - security and bug fix update (Tru Huynh) 20. CESA-2007:0473 Moderate CentOS 3 x86_64 gcc - security and bug fix update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 12 Jun 2007 21:21:01 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0469 Low CentOS 3 s390(x) gdb - security update To: centos-announce(a)centos.org Message-ID: <20070612182101.GU22723(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0469 https://rhn.redhat.com/errata/RHSA-2007-0469.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/gdb-6.3.0.0-1.138.el3.s390.rpm s390x: updates/s390x/RPMS/gdb-6.3.0.0-1.138.el3.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Problem with SquidGuard and DansGuardian
by Jun Salen 13 Jun '07

13 Jun '07

Hi All, I tried installing SquidGuard in a CentOS 4.5 server wit Squid as proxy from RPMForge but uninstalled it since I am having it fails to configure it correctly so I replace it using DansGuardian. But after configuring it and restarting the squid including start of dansguardian service, I observe that there was no effect on our client user. Our user are required have proxy settings on browser in order to browse. What did I miss please. Below are the portion from my dansguardian configuration: # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on #proxyport = 3128 proxyport = 8888 When I change the filterport to 80, there was an error starting dansguardian saying that "Error binding server socket (is something else running on the filter port? [80])", changing it to 8080 have no problem but not able to filter anything. Can anyone please give me pointer on how to do it right? Thanks. junji aisalen.webpress.com Linux Registered User #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

1 0

why glibc-profile package get obsolete?
by Robinson Tiemuqinke 13 Jun '07

13 Jun '07

Hi, Any one know why the glibc-profile is obsoleted on centos 5 (glibc 2.5)? I've checked the glibc.spec file and find that the --disable-profile option is enabled in the configuration command. So how the original profiling functions are implemented on glibc 2.5? Is there a new way to do the same/similar thing? Thanks a lot. ____________________________________________________________________________________ Luggage? GPS? Comic books? Check out fitting gifts for grads at Yahoo! Search http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz

1 0

gcc 4.x on centOS 5
by arnuld 13 Jun '07

13 Jun '07

i did Google and also searched CentOS web-site and CentOS 5 Release Notes but i did not find what GCC CentOS 5 uses. i need GCC 4.x for my C++ based project work. what GCC version CentOS 5 uses as default ? -- http://arnuld.blogspot.com/

4 3

centos 5 iptables
by CentOS List 13 Jun '07

13 Jun '07

Hi, I applied a set of iptables rules and started iptables without any trouble. But after i edited the rules and restarting it, it gives me "Applying iptables firewall rules: iptables-restore: line 35 failed". I looked into /etc/sysconfig/ for the mentioned file and it was not found. I did a quick check and locate only found /sbin/iptables-restore. I had done updatedb before using locate. Any ideas? thanks

3 6

← Newer
1
...
18
19
20
21
22
23
24
...
34
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2007