Discuss April 2008

discuss@lists.centos.org

252 participants
275 discussions

logging items to the console using centos 5.1
by Jerry Geis 14 Apr '08

14 Apr '08

I need to (occasionally) automatically drop out of X11 mode, recompile something, and then reboot. I can drop out of X11 with "init 3", works fine. I use "chvt 1" to ensure I am on virtual terminal 1 My recompile and reboot also work. The piece that doesnt work is: make | tee $LOGFILE I was expecting the output (stdout) to be virtual terminal 1. My LOGFILE has all commands in it from my successful recompile but I dont see anything on virtual terminal 1. How do I get the output of my make to show on the console and also in my logfile? Thanks, Jerry

2 1

install perl with setuid emulation
by Mail Administrator 14 Apr '08

14 Apr '08

Dear All, i would like to know how to install perl with setuid emulation since the default centos 5 wont install with the setuid emulation apprecite your help regards simon -- Network ADMIN: -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

fastrack channel?
by Rainer Traut 13 Apr '08

13 Apr '08

Dear all, will there be a fastrack channel for C5? What are the problems inventing one? Thx Rainer

7 7

mysql install
by hamood Iqbal 13 Apr '08

13 Apr '08

Hi, when i try to install mysql-server it gives me mirror error and also says package does not match the intended download? what is the issue hear. i already have lampp stack .when i try to install zenoss it still says that it need mysql although its included in lampp stack. Thanks

3 4

Mozilla in centos
by gopinath 13 Apr '08

13 Apr '08

how to deny changes to proxy setting in Mozilla firefox . Please help me out. Regards, Gopinath M Signal Networks Pvt. Ltd. Smile... it increases your face value!

2 1

Create Local CentOS 5.1 repo
by Joseph L. Casale 12 Apr '08

12 Apr '08

I am trying to create a local base repo from the DVD on a webserver as I am not able to install with the x64 DVD. I have done this before I recall by placing the DVD contents in the root of an empty webserver, but I have many existing repo's on this current server and so I wanted to maintain the existing hierarchy structure. I tried using the createrepo command and neither that nor copying the DVD into specified dir is working. Anyone know how to do this? Thanks! jlc

3 2

CentOS-announce Digest, Vol 38, Issue 5
by centos-announce-request＠centos.org 12 Apr '08

12 Apr '08

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2008:0214 Moderate CentOS 3 ia64 squid - security update (Pasi Pirhonen) 2. CESA-2008:0214 Moderate CentOS 4 ia64 squid - security update (Pasi Pirhonen) 3. CESA-2008:0214 Moderate CentOS 3 s390(x) squid - security update (Pasi Pirhonen) 4. CESA-2008:0214 Moderate CentOS 4 s390(x) squid - security update (Pasi Pirhonen) 5. CESA-2008:0209 Moderate CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) 6. CESA-2008:0209 Moderate CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Fri, 11 Apr 2008 19:55:31 +0300 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2008:0214 Moderate CentOS 3 ia64 squid - security update To: centos-announce(a)centos.org Message-ID: <20080411165531.GD30581(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2008:0214 https://rhn.redhat.com/errata/RHSA-2008-0214.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/squid-2.5.STABLE3-9.3E.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Wherefore is FUSE?
by Benjamin Smith 12 Apr '08

12 Apr '08

Tonight, I tried to roll out fuse on my CentOS 4 production system. (in order to use GlusterFS) I have two identical servers, and one took, the other didn't. How simple could this be? # yum install yum-plugin-priorities # yum install rpmforge-release # yum install fuse dkms-fuse both of these seem to work. Yet I run [root@kepler drivers]# modprobe fuse FATAL: Module fuse not found. I don't get it. both sides have the same: WORKS: [root@koehl etc]# rpm -qa | grep -i rpmforge rpmforge-release-0.3.6-1.el4.rf [root@koehl etc]# rpm -qa | grep -i fuse fuse-2.7.3-1.el4.rf dkms-fuse-2.7.2-1.nodist.rf [root@koehl etc]# modprobe fuse [root@koehl etc]# rpm -qa | grep -i pri yum-plugin-priorities-0.0.7-1.el4.centos [root@koehl etc]# ls /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko [root@koehl etc]# lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko [root@koehl drivers]# rpm -qf /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko file /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko is not owned by any package NOT WORKS: [root@kepler drivers]# rpm -qa | grep -i rpmforge rpmforge-release-0.3.6-1.el4.rf [root@kepler drivers]# rpm -qa | grep -i fuse dkms-fuse-2.7.2-1.nodist.rf fuse-2.7.3-1.el4.rf [root@kepler drivers]# modprobe fuse FATAL: Module fuse not found. [root@kepler /]# ls /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko ls: /lib/modules/2.6.9-67.0.7.ELsmp/kernel/drivers/fs/fuse/fuse.ko: No such file or directory Why one and not the other? And why isn't the fuse kernel "owned" by the rpm I used to install it? It's driving me NUTS. I've already tried copying over the "fs" directory and all child leaves. No effect. -Ben -- -- Only those who reach toward a goal are likely to achieve it. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

Command to get tape capacity status?
by Scott R. Ehrlich 12 Apr '08

12 Apr '08

I have an Overland tape library connected, via SCSI card, to an out-of-box, full install of C5 install on an old PC. I have a script that uses tar to archive data to tape and mtx to change tapes. What I don't know, if possible, is to obtain the status of how much tape is left in the drive. If I get a write failure, I'd like to know if the tape is bad or has run out of space. I know of bacula, amanda, and other backup methods, but I prefer to use the simplest options possible, mainly because if a hard drive failure occurs, which has happened at the last minute, I can take the original C5 media from CD, install it, and get back up and running in no time. So, any way to inquire remaining tape status and [estimated] capacity? Thanks. Scott

2 1

Strange reboots
by Linux 12 Apr '08

12 Apr '08

Hi, I have a CentOS 5.0 running as a web server. # uname -a Linux hostnamehidden.net 2.6.18-53.1.14.el5 #1 SMP Wed Mar 5 11:37:38 EST 2008 x86_64 x86_64 x86_64 GNU/Linux Every 59 minutes (maybe every hour) it reboots without any logs, without any traces and unfortunately with breaking software raid. After reboot dmesg does not have any strange entries. I double-checked crons, any strange services, nothing suspicious. I did "yum update" recently. I went to Datacenter and waited before the monitor but during reboot I did not see anything strange. I guess reboot is cold reboot. I changed all system and cpu fans. Upgraded system powersupply with a more powerful one. Placed server infront of air-conditioner. Do you have any idea? Thanks.

8 10

← Newer
1
...
15
16
17
18
19
20
21
...
28
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss April 2008