Discuss May 2008

discuss@lists.centos.org

268 participants
281 discussions

Re: [CentOS] ext3 filesystems larger than 8TB
by Brent L. Bates 05 May '08

05 May '08

I believe Florin Andrei had a typo in his message. No other file system will be as reliable as *XFS*. I've had XFS recover from system failures that Ext3 would/could not recover from. If you want dependability, reliability, and also large file systems, only use XFS. You'll find none better. You should also be using the 64 bit kernels as well, but then, you want that for a whole lot other reasons anyways. -- Brent L. Bates (UNIX Sys. Admin.) M.S. 912 Phone:(757) 865-1400, x204 NASA Langley Research Center FAX:(757) 865-8177 Hampton, Virginia 23681-0001 Email: B.L.BATES(a)larc.nasa.gov http://www.vigyan.com/~blbates/

3 2

kingston usb memory stick and file mode permissions
by James B. Byrne 05 May '08

05 May '08

I wish to change the ownership and access permissions of files and directories contained on this device. The device is immediately recognized and mounted when plugged in and I can create and move files on it. However, I cannot change either the permissions or the owner of any file or directory on this device, nor of the device mount itself, whether logged in as the owner or as root. Why is this so and is their any way to alter this behaviour. Sincerely, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 2

Re: [CentOS] ext3 filesystems larger than 8TB
by Eduardo Silvestre 05 May '08

05 May '08

But... Can i do that just with centos install cd and 3ware drivers? Format the volumes with 8TB/9TB/10TB without problems? Regards, --- Eduardo Silvestre nfsi telecom, lda. eduardo.silvestre(a)nfsi.pt Tel. (+351) 21 949 2300 - Fax (+351) 21 949 2301 http://www.nfsi.pt/ ----- Original Message ----- From: "Ray Van Dolson" <rayvd(a)bludgeon.org> To: centos(a)centos.org Sent: Sexta-feira, 2 de Maio de 2008 21H15m GMT +00:00 GMT Britain, Ireland, Portugal Subject: Re: [CentOS] ext3 filesystems larger than 8TB On Fri, May 02, 2008 at 04:09:48PM -0400, Ross S. W. Walker wrote: > > I think it *theoretically* should work as ext3 should to 16TB. > > However, we ran into issues with userland tools and such. Possibly > > related to x86_64 vs i386 stuff, but in the end to avoid continued > > troubleshooting we just used centosplus + jfs. Works > > perfectly for our > > 10TB filesystem. > > I'm curious what you store that you need 10TB of linear storage? > > I have had 4-6-8TB storage systems, but the storage was always > divvied up between different applications. > > -Ross > It's almost all Oracle database dump files... one database by itself is 4.5TB! Don't ask me what's in these things... :) Ray _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Slightly OT? - How do I set up Win98 to access a printer on my CentOS box?
by MHR 05 May '08

05 May '08

I have a WinXP guest under VMWare on my CentOS 5.1 host and it can access the CentOS printer(s) just fine. However, I also have a Win98 box on the LAN that I would like to be able to print on the CentOS printer. When I try to connect to the printer, Win98 tells me that it can't find the network...? Any suggestions? (This "slightly" really is - it _is_ directly related to CentOS, unlike my previous FC8 post....) Thanks. mhr

6 5

Re: Subject: [CentOS] "yum update" did not update kernel on one box
by Lanny Marcus 05 May '08

05 May '08

On 03 May 2008, Kai Schaetzl <maillists AT conactive.com> wrote: >Message: 9 >Date: Sat, 03 May 2008 16:31:50 +0200 >Message-ID: <VA.000031c9.0166573a(a)news.conactive.com> >Lanny Marcus wrote on Sat, 3 May 2008 07:28:10 -0500: > Linux compaq1300.HOMELAN 2.6.18-8.el5 >Ok. I just asked because you never mentioned you had actually checked. >Just a kernel missing when you update is not proof ;-) >I see that you have priority protections in place. Disable all your >extra repos, then disable the protections (basically go back to your >inital repo setup) and then do a check-update. You are using the >mirrorlist and not a specific CentOS mirror, do you? Kai: Thank you. I will do that, ASAP. Either *very* early some morning, before my wife is using her box, or when she's not home. I am not using a specific mirror. The other boxes also have priority working and yum gives the message about 259 (?) packages are protected and the Kernel updates on them were OK. However, as I am typing this, I suspect that I updated the Kernels on the other 2 boxes, by checking that they be updated in "PUP", with a couple of other packages, and not with the blanket "yum update" as I did in her box, with the command line. >BTW: I notice that your mail is missing any threading information, so >that it doesn't thread at all. I see that other people who use Gmail do >get the threading information, so there's probably some option not >activated in your Gmail account. Thank you for pointing that out. I do not believe that is a setting in Gmail. When I signed up for the list (3 years ago), I selected the Digest, because we had to go back to dial up, when we moved here. We have ADSL now, so I just changed that, to get individual emails from the list. That should begin Monday or Tuesday, and, hopefully, my messages will look better, when I reply. Also, during the past few days, with the DVD reader problem and this one, I have also done some reading of the ML Archives on the CentOS web site and copied messages there that I replied to, before I received them in the Digest the next morning. Hopefully, when I begin receiving individual messages, when I reply to them, the threading will not get screwed up, as it is now. Lanny

1 0

Problem mounting failed drive.
by Andrew ＠ ATM Logic 05 May '08

05 May '08

What is it that makes "text rescue" able to mount a drive, but I cannot mount it in a running system (or Knoppix/Ubuntu/CentOS Live CD etc) ? When booting with "text rescue" it mounts the old filesystem and I can see all my data (Not that I can do anything with it.... I cannot seem to figure out how to get it out of the system????) Anyhow I rebuilt a 2nd server, and tested and notice the same, even on a working systems I cannot mount the drives in another system....?? So, anyone able to help me either, mount the failed system (currantly sitting in the working system as hdc2) or mount it into anything else so I can copy some of the data off? This all started with a Grub error 25 that I could not seem to fix... Thanks for any tips.

3 3

Re: [CentOS-promo] Linuxtag 2008 - call for meeting
by Dag Wieers 04 May '08

04 May '08

On Tue, 29 Apr 2008, Ralph Angenendt wrote: > Linuxtag 2008 in Berlin is coming closer by the minute (May 28th to May > 31st 2008) - and we are going to be there. And so can you - either as > a visitor or with us at the booth we have there! See > <http://www.linuxtag.org/> for more information about the event. > > To coordinate this event, there is going to be a "Meeting" in the IRC > channel #centos-social on the freenode IRC network > (<http://freenode.net/using_the_network.shtml> for more information). > The meeting will take place on Sunday, March 4th 2008 at 22:00 CEST > (that's 20:00 UTC). Just connect to irc.freenode.net with an IRC client > and /join #centos-social then. > > So if you want to be part of Linuxtag 2008: Be there on sunday! Or at > least drop us a mail. As this mail goes to centos-de(a)centos.org *and* > centos-promo(a)centos.org, please make sure that you only answer to both > lists when you are subscribed to both lists. > > Cheers, Danke, Thank you in advance, Grüße, This meeting is in an hour on #centos-social. If you like to come and join the CentOS team at LinuxTag, join #centos-social on freenode in an hour. -- -- dag wieers, dag(a)centos.org, http://dag.wieers.com/ -- [Any errors in spelling, tact or fact are transmission errors]

1 0

CentOS as VPN Gateway?
by Morten Nilsen 04 May '08

04 May '08

Hello, I am currently setting up my new router, and I opted for using CentOS.. Now, I need OpenVPN support, and I'd rather not install it from source. I tried yum, but there doesn't appear to be any packages for it available.. Any tips? -- Cheers, Morten :wq

5 7

XFS at install time
by Morten Nilsen 03 May '08

03 May '08

Why won't the installer let me choose XFS for my partitions? -- Cheers, Morten :wq

4 5

USB Wireless NIC
by Joseph L. Casale 03 May '08

03 May '08

Can anyone vouch for a usb wifi nic that works under CentOS 5.1 reliably with good reception? Thanks! jlc

3 4

← Newer
1
...
22
23
24
25
26
27
28
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss May 2008