Discuss November 2009

discuss@lists.centos.org

311 participants
290 discussions

Re: [CentOS] Curious behaviour of openvpn
by Ben Damon 09 Nov '09

09 Nov '09

>>On Fri, 2009-11-06 at 09:22 -0500, Ben Damon wrote: >> This happened to me after updating to 5.4 as well. Except mine have >> not come back. My OpenVPN configuration has been used for a couple >> years. >> >> This is what I am seeing in the log. >> >> TLS Error: TLS key negotiation failed to occur within 60 seconds >> (check your network connectivity) >> TLS Error: TLS handshake failed >> >May seem like a dumb question but... >Are the ports that your server is using open in iptables? >Is your config file still the same as it was pre-upgrade? Nothing in iptables. Same config I have used for a long time. I regenerated my keys and all is well.

1 0

How Can I change CentOS CLI Screen Resolution to smaller text (without GUI)?
by Sam Acosta 09 Nov '09

09 Nov '09

Hi, I'd like to view the Screen resolution in smaller text on my server terminal. The server is not installed with any GUI so it's in plain text mode. Thanks. Sam --------------------------------- NOTE: The information contained in this document and its attachments, if any, may be confidential and/or proprietary and is intended for the use of the individual or entity to whom it was originally addressed and who has been specifically authorized to receive it. Unless otherwise specifically stated, this document and its attachments, if any, contain opinions and views only of the sender and do not constitute a formal disclosure nor commitment of the sender nor of any other entity. --------------------------------- Sent from Singapore

8 10

kernel: target...SCSI
by m.roth＠5-cent.us 09 Nov '09

09 Nov '09

Folks, I've now got two systems that have been upgraded to 5.4, and that are sending out log entries like target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62) with the only differences being the target. I see no errors per se in the logs. Googling shows posts with different offsets, and actual errors in the logs. Does anyone have any ideas why these systems are sending this out, and how I turn them *off*, if they're not errors? mark

1 0

Cluster server options?
by Scott Ehrlich 09 Nov '09

09 Nov '09

I have a 10 blade cluster of just hardware - I can install what I want, how I want. What options are there if I wanted to build the 10 blades as one large beast, but _NOT_ necessarily for someone doing grid-type work? Some users don't now how to program that way, but they'd like to have their program run on something that acts like a single processor, but a massive single processor with lots of memory. Some code is designed for a single, powerful workstation. I'd like this cluster to act as one powerful workstation. Thanks for insights. Scott

7 9

EL4 EPEL mirrors missing headers
by Ron Yorston 09 Nov '09

09 Nov '09

The EPEL mirrors for EL4 no longer have a headers directory, just repodata. This means that up2date has stopped working. Is this a problem with EPEL or with my system? Ron

1 0

GUID Partition Tables and Ext3 Partition Size
by Manish Kathuria 09 Nov '09

09 Nov '09

Hello, Does CentOS 5.4 support large ( > 2 TB) external storage devices using GPT (GUID Partition Tables), while the main OS resides on smaller hard disks using MBR. In this scenario, what can be the largest possible size of an ext3 partition (and filesystem) which can be created on the storage array under CentOS 5.4 ? Thanks, Manish

3 4

connection refused resolving - after 5.4 upgrade
by Rob Kampen 09 Nov '09

09 Nov '09

Hi all, prior to 5.4 upgrade, my two DNS servers would only get 'connection refused resolving .....' on rare infrequent occasions (once or twice a month) after upgrade to 5.4 I get 500+ per day. Google has suggestions for |logging category lame-servers null; ; ; |however this strikes me as severe overkill as it will mask genuine problems. Anyone else noticed this? Suggestions as to why or what is causing? Thanks Rob

2 2

Net-SNMP interfaces out of order
by Bob Puff＠NLE 08 Nov '09

08 Nov '09

Hello Centos People, I have a CentOS 5.3 box that had a total of 5 ethernet cards in it. It functions to share an internet connection with 4 different subnets. All works fine, except I'm noticing that my MRTG traffic graphs are wrong. Further digging with snmpwalk reveal that the order of the ethernet interfaces changes every time the machine is rebooted to a different order. For example, I currently see: IF-MIB::ifDescr.1 = STRING: lo IF-MIB::ifDescr.2 = STRING: eth3 IF-MIB::ifDescr.3 = STRING: eth4 IF-MIB::ifDescr.4 = STRING: eth0 IF-MIB::ifDescr.5 = STRING: eth1 IF-MIB::ifDescr.6 = STRING: eth2 IF-MIB::ifDescr.7 = STRING: sit0 Why is this not in proper order? Other servers seem to be ok. my snmpd.conf file has little, if anything as far as config. Is there something I need to put in there for persistence? Bob

2 1

Centos HP Pavilion box
by Mike -- EMAIL IGNORED 08 Nov '09

08 Nov '09

Has anyone put Centos 5.4 (or ant version on aHP Pavilion box? I'm having some problems. For example, I can't get my Dell E198WFPV 1440x900 monitor to work correctly. Thanks, Mike.

2 3

NTFS read and write support in CentOS 5.4 centosplus kernel?
by Xin Yang 08 Nov '09

08 Nov '09

Hi everybody, I am a CentOS newbie, and I want to know whether the recent centosplus kernel supports read and write ntfs file systems or not. Regards Xin

2 1

← Newer
1
...
18
19
20
21
22
23
24
...
29
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2009