February 2009 - Discuss - lists.centos.org

Re: [CentOS] kickstart won't kick-off via network
by Isaac Hailperin 04 Feb '09

04 Feb '09

> >Now since I get asked all these questions at boot time, I suspect that > >the kickstart file is not there to answer these questions. > > It does use it, it just doesn't find the network-block in ks.cfg. Does your > ks.cfg contain some lines for the networking? Yes: # Kickstart file automatically generated by anaconda. install url --url http://9.0.0.1/all/repository/CentOS5.2 [...] network --device eth0 --bootproto dhcp --hostname node1.cluster network --device eth1 --bootproto dhcp --hostname node1.cluster [...] > You didn't modify the ks.cfg you > mention above, did you? Yes, I modified the part after install. It used to be "cdrom". > You can open the ks.cfg you already have and then tweak with the wizard. I opened the ks.cfg with system-config-kickstart. I configured it to install from network. It produced the following: #platform=x86, AMD64, or Intel EM64T # System authorization information auth --useshadow --enablemd5 # System bootloader configuration bootloader --append="rhgb quiet" --location=mbr --driveorder=sda # Partition clearing information clearpart --linux --drives=sda # Use graphical install graphical # Firewall configuration firewall --disabled # Run the Setup Agent on first boot firstboot --disable # System keyboard keyboard us # System language lang en_US # Installation logging level logging --level=info # Use network installation url --url=http://9.0.0.1/all/repository/CentOS5.2 # Network information network --bootproto=dhcp --device=eth0 --onboot=on network --bootproto=dhcp --device=eth1 --onboot=on #Root password rootpw --iscrypted $xxx # SELinux configuration selinux --disabled # System timezone timezone --isUtc America/New_York # Install OS instead of upgrade install # X Window System configuration information xconfig --defaultdesktop=GNOME --depth=8 --resolution=640x480 --startxonboot # Disk partitioning information part / --bytes-per-inode=4096 --fstype="ext3" --size=25000 part swap --bytes-per-inode=4096 --size=8000 part /home --bytes-per-inode=4096 --fstype="ext3" --grow --size=100 %packages @base-x Now in conjunction with the kernel parameter ksdevice=eth1 (thank you Kai!) this works like a charm. I seems that I misunderstood the use of "install" and "url". - Comming form SLES and autoyast I thought I should avoid the gui, but kickstart seems to do better here - Thank you! Isaac _____________________________________________________________________ Vorstand: Ertu Uysal, Axel Queck Vorsitzender des Aufsichtsrats: Bernhard Bruscha Sitz der Gesellschaft: Tuebingen Amtsgericht Stuttgart HRB 381299 Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

2 1

RHEL -> CentOS
by John R Pierce 04 Feb '09

04 Feb '09

I have a system that was originally installed with RHEL 3 x86_64, and I've since 'updated' it to CentOS 3 via installing yum and centos-release, then running a yum update. is there any way I can force -all- installed packages to be replaced with their centos analogs just to be sure its all consistent?

5 5

/etc/X11/xorg.conf question
by Lanny Marcus 03 Feb '09

03 Feb '09

If I use "system-config-display" or "system-config-display --reconfig" although I get a message that I need to log out of GNOME, to have the new file written, for new Display Resolution, logging out or restarting the box does not result in the new settings for the Display taking hold. Sometimes, the number of colors is updated, but *never* the Resolution. Below is my xorg.conf file. What do I need to include in xorg.conf for the resolution to be 1280 x 1024 instead of the current 1600 x 1200? Display is a Dell M991 and the Video Card is shown as Nvidia NV11 (GeForce2 MX/MX400). CentOS 5.2 (32 bit) fully updated. TIA! # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Device" Identifier "Videocard0" Driver "nv" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1600x1200" "1600x1024" "1440x900" "1400x1050" "1280x1024" "1280x1024" "1280x960" "1280x960" "1280x800" "1280x800" "1152x864" "1152x864" "1152x768" "1152x768" "1024x768" "1024x768" "800x600" "800x600" "640x480" "640x480" EndSubSection EndSection

5 6

Re: [CentOS] Internet problem
by fabian dacunha 03 Feb '09

03 Feb '09

Dear All, I have a Centos 5.2 server used as a squid proxy server for quite sometime and was workin fine after a power failure the system refused to boot i jus see the grub boot load screen n then hangs so using the space bar n with the arrow keys i selected my earlier kernel and it booted fine i think that the latest kernel file i have that isvmlinuz-2.6.18-92.1.17.el5xen is corrupted. how could i restore it back will yum upgrade solve the problem appreciate ur help regards fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

Port Forwarding
by Thom Paine 03 Feb '09

03 Feb '09

I'm having trouble getting port forwarding working on my one box. I have 2 incoming internet connections. I have 2 servers on these connections. pubinternet privinternet eth0:x.x.x.x eth0:y.y.y.y eth1:10.10.10.1 eth1:10.10.10.4 I need to be able to port forward traffic from y.y.y.y to the box on 10.10.10.1. I have my firewall configured (I use gshield) but 10.10.10.1 does not seem to answer when I try and test. I use gshield all the time for other servers with only 1 connection, and it works awesome. I can't seem to get it to forward traffic from y.y.y.y to 10.10.10.1. 10.10.10.1 and 10.10.10.4 are connected together with a switch, and I am able to telnet to 10.10.10.1 from 10.10.10.4 on port 25. Is there some step with networking that I am missing in getting this to work? Thanks. -- -=/>Thom

6 16

Intel DG33BU motherboard
by Paolo Supino 03 Feb '09

03 Feb '09

Hi I've installed CentOS 5.2 (i386) in a computer with a DG33BU motherboard ... When I installed it it crashed because of ACPI issues. Searching Google I found that I need to turn ACPI off in order to successfully install CentOS, which I did. After a while I noticed that because of ACPI is off the Linux kernel finds, initializes and uses only 1 CPU core in the Q6600 quad core CPU that is installed in this computer :-( How can I force it to find, initialize and use all the 4 cores in the computer even if ACPI is off? -- TIA Paolo

8 20

System rescue help - UPS
by Rajagopal Swaminathan 03 Feb '09

03 Feb '09

Greetings, I am quite surprised that ericsson was not even mentioned in the UPS thread Rajagopal Disclosure: I am not an employee or anyway related to Ericsson except for asking them for couple of quotations (in India -- yeah _we_ need UPS the most..... NExt to diesel power gnerators fondly refered to as "DG" -- not to be confused with "Data General").

1 0

CentOS-announce Digest, Vol 48, Issue 1
by centos-announce-request＠centos.org 03 Feb '09

03 Feb '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0019-01: Important CentOS 2 i386 hanterm-xf security update (John Newbigin) 2. CESA-2009:0005-01: Moderate CentOS 2 i386 gnome-vfs security update (John Newbigin) 3. CESA-2009:0004-01: Important CentOS 2 i386 openssl security update (John Newbigin) 4. CESA-2009:0020-01: Moderate CentOS 2 i386 bind security update (John Newbigin) 5. CESA-2009:0001-01: Important CentOS 2 i386 kernel security update (John Newbigin) 6. GFS Update for CentOS 3 kernel 2.4.21-58.EL (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 03 Feb 2009 10:25:09 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0019-01: Important CentOS 2 i386 hanterm-xf security update To: centos-announce(a)centos.org Message-ID: <498780D5.7060607(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0019-01 Important: hanterm-xf security update Files available: hanterm-xf-2.0.5-5.AS21.2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Tue, 03 Feb 2009 10:27:51 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0005-01: Moderate CentOS 2 i386 gnome-vfs security update To: centos-announce(a)centos.org Message-ID: <49878177.6060201(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0005-01 Moderate: gnome-vfs security update Files available: gnome-vfs-1.0.1-18.2.i386.rpm gnome-vfs-devel-1.0.1-18.2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 3 Date: Tue, 03 Feb 2009 10:30:18 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0004-01: Important CentOS 2 i386 openssl security update To: centos-announce(a)centos.org Message-ID: <4987820A.5060306(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0004-01 Important: openssl security update Files available: openssl-0.9.6b-49.i386.rpm openssl-0.9.6b-49.i686.rpm openssl-devel-0.9.6b-49.i386.rpm openssl-perl-0.9.6b-49.i386.rpm openssl095a-0.9.5a-34.i386.rpm openssl096-0.9.6-34.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 4 Date: Tue, 03 Feb 2009 10:32:53 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0020-01: Moderate CentOS 2 i386 bind security update To: centos-announce(a)centos.org Message-ID: <498782A5.7040507(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0020-01 Moderate: bind security update Files available: bind-9.2.1-11.el2.i386.rpm bind-devel-9.2.1-11.el2.i386.rpm bind-utils-9.2.1-11.el2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 5 Date: Tue, 03 Feb 2009 10:36:06 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0001-01: Important CentOS 2 i386 kernel security update To: centos-announce(a)centos.org Message-ID: <49878366.1030304(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0001-01 Important: kernel security update Files available: kernel-2.4.9-e.74.athlon.rpm kernel-2.4.9-e.74.i686.rpm kernel-BOOT-2.4.9-e.74.i386.rpm kernel-debug-2.4.9-e.74.i686.rpm kernel-doc-2.4.9-e.74.i386.rpm kernel-enterprise-2.4.9-e.74.i686.rpm kernel-headers-2.4.9-e.74.i386.rpm kernel-smp-2.4.9-e.74.athlon.rpm kernel-smp-2.4.9-e.74.i686.rpm kernel-source-2.4.9-e.74.i386.rpm kernel-summit-2.4.9-e.74.i686.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 6 Date: Tue, 3 Feb 2009 15:39:57 +0100 From: Tru Huynh <tru(a)pasteur.fr> Subject: [CentOS-announce] GFS Update for CentOS 3 kernel 2.4.21-58.EL To: centos-announce(a)centos.org Message-ID: <20090203143957.GA24870(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset=us-ascii The files have been signed and uploaded :) Thanks John, Tru ----- Forwarded message from John Newbigin <jnewbigin(a)ict.swin.edu.au> ----- Date: Tue, 03 Feb 2009 10:03:21 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: GFS Update for CentOS 3 kernel 2.4.21-58.EL New GFS packages for the 2.4.21-58.EL kernel are ready. http://rhn.redhat.com/errata/RHBA-2008-1006.html http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-6.0.2.36-9.i386.rpm http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-devel-6.0.2.36-9.i386… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-6.0.2.36-9.i3… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-6.0.2.36-9.i686.rpm http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-devel-6.0.2.36-9.i686… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-6.0.2.36-9.i6… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-hugemem-6.0.2… http://www.ict.swin.edu.au/personal/jnewbigin/GFS/GFS-modules-smp-6.0.2.36-… These packages are signed with my jnewbigin-csgfs(a)ict.swin.edu.au key. They need to be resigned with the CentOS-3 key and published to the csgfs repo. Thanks John. -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ----- End forwarded message ----- -- Dr Tru Huynh | http://www.pasteur.fr/recherche/unites/Binfs/ mailto:tru@pasteur.fr | tel/fax +33 1 45 68 87 37/19 Institut Pasteur, 25-28 rue du Docteur Roux, 75724 Paris CEDEX 15 France ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 48, Issue 1 **********************************************

1 0

squid timeout error
by Gopinath Achari 03 Feb '09

03 Feb '09

Dear All, i am using squid-2.5STABLE Below error message occurs if the site is accessed through proxy server. same problem occurs for many other sites likes dkc1.digikey.com But the same site opens clearly without any problem if accessed directly. Please help Thanks in advance. ERROR The requested URL could not be retrieved While trying to retrieve the URL: http://www.wisegeek.com/ The following error was encountered: * Connection to 174.132.22.20 Failed The system returned: (110) Connection timed out The remote host or network may be down. Please try the request again. Your cache administrator is root. Generated Sat, 31 Jan 2009 13:15:14 GMT by proxyserver (squid/2.5.STABLE14) when checked in access.log TCP/MISS 504 www.wisegeek.com error messages in the squid logs file Regards, Gopinath M.

3 2

Automounter issue
by David.Mackintosh＠xdroop.com 03 Feb '09

03 Feb '09

Anyone seen this before? I have a number of file systems nfs mounted onto clients running various versions of CentOS (and Upstream), although mostly they are v5.x flavors. =20 The server is a Network Appliance filer. When the build process for this team runs, it sometimes dies because it can't find files in the automounter tree; if the engineer checks, he sometimes sees a problem, and sometimes doesn't; for example: [pdbuild@build-c5u1: ~] ll /tools/vault/kernels ls: /tools/vault/kernels: No such file or directory [pdbuild@build-c5u1: ~] ll /tools/vault/kernels total 152K drwxr-xr-x 4 pdbuild everyone 4.0K Aug 7 2007 2.4.21-40.EL.CUSTOM.01smp/ drwxr-xr-x 7 pdbuild everyone 4.0K Jun 26 2007 2.6.16.33-1-xen/ drwxr-xr-x 7 pdbuild everyone 4.0K Aug 7 2007 2.6.16.33-xen/ drwxr-xr-x 4 pdbuild everyone 4.0K Jan 3 2008 2.6.18-53.1.4.el5/ drwxr-xr-x 4 pdbuild everyone 4.0K Feb 11 2008 2.6.18-53.1.6.el5/ drwxr-xr-x 4 pdbuild everyone 4.0K Nov 15 2007 2.6.18-53.el5/ drwxr-xr-x 4 pdbuild everyone 4.0K Sep 24 2007 2.6.18-8.el5/ drwxr-xr-x 7 pdbuild everyone 4.0K Oct 16 2007 2.6.18-xen/ [pdbuild@build-c5u1: ~] df /tools/vault/kernels Filesystem Size Used Avail Use% Mounted on nas02:/vol/tools/vault 779G 655G 124G 85% /tools/vault Now I've seen this before where some processes don't wait for the automount= er to do its thing before continuing; they just report "fail" and move on to the failure handling. I'm guessing that I need some magic on the automounter configuration to change this behavior, can anyone point me in the right direction? Thanks for your time. -- /\oo/\ / /()\ \ David Mackintosh | dave(a)xdroop.com | http://www.xdroop.com

5 8

Update glibc-common does not work
by Timothy Kesten 03 Feb '09

03 Feb '09

Hi Folks, using XCentOS 5. Try an update (i.e. glibc) Get some error messages 0:14:14 : Failure getting http://centosb2.centos.org/centos/5.2/updates/i386/RPMS/glibc-common-2.5-24…: 20:14:14 : --> [Errno 4] Socket Error: timed out 20:14:14 : Trying other mirror. 20:16:37 : Failure getting http://centosk.centos.org/centos/5.2/updates/i386/RPMS/glibc-common-2.5-24.…: 20:16:37 : --> [Errno -1] Package does not match intended download 20:16:37 : Trying other mirror. 20:16:37 : Failure getting http://centosq.centos.org/centos/5.2/updates/i386/RPMS/glibc-common-2.5-24.…: 20:16:37 : --> [Errno 9] Requested Range Not Satisfiable or Fehler beim Herunterladen der Pakete: glibc-common - 2.5-24.el5_2.2.i386: failure: RPMS/glibc-common-2.5-24.el5_2.2.i386.rpm from updates: [Errno 256] No more mirrors to try. What happens here? Thx Timothy

2 4

unsubscribe
by Nyarai Tunjera 03 Feb '09

03 Feb '09

Nyarai Tunjera ICT Director Gateway Primary School Box EH 121 Emeraldhill Zimbabwe www.gatewayprimary.co.zw Forever God is Faithful Be exalted oh GOD above the heavens Let your Glory fill ALL the earth. Great is OUR God -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

13 24

Re: [CentOS] Emergency rescue help needed
by John R Pierce 03 Feb '09

03 Feb '09

Sorin Srbu wrote: > I've been buying from the Smart-UPS and Back-UPS range. Those should be ok, > shouldn't they? SmartUPS, OK. BackUPS, cheap consumer junk. I've had to toss out dozens of various BackUPS units, mostly in the 450-600VA range... They act like they have a dead/weak battery, so I replace the battery with a brand new one, and the unit is dead. They are typically 2-3 years old at this point, so hardly worth bothering with.

2 1

Re: [CentOS] Emergency rescue help needed
by John R Pierce 03 Feb '09

03 Feb '09

Sorin Srbu wrote: > Oh, didn't know about Best Power. Is that something like Eatons budget-line > brand or something? > Best Power made the excellent midsized FerrUPS units 10+ years ago. washing machine sized 7kva kinda stuff. built like a tank, very serviceable. Eaton also acquired Sola, and AFAIK, PowerWare was built from a merge of Best Power and Sola.

2 1

Re: [CentOS] Emergency rescue help needed
by Les Mikesell 03 Feb '09

03 Feb '09

Sorin Srbu wrote: >> >>> Marking words: "used" to be best? Which is the best now then? APC is >>> apparantely not an option as they suck bigtime IMO, so what's? Powerware and >>> APC are the two biggest and most wellknown UPS-manufacturers I know of. >> APC does make a full line of units. Perhaps you aren't buying the right >> ones if they aren't serving you well. > > I've been buying from the Smart-UPS and Back-UPS range. Those should be ok, > shouldn't they? That depends on how important it is to never fail. If it is extremely important, you might want something with redundant components like the Symmetra line. These are designed to keep working with some failed components and to allow you to replace parts with the equipment on bypass but still running. > All in all about a handfull of them. They're quite pricey... 90% > of them suffered some kind of a circuit board failure. Not what you'd usually > expect from a UPS, rather you'd expect the battery to give up first. I bought > them over a few years, so it shouldn't be a bad batch or something like that. You might blame one or two on bad components, but this sounds like something is wrong with the input power at your location. I assume they are lasting at least through the 2 year warranty period. We have at least a few dozen of them and haven't noticed any pattern of problems other than aging batteries. Are you tracking the in/out power levels on the smart units to see what they have to deal with? -- Les Mikesell lesmikesell(a)gmail.com

4 3

java 1.3.1 for CentOS
by Indunil Jayasooriya 03 Feb '09

03 Feb '09

Hi List, I am looking for java java 1.3.1 RPM for CentOS 4.5. I googled. I found below URL for it. http://rpm.pbone.net/index.php3/stat/4/idpl/5773889/com/IBMJava2-JRE-1.3.1-… R u okay with it. Your ideas Pls? -- Thank you Indunil Jayasooriya

3 2

Linux HA or Heartbeat IP address question
by Devraj Mukherjee 03 Feb '09

03 Feb '09

Hi all, I am following the guide on HowToForge to get Heartbeat going for two Apache web servers (http://www.howtoforge.com/high_availability_heartbeat_centos) a quick question for anyone who might have a similar setup. Do I have to assign the service IP to either of the NICs or does Heartbeat do that automagically? Thanks -- "The secret impresses no-one, the trick you use it for is everything" - Alfred Borden (The Prestiege)

2 1

Redistributing CentOS
by James Bensley 02 Feb '09

02 Feb '09

Hey Listees, Just a quick question. I hope this isn't received incorrectly by everyone as I do mean the best for the CentOS project; I am wondering if it would be frowned upon to upload CentOS to my RapidShare account. I understand I can freely distribute CentOS but to what extent? In its simplest form I only really want to upload CentOS 5.2 to my RapidShare account for speed. I had to download it twice this weekend at two difference remote sites and sometimes the mirror was a bit slow. Generally they are quite fast but I mean with RapidShare I can get 50Mbps compared to normal 6-10Mbps from some mirrors. I understand it depends on the line I am downloading from and the load on the mirror etc but because fools like myself and many others have paid RapidShare accounts we can download things super quick with a vary reliable supplier. I am wondering why I can't find CentOS on there already as that was the first place I looked hoping I could download the DVD install straight from there in 20 minutes? Is it because this is either frowned upon or just straight up wrong? Does anyone have any suggestions about the right way to go with this? Thanks for reading people. Regards, James ;) -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT/MU/U dpu s: a--> C++>$ U+> L++> B-> P+> E?> W+++>$ N K W++ O M++>$ V- PS+++ PE++ Y+ PGP t 5 X+ R- tv+ b+> DI D+++ G+ e(+++++) h--(++) r++ z++ ------END GEEK CODE BLOCK------

3 2

OT: procmail recipe question
by James Pifer 02 Feb '09

02 Feb '09

I'm trying to use procmail and I'm having trouble getting it to set some headers. I have one mailing list that sets Newsgroups: in the header and I want to remove it. I have the following test recipe: :0 * ^Subject:.*\<testing * ^(Mime-Version:|Content-) | formail -IMime-Version: -IContent- If I understand it correctly, it should remove the Mime-Verion and Content headers. The recipe gets matched but then doesn't deliver correctly: procmail: Match on "^Subject:.*\<testing" procmail: Match on "^(Mime-Version:|Content-)" procmail: Executing "formail,-IMime-Version:,-IContent-" procmail: Assigning "LASTFOLDER=formail -IMime-Version: -IContent-" procmail: Notified comsat: "test@:/home/jep/formail -IMime-Version: -IContent-" >From jep(a)obrien-pifer.com Mon Feb 2 11:43:03 2009 Subject: testing Folder: formail -IMime-Version: -IContent- 1010 It looks like it's trying to put it in a folder starting with formail. I tried putting the mail file on the next line (/var/mail/test), which is the same way I do it on my kid's procmailrc's, but it seems to ignore it. Where does procmail get the LASTFOLDER thing from? Anyone know what I'm doing wrong? Thanks, James

2 2

boot problem with centos
by fabian dacunha 02 Feb '09

02 Feb '09

Dear All, I have a Centos 5.2 server used as a squid proxy server for quite sometime and was workin fine after a power failure the system refused to boot i jus see the grub boot load screen n then hangs so using the space bar n with the arrow keys i selected my earlier kernel and it booted fine i think that the latest kernel file i have that isvmlinuz-2.6.18-92.1.17.el5xen is corrupted. how could i restore it back will yum upgrade solve the problem appreciate ur help regards fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

Re: [CentOS] Emergency rescue help needed
by Les Mikesell 02 Feb '09

02 Feb '09

Sorin Srbu wrote: > > Marking words: "used" to be best? Which is the best now then? APC is > apparantely not an option as they suck bigtime IMO, so what's? Powerware and > APC are the two biggest and most wellknown UPS-manufacturers I know of. APC does make a full line of units. Perhaps you aren't buying the right ones if they aren't serving you well. -- Les Mikesell lesmikesell(a)gmail.com

2 1

Re: [CentOS] Emergency rescue help needed
by Toby Bluhm 02 Feb '09

02 Feb '09

Sorin Srbu wrote: >> -----Original Message----- >> From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf > Of >> John R Pierce >> Sent: Friday, January 30, 2009 6:49 PM >> To: CentOS mailing list >> Subject: Re: [CentOS] Emergency rescue help needed >> >> Eaton Powerware used to be Best, they made the very good FerrUps series. > > Marking words: "used" to be best? Which is the best now then? I think he meant the brand name "Best Power." Eaton owns both the Best Power and Powerware brands. -- tkb

2 1

Re: [CentOS] Emergency rescue help needed
by Anne Wilson 02 Feb '09

02 Feb '09

On Friday 30 January 2009 11:02:50 Sorin Srbu wrote: > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > > Behalf > > Of > > >Anne Wilson > >Sent: Friday, January 30, 2009 11:20 AM > >To: CentOS mailing list > >Subject: Re: [CentOS] Emergency rescue help needed > > > >> However, in some cases it's cheaper to just get a whole new UPS... 8-/ > > > >I know I was shocked at the price I had to pay last time I replaced the > > APC battery. My favourite vendor sells a lot of Liebert PowerSure UPSs, > > so I presume they have had no problems with them, or they'd have given up > > by now. There is a large range, and the prices are good, but the only > > thing I can say is that I haven't heard anyone complain. I'd prefer to > > hear a positive > > report > > >before buying. > > Did you check Eaton Powerware? They are very competitively priced IMO. We > bought APC's before as well, but I felt the controller software was not as > smooth as it could've been and the battery replacement-programs very not > that good as Powerware's variants. > > With UPS's I prefer a brand-name. If nothing else for the reason that they > stock batteries even to older models. Never heard of them, but I'll take this as a recommendation, thanks. Anne

3 2

Internet problem
by kmadananteshwar.vbhat＠gmail.com 01 Feb '09

01 Feb '09

Hey folks ! I am facing the following problems with internet on my acer aspire 2920 laptop running centos 5.2 ; whenever I launch mozilla firefox 3 beta 5 it takes at least one and a half hours just to load the homepage http://www.google.com/ig which in my windows partition takes just under 1 second and also my internet connection is a speedy 256 kbps / up to 2 mbps on BSNL in india .... Does any one have any suggestions and / or solutions ? Yours, KMB Sent from BlackBerry® on Airtel

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss February 2009