Discuss April 2009

discuss@lists.centos.org

291 participants
340 discussions

Re: [CentOS] Upgrade
by David G. Miller 02 Apr '09

02 Apr '09

"Thomas Dukes" <tdukes(a)sc.rr.com> wrote: > >> > -----Original Message----- >> > From: centos-bounces(a)centos.org >> > [mailto:centos-bounces@centos.org] On Behalf Of Ned Slider >> > Sent: Tuesday, March 31, 2009 10:34 PM >> > To: CentOS mailing list >> > Subject: Re: [CentOS] Upgrade >> > >> > Thomas Dukes wrote: >> >>> > > Hello, >>> > > >>> > > Just did yum update. There were numerous packages to be >>> >> > updated. I >> >>> > > get this is the newest release of Centos. >>> > > >>> > > The update bombed stating I need nss-3.12.2.0-2.el5. I did >>> >> > a rpm -q >> >>> > > nss and >>> > > nss-3.12.2.0-4.el5 is install in Cento 5.2. >>> > > >>> > > What's up with that? >>> > > >>> > > TIA >>> > > >>> >> > >> > You didn't wait for the official release announcement ;) >> > > Good one!! :-) > > Wasn't trying to upgrade to the newest release. I run a 'yum update' daily. > I only have Centos repos installed so I don't know how I have a version of > nss newer in 5.2 than 5.3. > > As someone suggested in a later reply, I'll wait a day or two and try again. > > Thanks > Lots of noise on the list today. I ran into the same problem when I attempted to "yum update" my workstation last night. I worked around it using the old old "rpm dependency hell" technique of retrying the update but sequentially excluding each dependency as the various update attempts revealed them to me. I finally got a working update with: yum --exclude wxGTK --exclude nss-devel --exclude 'rpm-*' --exclude popt update; date wxGTK is excluded since I'm also running audacity 1.3.0b. The remaining excludes got me around the nss-devel problem. Got up this morning and re-ran my yum update with only wxGTK excluded and it worked just fine. Literally as I was typing this e-mail, the update for my laptop did the same thing (complaint about a missing nss-devel). My other systems all required changing /etc/yum.repos.d/Centos-Base.repo to use "baseurl" instead of "mirrorlist" before the update would even run. I made the same change on the laptop and the update is now progressing as expected. The laptop and my workstation are the only x86_64 installations. The remaining systems are all 32 bit. Since the problem still occurred on my laptop but went away when I switched to "baseurl", I wonder if one of the mirrors has a bad configuration. The results of this morning's update on my workstation are as follows: [root@bend video]# yum --exclude wxGTK update; date Loaded plugins: fastestmirror, priorities, protectbase Loading mirror speeds from cached hostfile * rpmforge: rh-mirror.linux.iastate.edu * extras: ftp.lug.udel.edu * updates: ftp.linux.ncsu.edu * base: centos-distro.cavecreek.net * addons: centos.mirror.nac.net kbs-CentOS-Extras | 951 B 00:00 rpmforge | 1.1 kB 00:00 extras | 951 B 00:00 updates | 951 B 00:00 primary.xml.gz | 50 kB 00:00 updates 106/106 base | 1.1 kB 00:00 addons | 951 B 00:00 adobe-linux-i386 | 951 B 00:00 Excluding Packages in global exclude list Finished 331 packages excluded due to repository protections Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package avahi-compat-libdns_sd.x86_64 0:0.6.16-1.el5_2.1 set to be updated ---> Package rpm-devel.x86_64 0:4.4.2.3-9.el5 set to be updated --> Processing Dependency: nss-devel for package: rpm-devel ---> Package rpm-libs.x86_64 0:4.4.2.3-9.el5 set to be updated ---> Package kernel.x86_64 0:2.6.18-128.1.1.el5 set to be installed ---> Package kernel-devel.x86_64 0:2.6.18-128.1.1.el5 set to be installed ---> Package kernel-headers.x86_64 0:2.6.18-128.1.1.el5 set to be updated ---> Package rpm-devel.i386 0:4.4.2.3-9.el5 set to be updated ---> Package rpm-libs.i386 0:4.4.2.3-9.el5 set to be updated ---> Package rpm.x86_64 0:4.4.2.3-9.el5 set to be updated ---> Package gdm.x86_64 1:2.16.0-47.el5.centos set to be updated ---> Package rpm-build.x86_64 0:4.4.2.3-9.el5 set to be updated ---> Package popt.i386 0:1.10.2.3-9.el5 set to be updated ---> Package rpm-python.x86_64 0:4.4.2.3-9.el5 set to be updated ---> Package popt.x86_64 0:1.10.2.3-9.el5 set to be updated --> Running transaction check ---> Package nss-devel.x86_64 0:3.12.2.0-4.el5.centos set to be updated --> Processing Dependency: nspr-devel >= 4.6.99 for package: nss-devel --> Running transaction check ---> Package nspr-devel.x86_64 0:4.7.3-2.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: kernel x86_64 2.6.18-128.1.1.el5 updates 17 M kernel-devel x86_64 2.6.18-128.1.1.el5 updates 5.1 M Updating: avahi-compat-libdns_sd x86_64 0.6.16-1.el5_2.1 updates 23 k gdm x86_64 1:2.16.0-47.el5.centos base 3.6 M kernel-headers x86_64 2.6.18-128.1.1.el5 updates 948 k popt i386 1.10.2.3-9.el5 base 73 k popt x86_64 1.10.2.3-9.el5 base 75 k rpm x86_64 4.4.2.3-9.el5 base 1.2 M rpm-build x86_64 4.4.2.3-9.el5 base 303 k rpm-devel i386 4.4.2.3-9.el5 base 1.3 M rpm-devel x86_64 4.4.2.3-9.el5 base 1.3 M rpm-libs i386 4.4.2.3-9.el5 base 933 k rpm-libs x86_64 4.4.2.3-9.el5 base 927 k rpm-python x86_64 4.4.2.3-9.el5 base 60 k Installing for dependencies: nspr-devel x86_64 4.7.3-2.el5 base 115 k nss-devel x86_64 3.12.2.0-4.el5.centos updates 232 k Transaction Summary ================================================================================ Install 4 Package(s) Update 12 Package(s) Remove 0 Package(s) Total download size: 33 M Is this ok [y/N]: y Downloading Packages: (1/16): avahi-compat-libdns_sd-0.6.16-1.el5_2.1.x86_64.r | 23 kB 00:00 (2/16): rpm-python-4.4.2.3-9.el5.x86_64.rpm | 60 kB 00:00 (3/16): popt-1.10.2.3-9.el5.i386.rpm | 73 kB 00:00 (4/16): popt-1.10.2.3-9.el5.x86_64.rpm | 75 kB 00:00 (5/16): nspr-devel-4.7.3-2.el5.x86_64.rpm | 115 kB 00:01 (6/16): nss-devel-3.12.2.0-4.el5.centos.x86_64.rpm | 232 kB 00:01 (7/16): rpm-build-4.4.2.3-9.el5.x86_64.rpm | 303 kB 00:03 (8/16): rpm-libs-4.4.2.3-9.el5.x86_64.rpm | 927 kB 00:09 (9/16): rpm-libs-4.4.2.3-9.el5.i386.rpm | 933 kB 00:14 (10/16): kernel-headers-2.6.18-128.1.1.el5.x86_64.rpm | 948 kB 00:14 (11/16): rpm-4.4.2.3-9.el5.x86_64.rpm | 1.2 MB 00:13 (12/16): rpm-devel-4.4.2.3-9.el5.i386.rpm | 1.3 MB 00:15 (13/16): rpm-devel-4.4.2.3-9.el5.x86_64.rpm | 1.3 MB 00:16 (14/16): gdm-2.16.0-47.el5.centos.x86_64.rpm | 3.6 MB 00:43 (15/16): kernel-devel-2.6.18-128.1.1.el5.x86_64.rpm | 5.1 MB 01:10 (16/16): kernel-2.6.18-128.1.1.el5.x86_64.rpm | 17 MB 03:51 -------------------------------------------------------------------------------- Total 76 kB/s | 33 MB 07:21 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction ... This is with *no* changes to /etc/yum.repos.d/Centos-Base on the workstation but includes an update to nss-devel. I would interpret this as I got a different mirror this morning on the workstation and a bad mirror just minutes ago when I attempted to update the laptop. Changing to baseurl on the laptop got me a different mirror (or just blind luck that I didn't get the same mirror). Unfortunately, my first (bad) attempt to update the laptop has already scrolled off of the screen history. Cheers, Dave -- Politics, n. Strife of interests masquerading as a contest of principles. -- Ambrose Bierce

4 4

Nvidia driver on CentOS 5.3
by Timo Schoeler 02 Apr '09

02 Apr '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, just installed their NVIDIA-Linux-x86_64-180.44-pkg2 driver. I had it running on my CentOS 5.2 x64 machine, and I'm happily surprised that it builds and runs okay on 5.3 also. Cheers, Timo -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with CentOS - http://enigmail.mozdev.org iD8DBQFJ030pfg746kcGBOwRAiqCAJ4pNRMZm1CZ9ZE3b27M0SuWN5Me/gCeJhG2 IDpBrcFhpf3EmIH8NeqfFsE= =JaOS -----END PGP SIGNATURE-----

4 5

A set of PHP 5.2.9 RPM packages built for Enterprise Linux 4.7 and 5.3
by Michael Liang 02 Apr '09

02 Apr '09

Hello, I think the links should be useful for someone who looking for PHP 5.2 RPM using at CentOS. Have fun! http://oss.oracle.com/projects/php/ Overview This project supplies PHP 5.2.9 RPM packages built for Oracle Enterprise Linux 4.7 and 5.3 on x86 and x86_64. They will also install on Red Hat Enterprise Linux. The PHP command line, CGI interface, and an Apache module are available. Various standard extensions are included, as well as the OCI8 1.3.5 extension for Oracle Database access. The PDO_OCI driver for the PDO extension is not currently included. The packages are provided for installation convenience. They are not supported.

4 3

RPM dependency graphical viewer
by Rajagopal Swaminathan 02 Apr '09

02 Apr '09

Greetings, Has anybody come across a graphical dependency viewer for the RPM / YUM based package managers? The reason is I am unable to update to Centos 5.3 due the fact that mine is an experimental system and I have had to use various repos in the past. now it is somewhat impractical for fresh install. I do not have a whole lot of H/W. I don't mind pruning the dependency manually if I get a view -- even if it is a pstree/tree like output. Also I am yet to make headways with OO3 and oh, my uname -a shows Linux custom.xxxxxxx.com 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 i686 i386 GNU/Linux TIA Regards, Rajagopal PS. Please do not get offended if I reply late as I am in digest mode of reception from this list

1 0

Samba and iptables - woes
by Rob Kampen 02 Apr '09

02 Apr '09

Hi folk, I am trying to get iptables working on a samba server but find it is blocking something that prevents the windoze clients from being able to access the share. here are the bits from iptables: > # nmb provided netbios-ns > -A RH-Firewall-1-INPUT -p udp -m udp -s 192.168.230.100/24 -i eth1 > --dport 137 -j ACCEPT > # nmb provided netbios-dgm > -A RH-Firewall-1-INPUT -p udp -m udp -s 192.168.230.100/24 -i eth1 > --dport 138 -j ACCEPT > # Samba > -A RH-Firewall-1-INPUT -p tcp -m tcp -m state -s 192.168.230.100/24 -i > eth1 --dport 135 --state NEW -j ACCEPT > # smb provided netbios-ssn > -A RH-Firewall-1-INPUT -p tcp -m tcp -m state -s 192.168.230.100/24 -i > eth1 --dport 139 --state NEW -j ACCEPT > # smb provided microsoft-ds > -A RH-Firewall-1-INPUT -p tcp -m tcp -m state -s 192.168.230.100/24 -i > eth1 --dport 445 --state NEW -j ACCEPT so as far as I can tell this should provide access to the required services. BTW the server has two NICs; 100Mb is eth0 at 192.168.230.230 and connects to the router with internet/NAT firewall; 1Gb is eth1 at 192.168.230.232 and this connects to a G ethernet switch that has the windoze clients. The smb.conf is as follows: [global] workgroup = NDG netbios name = SAMBA netbios aliases = Samba server string = Samba Server Version %v interfaces = lo, eth1, 192.168.230.232 bind interfaces only = Yes security = DOMAIN obey pam restrictions = Yes passdb backend = tdbsam pam password change = Yes log file = /var/log/samba/%m.log max log size = 50 load printers = No add user script = /usr/sbin/useradd "%u" -n -g users delete user script = /usr/sbin/userdel "%u" add group script = /usr/sbin/groupadd "%g" delete group script = /usr/sbin/groupdel "%g" delete user from group script = /usr/sbin/userdel "%u" "%g" add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u" logon path = domain logons = Yes os level = 32 preferred master = Yes domain master = Yes dns proxy = No wins support = Yes ldap ssl = no create mask = 0664 directory mask = 0775 hosts allow = 127., 192.168.230., 192.168.231. case sensitive = Yes browseable = No available = No wide links = No dont descend = / [homes] comment = Home Directories valid users = %S read only = No browseable = Yes available = Yes [NDG] comment = NDG files path = /NDG write list = @NDGstaff, @birdseye read only = No browseable = Yes available = Yes I found that making the rule for port 139 ignore the eth port (i.e. remove the -i eth1) allowed things to work better, but do not want this to be the case as I do not want the eth0 interface to be used for this traffic. looking at netstat -l -n shows only lo and eth1 listening on port 139, so how is this failing to work?? Any ideas? Thanks Rob

7 12

gstreamer-plugins-good.x86_64 0:0.10.9-1.el5_3.1
by James B. Byrne 01 Apr '09

01 Apr '09

This update is not applying for the following reasons. Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package gstreamer-plugins-good.x86_64 0:0.10.9-1.el5_3.1 set to be updated ... --> Finished Dependency Resolution Error: Missing Dependency: libgstfft-0.10.so.0()(64bit) is needed by package gstreamer-plugins-good Error: Missing Dependency: libgstpbutils-0.10.so.0()(64bit) is needed by package gstreamer-plugins-good Error: Missing Dependency: libgstrtsp-0.10.so.0()(64bit) is needed by package gstreamer-plugins-good Error: Missing Dependency: libgstsdp-0.10.so.0()(64bit) is needed by package gstreamer-plugins-good # gstreamer-plugins-base (0.10.9-6.el5.x86_64) is installed and up to date. Is this a problem with the package or with some mis-configuration on my part? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

CentOS-announce Digest, Vol 50, Issue 1
by centos-announce-request＠centos.org 01 Apr '09

01 Apr '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Release for CentOS-5.3 i386 and x86_64 (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 01 Apr 2009 03:32:17 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] Release for CentOS-5.3 i386 and x86_64 To: centos-announce(a)centos.org, distro(a)distrowatch.com Message-ID: <49D2D231.6030702(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed We are pleased to announce the immediate availability of CentOS-5.3 for the i386 and x86_64 Architectures. CentOS-5.3 is based on the upstream release EL 5.3.0, and includes packages from all variants including Server and Client. All upstream repositories have been combined into one, to make it easier for end users to work with. And the option to further enable external repositories at install time is now available in the installer. This is just an announcement email, not the release notes. The Release Notes for CentOS-5.3 can be found on-line at : http://wiki.centos.org/Manuals/ReleaseNotes/CentOS5.3 and everyone is encouraged to look through them once. Also worth browsing through at the CentOS FAQ's at http://wiki.centos.org/FAQ +++++++++++++++++++++++ ArtWork update: CentOS-5.3 brings in a completely new artwork stack. A big thanks to Alain Reguera Delgado, Ralph Angenendt, Marcus Moeller and everyone on the Artwork SIG for bringing us the best, most comprehensive artwork set yet. Also a big thanks to all the translation teams for their contributions to the installer artwork. +++++++++++++++++++++++ Contrib repos are back: Given the widespread requests for user contributed packages directly being hosted within the centos repositories, the contribs repository is now back with CentOS-5.3. There are no packages yet, but over the next few weeks we hope to have a policy and process in place that allows users to submit and manage packages in the contrib repo. +++++++++++++++++++++++ Upgrading from CentOS-5.2 ( or CentOS-5.0 / 5.1 ): If you are already running CentOS-5.2 or an older CentOS-5 distro, all you need to do is update your machine via yum by running : 'yum update' Running 'yum list updates' before doing the update is recommended, so you can get a list of packages that are going to be updated. To check you are indeed on CentOS-5.3, run : 'rpm -q centos-release' and that should return: 'centos-release-5-3.el5.centos.1' +++++++++++++++++++++++ Upgrading from CentOS-2.1 or CentOS-3.x or CentOS-4.x: The only recommended way to update from an earlier version of CentOS ( Version < 5 ) is to download and run a fresh install. In some cases, running the installer with the 'upgradeany' option might also achieve the desired results, however you are strongly recommended to look at the CentOS Wiki where hints and notes about potential upgrade paths from CentOS-4/3/2.1 to CentOS-5 are provided. +++++++++++++++++++++++ Downloading CentOS-5.3 for new installs: When possible, consider using torrents to run the downloads. Not only does it help the community and keeps mirrors from running up high bandiwdth bills, in most cases you will find its also the fastest means to download the distro. There are present over a thousand people already seeding CentOS-5.3 and its possible to get upto 100mbps downloads via these torrents. -- Via BitTorrent : CD: http://mirror.centos.org/centos/5.3/isos/i386/CentOS-5.3-i386-bin-1to6.torr… http://mirror.centos.org/centos/5.3/isos/x86_64/CentOS-5.3-x86_64-bin-1to7.… DVD: http://mirror.centos.org/centos/5.3/isos/i386/CentOS-5.3-i386-bin-DVD.torre… http://mirror.centos.org/centos/5.3/isos/x86_64/CentOS-5.3-x86_64-bin-DVD.t… -- Via direct download: Due to bandwidth considerations the CentOS Project does not publish ISOS directly from our network machines. However direct downloads are available from external mirrors over http, ftp and rsync, and a geoip based list is available at http://isoredirect.centos.org/centos/5/isos/ to give you the best predictable match ( and only lists mirrors that are updated already, so you dont need to waste time looking for a sync'd mirror ) Some mirrors also publish DVD images that can be downloaded directly. Refer to the mirrors list page at http://www.centos.org/mirrors for more details Mirrors that offer DVD's are clearly marked on the page. sha1sum for these ISOS: i386: 4b454d76d06daa0b1772115e9b95c9465a4cecb0 CentOS-5.3-i386-bin-1of6.iso 0da3292ea1d90639714a5e7d77812568bc01ec05 CentOS-5.3-i386-bin-2of6.iso 77e867eb736b58f31cdd25c4835643ab795979e2 CentOS-5.3-i386-bin-3of6.iso 949ee93440e736c8414fb8b571178970a31e6675 CentOS-5.3-i386-bin-4of6.iso 5eafdea33c18f623bb9299ae624b8c8a12132bfa CentOS-5.3-i386-bin-5of6.iso 90ae5387a38f8ec805d877cc5525ae8dedc7f810 CentOS-5.3-i386-bin-6of6.iso b7f85a3a493e3051e50515ef881214929c88a5f3 CentOS-5.3-i386-bin-DVD.iso a0c640ae0c68cc0d9558cf4f8855f24671b3dadb CentOS-5.3-i386-netinstall.iso x86_64: 7327174dc0cbb6531bc0e2f26e24788251717e91 CentOS-5.3-x86_64-bin-1of7.iso d060ed2826a4c212eebf5e3a825ce75e77cb44e0 CentOS-5.3-x86_64-bin-2of7.iso a0b7471ec6b742c962cc06b69624b0746025005f CentOS-5.3-x86_64-bin-3of7.iso fe4106322d6b08344e82df8904142664a8a82522 CentOS-5.3-x86_64-bin-4of7.iso 8cb5539fa4241bc5d23798a3e2721b2ebd3b18fe CentOS-5.3-x86_64-bin-5of7.iso 8a8f32888279f701e15162dec6f52b5f5fb5effc CentOS-5.3-x86_64-bin-6of7.iso f053b05ea8576ea7d72116fa246f914086238ca9 CentOS-5.3-x86_64-bin-7of7.iso f8ca12b4acc714f4e4a21f3f35af083952ab46e0 CentOS-5.3-x86_64-bin-DVD.iso e971bd1677622708348b8a65264ec360a1cc0196 CentOS-5.3-x86_64-netinstall.iso +++++++++++++++++++++++ Pending CentOS-5.3 Updates and src.rpm's Updates have been issues from upstream since they released 5.3, a bulk of these updates are already released into CentOS-5.3 and are available immediately. All pending updates will be released within the next 48 hrs. To keep the initial release size smaller, the src.rpm's are also going to be slowly released into the mirrors over the next 48 hrs along with debuginfo packages. +++++++++++++++++++++++ Release Notes: The distro release notes are only available online at http://wiki.centos.org/Manuals/ReleaseNotes/CentOS5.3 The release notes include important changelog info as well as notes about the installer and outcomes from test situations which the centos-qa team worked through. Its considered essential reading. Upstream release notes are available in the NOTES/ directory of the install media. These include release specific technologies, new features in the distro and other misc infomation that can help you better utilise the distro. +++++++++++++++++++++++ Getting Help: The best place to start when looking for help with CentOS is at the wiki ( http://wiki.centos.org/GettingHelp ) which lists various options and communities who might be able to help. If you think there is a bug in the system, do report it at http://bugs.centos.org/ - but keep in mind that the bugs system is *not* a support mechanism. Some Friendly URL's : http://www.centos.org/ http://wiki.centos.org/ http://lists.centos.org/ http://bugs.centos.org/ irc://#centos@irc.freenode.net +++++++++++++++++++++++ A big thanks to everyone who contributed, including the translation teams, the qa team, the CentOS Developers and all the users out there. I would also like to thank all the users for their patience and help! Enjoy this release, tell all your friends about it too. -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 50, Issue 1 **********************************************

1 0

bash_logout
by Paul A 01 Apr '09

01 Apr '09

Hi, I was searching for the system wide bash_logout and couldn't find any documentation on it. If I create a file ~/.bash_logout file it gets executed when the user logs out but when I create a system wide /etc/bash_logout it doesn't work. Not what the issue is since I couldn't find anything on that. TIA, Paul

4 4

Re: [CentOS] Two sets of Heartbeat HTTPD clusters on same subnet
by Per Qvindesland 01 Apr '09

01 Apr '09

Even better do it your self it's not really difficould: try assigning different udp port for broadcast in both the clusters, default port used is #udpport 694 you also need them to be running in different chroot environments. Per --- Original message follows --- SUBJECT: Re: [CentOS] Two sets of Heartbeat HTTPD clusters on same subnet FROM: "Kumar, Ashish" TO: "CentOS mailing list" DATE: 01-04-2009 18:03 > Is it possible to have two sets of clusters in the one IP subnet? Indeed, it is > If yes what do I have to change so these clusters don't send messages > to the wrong nodes. Somebody might be able to help if you post your configuration files (ha.cf and haresources) for both clusters. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Re: [CentOS] I see 5.3 ISO images on the mirrors
by Christian Wahlgren 01 Apr '09

01 Apr '09

2009/4/1 Sorin Srbu <sorin.srbu(a)orgfarm.uu.se>: > I've now updated a machine with CentOS v5.3 x86_64. On this first test, the > glibc didn't update at all and threw up an dependency error. Running yum > update; no yum clean all run first, upgraded everything with no errors. Go > figure. I had the same problem with dependencies. I had to do # yum update glibc glibc-devel But when I looked in the Release Notes for CentOS-5.3, it doesn't mention "yum update glibc" at all, so maybe that upstream bug has been solved for CentOS-5.3?

3 2

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss April 2009