Discuss May 2009

discuss@lists.centos.org

254 participants
255 discussions

Calendar server
by Bowie Bailey 13 May '09

13 May '09

I recently switched to using Thunderbird for my email and installed the Lightning calendar add-on. Now all I need is a remote calendar server. I just need a simple server to support a few personal calendars and a shared calendar. Any recommendations for a CentOS / Apache based calendar server? -- Bowie

6 12

Re: [CentOS] can non-owner change file group setup?
by mcclnx mcc 13 May '09

13 May '09

I don't think that is true: (my login ID are member of DBA and OINSTALL group) $ ls -al total 13936 drwxrwxrwt 8 root root 4096 May 13 04:02 . drwxr-xr-x 32 root root 4096 Feb 11 15:36 .. -rwxrwxr-- 1 oracle dba 9 May 11 20:50 aabb $ chgrp oinstall aabb chgrp: changing group of `aabb': Operation not permitted --- 09/5/12 (二)，Les Mikesell <lesmikesell(a)gmail.com> 寫道： > 寄件者: Les Mikesell <lesmikesell(a)gmail.com> > 主旨: Re: [CentOS] can non-owner change file group setup? > 收件者: "CentOS mailing list" <centos(a)centos.org> > 日期: 2009年5月12日,二,下午3:38 > nate wrote: > > mcclnx mcc wrote: > >> We are tried to count how many files belong to > certain group. Our system > >> administrator told us "non-owner" can easy change > file group name to > >> another. I have been tried several > combination and never successful (only > >> ROOT can change file group to other name). > >> > >> Does anyone know how "no-owner" can change file > group name? > > > > If the "no-owner" user has write access to the file > they could > > copy the file to a new file name(thus getting > ownership of the > > file), and overwriting the original file with the new > file. > > You need write access in the directory, but only read > access to the > original file to do this. > > -- > Les Mikesell > lesmikesell(a)gmail.com > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > ______________________________________________________________________________________________________ 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing

2 1

Re: [CentOS] can non-owner change file group setup?
by mcclnx mcc 13 May '09

13 May '09

we plan to count how many files belong to that group. For example HR or Finance. --- 09/5/12 (二)，Filipe Brandenburger <filbranden(a)gmail.com> 寫道： > 寄件者: Filipe Brandenburger <filbranden(a)gmail.com> > 主旨: Re: [CentOS] can non-owner change file group setup? > 收件者: "CentOS mailing list" <centos(a)centos.org> > 日期: 2009年5月12日,二,下午3:13 > 2009/5/12 mcclnx mcc <mcclnx(a)yahoo.com.tw>: > > Does anyone know how "no-owner" can change file group > name? > > I believe that is not possible. > > What exactly are you trying to accomplish? > > Filipe > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > ______________________________________________________________________________________________________ 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing

2 1

Re: [CentOS] can non-owner change file group setup?
by mcclnx mcc 13 May '09

13 May '09

1 0

[Fwd: Re: How to generate a .template and .jigdo from an iso image?]
by Marcelo M. Garcia 13 May '09

13 May '09

Hi Ralph I received this e-mail from Fedora Infrastructure list. My problem at that moment was a proper syntax for the jigdo-file command. Using the their script as reference, I made a simpler one to test the command[1]. And it's working: newt (Linux) $pwd; ls -l *.jigdo *.template /users/newt2/mgarcia/iso/dvd -rw-r--r-- 1 mgarcia slocate 214226 May 13 13:44 CentOS-5.3-i386-bin-DVD.jigdo -rw-r--r-- 1 mgarcia slocate 196853099 May 13 13:44 CentOS-5.3-i386-bin-DVD.template newt (Linux) $ I copy all the files in CentOS directory of the image to the directory "/users/newt2/mgarcia/iso/os", so I could export as NFS. I don't know if there is a better way to test, but what I did was to create a centos.conf in /etc/httpd/conf.d[2]. Then in the machine called prost, issued the command: [root@prost ~]# jigdo-lite http://newt/centos/CentOS-5.3-i386-bin-DVD.jigdo Jigsaw Download "lite" Copyright (C) 2001-2005 | jigdo@ Richard Atterer | atterer.net (...) Regards mg. [1] *=====* #!/bin/sh ISO_DIR=/newt2/mgarcia/iso/dvd/CentOS-5.3-i386-bin-DVD.iso ARCH=i386 jigdo-file make-template \ --image=${ISO_DIR} \ /users/newt2/mgarcia/iso/os \ --label "Base-${ARCH}"="/users/newt2/mgarcia/iso/os" \ --uri "Base-${ARCH}"="http://mirror.centos.org/centos-5/5/os/i386" \ --force *=====* [2] Alias /centos "/users/newt2/mgarcia/iso/dvd/" <Directory "/users/newt2/mgarcia/iso/dvd/"> Options None Order allow,deny Allow from all </Directory> -------- Original Message -------- Subject: Re: How to generate a .template and .jigdo from an iso image? Date: Sun, 10 May 2009 15:22:27 +0200 From: Jeroen van Meeuwen <kanarip(a)kanarip.com> Reply-To: Fedora Infrastructure <fedora-infrastructure-list(a)redhat.com> To: Fedora Infrastructure <fedora-infrastructure-list(a)redhat.com> References: <4A034BEA.4000906(a)googlemail.com> <1241740929.12122.349.camel(a)ignacio.lan> <4A03D29D.7060408(a)googlemail.com> On 05/08/2009 08:35 AM, Marcelo M. Garcia wrote: > Hi > > I read the man page. It says that I have to specify only one of the > options "-i", "-j" or "-t". OK. If I use only -i, my template has the > same size of image, then there is no point in using jigdo. There must be > something more. > > My question is how Fedora generates the .template with only 11.1M? The > command "jigdo-file -i CentOS-5.3-i386-bin-DVD.iso" it's not enough. > Attached is the script Fedora Unity uses to jigdofy it's Re-Spins. Note the "function jigdofy()" in the top that may just help you get the syntax right. Note the double slash in the two directories passed to the "jigdo-file make-template" command, which functions as a delimiter for jigdo-file, so that in the --label parameter, we can 'label' the path and then attach a URI (--uri) to be used in the resulting .jigdo file instead. $1 is the (fully qualified) path to the .iso image, $2 is the base architecture for the .iso image (i386, x86_64 or ppc in our case), and ${version} is the Fedora $releasever (9 or 10 right now). Also note that /data/os/distr/fedora is a local, full mirror and that /data/os/archive/fedora is a local, full archive (with package files that have been removed from the mirror because for example they've expired and have been superseeded by another update to said package). Kind regards, Jeroen van Meeuwen -kanarip _______________________________________________ Fedora-infrastructure-list mailing list Fedora-infrastructure-list(a)redhat.com https://www.redhat.com/mailman/listinfo/fedora-infrastructure-list

2 2

LVM, SATA controllers and BIOS devices
by Chris Boyd 13 May '09

13 May '09

So I have an issue with CentOS 5.3 i386, LVM, and SATA. Boot device is a 200GB ATA disk on hda2. I've added a couple of disks with the on-the-mobo SATA controller ports and grown the EXT3 fs with system-config-lvm. Then, as an experiment, I added a PCI SATA controller and an additional disk. Ran system-config-lvm, added the new space to the existing VolGroup00, and all was good. Feeling confident, I shut the box down and plugged another disk in to the PCI SATA controller. On reboot, I was greeted with a kernel panic since the OS could not find "really-long-label." Removing the new SATA disk did not fix the issue. Digging about a bit with the box booted from CD in rescue mode, it appears that the LVM filesystem is intact, but the BIOS device letters (sda, sdb, sdc, etc) are scrambled in the LVM configuration somehow. After running "lvm pv<something>" I figured out that the BIOS drive letters currently assigned don't match what's in /etc/lvm/backup, archive, and so on. Obviously there's some way to read the VolGroup info from the disks, since "linux rescue" can mount the volume VolGroup00. I've tired vgrestore, but I'm still getting a kernel panic on boot from disk. What's the best way to get the LVM/BIOS config sorted out so that the system can boot up? Thanks for any hints. --Chris

4 9

CentOS 5.3 installation on HP DL380 R05 server
by Nguyen Hai Chau 13 May '09

13 May '09

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP hardware RAID-1's performance? Should I use HP's hardware RAID or software RAID in this case? Thanks a lot and looking forward to your answers. Chau My server configuration: HP DL380R05 E5420 2GB Base AP Server (1) Quad-Core IntelR XeonR Processor E5420 Two Embedded NC373i Multifunction Gigabit / 2 GB (2 x 1 GB) PC2-5300 Fully Buffered DIMMs (DDR2-667)/HP Smart Array P400/256MB Controller /Rack (2U)/Hot Plug Fully Redundant Fans Standard Two HP 146GB 10k 2.5 SAS HP SP HDD HP 1000W IEC C14 Cord RPS Kit

3 2

High CPU usage by lftp
by Rajagopal Swaminathan 13 May '09

13 May '09

Greetings, I have written a script using lftp to mirror one directory from a ftp site. I do not have access to the server except for being a humble user. This is running on a fully updated Centos 5.3 box. I am using whatever is provided by the repositories. I noticed that lftp consumes almost all of cpu times I found this while searching for a solution. http://www.mail-archive.com/lftp%40uniyar.ac.ru/msg02101.html Could it be this reason? if its not has anybody else observed what I have described? What are the possible ways of getting around . I am using --parallel=10 in the mirror sub-command of lftp TIA Rajagopal

2 12

yum dependency problem on 5.3
by fred smith 12 May '09

12 May '09

Hi! I've got three Centos-5.3 machines. one of' em ran the latest updates without trouble. the other two are giving me grief. both giving the same error: # yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: ftp.lug.udel.edu * updates: mirror.icpl.org * addons: www.gtlib.gatech.edu * extras: mirror.highspeedweb.net Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package kexec-tools.i386 0:1.102pre-56.el5_3.2 set to be updated ---> Package kernel.i686 0:2.6.18-128.1.10.el5 set to be installed ---> Package audit-libs.i386 0:1.7.7-6.el5_3.3 set to be updated ---> Package kernel-headers.i386 0:2.6.18-128.1.10.el5 set to be updated ---> Package file.i386 0:4.17-15.el5_3.1 set to be updated ---> Package audit-libs-python.i386 0:1.7.7-6.el5_3.3 set to be updated ---> Package kernel-devel.i686 0:2.6.18-128.1.10.el5 set to be installed ---> Package sos.noarch 0:1.7-9.16.el5_3.5 set to be updated ---> Package pango.i386 0:1.14.9-5.el5.centos set to be updated ---> Package audit.i386 0:1.7.7-6.el5_3.3 set to be updated --> Processing Dependency: /usr/share/magic.mime for package: httpd --> Finished Dependency Resolution httpd-2.2.3-22.el5.centos.i386 from installed has depsolving problems --> Missing Dependency: /usr/share/magic.mime is needed by package httpd-2.2.3-22.el5.centos.i386 (installed) Error: Missing Dependency: /usr/share/magic.mime is needed by package httpd-2.2.3-22.el5.centos.i386 (installed) I don't get this: /usr/share/magic/mime exists. it's not trying to install or update httpd. where is it getting this dependency problem from? More importantly, how do I resolve it? Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ------------------------ ---- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

3 3

Re: [CentOS] regex help
by nate 12 May '09

12 May '09

Joseph L. Casale wrote: >>/dev.*5$ > > Thanks, I don't know what I was thinking. Been looking at this script > too long and I wanna go home:) I got it anyway with grep '^/dev.*1$' Wouldn't that match something like /dev/sda11 ? I tried a few variations though didn't figure out the exact syntax(so used to perl regex) to match exactly 1 number at the end of the line. nate

2 1

← Newer
1
...
15
16
17
18
19
20
21
...
26
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss May 2009