Discuss July 2009

discuss@lists.centos.org

301 participants
277 discussions

Unable to install 64 bit on x3650
by Rajagopal Swaminathan 08 Jul '09

08 Jul '09

Greetings, I am trying to install Centos 5.3 on IBM x3650 with Adaptec based ServeRAID 8k Just two disk in RAID 1 When trying boot with CD1 the booting process aborts with a kernel panic saying that some unknown-de and some message saying to use the correct 'root=' boot parameter. Kindly help Thanks and Regards Rajagopal

1 2

Re: [CentOS] Question about optimal filesystem with many small files.
by Per Qvindesland 08 Jul '09

08 Jul '09

Perhaps think about running tune2fs maybe also consider adding noatime Regards Per E-mail: per(a)norhex.com [1] http://www.linkedin.com/in/perqvindesland [2] --- Original message follows --- SUBJECT: Re: [CentOS] Question about optimal filesystem with many small files. FROM: Niki Kovacs TO: "CentOS mailing list" DATE: 08-07-2009 8:41 oooooooooooo ooooooooooooo a écrit : > Hi, > > I have a program that writes lots of files to a directory tree Did that program also write your address header ? :o) _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Links: ------ [1] http://webmail.norhex.com/# [2] http://www.linkedin.com/in/perqvindesland

1 0

md0 mounted rw on boot
by David.Mackintosh＠xdroop.com 08 Jul '09

08 Jul '09

Hi folks, I updates one of my long-running CentOS 4.x systems today, and afterwards it wouldn't boot properly. My issue was that it would start, then announce: Checking root filesystem /dev/md0 is mounted. e2fsck cannot continue. After much twiddling around, I discovered that if I booted from the first kernel I had, it would boot properly. Now this is a hand-rolled RAID, not an anaconda-generated one. And I seem to recall generating an initrd myself in order for the boot process to work. Does this mean that I have to generate a new initrd every time I want to boot to a new kernel? For the record, this kernel failed: title CentOS (2.6.9-78.0.22.EL) root (hd0,0) kernel /boot/vmlinuz-2.6.9-78.0.22.EL ro quiet root=/dev/md0 initrd /boot/initrd-2.6.9-78.0.22.EL.img ...while this one succeeded: title CentOS-4 i386 (2.6.9-34.EL) root (hd0,0) kernel /boot/vmlinuz-2.6.9-34.EL ro root=/dev/md0 initrd /boot/initrd-2.6.9-34.EL.img And there are several other kernels on the system, but I honestly don't know which ones have been run successfully. Does anyone know what I did wrong? -- /\oo/\ / /()\ \ David Mackintosh | dave(a)xdroop.com | http://www.xdroop.com

1 0

Re: [CentOS] yum update error
by Les Bell 08 Jul '09

08 Jul '09

Lanny Marcus <lmmailinglists(a)gmail.com> wrote: >> IMHO, on my CentOS 5.3 (32 bit) Desktop, RPMForge works very well. I have given it a much higher Priority than EPEL. When I added the EPEL Repository, the number of excluded packages went from approximately 400 to 1705. My belief is that if EPEL had a high priority, it would replace a *LOT* of packages I do not want replaced. << Generally, you're right - but in this case, it seems to be purely an rpmforge problem. I'm getting similar problems with a mail gateway which has a lot of Perl modules to support amavisd/clamav/spamassassin: "There was a problem updating the system. The following error message was reported: "Failed to build transaction: Missing Dependency: perl(Compress::Raw::Zlib) >= 2.020 is needed by package perl-IO-Compress-2.020-1.el5.rf.noarch (rpmforge)" Checking svn at rpmforge shows: Name: perl-Compress-Raw-Zlib Version: 2.020 Release: 1 so it's in the repo. I assumed it was a problem with the mirror I was using (ftp-stud.fht-esslingen.de) so I excluded in it fastestmirror.conf and tried again, this time using fr2.rpmfind.net, but no joy: Error: Missing Dependency: perl(Compress::Raw::Zlib) >= 2.020 is needed by package perl-IO-Compress-2.020-1.el5.rf.noarch (rpmforge) At this point, I'm not going to worry too much about it - it's in the system and should eventually turn up. If not, I guess I'll have to find some time to help out at rpmforge, rebuilding those Perl modules. . . Best, --- Les Bell [http://www.lesbell.com.au] Tel: +61 2 9451 1144

1 0

Sysctl on Kernel 2.6.18-128.1.16.el5
by JohnS 08 Jul '09

08 Jul '09

Sysctl Values ------------------------------------------- net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 16777216 net.ipv4.tcp_wmem = 4096 65536 16777216 net.ipv4.tcp_window_scaling = 1 # vm.max-readahead = ? # vm.min-readahead = ? # HW Controler Off # max-readahead = 1024 # min-readahead = 256 # Memory over-commit # vm.overcommit_memory=2 # Memory to activate bdflush # vm.bdflush="40 500 0 0 500 3000 60 20 0" -------------------------------------------- What's the deal with the options with the "#"? Is the current kernel not supported any more? The ones not commented still work. I did not seem to notice this until migrating settings from a 5 machine not 5.1 but "5". I hate to ask such a dumb question but there seems to be no info from Up The Road Either. Error: sysctl -w "vm.min-readahead=256" error: "vm.min-readahead" is an unknown key Further more nothing is related in here[1] due to kernel parameter related changes. [1] http://www.centos.org/docs/5/html/release-notes/ \ RELEASE-NOTES-U3-en.html#sect-Release_Notes-Kernel_Related_Updates John

1 1

Re: [CentOS] Permission problem
by Radu-Cristian FOTESCU 07 Jul '09

07 Jul '09

http://rofi.roger-ferrer.org/eiciel/?s=2 __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/

4 5

server fails reboot - GRUB
by Rob Kampen 07 Jul '09

07 Jul '09

Hi All, Just wondering if anyone else has experienced a reboot problem. I have a intel motherboard based server of late 2004 vintage with 2 by 160GB SATA drives running linux software raid 1 with boot partition and /. The server was running 2.6.18-128.1.10 and had uptime of approx 40 days. I did a yum update and reboot yesterday and after the POST the screen showed GRUB From memory this indicates that the mbr is corrupt and grub cannot find the required files on /boot/grub (the first partition). I did a linux rescue from DVD which sets the HW raid 5 as /dev/sda and the two OS drives as sdb and sdc then ran grub and did grub> root(hd1,1) # designates that the root is to be found on the second partition of the second drive grub> setup(hd1) #writes the mbr onto the second drive (/dev/sdb) grub> root(hd2,1) # designates that the root is to be found on the second partition of the third drive grub> setup(hd2) #writes the mbr onto the third drive (/dev/sdc) grub> quit reboot ALL was well. Question is, what has happened in the last 40 days to the mbr(s)?? Not sure where to start looking. Any thoughts Thanks Rob

1 0

GUI Front End for OpenLDAP admin (users & groups)
by Robert Heller 07 Jul '09

07 Jul '09

Does there exist a GUI Front End for OpenLDAP admin for CentOS 5 (RHEL 5)? The binary (i386) rpm for directory_adminstrator works just fine with CentOS 4, but does't install under CentOS 5 and the src RPM does not build (I hacked the spec file and did install the build deps, but it is using an old hack for finding libgnome (/usr/lib/gnomeConf.sh or something like that). I installed centos-ds, but this *looks* like it is a replacement OpenLDAP's slapd, which I don't want -- I have things set up and working with slapd and don't want to migrate things again. -- Robert Heller -- 978-544-6933 Deepwoods Software -- Download the Model Railroad System http://www.deepsoft.com/ -- Binaries for Linux and MS-Windows heller(a)deepsoft.com -- http://www.deepsoft.com/ModelRailroadSystem/

10 12

Permission problem
by Niki Kovacs 07 Jul '09

07 Jul '09

Hi, I have to solve an apparently simple permission problem, and I don't know if it's the sunny weather or birdsong, well... I just can't figure it out. Here goes. I have a bunch of users in a public library. Some are "administrators": they handle the library, write the docs for everyone, etc. Then you have the "agents", who take care of lending books and fetch them when they get returned. And then you have the odd anonymous user, using the PC with a guest account. Let's make thing simple and start out with one machine. Every single user has a /home/<user> directory. Plus, I added the following directories: /home/pub and /home/echange Then, I created two groups, "administrators" and "agents". Here's what I'd like to achieve (but I think my IQ is just below the required limit :oD): 1) Members of the "administrators" group have unlimited read/write access to /home/pub and below. 2) Members of the "agents" group have read-only access to /home/pub and below. 3) All the others (that is, members of neither "administrators" and "agents") have no access at all to /home/pub, not even for listing the directory content. The thing is: I can't seem to formulate my problem in terms of user/group/others, as there are no owners, but two distinct groups involved. Any idea how to crack that nut? Niki

6 5

Formatting print with awk and ORS
by Joseph L. Casale 07 Jul '09

07 Jul '09

I have a command I execute: awk 'BEGIN { ORS=" " } { print "\"" $1 "\"" }' input_file which gives me exactly what I need, all field one's in quotes on one line each separated by one space. I now need to print a single quote around all of this, but the ORS flag is screwing me up, it's causing every attempt I try to repeat for every record. Anyone got a pointer how to do this? Thanks! jlc

2 2

← Newer
1
...
18
19
20
21
22
23
24
...
28
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2009