Discuss April 2010

discuss@lists.centos.org

265 participants
238 discussions

Viewing the NTP Server configured
by Jatin Davey 16 Apr '10

16 Apr '10

How do i know which NTP server is my linux box contacting to synchronize its time with that of the server ? Thanks Jatin

5 5

How Do I ...
by gene.poole＠macys.com 16 Apr '10

16 Apr '10

All, I've got a machine running CentOS 5.3 and this machine has got 2 - built-in 1 Gig NICs and a expansion card with 4 - 100 Meg NICs. For whatever reason at install time, it made the expansion card eth0 through eth3 and the internal ports eth4 and eth5. And by default the 'machine' is known on the network by the eth0 NIC, so my throughput is limited to 100 Mb. How can I force the internal NICs to be eth0 and eth1? Thanks, Gene Poole

11 18

Re: [CentOS] timeout problem
by tony.chamberlain＠lemko.com 15 Apr '10

15 Apr '10

Oh, static IP on the computer. Yeah, already did that to no avail. -----Original Message----- Message: 7 Date: Wed, 14 Apr 2010 13:08:16 -0400 From: JohnS <jses27(a)gmail.com> Subject: Re: [CentOS] timeout problem To: CentOS mailing list <centos(a)centos.org> Message-ID: <1271264896.3366.23.camel@ethies> Content-Type: text/plain On Wed, 2010-04-14 at 16:23 +0000, tony.chamberlain(a)lemko.com wrote: > I found the response below today online to a question I had. > For some reason I never got the mail. I am not quite clear > on what "DHCP + DFG + 2DNS entries" means when calculating the IP > to set for the router: > > Thanks > > Re: [CentOS] Yum/WGET/HTTP sourceforge etc. new > April 12, 2010 08:10AM > On Sun, 2010-04-11 at 22:57 +0000, tony.chamberlain(a)lemko.com wrote: > > > Here is what I tried. When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. > > Same with Comcast on a direct link. The times I am having problems is when our router is hooked up to a Comcast > > IP (70.88.X.Y) and assigns 192.168.5.X addresses to our machines. So when I was doing the above from 192.168.5.27 > > going through the router through Comcast is when I had the problem. > > > --- > Try this: > For the NIC on your Comcast router set its ip to one that the dhcp in > the router gives out + DFG + 2 DNS entries. In order to have it static. > I see lots of routers with your problem. > > John --- DFG = default gateway 2DNS = primary and secondary dns server addresses DHCP = Would be your normal assigned ip address from the router on the nic card that the comcast router hands out. So now you pick one ip address the router assigns from it's dhcp address block and create a static ip configuration for your eth0 nic, If the routers dhcp address block is 192.168.2.2 - 192.168.2.100 pick 192.168.2.10 for the ip. Now eth0 needs a default gateway which is your routers address maybe like 192.168.2.1. Now eth0 needs a primary and secondary DNS entry. If the isp only has one then use one else you can use the default gateway address of the router but not recomended because you are having problems so I think you need the real dns. If you log into the router you will see or find the dns entries you need and the dhcp block that is assigned. John

1 0

Re: [CentOS] Cloud on CentOS
by CList 15 Apr '10

15 Apr '10

> For what its worth...I do a little cloud-y type stuff at home. Mostly > spinning up VMs using KOAN/Cobbler and configuration with Puppet. Is that > the kind of thing you are interested in? I am deploying an application for about 200 locations, and I think cloud is what I am looking for

2 1

Power consumption monitoring
by Mathieu Baudier 15 Apr '10

15 Apr '10

Hi, I have quite a few low-end development/test servers running continuously and I would like to better manage their power consumption. I have found interesting information on how to perform CPU scaling (e.g. [1] or [2]). But I cannot find if there is a way to (software) monitor power consumption on CentOS (or other such data like CPU temperature, fan speed etc.). What I read so far is that support is quite limited in this kernel (e.g. PowerTop not providing useful information). Before I start tuning I would like to be able to measure whether my changes are having any impact at all. Thanks in advance, Mathieu [1] http://www.lesswatts.org/tips/cpu.php [2] http://www.spencerstirling.com/computergeek/powersaving.html

3 2

Cloud on CentOS
by CList 15 Apr '10

15 Apr '10

Hi, Is there any tutorial/implementation cloud on CentOS? Or anyone with experience like to share? Regards and thanks wL

5 6

Slightly OT: which hardware for CentOS file server (Samba, 2 To storage, 50 users)?
by Niki Kovacs 15 Apr '10

15 Apr '10

Hi, The language lab from the local university has contacted me. They'd like to have a low-cost file server for storing all their language video files. They have a mix of Windows, Mac OS X and even Linux clients, roughly 50 machines. The files are quite big, and they calculated a total amount of 2 To of storage. I'm not very proficient with hardware, meaning either I'm dealing with remote servers in some datacenter, or otherwise I install CentOS desktops on any hardware people throw at me. Since the aim is lowcost, would it be wrong to install that fileserver on a no-name desktop PC with a 64bit processor and enough RAM, and then simply put 2 x 2 To hard disks in it, either with a mirroring RAID (can never remember which does what in 0, 1 and 5) or some rsync script regularly copying over the first disk to the second? Or do you have something more apt to suggest? Cheers from South France, Niki

14 17

Getting Domainkeys, dkim, and SMTP-AUTH/TLS to play nicely together in sendmail
by Don Levey 14 Apr '10

14 Apr '10

A while back I struggled to get Domainkeys and DKIM to work properly on my little home server. While I'm sure they weren't necessary in a strict sense, it not only enabled me to learn about the technology but allowed for more of a verification of the email coming from my server. And so this week I figured: "Hey, this has been working without a problem for a while; it must be time to screw with something else." Hence my effort to enable SMTP submissions over port 587. At the very least, with some ISPs blocking traffic to port 25, this seemed to be a good idea (as well as providing a better method for sending email using my server from outside my home LAN). I've read a number of write-ups of SMTP AUTH, including the information at sendmail.org. I've run into a snag, however, with the .pem certificate that is used for the DK stuff. The conventional wisdom seems to be to run domainkeys/dkim as a user other than root, and a .pem certificate is required. Therefore, to get this to run properly, the permissions on the certificate need to me 600 or 400, owned by this user. All well and good so far, except that STARTTLS doesn't like this: STARTTLS=server: file /var/db/domainkeys/mail.key.pem unsafe: permission denied When I telnet to the server, port 587, and issue an EHLO, I see neither AUTH nor TLS in the response. The sendmail.mc file contains the line: define(`localCERT',`/ver/db/domainkeys/mail.key.pem')dnl So if there's a different line I can add to indicate to TLS/AUTH that it should use a different cert (or, rather, the same one copied to a different location with different permissions...) I don't know it. Anyone ever run into this before? -Don Levey

1 0

DRBD,GFS2 and GNBD without all clustered cman stuff
by Raffaele Camarda 14 Apr '10

14 Apr '10

Hi all, Where i want to arrive: 1) having two storage server replicating partition with DRBD 2) exporting via GNBD from the primary server the drbd with GFS2 3) inporting the GNBD on some nodes and mount it with GFS2 Assuming no logical error are done in the last points logic this is the situation: Server 1: LogVol09, DRDB configured as /dev/drbd0 replicated to Server 2. DRBD seems to work perfect as cat /proc/drbd Server 2: LogVol09, Secondary for /dev/drbd, cat /proc/drbd is ok What i thought to do was to export via GNBD the /dev/drbd0 to import it on a couple of nodes. Using GFS2 as FS for concurrent usage. I got to format the GFS2 FS on the Server 1 drbd0 device. But was unable to mount it because gfs_controld wasn't accepting connections, i discovered that cman manage gfs_controld. In any case i started it manually and discover that it try to use ccsd daemon which i have not installed. Ok, i do not need to mount it locally so i started configuring GNBD, started manualli the server end stated the export command...again the cman/ccsd problem: gnbd_clusterd: ERROR cannot join cman Now, what i'm asking: am i forced to use all the cluster stuff cman, ccsd...fence...with this configuration? I would like only to use the tools i need: DRDB, GNBD and GFS2 without cluster facilities. Thanks Raffaele

2 2

timeout problem
by tony.chamberlain＠lemko.com 14 Apr '10

14 Apr '10

I found the response below today online to a question I had. For some reason I never got the mail. I am not quite clear on what "DHCP + DFG + 2DNS entries" means when calculating the IP to set for the router: Thanks Re: [CentOS] Yum/WGET/HTTP sourceforge etc. new April 12, 2010 08:10AM On Sun, 2010-04-11 at 22:57 +0000, tony.chamberlain(a)lemko.com wrote: > Here is what I tried. When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. > Same with Comcast on a direct link. The times I am having problems is when our router is hooked up to a Comcast > IP (70.88.X.Y) and assigns 192.168.5.X addresses to our machines. So when I was doing the above from 192.168.5.27 > going through the router through Comcast is when I had the problem. > --- Try this: For the NIC on your Comcast router set its ip to one that the dhcp in the router gives out + DFG + 2 DNS entries. In order to have it static. I see lots of routers with your problem. John

2 1

← Newer
1
...
9
10
11
12
13
14
15
...
24
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss April 2010