Discuss October 2011

discuss@lists.centos.org

186 participants
147 discussions

{Q} Relate to daylight saving time on Nov. 6 cron job
by mcclnx mcc 10 Oct '11

10 Oct '11

We have CENTOS 4.X and 5.X on DELL servers. On Nov. 6, 2:00 A.M. will change to 1:00 A.M. If I have cron job on 1:20 A.M., will it run twice? Thanks.

2 1

multiple ifcfg-x locations on CentOS-6
by James B. Byrne 09 Oct '11

09 Oct '11

CentOS-5 $ ll /etc/sysconfig/networking/profiles/* total 0 $ ll /etc/sysconfig/networking/devices total 0 CentOS-6 $ ll /sysconfig/networking/profiles total 4 drwxr-xr-x. 2 root root 4096 Oct 7 15:19 default $ ll /sysconfig/networking/profiles/* total 24 -rw-r--r--. 2 root root 158 Oct 7 15:19 hosts -rw-r--r--. 2 root root 116 Oct 7 15:19 ifcfg-br0 -rw-r--r--. 2 root root 238 Oct 7 15:24 ifcfg-eth0 -rw-r--r--. 2 root root 117 Oct 7 15:19 ifcfg-eth1 -rw-r--r--. 2 root root 40 Oct 7 15:19 network -rw-r--r--. 2 root root 120 Oct 7 15:25 resolv.conf $ ll /etc/sysconfig/networking/devices total 12 -rw-r--r--. 2 root root 116 Oct 7 15:19 ifcfg-br0 -rw-r--r--. 2 root root 238 Oct 7 15:24 ifcfg-eth0 -rw-r--r--. 2 root root 117 Oct 7 15:19 ifcfg-eth1 I spent the better part of two hours trying to discover why I could not configure br0 to start after modifying /etc/sysconfig/network-scripts following my previously succesful notes. I finally deleted ifcfg-bro and used the existing ifcfg-eth0 and -eth1 scripts to at least get a network connection working. When I start the network service I only saw l0 and eth0 start as eth1 is disabled. However, when I did an ifconfig I saw that br0 is configured as well, but not by me. Looking for br0 in the file system led me to the directories listed above. I do not recall seeing these before and the only difference between this CentOS box and the previous virtual host I installed is that this time I selected the virtual host install option instead of minimal install. Evidently this was a misstep on my part. One that I doubt I shall repeat. My questions are: What are these duplicate, and identical, files doing in multiple places on my system; and why are they evidently interfering with the normal processing of /etc/sysconfig/network-scripts through the service utility? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 3

WARNING: Deprecated config file /etc/modprobe.conf
by Alexander Farber 09 Oct '11

09 Oct '11

Hello, I've changed the web hoster recently and also upgraded from CentOS 5 to6. Now I get this warning: # service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. # cat /etc/modprobe.conf ### Hetzner Online AG - installimage # load all modules # networking alias eth0 r8169 # hdds alias scsi_hostadapter sata_via alias scsi_hostadapter1 sata_sil alias scsi_hostadapter2 sata_nv alias scsi_hostadapter3 sd_mod alias scsi_hostadapter4 ahci alias scsi_hostadapter5 raid0 alias scsi_hostadapter6 raid1 alias scsi_hostadapter7 raid5 alias scsi_hostadapter8 raid6 alias scsi_hostadapter9 raid10 alias scsi_hostadapter10 3w-xxxx alias scsi_hostadapter11 3w-9xxx alias scsi_hostadapter12 aacraid I wonder if it is safe to # mv /etc/modprobe.conf /etc/modprobe.d/ Where there are already some files: # ll /etc/modprobe.d/ -rw-r--r--. 1 root root 52 Jul 11 10:53 anaconda.conf -rw-r--r--. 1 root root 884 Jul 20 12:46 blacklist.conf -rw-r--r--. 1 root root 382 Nov 12 2010 dist-alsa.conf -rw-r--r--. 1 root root 5596 Nov 12 2010 dist.conf -rw-r--r--. 1 root root 473 Nov 12 2010 dist-oss.conf I'd hate to lock out myself, as I don't have a remote console attached to my server. (I'd have to book it and to wait) Any opinions please? Alex

1 0

CentOS 6.0 CR mdadm-3.2.2 breaks Intel BIOS RAID
by Trey Dockendorf 09 Oct '11

09 Oct '11

I just upgraded my home KVM server to CentOS 6.0 CR to make use of the latest libvirt and now my RAID array with my VM storage is missing. It seems that the upgrade to mdadm-3.2.2 is the culprit. This is the output from mdadm when scanning that array, # mdadm --detail --scan ARRAY /dev/md0 metadata=imsm UUID=734f79cf:22200a5a:73be2b52:3388006b ARRAY /dev/md126 metadata=imsm UUID=3d135942:f0fad0b0:33255f78:29c3f50a mdadm(IMSM): Unsupported attributes : 40000000 mdadm: IMSM metadata loading not allowed due to attributes incompatibility. mdadm(IMSM): Unsupported attributes : 40000000 mdadm: IMSM metadata loading not allowed due to attributes incompatibility. ARRAY /dev/md127 container=/dev/md0 member=0 UUID=734f79cf:22200a5a:73be2b52:3388006b The error about IMSM shows up on google as something that happened to Fedora users during a FC14->FC15 upgrade. The server itself isn't old, it's a Supermicro 2U with Dual Xeon 5400 family of CPU. There are two RAIDs on this one controller...a RAID1 which still functions and a RAID5 which is the one that is unable to be seen. I don't know what IMSM is for, but the only thing strange about that array is it is 2.7TB so the BIOS configured it as two separate arrays, one as 2TB and one as 700GB, but it was showing up to CentOS as a single volume. I downgraded to 3.2.1 , ran mdadm again and bam...it works, # mdadm --detail --scan ARRAY /dev/md0 metadata=imsm UUID=734f79cf:22200a5a:73be2b52:3388006b ARRAY /dev/md126 metadata=imsm UUID=3d135942:f0fad0b0:33255f78:29c3f50a ARRAY /dev/md127 container=/dev/md0 member=0 UUID=691f975d:6beecfd8:67b39886:b7ee7f6e Hopefully this can be fixed before this version makes it to 6.1, though it's likely a problem for upstream RHEL as well. - Trey

5 9

ganglia failing dependency
by Tim Dunphy 09 Oct '11

09 Oct '11

hello list, I'm trying to install ganglia-gmetad on centos 5.6. rrdtool is already installed and librrd is there. But for some reason when I go to install this package it doesn't see that it is. [root@VIRTCENT11:/usr/local/src/ganglia-3.2.0] #yum install ganglia-gmetad Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: mirrors.lga7.us.voxel.net * epel: serverbeach1.fedoraproject.org * extras: mirror.umoss.org * rpmforge: fr2.rpmfind.net * updates: mirror.atlanticmetro.net Excluding Packages in global exclude list Finished Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package ganglia-gmetad.i386 0:3.0.7-1.el5 set to be updated --> Processing Dependency: librrd.so.2 for package: ganglia-gmetad --> Finished Dependency Resolution ganglia-gmetad-3.0.7-1.el5.i386 from epel has depsolving problems --> Missing Dependency: librrd.so.2 is needed by package ganglia-gmetad-3.0.7-1.el5.i386 (epel) Error: Missing Dependency: librrd.so.2 is needed by package ganglia-gmetad-3.0.7-1.el5.i386 (epel) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest But here are the required libraries: [root@VIRTCENT11:/usr/local/src/ganglia-3.2.0] #locate librrd.so.2 /usr/lib/librrd.so.2 /usr/lib/librrd.so.2.0.13 Does anyone have any ideas on how to get past this point? thanks!

3 2

CentOS CVE "database"?
by Nate Duehr 08 Oct '11

08 Oct '11

Was working on a project tonight to document CVE fixes applied to servers, and noted that RedHat has completely jacked up their website. In the past, I've usually just used their website for links to their CVE list, as well as links to their Errata to look up specifics for CentOS machines. It sure looks like these links are either permanently gone from the public pages to be hidden internally only available to Subscribers, or... RedHat's Marketing folks have completely destroyed what was once a valuable information-filled website. Either way... the question now becomes... Is there something similar to RedHat's CVE listings by year and number hosted by anyone in the CentOS community or by CentOS itself for CentOS? I haven't had much luck with my GoogleFu tonight. Thanks, Nate

1 1

CentOS-6.0 Continuous Release ( CR ) repository
by Timothy Murphy 08 Oct '11

08 Oct '11

I don't really understand the function of this repository, or rather why the RPMs in it are not in the standard repository? I read the outline at <http://wiki.centos.org/AdditionalResources/Repositories/CR>, and added the repository on two CentOS machines. On yum-updating some 450MB of updates were installed. Both machines appear to be running perfectly well. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

8 10

Unable to run yum update
by david 08 Oct '11

08 Oct '11

Folks The system involved is a 32-bit system, installed via the net about a week ago. The command yum update encountered the following diagonstic Error: Package: yaf-1.3.2-1.el6.rf.x86_64 (@rpmforge) Requires: libfixbuf-0.9.0.so.8()(64bit) Removing: libfixbuf-0.9.0-1.el6.rf.x86_64 (@rpmforge) libfixbuf-0.9.0.so.8()(64bit) Updated By: libfixbuf-1.0.1-1.el6.rf.x86_64 (rpmforge) Not found You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest The repositories I use are: base epel extras rpmforge updates virtualbox I wonder if using priorities would help? Rpmforge is "supposed" to be non-conflicting, but then.... Please let me know what I should do. David

5 5

Installing Ruby gems on RPM-based systems
by Kenneth Porter 08 Oct '11

08 Oct '11

When I first got involved with Red Hat (back with 5.2 in the early 90's) I learned the hard way not to use language-specific packaging systems like CPAN for Perl because they'd conflict with RPM's database and make it much harder to manage what was installed on my system. If I now need a package for which no RPM is available, I'll use a utility like cpanspec to repackage it into an RPM and install that. Now I'm starting to work with Ruby and apparently it has its own packages called "gems". How do people deal with making Ruby and RPM get along? I'm trying to build Diaspora, an open source alternative to Facebook, and it wants me to install a ton of gems. I'm working on a "disposable" machine that I can re-image at will, so I let it use Ruby's "bundle install" command to dump all the gems from the Ruby repositories into their system location. But in a "real" installation I'd want to do this with RPM, repackaging gems as needed. What's available to do this properly? <https://github.com/diaspora/diaspora/wiki/Installing-and-Running-Diaspora>

2 4

Virtual RPM howto?
by Kenneth Porter 08 Oct '11

08 Oct '11

Can someone point me to a howto or an example of a virtual package? I'm building Diaspora (the open source competitor to Facebook) and I figured it would be handy to gather all the prereqs into a virtual package. I'm working from these instructions, which seemed to go fine on CentOS 6: <https://github.com/diaspora/diaspora/wiki/Installing-on-Fedora>

2 1

← Newer
1
...
8
9
10
11
12
13
14
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss October 2011