Discuss November 2011

discuss@lists.centos.org

208 participants
155 discussions

Setting up a Virtual Machine
by John J. Boyer 21 Nov '11

21 Nov '11

I have CentOS 5.7. How would I go about setting up a virtual machine so as to run another Linux distro on top of it? Specifically Scientific Linux or Vinux, a special distro for blind users. I will be using the latter to test my BrailelBlaster software with gtk and the Orca screenreader. Will I have to assign memory to the VM permanently? Thanks, John -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

6 8

2 network card setup
by Johan Vermeulen 21 Nov '11

21 Nov '11

Dear all, I have a question regarding 2 network card setup, when e.g. using dhcp. Until a few months ago, I worked with OpenSuse. There in firewall config, you had to assign each NIC to a zone, either internal, external, DMZ or custom. Without it not much would work. I don't seen anything on CentOs in firewall config. So how does this work in CentOs? greetings, James -- Johan Vermeulen IT-medewerker Caw De Kempen johan.vermeulen(a)cawdekempen.be 0479.82.01.41 Opensource Software is the future.

3 2

build postfix spec w/ mysql
by Tim Dunphy 21 Nov '11

21 Nov '11

hello list! I am attempting to build an rpm of postfix that includes support for mysql. I've done this before with earlier versions on postfix but I am staring at this spec file until my eyes bleed and I just don't see why when I build the spec with rpmbuild mysql support isn't there. After I install the rpm I have a look at the modules as such: ldd $(which postfix) | grep -i mysql and nothing's there. I was hoping someone out there might not mind having a look at the spec file and let me know what I'm missing. # W A R N I N G -- DO NOT EDIT THIS FILE -- W A R N I N G # # postfix.spec # # This file was generated automatically from /home/sjmudd/RPM/SRC/postfix/postfix.spec.in. # If you want to build postfix with other options see make-postfix.spec in # the same directory for instructions. # -- # # File used to generate the distribution-specific postfix.spec file. # If you need to make changes to postfix.spec, make them to postfix.spec.in # and regenerate the spec file. # # See make-postfix.spec in %{_sourcedir} for more information. # # This spec file was built on distribution: rhel-5.0 # # Information imported from postfix.spec.in: DO NOT CHANGE IT BY HAND # # mysql_paths - paths where locally installed MySQL resides (or 0) # - if using this option mysql_paths should be as # follows: </pathto/mysql/include>:</pathto/mysql/lib> # e.g.: /usr/mysql/include:/usr/mysql/lib # - The order is important and only 2 directories may # be given. # requires_db - used to add dbX dependencies in the package # smtpd_multiline_greeting - my patch to allow multiline banner # mps - man page suffix, .gz except Mandrake >= 8 which uses .bz2 # with_cdb - include CDB support by Michael Tokarev # <mjt(a)corpit.ru> # with_dovecot - include DOVECOT SASL authentication # with_ldap - include LDAP support # with_mysql - include support for www.mysql.com's MySQL rpms # with_mysql_redhat - include support for RedHat's MySQL rpms # with_pcre - include pcre support # with_pgsql - include Postgres database support # with_sasl - include Cyrus SASL/AUTH support (0 to disable sasl, # 1 for sasl v1, or 2 for sasl v2, sasl_library is # the sasl library to link against, distribution dependent) # with_spf - include libspf2 library support (EXPERIMENTAL) # - rpms for libspf can be found at http://www.sosdg.org/rpm/libspf/ # with_tls - include TLS support # with_tlsfix - include TLS fix # - needed for rh6.2, rh9 and rhel3 # with_vda - add virtual delivery agent patch # # Please send bugfixes and comments to the packager. # # distribution which the spec file was built from %define distribution rhel-5.0 %define MYSQL 1 # distribution which we are building Postfix on # - call my script once to speed up build process %define distro_info %(sh $(rpm --eval '%{_sourcedir}')/postfix-get-distribution --distro-info) %define build_dist_full %(echo "%distro_info" | cut -d" " -f5) %define build_name %(echo "%distro_info" | cut -d" " -f1) %define build_major %(echo "%distro_info" | cut -d" " -f3) %define build_minor %(echo "%distro_info" | cut -d" " -f4) %define build_dist %{build_name}-%{build_major}.%{build_minor} %define mps %(test "%{build_name}" = mandrake -a "%{build_major}" -ge 8 && echo .bz2 || echo .gz) %define mysql_paths 0 %define mysql_local %(test "%{mysql_paths}" != 0 && echo 1 || echo 0) %define mysql_include %(echo "%{mysql_paths}" | cut -d: -f1) %define mysql_lib %(echo "%{mysql_paths}" | cut -d: -f2) # determine PCRE library based on distribution name %define pcre_requires %(test %{build_dist} = mandrake && echo libpcre0 || echo pcre) # determine SASL library based on distribution name %define sasl_library %(test %{build_dist} = mandrake && echo libsasl-devel || echo cyrus-sasl-devel) %define requires_db 4 %define requires_zlib 1 %define smtpd_multiline_greeting 1 # alternatives priority can now be changed in one place. # - this used to be 30 but RH seems to have defined other higher values # and some users need another value. # Don't change this unless you really think you need to. %define with_alt_prio 30 %define with_cdb 0 %define with_ldap 1 %define with_mysql 0 %define with_mysql_redhat 0 %define with_pcre 0 %define with_pgsql 0 %define with_sasl 0 %define with_spf 0 %define with_dovecot 0 %define with_tls 1 %define with_tlsfix 2 %define with_vda 0 # support the conditional builds via rpm's --with debug %define debug %{?_with_debug:1}%{?!_with_debug:0} # patch and version information %define V_vda 2.5.4 %define V_cdb 1.1.11-20021104 %define V_postfinger 1.30 # If set to 1 if official version, 0 if snapshot %define official 1 %define V_postfix 2.8.4 %define rel 1.rhel5 %if %{official} %define V_tarball %{V_postfix} %define ftp_dir official %else %define V_release_date RC2 %define V_tarball %{V_postfix}-%{V_release_date} %define ftp_dir experimental %endif # rpm does not accept '-' in version strings so replace them with a '.' # - (only affects snapshots) %define V_package %(echo %{V_tarball} | sed 's/-/./g') # rpm-workaround: # # We can NOT use %{_docdir}/%{name}-%{version} for installing the docs # from the 'install' section as RPM kindly removes this directory after # we have installed files to it. (standard part of 'doc' processing!) # #define docdir %{_docdir}/%{name}-%{version} %define docdir %{_docdir}/%{name}-%{V_package}-documentation %define readme_dir %{docdir}/readme %define html_dir %{docdir}/html %define examples_dir %{docdir}/examples %define newaliases_path %{_bindir}/newaliases.postfix %define mailq_path %{_bindir}/mailq.postfix %define rmail_path %{_bindir}/rmail.postfix %define sendmail_path %{_sbindir}/sendmail.postfix # Don't use %{_libdir} as it gives the wrong directory on x86_64 servers %define usrlib_sendmail /usr/lib/sendmail.postfix %define initdir /etc/rc.d/init.d %define whinge /usr/bin/logger -p mail.info -t postfix/rpm %define die_cmd die(){ %whinge "$*"; exit 1; } Name: postfix Group: System Environment/Daemons URL: http://www.postfix.org License: IBM Public License PreReq: chkconfig, initscripts, shadow-utils PreReq: /etc/init.d, /sbin/service, chkconfig >= 1.3 Epoch: 2 Provides: MTA smtpd smtpdaemon Provides: %{_sbindir}/sendmail %{_bindir}/mailq %{_bindir}/newaliases %{_bindir}/rmail Provides: %{_mandir}/man1/newaliases.1.%{mps} %{_mandir}/man5/newaliases.5.%{mps} Version: %{V_package} Release: %{rel} Packager: Simon J Mudd <sjmudd(a)pobox.com> Summary: Postfix Mail Transport Agent Vendor: Built on %{build_dist_full} (%{build_dist}) Source0: ftp://ftp.porcupine.org/mirrors/postfix-release/%{ftp_dir}/postfix-%{V_tarb… Source1: make-postfix.rpm Source2: postfix-get-distribution Source3: postfix-etc-init.d-postfix Source4: postfix-chroot.sh Source5: postfix-aliases Source7: postfix.spec.in Source8: make-postfix.spec Source10: README-Postfix-SASL-RedHat.txt Source12: ftp://ftp.corpit.ru/pub/postfix/postfix-dict_cdb-%{V_cdb}.tar.gz Source16: http://postfix.wl0.org/ftp/postfinger/postfinger-%{V_postfinger} # Sources >= 100 are config files Source100: postfix-sasl.conf Source101: postfix-pam.conf Source102: postfix-saslauthd.conf Patch0: postfix-vda-v10-2.8.4.patch # Obligatory Patches Patch3: postfix-files.patch Patch5: postfix-makedefs.patch # Optional patches # FIXME: There is also a 64-bit patch (not included) for 2.5.4 Patch4: http://vda.sourceforge.net/VDA/postfix-%{V_vda}-vda-ng.patch.gz # SPF patch Patch8: http://www.linuxrulz.org/nkukard/postfix/postfix-2.3/postfix-2.3.2_libspf2-… Patch99: ftp://ftp.wl0.org/SOURCES/postfix-2.8.3-multiline-greeting.patch BuildRoot: %{_tmppath}/%{name}-%{V_package}-buildroot # Determine packaging requirements BuildRequires: /usr/bin/cc, gawk, sed, ed, patch, rpm >= 4 Requires: gawk, sed, ed %if %{with_spf} BuildRequires: libspf2-devel >= 1.2.5 Requires: libspf2 >= 1.2.5 %endif %if %{requires_db} Requires: db%{requires_db} BuildRequires: db%{requires_db}-devel %endif %if %{with_cdb} Requires: tinycdb BuildRequires: tinycdb %endif %if %{with_ldap} Requires: openldap >= 1.2.9 BuildRequires: openldap-devel >= 1.2.9 %endif %if %{with_pcre} Requires: %{pcre_requires} BuildRequires: %{pcre_requires}, %{pcre_requires}-devel %endif # Needed by some Mysql and some TLS packages %if %{requires_zlib} Requires: zlib BuildRequires: zlib-devel %endif %if %{with_mysql_redhat} Requires: mysql BuildRequires: mysql, mysql-devel %endif %if %{mysql_local} BuildRequires: %{mysql_include}/mysql.h Requires: %{mysql_lib}/libmysqlclient.so %endif %if %{with_mysql} Requires: MySQL-shared BuildRequires: MySQL-shared, MySQL-devel %endif %if %{with_pgsql} Requires: postgresql-libs BuildRequires: postgresql-devel %endif %if %{with_sasl} Requires: cyrus-sasl BuildRequires: cyrus-sasl, %{sasl_library} %endif # Postfix compiled with Dovecot support only works with dovecot >= 1 # - however requiring the dovecot rpm to be installed when it may # not be used means that there will be NO explicit dependency # added to the rpm. %if %{with_dovecot} #Requires: dovecot >= 1 NOT REQUIRED / DO NOT ADD %endif %if %{with_tls} Requires: openssl BuildRequires: openssl-devel %endif %description Postfix is a Mail Transport Agent (MTA), intended to be an alternative to the widely-used sendmail. This package includes optional support for LDAP, pcre, mysql, SMTP AUTH (SASL) and TLS. See http://www.redhat.com/support/docs/faqs/RH-postfix-FAQ/book1.html, a slightly outdated FAQ, which covers the steps involved in installing and configuring postfix. The binary and source rpms I produce are currently available at http://postfix.WL0.org, ftp://ftp.WL0.org and the mirrors which can be found at the following URL: http://postfix.WL0.org/en/mirrors/ This package/specfile was built from postfix.spec.in. To see the build options used to build this package see the file %{_sysconfdir}/postfix/postfix.spec.cf To use postfix with alternative options download the source package and rebuild the binary package following the instructions in the source package or on my web page. %prep umask 022 %{die_cmd} # check custom MYSQL path values are sensible to avoid problems # with people mixing include and lib directories if [ "%{mysql_paths}" != 0 ]; then exit_error() { cat <<-EOF ************************************************************************* CUSTOM MYSQL configuration error mysql_paths=%mysql_paths (0=Not used) mysql_local=%mysql_local (0=Not used,1=used) mysql_include=%mysql_include (include directory) mysql_lib=%mysql_lib (lib directory) ERROR: $1 If you don't want to use a custom mysql installation set mysql_paths to 0. ************************************************************************* EOF exit 1 } [ $(echo "%{mysql_paths}" | awk -F: '{ print NF }') = 2 ] || \ exit_error "mysql_paths should be of the form /pathto/mysql/include:/pathto/mysql/lib, with only 2 directories" echo "%{mysql_include}" | grep -q "/lib" && \ exit_error "The first path in mysql_paths appears to be a library path: it should be an include path (e.g. /usr/local/include)" echo "%{mysql_lib}" | grep -q "/include" && \ exit_error "The second path in mysql_paths appears to be an include path: it should be a library path (e.g. /usr/local/lib)" fi # Warn if the distribution this spec file was made for isn't the same as # the current distribution, using a script in the SOURCES directory. # This will be removed and built into the spec file later. distribution=$(sh $(rpm --eval '%{_sourcedir}')/postfix-get-distribution) if [ "${distribution}" != "%{distribution}" ]; then cat <<ENDTEXT ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR This postfix.spec file may not work correctly. It was built for %{distribution}, while you are running ${distribution}. Please rebuild postfix.spec for your distribution by following the instructions in postfix.spec.cf. If this procedure does not allow you to produce a working package, please let me know. ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ERROR ENDTEXT exit 1 fi %setup -q -n postfix-%{V_tarball} %patch0 -p1 -b .vda # Apply obligatory patches %patch3 -p1 -b .alternatives %patch5 -p1 -b .notls # Apply optional patches %if %{with_cdb} %setup -n postfix-%{V_tarball} -D -T -a 12 sh dict_cdb.sh %endif %if %{with_vda} test -e %{_sourcedir}/postfix-%{V_vda}-vda-ng.patch.gz && \ gzip -dc %{_sourcedir}/postfix-%{V_vda}-vda-ng.patch.gz | patch -p1 -b --suffix .vda -s || \ die "POSTFIX RPM: %{_sourcedir}/postfix-%{V_vda}-vda.patch.gz not found or patch failed" %endif %if %{smtpd_multiline_greeting} %patch99 -p1 -b .multiline %endif %if %{with_spf} %patch8 -p1 -b .spf %endif # Modify master.cf: rmail --> rmail.postfix ed conf/master.cf <<EOF || exit 1 H ,s/rmail/rmail.postfix/ w q EOF %build umask 022 CCARGS= AUXLIBS= %ifarch s390 s390x ppc CCARGS="${CCARGS} -fsigned-char" %endif %if %{with_cdb} CCARGS="${CCARGS} -DHAS_CDB" AUXLIBS="${AUXLIBS} -lcdb" %endif %if %{with_ldap} CCARGS="${CCARGS} -DHAS_LDAP" AUXLIBS="${AUXLIBS} -L/usr/%{_lib} -lldap -llber" %endif %if %{with_pcre} # -I option required for pcre 3.4 (and later?) CCARGS="${CCARGS} -DHAS_PCRE -I/usr/include/pcre" AUXLIBS="${AUXLIBS} -lpcre" %else # we need to explicitly disable pcre unless asked for, otherwise it will # be included if present on the build system. This may cause problems. CCARGS="${CCARGS} -DNO_PCRE" %endif # Postfix compiles without needing zlib on RedHat's mysql package, but # requires zlib when using MySQL's package or if using a locally installed # MySQL binary. %if %{with_mysql} || %{with_mysql_redhat} CCARGS="${CCARGS} -DHAS_MYSQL -I/usr/include/mysql" AUXLIBS="${AUXLIBS} -L/usr/%{_lib}/mysql -lmysqlclient -lm" %endif %if %{mysql_local} CCARGS="${CCARGS} -DHAS_MYSQL -I%{mysql_include}" AUXLIBS="${AUXLIBS} -L%{mysql_lib} -lmysqlclient -lm" %endif %if %{with_pgsql} CCARGS="${CCARGS} -DHAS_PGSQL -I/usr/include/pgsql" AUXLIBS="${AUXLIBS} -lpq -lcrypt" %endif %if %{with_sasl} if [ "%{with_sasl}" -le 1 ]; then %define sasl_lib_dir %{_libdir}/sasl CCARGS="${CCARGS} -DUSE_SASL_AUTH -DUSE_CYRUS_SASL" AUXLIBS="${AUXLIBS} -L%{sasl_lib_dir} -lsasl" else %define sasl_lib_dir %{_libdir}/sasl2 CCARGS="${CCARGS} -I/usr/include/sasl -DUSE_SASL_AUTH -DUSE_CYRUS_SASL" AUXLIBS="${AUXLIBS} -L%{sasl_lib_dir} -lsasl2" fi %endif # Provide support for Dovecot SASL %if %{with_dovecot} CCARGS="${CCARGS} -DUSE_SASL_AUTH" # make dovecot the default IFF we don't include SASL if [ "%{with_sasl}" = 0 ]; then CCARGS="${CCARGS} -DDEF_SERVER_SASL_TYPE=\\\"dovecot\\\"" fi %endif %if %{with_spf} AUXLIBS="${AUXLIBS} -lspf2" CCARGS="${CCARGS} -DHAVE_NS_TYPE" %endif %if %{with_tls} # See http://www.openldap.org/lists/openldap-devel/200105/msg00008.html # - rh6.2 needs LIBS=-ldl to build correctly. # - reported by Jauder Ho <jauderho(a)carumba.com> if pkg-config openssl; then CCARGS="${CCARGS} -DUSE_TLS $(pkg-config --cflags openssl)" AUXLIBS="${AUXLIBS} $(pkg-config --libs openssl)" else # # CHECK THIS - these lines may no longer be needed (required for external TLS patch) # [ "%{with_tlsfix}" = 1 ] && LIBS=-ldl [ "%{with_tlsfix}" = 2 ] && CCARGS="${CCARGS} -I/usr/kerberos/include" CCARGS="${CCARGS} -DUSE_TLS -I/usr/include/openssl" AUXLIBS="${AUXLIBS} -lssl -lcrypto" fi %else # explicitly disable TLS otherwise will be built on machine if # openssl is available CCARGS="${CCARGS} -DNO_TLS" %endif # Required by some TLS implementations (RHEL 3 and RH9) and also some MySQL # packages %if %{requires_zlib} AUXLIBS="${AUXLIBS} -lz" %endif export CCARGS AUXLIBS make -f Makefile.init makefiles unset CCARGS AUXLIBS # -Wno-comment needed due to large number of warnings on RHEL5 # suggestion by Eric Hoeve <eric(a)ehoeve.com> make DEBUG="%{?_with_debug:-g}" OPT="$RPM_OPT_FLAGS -Wno-comment" %pre umask 022 # create postfix user and group, and maildrop group if necessary. # Use perl rather than looking in /etc/passwd or /etc/group as this works # in a wider NIS or LDAP environment /usr/bin/getent group postdrop >/dev/null || { %whinge "Adding postdrop group to system" %{_sbindir}/groupadd -r postdrop } /usr/bin/getent group postfix >/dev/null || { %whinge "Adding postfix group to system" %{_sbindir}/groupadd -r postfix } /usr/bin/getent passwd postfix >/dev/null || { %whinge "Adding postfix user to system" %{_sbindir}/useradd -d %{_var}/spool/postfix -s /bin/true -g postfix -G mail -M -r postfix } # Add postfix user to the mail group. This is needed for people using cyrus, # linked by unix sockets (amongst other things). test -z "$(id postfix | awk '{print $3}' | sed -e 's/groups=//' | grep mail)" && { %whinge "Adding postfix user to mail group" %{_sbindir}/usermod -G mail postfix } # check for a new install and see if a non package installed Postfix might # exist. Attempt to avoid overwriting the source config and provide a warning. if [ "$1" = 0 ]; then timenow=$(date +%Y%m%d-%H%M%) pretext="This is a new Postfix RPM installation" [ -f %{_sysconfdir}/postfix ] && { [ -n "$pretext" ] && %whinge "$pretext" && pretext= %whinge "Detected a possible previous non-RPM install in %{_sysconfdir}/postfix." %whinge "- going to move it out of the way to %{_sysconfdir}/postfix.$timenow." mv %{_sysconfdir}/postfix %{_sysconfdir}/postfix.$timenow } [ -d %{initdir}/postfix ] && { [ -n "$pretext" ] && %whinge "$pretext" && pretext= %whinge "Detected a possible previous non-RPM startup script %{initdir}/postfix." %whinge "- going to move it out of the way to %{initdir}/postfix.$timenow." mv %{initdir}/postfix %{initdir}/postfix.$timenow } fi exit 0 %install umask 022 [ -n "${RPM_BUILD_ROOT}" -a "${RPM_BUILD_ROOT}" != "/" ] && { rm -rf ${RPM_BUILD_ROOT} mkdir -p ${RPM_BUILD_ROOT} } %{?!debug:strip -R .comment --strip-unneeded bin/* libexec/*} # rename man pages which may conflict with sendmail's mv man/man1/mailq.1 man/man1/mailq.postfix.1 mv man/man1/newaliases.1 man/man1/newaliases.postfix.1 mv man/man1/sendmail.1 man/man1/sendmail.postfix.1 mv man/man5/aliases.5 man/man5/aliases.postfix.5 # install postfix into build root make non-interactive-package \ install_root=${RPM_BUILD_ROOT} \ config_directory=%{_sysconfdir}/postfix \ daemon_directory=%{_libexecdir}/postfix \ command_directory=%{_sbindir} \ queue_directory=%{_var}/spool/postfix \ sendmail_path=%{sendmail_path} \ newaliases_path=%{newaliases_path} \ mailq_path=%{mailq_path} \ mail_owner=postfix \ setgid_group=postdrop \ html_directory=%{html_dir} \ manpage_directory=%{_mandir} \ readme_directory=%{readme_dir} || exit 1 # To be compatible with later versions of RH sendmail/postfix packages # make /usr/lib/sendmail.postfix point to /usr/sbin/sendmail.postfix. # The alternatives then point /usr/lib/sendmail to /usr/lib/sendmail.postfix. # This *is* all a bit silly ... install -d -m755 $RPM_BUILD_ROOT/usr/lib ln -sf ../sbin/sendmail.postfix $RPM_BUILD_ROOT%{usrlib_sendmail} # RPM compresses man pages automatically. Edit postfix-files to avoid # confusing post-install. ed ${RPM_BUILD_ROOT}%{_libexecdir}/postfix/postfix-files <<EOF || exit 1 H ,s/$\/man[158]\/.*\.[158]$:/\1%{mps}:/ w q EOF # Change alias_maps and alias_database default directory to use # %{_sysconfdir}/postfix bin/postconf -c ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix -e \ "alias_maps = hash:%{_sysconfdir}/postfix/aliases" \ "alias_database = hash:%{_sysconfdir}/postfix/aliases" \ || exit 1 # Change default smtpd_sasl... parameters for dovecot # - override postfix default behaviour IFF not using cyrus sasl. # - main.cf can still be adjusted manually after installation if required. %if %{with_dovecot} if [ "%{with_sasl}" = 0 ]; then bin/postconf -c ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix -e \ "smtpd_sasl_type = dovecot" \ "smtpd_sasl_path = private/auth" \ || exit 1 fi %endif # Fix a typo in some of the documentation. perl -pi -e "s/DEF_SASL_SERVER_TYPE/DEF_SERVER_SASL_TYPE/g" */SASL_README* # Install Sys V init script mkdir -p ${RPM_BUILD_ROOT}%{initdir} install -c %{_sourcedir}/postfix-etc-init.d-postfix \ ${RPM_BUILD_ROOT}%{initdir}/postfix install -c auxiliary/rmail/rmail ${RPM_BUILD_ROOT}%{rmail_path} install -c auxiliary/qshape/qshape.pl ${RPM_BUILD_ROOT}/%{_sbindir}/qshape # copy new aliases files and generate a ghost aliases.db file cp -f %{_sourcedir}/postfix-aliases ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/aliases chmod 644 ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/aliases touch ${RPM_BUILD_ROOT}/%{_sysconfdir}/postfix/aliases.db for i in active bounce corrupt defer deferred flush incoming private saved \ hold maildrop public pid; do mkdir -p ${RPM_BUILD_ROOT}%{_var}/spool/postfix/$i done # install qmqp-source, smtp-sink & smtp-source by hand for i in qmqp-source smtp-sink smtp-source; do install -c -m 755 bin/$i ${RPM_BUILD_ROOT}%{_sbindir}/$i done # install postfinger and postfix-chroot.sh scripts # - postfix-chroot.sh is placed in /etc/postfix to make it more visible install -c -m 755 %{_sourcedir}/postfinger-%{V_postfinger} ${RPM_BUILD_ROOT}%{_bindir}/postfinger install -c -m 755 %{_sourcedir}/postfix-chroot.sh ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/ [ -d "${RPM_BUILD_ROOT}%{html_dir}" ] || mkdir -p ${RPM_BUILD_ROOT}%{html_dir} [ -d "${RPM_BUILD_ROOT}%{readme_dir}" ] || mkdir -p ${RPM_BUILD_ROOT}%{readme_dir} install -c -m 644 %{_sourcedir}/README-Postfix-SASL-RedHat.txt ${RPM_BUILD_ROOT}%{readme_dir}/ [ -d "${RPM_BUILD_ROOT}%{examples_dir}" ] || mkdir -p ${RPM_BUILD_ROOT}%{examples_dir} cp -pr examples/* ${RPM_BUILD_ROOT}%{examples_dir}/ # disable execution permissions to avoid rpm generating dependencies find ${RPM_BUILD_ROOT}%{examples_dir}/ -type f -exec chmod -x {} \; # Install odd documentation files for file in AAAREADME COMPATIBILITY COPYRIGHT HISTORY PORTING \ RELEASE_NOTES RELEASE_NOTES-1.0 RELEASE_NOTES-1.1 \ RELEASE_NOTES-2.0 RELEASE_NOTES-2.1 RELEASE_NOTES-2.2 \ RELEASE_NOTES-2.3 RELEASE_NOTES-2.4 RELEASE_NOTES-2.5 \ RELEASE_NOTES-2.6 RELEASE_NOTES-2.7 \ TLS_ACKNOWLEDGEMENTS TLS_CHANGES TLS_LICENSE \ US_PATENT_6321267 do install -c -m 644 $file ${RPM_BUILD_ROOT}%{docdir}/ done cat <<EOF >${RPM_BUILD_ROOT}%{docdir}/SEE_ALSO %{_docdir}/%{name}-%{version} may contain other documentation files. EOF # added for convenience ln -sf %{html_dir} ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/html ln -sf %{readme_dir} ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/readme ln -sf %{examples_dir} ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/examples # Install the smtpd.conf file for SASL support. %if %{with_sasl} mkdir -p ${RPM_BUILD_ROOT}%{sasl_lib_dir} install -m 644 %SOURCE100 ${RPM_BUILD_ROOT}%{sasl_lib_dir}/smtpd.conf mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/pam.d install -m 644 %SOURCE101 ${RPM_BUILD_ROOT}%{_sysconfdir}/pam.d/smtp.postfix mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig install -m 644 %SOURCE102 ${RPM_BUILD_ROOT}%{_sysconfdir}/sysconfig/saslauthd.postfix %endif # Include README.rpm explaining where the documentation can be found and # also pointing out how to get updated copies of my package cat <<EOF > ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/README.rpm README.rpm ========== Documentation ------------- Postfix documentation should be available in the directory %{docdir}/. I have also added a symbolic link to the readme_files and html directories from %{_sysconfdir}/postfix. The main Postfix web site is http://www.postfix.org. Packages -------- Newer versions of source and standard binary packages may be available from http://ftp.WL0.org or the mirrors listed at http://postfix.WL0.org. Look in the appropriate directory according to your distribution. Mailing List ------------ I host a mailing list to announce new packages as they are released. If you are interested in subscribing take a look at http://postfix.WL0.org/en/lists/. Previous announcements are archived. Chrooting --------- The chroot behaviour of my packages has changed over time. Current packages will NOT turn on the chroot environment in Postfix. Older versions did the opposite. If you upgrade from an older version of my package the chroot behaviour will NOT be changed. (Check %{_sysconfdir}/postfix/master.cf for details.) I have provided a simple script postfix-chroot.sh which attempts to cover most situations and should enable you to disable or enable the chroot on your system with little effort. Package Build Options --------------------- This package can be built on several Linux distributions and with several optional features. %{_sysconfdir}/postfix/postfix.spec.cf contains the information used to build this version of the rpm. It can also be used to build a new rpm with the same options. Enjoy! Simon J Mudd, <sjmudd(a)pobox.com> EOF # generate postfix.spec.cf # - used to build a newer version of the rpm with the same parameters # as the current package. # - provides build instructions cat - %{_sourcedir}/postfix.spec.cf <<EOF | sed -e '/^# NOTE:/d' > ${RPM_BUILD_ROOT}%{_sysconfdir}/postfix/postfix.spec.cf # # This file contains the following information: # # - configuration options used to build the installed postfix rpm # - generated when the binary rpm was built # # - Postfix RPM build instructions # - for upgrading the installed rpm with the same options # - for building the rpm with other options # # 1. CONFIGURATION OPTIONS OF INSTALLED BINARY RPM # # Package built on: %{build_dist_full} (%{build_dist}) POSTFIX_ALT_PRIO=%{with_alt_prio} POSTFIX_CDB=%{with_cdb} POSTFIX_DB=%{requires_db} POSTFIX_DOVECOT=%{with_dovecot} POSTFIX_LDAP=%{with_ldap} POSTFIX_MYSQL=%{with_mysql} POSTFIX_MYSQL_PATHS=%{mysql_paths} POSTFIX_MYSQL_REDHAT=%{with_mysql_redhat} POSTFIX_PCRE=%{with_pcre} POSTFIX_PGSQL=%{with_pgsql} POSTFIX_SASL=%{with_sasl} POSTFIX_SMTPD_MULTILINE_GREETING=%{smtpd_multiline_greeting} POSTFIX_SPF=%{with_spf} POSTFIX_TLS=%{with_tls} POSTFIX_VDA=%{with_vda} # export values to child processes export POSTFIX_MYSQL POSTFIX_MYSQL_PATHS POSTFIX_MYSQL_REDHAT \\ POSTFIX_LDAP POSTFIX_PCRE POSTFIX_PGSQL \\ POSTFIX_SASL POSTFIX_TLS POSTFIX_VDA \\ POSTFIX_SMTPD_MULTILINE_GREETING POSTFIX_DB \\ POSTFIX_INCLUDE_DB POSTFIX_SPF \\ POSTFIX_CDB POSTFIX_ALT_PRIO POSTFIX_DOVECOT # other options used in the build (but not explicitly changeable by the user) are: # - debug=%{?_with_debug:1}%{?!_with_debug:0} # - pcre_requires=%{pcre_requires}, # - requires_zlib=%{requires_zlib}, # - sasl_library=%{sasl_library} # - tlsfix=%{with_tlsfix} # # %{_sysconfdir}/postfix/makedefs.out is also produced by the build and may be of # interest if you are building Postfix by hand. EOF %post umask 022 chkconfig --add postfix # Upgrade configuration as necessary %{_sbindir}/postfix set-permissions upgrade-configuration \ setgid_group=postdrop mail_owner=postfix \ || : %{_sbindir}/postalias %{_sysconfdir}/postfix/aliases %{_sbindir}/postfix check || : # Add submission to services if not found, required for rh <= 7.0 if ! grep -q ^submission %{_sysconfdir}/services then cat <<EOF >>%{_sysconfdir}/services submission 587/tcp msa # mail message submission submission 587/udp msa # mail message submission EOF fi # Add smtps to services if not found if ! grep -q ^smtps %{_sysconfdir}/services then cat <<EOF >>%{_sysconfdir}/services smtps 465/tcp # SMTP over SSL (TLS) EOF fi # If using sasl create %{_sysconfdir}/sysconfig/saslauthd if necessary # - this file is provided in some (but not all) cyrus-sasl packages # - RHEL3 provides this file in cyrus-sasl >= 2.1.18-2 %if %{with_sasl} [ -f %{_sysconfdir}/sysconfig/saslauthd ] || { grep -v "^# NOTE: " %{_sysconfdir}/sysconfig/saslauthd.postfix > %{_sysconfdir}/sysconfig/saslauthd chmod 644 %{_sysconfdir}/sysconfig/saslauthd %{whinge} "creating new %{_sysconfdir}/sysconfig/saslauthd from local Postfix copy" } %endif # Add comments to the /etc/dovecot.conf configuration file if it exists # showing how to configure with Postfix if needed. If postfix is mentioned # in the dovecot configuration file then DO NOTHING. DOVECOT_CONF=/etc/dovecot.conf if [ -f $DOVECOT_CONF ] && ! grep -q postfix $DOVECOT_CONF; then # Check if auth default is configured and add a COMMENTED SECTION # taken from the SASL_README file. if grep -q 'auth default' $DOVECOT_CONF; then ed $DOVECOT_CONF <<-EOF_END || exit 1 /auth default { a # Postfix - suggested configuration taken from SASL_README (2.3.2). # mechanisms = plain login # socket listen { # client { # path = /var/spool/postfix/private/auth # mode = 0660 # user = postfix # group = postfix # } # } . w q EOF_END else # Add the whole section at the end. cat <<-EOF_END >> $DOVECOT_CONF # Postfix - suggested configuration taken from SASL_README (2.3.2). #auth default { # mechanisms = plain login # passdb pam { # } # userdb passwd { # } # socket listen { # client { # path = /var/spool/postfix/private/auth # mode = 0660 # user = postfix # group = postfix # } # } #} EOF_END fi fi # Apply the alternatives scripts ONLY if installing (not upgrading) to # ensure a link exists from %{_sbindir}/sendmail to # %{sendmail_path} (and other files). # # If performing an upgrade this MUST be done in the trigger scripts. # (old postfix packages, pre-alternatives have a /usr/sbin/sendmail and this # gets removed _AFTER_ the %post stage when the old package is removed) [ "$1" = 1 ] || exit 0 # See changelog for explanation of mta-sendmailman entry. %{_sbindir}/alternatives --install %{_sbindir}/sendmail mta %{sendmail_path} %{with_alt_prio} \ --slave %{_bindir}/mailq mta-mailq %{mailq_path} \ --slave %{_bindir}/newaliases mta-newaliases %{newaliases_path} \ --slave %{_bindir}/rmail mta-rmail %{rmail_path} \ --slave /usr/lib/sendmail mta-sendmail %{usrlib_sendmail} \ --slave %{_mandir}/man8/sendmail.8%{mps} mta-sendmailman %{_mandir}/man1/sendmail.postfix.1%{mps} \ --slave %{_mandir}/man1/mailq.1%{mps} mta-mailqman %{_mandir}/man1/mailq.postfix.1%{mps} \ --slave %{_mandir}/man1/newaliases.1%{mps} mta-newaliasesman %{_mandir}/man1/newaliases.postfix.1%{mps} \ --slave %{_mandir}/man5/aliases.5%{mps} mta-aliasesman %{_mandir}/man5/aliases.postfix.5%{mps} \ --initscript postfix exit 0 %triggerpostun -- sendmail # If removing sendmail and not using alternatives: replace with postfix equivalents %whinge "%{V_postfix}-%{rel} triggerpostun -- sendmail: final number of sendmail packages=$2" [ $2 = 0 ] || exit 0 # See changelog for explanation of mta-sendmailman entry. %{_sbindir}/alternatives --install %{_sbindir}/sendmail mta %{sendmail_path} %{with_alt_prio} \ --slave %{_bindir}/mailq mta-mailq %{mailq_path} \ --slave %{_bindir}/newaliases mta-newaliases %{newaliases_path} \ --slave %{_bindir}/rmail mta-rmail %{rmail_path} \ --slave /usr/lib/sendmail mta-sendmail %{usrlib_sendmail} \ --slave %{_mandir}/man8/sendmail.8%{mps} mta-sendmailman %{_mandir}/man1/sendmail.postfix.1%{mps} \ --slave %{_mandir}/man1/mailq.1%{mps} mta-mailqman %{_mandir}/man1/mailq.postfix.1%{mps} \ --slave %{_mandir}/man1/newaliases.1%{mps} mta-newaliasesman %{_mandir}/man1/newaliases.postfix.1%{mps} \ --slave %{_mandir}/man5/aliases.5%{mps} mta-aliasesman %{_mandir}/man5/aliases.postfix.5%{mps} \ --initscript postfix exit 0 # ensure the trigger exit status is 0 %triggerpostun -- postfix # If upgrading postfix some versions are pre-alternatives and use # /usr/sbin/sendmail. After uninstalling the old package this file will be # missing and we need to link to the new postfix sendmail binary. %whinge "%{V_postfix}-%{rel} triggerpostun -- postfix: final number of Postfix packages=$2" [ $2 -gt 0 ] || exit 0 # See changelog for explanation of mta-sendmailman entry. %{_sbindir}/alternatives --install %{_sbindir}/sendmail mta %{sendmail_path} %{with_alt_prio} \ --slave %{_bindir}/mailq mta-mailq %{mailq_path} \ --slave %{_bindir}/newaliases mta-newaliases %{newaliases_path} \ --slave %{_bindir}/rmail mta-rmail %{rmail_path} \ --slave /usr/lib/sendmail mta-sendmail %{usrlib_sendmail} \ --slave %{_mandir}/man8/sendmail.8%{mps} mta-sendmailman %{_mandir}/man1/sendmail.postfix.1%{mps} \ --slave %{_mandir}/man1/mailq.1%{mps} mta-mailqman %{_mandir}/man1/mailq.postfix.1%{mps} \ --slave %{_mandir}/man1/newaliases.1%{mps} mta-newaliasesman %{_mandir}/man1/newaliases.postfix.1%{mps} \ --slave %{_mandir}/man5/aliases.5%{mps} mta-aliasesman %{_mandir}/man5/aliases.postfix.5%{mps} \ --initscript postfix exit 0 # ensure the trigger exit status is 0 %preun umask 022 # remove the directory and depth levels of subdirectories queue_hash_depth_remove () { local dir=$1 local depth=$2 local new_depth local a [ -d "$dir" ] && { if [ "$depth" -gt 0 ]; then new_depth=$(($depth - 1)) for a in 0 1 2 3 4 5 6 7 8 9 A B C D E F; do test -d $dir/$a && queue_hash_depth_remove $dir/$a $new_depth done fi rm -f $dir/* rmdir $dir || %whinge "WARNING: preun - unable to remove directory %{_var}/spool/postfix/$dir" } } # remove the rest of the queue directory structure queue_directory_remove () { # remove the hashed directories depth=$(postconf -h hash_queue_depth) for dir in $(postconf -h hash_queue_names | sed -e 's/,/\n/g; s/ //g'); do queue_hash_depth_remove $dir $depth done # now remove the other directories for dir in corrupt hold maildrop pid private public saved; do queue_hash_depth_remove $dir 0 done } # No more postfix packages left so prepare to finish package removal. # _In theory_ there is no chroot environment now, so there is no need to # clean it out. # However it may be prudent later to add back a call to # /etc/postfix/postfix-chroot.sh disable # just to make sure, but won't do this yet. (If you think I should let # me know). if [ "$1" = 0 ]; then service postfix stop >/dev/null 2>&1 chkconfig --del postfix %{_sbindir}/alternatives --remove mta %{sendmail_path} # userdel also deletes the user's group %{_sbindir}/userdel postfix || %whinge "WARNING: failed to remove user postfix" %{_sbindir}/groupdel postdrop || %whinge "WARNING: failed to remove group postdrop" cd %{_var}/spool/postfix && queue_directory_remove fi exit 0 %postun umask 022 if [ "$1" -ge 1 ]; then service postfix condrestart || : # don't use readlink as this is not available on rh73 mta=`[ -L /etc/alternatives/mta ] && ls -la /etc/alternatives/mta | awk '{ print $11 }'` if [ "$mta" = "%{sendmail_path}" ]; then %{_sbindir}/alternatives --set mta %{sendmail_path} fi fi exit 0 %clean umask 022 [ -n "${RPM_BUILD_ROOT}" -a "${RPM_BUILD_ROOT}" != "/" ] && { rm -rf ${RPM_BUILD_ROOT} } || : %files %defattr(-, root, root) %if %{with_sasl} %config(noreplace) %{sasl_lib_dir}/smtpd.conf %config(noreplace) %{_sysconfdir}/pam.d/smtp.postfix %config(noreplace) %{_sysconfdir}/sysconfig/saslauthd.postfix %endif %verify(not md5 size mtime) %config %dir %{_sysconfdir}/postfix %attr(0644, root, root) %{_sysconfdir}/postfix/LICENSE %attr(0644, root, root) %{_sysconfdir}/postfix/TLS_LICENSE %attr(0444, root, root) %config %{_sysconfdir}/postfix/makedefs.out %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/main.cf %attr(0644, root, root) %{_sysconfdir}/postfix/main.cf.default %attr(0644, root, root) %{_sysconfdir}/postfix/bounce.cf.default %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/master.cf %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/access %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/aliases %attr(0644, root, root) %verify(not md5 size mtime) %ghost %{_sysconfdir}/postfix/aliases.db %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/canonical %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/generic %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/header_checks %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/relocated %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/transport %attr(0644, root, root) %verify(not md5 size mtime) %config(noreplace) %{_sysconfdir}/postfix/virtual %attr(0755, root, root) %config %{_libexecdir}/postfix/postfix-script %attr(0755, root, root) %{_libexecdir}/postfix/postfix-wrapper %attr(0755, root, root) %{_libexecdir}/postfix/postmulti-script %attr(0755, root, root) %config %{_libexecdir}/postfix/post-install %attr(0644, root, root) %{_libexecdir}/postfix/postfix-files %attr(0644, root, root) %{_libexecdir}/postfix/main.cf %attr(0644, root, root) %{_libexecdir}/postfix/master.cf %attr(0755, root, root) %{_libexecdir}/postfix/dnsblog %attr(0755, root, root) %{_libexecdir}/postfix/postscreen %attr(0755, root, root) %{_libexecdir}/postfix/tlsproxy %attr(0644, root, root) %{_sysconfdir}/postfix/README.rpm %attr(0644, root, root) %{_sysconfdir}/postfix/postfix.spec.cf # convenience links %{_sysconfdir}/postfix/html %{_sysconfdir}/postfix/readme %{_sysconfdir}/postfix/examples %attr(0755, root, root) %{_sysconfdir}/postfix/postfix-chroot.sh %attr(0755, root, root) %config %{initdir}/postfix %dir %verify(not md5 size mtime) %{_var}/spool/postfix # For correct directory permissions check postfix-install script %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/active %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/bounce %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/corrupt %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/defer %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/deferred %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/flush %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/hold %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/incoming %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/private %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/spool/postfix/saved %dir %attr(0730, postfix, postdrop) %verify(not md5 size mtime) %{_var}/spool/postfix/maildrop %dir %attr(0710, postfix, postdrop) %verify(not md5 size mtime) %{_var}/spool/postfix/public %dir %attr(0755, root, root) %verify(not md5 size mtime) %{_var}/spool/postfix/pid %dir %attr(0700, postfix, root) %verify(not md5 size mtime) %{_var}/lib/postfix %doc %{docdir}/AAAREADME %doc %{docdir}/COMPATIBILITY %doc %{docdir}/COPYRIGHT %doc %{docdir}/HISTORY %doc %{docdir}/PORTING %doc %{docdir}/RELEASE_NOTES %doc %{docdir}/RELEASE_NOTES-1.0 %doc %{docdir}/RELEASE_NOTES-1.1 %doc %{docdir}/RELEASE_NOTES-2.0 %doc %{docdir}/RELEASE_NOTES-2.1 %doc %{docdir}/RELEASE_NOTES-2.2 %doc %{docdir}/RELEASE_NOTES-2.3 %doc %{docdir}/RELEASE_NOTES-2.4 %doc %{docdir}/RELEASE_NOTES-2.5 %doc %{docdir}/RELEASE_NOTES-2.6 %doc %{docdir}/RELEASE_NOTES-2.7 %doc %{docdir}/SEE_ALSO %doc %{docdir}/TLS_ACKNOWLEDGEMENTS %doc %{docdir}/TLS_CHANGES %doc %{docdir}/TLS_LICENSE %doc %{docdir}/US_PATENT_6321267 %doc %dir %{readme_dir} %doc %{readme_dir}/* %doc %dir %{html_dir} %doc %{html_dir}/* %doc %dir %{examples_dir} %doc %dir %{examples_dir}/chroot-setup %dir %dir %{examples_dir}/qmail-local %dir %dir %{examples_dir}/smtpd-policy %doc %{examples_dir}/chroot-setup/* %doc %{examples_dir}/qmail-local/* %doc %{examples_dir}/smtpd-policy/* %dir %attr(0755, root, root) %verify(not md5 size mtime) %{_libexecdir}/postfix %{_libexecdir}/postfix/anvil %{_libexecdir}/postfix/bounce %{_libexecdir}/postfix/cleanup %{_libexecdir}/postfix/discard %{_libexecdir}/postfix/error %{_libexecdir}/postfix/flush %{_libexecdir}/postfix/lmtp %{_libexecdir}/postfix/local %{_libexecdir}/postfix/master %{_libexecdir}/postfix/nqmgr %{_libexecdir}/postfix/oqmgr %{_libexecdir}/postfix/pickup %{_libexecdir}/postfix/pipe %{_libexecdir}/postfix/proxymap %{_libexecdir}/postfix/qmgr %{_libexecdir}/postfix/qmqpd # including as installed by Wietse even with -DNO_TLS ? %{_libexecdir}/postfix/scache %{_libexecdir}/postfix/showq %{_libexecdir}/postfix/smtp %{_libexecdir}/postfix/smtpd %{_libexecdir}/postfix/spawn # including as installed by Wietse even with -DNO_TLS ? %{_libexecdir}/postfix/tlsmgr %{_libexecdir}/postfix/trivial-rewrite %{_libexecdir}/postfix/verify %{_libexecdir}/postfix/virtual %{_sbindir}/postalias %{_sbindir}/postcat %{_sbindir}/postconf %attr(2755,root,postdrop) %{_sbindir}/postdrop %attr(2755,root,postdrop) %{_sbindir}/postqueue %{_sbindir}/postfix %{_sbindir}/postkick %{_sbindir}/postlock %{_sbindir}/postlog %{_sbindir}/postmap %{_sbindir}/postmulti %{_sbindir}/postsuper %{_sbindir}/smtp-sink %{_sbindir}/smtp-source %{_sbindir}/qmqp-source %{sendmail_path} %{mailq_path} %{newaliases_path} %{usrlib_sendmail} %attr(0755, root, root) %{rmail_path} %attr(0755, root, root) %{_bindir}/postfinger %attr(0755, root, root) %{_sbindir}/qshape %{_mandir}/*/* ############################################################################## # List of changes made to this package. # # Although old entries from the changelog have been removed most of them # are available from my CVS repository of changes made to this file. # %changelog * Tue Jul 19 2011 Simon J Mudd <sjmudd(a)pobox.com> 2.8.4-1 - upgrade to postfix-2.8.4-1 * Sat Jul 16 2011 Simon J Mudd <sjmudd(a)pobox.com> 2.8.3-3 - minor changes to recognise CentOS / RHEL 6 * Thu Jun 23 2011 Simon J Mudd <sjmudd(a)pobox.com> 2.8.3-2 - update to 2.8.3 - add patched multiline greeting provided kindly by Marian Marinov <mm(a)yuhu.biz> * Sun Apr 03 2011 Simon J Mudd <sjmudd(a)pobox.com> 2.8.2-1 - update to 2.8.2 - removed some files after doing the upgrade which postfix tells me are no longer needed. - change to use make package and also remove direct use of post-install * Sat Mar 12 2011 Simon J Mudd <sjmudd(a)pobox.com> 2.8.1-0.1testing - preliminary changes to use postfix-2.8 tree - smtpd multiline gretting patch disabled (temporarily) * Thu Mar 10 2011 Simon J Mudd <sjmudd(a)pobox.com> 2.7.3-1 - update to 2.7.3 * Sat Dec 11 2010 Simon J Mudd <sjmudd(a)pobox.com> 2.7.1-2 - update to 2.7.2 * Tue Jun 15 2010 Simon J Mudd <sjmudd(a)pobox.com> 2.7.1-1 - update to 2.7.1 * Tue Feb 23 2010 Simon J Mudd <sjmudd(a)pobox.com> 2.7.0-1 - update to 2.7.0 based on work by Hari Hendaryanto <hari.h(a)csmcom.com> see http://www.kutukupret.com/2010/02/08/compiling-postfix-2-7-0-as-rpm-package/ * Wed Sep 02 2009 Simon J Mudd <sjmudd(a)pobox.com> 2.6.5-1 - upgrade to 2.6.5 * Sun May 24 2009 Simon J Mudd <sjmudd(a)pobox.com> 2.6.1-1 - upgrade to 2.6.1 * Sun May 24 2009 Simon J Mudd <sjmudd(a)pobox.com> 2.6.0-1 - upgrade to 2.6.0 Thanks in advance!! Tim

5 6

recommendations for encrypting files?
by Helmut Drodofsky 19 Nov '11

19 Nov '11

I would like to encrypt and decrypt Files sent as attachment in Linux, Mac and Windows Systems Recommendations? Best regard Helmut

4 3

high availability ideas
by nux＠li.nux.ro 19 Nov '11

19 Nov '11

Hi, I'm looking for some recommendations. I need to have some sort of high availability for a set of php & mysql web sites, they must be hosted on 2 servers, in separate data centres and obviously on differrent IPs. I can't use a load balancer because that will introduce a single point of failure making the "distributed setup" useless. I was thinking some sort of drbd/glusterfs/mysql-master-master replication and figure out how to make the dns system responsible with the fail over. Am I going too far with this? Thanks.

5 11

Thinkpad E320 with CentOS 5.7
by Olaf Mueller 19 Nov '11

19 Nov '11

Hello, is anybody there who uses a Lenovo ThinkPad Edge E320 NWY3RGE (13.3") with CentOS 5.7? Ethernet and wireless lan is working with newer kernels from elrepo, but I could not get the graphic card working in the right resolution (1366x768). 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd \ Generation Core Processor Family Integrated Graphics Controller \ [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21ee] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Memory at c0000000 (64-bit, prefetchable) [size=256M] I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 2 Capabilities: [a4] PCI Advanced Features regards Olaf

1 0

Re: [CentOS] Squid 3 with SSL Bump on Centos 5.7
by Fawzy Ibrhim 19 Nov '11

19 Nov '11

I have successfully installed Squid 3 on Centos 5.7; and after I follow the guide:- https://dvas0004.wordpress.com/2011/03/22/squid-transparent-ssl-interceptio…. Now I have the following two lines in my squid.conf:- http_port <Internal_IP>:8080 transparent https_port <Internal_IP>:3128 ssl-bump transparent cert=/etc/pki/CA/server.crt key=/etc/pki/CA/private/server.key Now users start receiving a warning for each time they access any HTTPS site about certificates mismatch including the sites included in "ssl_bump deny *"

1 0

Changes at Red Hat confouding CentOS (was: What happened to 6.1)
by Alan McKay 19 Nov '11

19 Nov '11

These seems to me to be the first message in the series and provides a really good summary of the changes at Red Hat which seem to be making life a lot more difficult for CentOS. Just figured I'd pull it out of that thread and change the subject line. Below Johnny's email I've copied another from the original thread, written by Lamar Owen, which gives some good explanation on how Red Hat is able to get away with this. Basically from what I gather, while Red Hat cannot restrict access to sources, they can restrict access to binaries. And since CentOS has a goal of binary compatibility with upstream, they are essentially left trying to hit an unknown target. But (now I'm stretching my limited knowledge even further) Scientific does not have this restriction since they are less concerned about exact binary compat. On Fri, Oct 21, 2011 at 12:54 PM, Johnny Hughes <johnny(a)centos.org> wrote: > On 10/21/2011 10:01 AM, Les Mikesell wrote: >> On Fri, Oct 21, 2011 at 9:51 AM, Nicolas Thierry-Mieg >> <Nicolas.Thierry-Mieg(a)imag.fr> wrote: >> >>>> Johnny, chill. I don't blame him for being confused. Up until right now, >>>> you updated to a point release, then, over the weeks and months, there >>>> were updates. All of a sudden, there are *no* updates for the 6.0 point >>>> release, which is a major change in what everyone expected, based on >>>> history. >>> >>> this is the way it has always been: once upstream releases x.y+1 , there >>> are no more updates to x.y (in upstream and therefore also in centos), >>> until centos releases x.y+1 . >> >> Yes, but that used to be transparent, because the centos x.y+1 release >> happened quickly so it didn't matter that the update repo was held >> back until an iso build was done. >> > > Yes, and NOW the release process is MUCH harder. > > Red Hat used to have an AS release that contained everything ... we > build that and we get everything. Nice and simple. Build all the > packages, look at it against the AS iso set ... done. Two weeks was > about as long as it took. > > Now, for version 6, they have: > > Red Hat Enterprise Linux Server (v. 6) > Red Hat Enterprise Linux Workstation (v. 6) > Red Hat Enterprise Linux Desktop (v. 6) > Red Hat Enterprise Linux HPC Node (v. 6) > Red Hat Enterprise Linux Workstation FasTrack (v. 6) > Red Hat Enterprise Linux Server FasTrack (v. 6) > Red Hat Enterprise Linux Desktop FasTrack (v. 6) > Red Hat Enterprise Linux Scalable File System (v. 6) > Red Hat Enterprise Linux Resilient Storage (v. 6) > Red Hat Enterprise Linux Load Balancer (v. 6) > Red Hat Enterprise Linux HPC Node FasTrack (v. 6) > Red Hat Enterprise Linux High Performance Network (v. 6) > Red Hat Enterprise Virtualization > > They have the same install groups with different packages based on the > above groupings, so we have to do some kind of custom generation of the > comps files to things work. > > They have created an optional channel in several of those groupings that > is only accessible via RHN and they do not put those RPMS on any ISOs > ... and they have completely changed their "Authorized Use Policy" so > that we can NOT login to RHN and use anything that is not on a public > FTP server or on an ISO set ... effectively cutting us off from the > ability to check anything on the optional channel. > > Now we have to engineer a compilation of all those groupings, we have to > figure out what parts of the optional channels go at the point release > and which ones do not (the ones that are upgrades). Sometimes the only > way to tell is when something does not build correctly and you have > reverse an optional package to a previous version for the build, etc. > > We have to use anaconda to build our ISOs and upstream is using > "something else" to build theirs .. so anaconda NEVER works anymore out > of the box. We get ISOs (or usb images) that do not work and have to > basically redesign anaconda. > > We can't look at upstream build logs, we can't get all the binary RPMs > for testing and be within the Terms of Service. > > And with the new release, it seems that they have purposely broken the > rpmmacros, and do not care to fix it: > > https://bugzilla.redhat.com/show_bug.cgi?id=743229 > > So, trust me, it is MUCH more complicated now than it was with previous > releases to build. > > With the 5.7 release, there were several SRPMS that did not make it to > the public FTP server without much prompting from us. And with the > Authorized Use Policy, I can not just go to RHN and grab that SRPM and > use it. If it is not public, we can no longer release it. > > So, the short answer is, it now takes longer. > > Thanks, > Johnny Hughes Lamar Owen lowen(a)pari.edu via centos.org Oct 28 to CentOS On Friday, October 21, 2011 02:22:26 PM Les Mikesell wrote: > Which is explicitly imposing additional restrictions. Which is > explicitly prohibited in section 6. I don't see any exceptions > relating to what the consequences of those restrictions might be. The RHN AUP simply says that if you redistribute information from RHN you lose access to RHN. It does not restrict your right to redistribute anything; it restricts access to future information distributions from RHN. I know that's splitting hairs, but it does seem to meet the letter of the license. After all, RHN access is not required except for updates; if I really wanted to do so I could redistribute everything I have from RHN at this point in time and upstream has no legal recourse against that distribution that I know of (but I am neither a lawyer nor a paralegal; Russ on the other hand knows of what he speaks....). They can, however, choose to not distribute anything else to me in the future, and nothing in the GPL or any other license used by upstream forces them to distribute anything new to me. And that's the gestalt of the RHN AUP; it states under what conditions RHN will distribute the compiled binary code (treated specially by GPL and not as a derived work) to you, its customer. Once you have received the binary of a particular version you have the right, under GPL and only for GPL-covered packages, to receive the source code for that particular version of that package. Upstream is very gracious (in my opinion, at least) and distributes all of its source, not just GPL source and not just to customers but to the public at large (I say all; I haven't personally verified that all source in any given RHN channel is indeed available publicly on ftp.redhat.com, primarily because I don't have access to all channels). They could distribute only the source that they legally have to under those licenses that require it, but not for the source covered under other licenses that do not require redistribution of source plus modifications. But just because I have version 1.2.3 of a package does not give me a guaranteed right under GPL to get 1.2.4 from them. And just because I can get the source to the 1.2.4 package they distribute does not give me an automatic right to the corresponding binary as the GPL does treat the compiled code specially. If you get the binary, you have the right to the source; if you have the source it is assumed you can generate the binary yourself (as is proven by the various EL rebuilds). The level of difficulty required to generate the binary is not specified or even addressed by the GPL, nor does the GPL guarantee your ability to generate the exact same binary as someone else distributes..... nor is the distributor of the binary restricted at all in how difficult generating their exact binary, or a 100% compatible binary, can be. This seems to be the current holdup with C6.1, in my opinion; you can build *a* binary but will it work just like *the* binary? Upstream can make it even more difficult than they already have (and I know it's currently very frustrating to the CentOS team just from reading this thread!). Russ, is that summary even close to accurate in your opinion? These are the facts of life for an EL rebuild distribution user. If you want a primary access distribution (rather than a secondary rebuild) you need to find one that meets your needs, either by paying up for upstream or by going to something else (and there are really only two suitable enterprise choices for 'something else' in this case (and in my opinion): OpenSuSE or Debian Stable). I'm evaluating Debian Stable on IA64 myself, as Debian Stable is the only actively maintained enterprise-grade distribution (again, in my opinion) freely available for IA64 (yes, upstream's EL5 is still available and is still maintained, but it costs six arms and eight legs to purchase for the machines I have; SLES likewise). And I don't really currently have the time to rebuild C6 for IA64 myself. I'd love to, and I've had conversations with like-minded people, and I don't really want to go to Debian on it since I really want the IA64 boxes to work like all the other servers here which are running upstream EL rebuilds. But I have more important and necessary things to do with my time at the moment than to get into the game of maintaining a private rebuild for IA64 (I say private; even if I had time to maintain the build I don't have time to deal with the 'issues' of a public build!). -- “Don't eat anything you've ever seen advertised on TV” - Michael Pollan, author of "In Defense of Food"

38 145

ip command
by Fajar Priyanto 18 Nov '11

18 Nov '11

Hi all, I have this network: 10.1.20.0 - 10.1.23.0 /22 Broadcast 10.1.23.255 Say I have a machine with IP: 192.168.1.1 Now, I want to create virtual IP on it with ip command: 1. Is this ok? ip addr add 10.1.22.100/22 dev eth0:1 2. Should I define the broadcast too in the above command? If I don't define it, will the above command means the broadcast would be 10.1.25.255? Thank you. Fajar.

4 3

Centos6 - Xfce - howto add usb automount
by Johan Vermeulen 18 Nov '11

18 Nov '11

dear all, I configured Xfce on an Centos6 minimal install, I think its very fast, even on al 512Mb machine. But I don't have any clue how to make a usb automount on this. Anybody can help me with this? greetings, James -- Johan Vermeulen IT-medewerker Caw De Kempen johan.vermeulen(a)cawdekempen.be 0479.82.01.41 Opensource Software is the future.

6 15

← Newer
1
...
4
5
6
7
8
9
10
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2011