Discuss February 2011

discuss@lists.centos.org

267 participants
208 discussions

[OT] building src rpm on RHEL5 using mock https://bugzilla.redhat.com/show_bug.cgi?id=680144
by Jason Pyeron 25 Feb '11

25 Feb '11

Does anyone have experience using mock on RHEL5 with the RHN? I use mock easily on Centos, I get errors like /bin/sh not found, useradd not found build failed? messages from it on RHEL w/ RHN. Any suggestions on where to start looking. -Jason Pyeron -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is copyright PD Inc, subject to license 20080407P00.

3 3

how to optimize CentOS XEN dom0?
by Rudi Ahlers 25 Feb '11

25 Feb '11

Hi, I have a problematic CentOS XEN server and hope someone could point me in the right direction to optimize it a bit. The server runs on a Core2Quad 9300, with 8GB RAM (max motherboard can take, 1U chassis) on an Intel motherboard with a 1TB SATA HDD. dom0 is set to 512MB limit with a few small XEM VM's running: root@zaxen01:[~]$ xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 512 4 r----- 96.5 actionco.vm 3 1519 1 -b---- 14.8 byracers.vm 4 511 1 -b---- 85.7 ns1 5 511 1 -b---- 22.3 picturestravel 6 255 1 -b---- 13.3 rafttheworld 7 255 1 -b---- 11.3 zafepres.vm 8 511 1 -b---- 19.0 the server itself seems to eat up a lot of resources: root@zaxen01:[~]$ free -m total used free shared buffers cached Mem: 512 472 39 0 13 215 -/+ buffers/cache: 244 268 Swap: 4095 0 4095[/CODE] Yet, it only has XEN, Webmin (since it's a CloudMin XEN server), Exim, Apache and a few other services running: root@zaxen01:[~]$ chkconfig --list |grep "3:on" |awk '{print $1}' |sort acpid auditd crond csf dhcpd exim haldaemon httpd iptables iscsi iscsid kudzu lfd lvm2-monitor mdmonitor network qemu restorecond setroubleshoot smartd snmpd sshd syslog sysstat webmin xend xendomains Is there anything I can optimize on such a server? The server runs CentOS 5.5 x64: root@zaxen01:[~]$ cat /etc/redhat-release CentOS release 5.5 (Final) root@zaxen01:[~]$ uname -a Linux zaxen01.softdux.com 2.6.18-194.32.1.el5xen #1 SMP Wed Jan 5 18:44:24 EST 2011 x86_64 x86_64 x86_64 GNU/Linux with Xen version 3.1.2-194.32.1.el5 And there's the xm dmesg output: Xen version 3.1.2-194.32.1.el5 (mockbuild(a)centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) Wed Jan 5 17:43:03 EST 2011 Latest ChangeSet: unavailable (XEN) Command line: dom0_mem=512M (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000008f000 (usable) (XEN) 000000000008f000 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cf53f000 (usable) (XEN) 00000000cf53f000 - 00000000cf54b000 (reserved) (XEN) 00000000cf54b000 - 00000000cf620000 (usable) (XEN) 00000000cf620000 - 00000000cf6e8000 (ACPI NVS) (XEN) 00000000cf6e8000 - 00000000cf6ec000 (usable) (XEN) 00000000cf6ec000 - 00000000cf6f1000 (ACPI data) (XEN) 00000000cf6f1000 - 00000000cf6f2000 (usable) (XEN) 00000000cf6f2000 - 00000000cf6ff000 (ACPI data) (XEN) 00000000cf6ff000 - 00000000cf700000 (usable) (XEN) 00000000cf700000 - 00000000d0000000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000230000000 (usable) (XEN) System RAM: 8181MB (8378020kB) (XEN) Xen heap: 13MB (13720kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #2 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) Processor #3 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2485.797 MHz processor. (XEN) HVM: VMX enabled (XEN) VMX: MSR intercept bitmap enabled (XEN) I/O virtualisation disabled (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 (XEN) Booting processor 1/2 eip 90000 (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 (XEN) Booting processor 2/1 eip 90000 (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 (XEN) Booting processor 3/3 eip 90000 (XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz stepping 07 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer overflows in 2 jiffies. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 4 CPUs (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2f4d70 (XEN) elf_parse_binary: phdr: paddr=0xffffffff804f4d80 memsz=0x14c510 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80642000 memsz=0xc08 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80644000 memsz=0x11be8c (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff8075fe8c (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000 (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_k ernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff8075fe8c (XEN) virt_entry = 0xffffffff80200000 (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff8075fe8c (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000222000000->0000000224000000 (122880 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: -- Kind Regards Rudi Ahlers SoftDux Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

7 10

CentOS 5 Security Updates
by Cal Webster 24 Feb '11

24 Feb '11

Does anyone know the time-frame when security updates might be published for these applications in CentOS 5? wireshark postgresql krb5 java-1.6.0-openjdk java-1.6.0-sun The following security updates have been published upstream (after release of RHEL 5.6) to remedy the vulnerabilities described in their associated CVE reports. Remotely Exploitable: (R) RHSA-2011:0013: Moderate: wireshark security update 1/10/11 [CVE-2010-4538] (R) RHSA-2011:0197: Moderate: postgresql security update 2/3/11 [CVE-2010-4015] (R) RHSA-2011:0199: Important: krb5 security update 2/8/11 [CVE-2011-0281] (R) [CVE-2011-0282] (R) RHSA-2011:0281: Important: java-1.6.0-openjdk security update 2/17/11 CVE-2010-4448 (R) CVE-2010-4450 CVE-2010-4465 (R) CVE-2010-4469 (R) CVE-2010-4470 (R) CVE-2010-4472 (R) RHSA-2011:0282: Critical: java-1.6.0-sun security update 2/17/11 CVE-2010-4422 (R) CVE-2010-4447 (R) CVE-2010-4448 (R) CVE-2010-4450 CVE-2010-4451 (R) CVE-2010-4452 (R) CVE-2010-4454 (R) CVE-2010-4462 (R) CVE-2010-4463 (R) CVE-2010-4465 (R) CVE-2010-4466 (R) CVE-2010-4467 (R) CVE-2010-4468 (R) CVE-2010-4469 (R) CVE-2010-4470 (R) CVE-2010-4471 (R) CVE-2010-4472 (R) CVE-2010-4473 (R) CVE-2010-4475 (R) CVE-2010-4476 (R) I know the development team is furiously working to get 5.6 out the door so I understand that there will be delays. However, it was my understanding that "Critical" security updates and those that are "remotely exploitable" would be pushed out ahead of 5.6. If 5.6 is not forthcoming I think many of us would like to see at least the security updates to cover potential vulnerabilities. Many thanks to the development team for all their hard work! :-) Respectfully, Cal Webster

9 14

Problem with timezone configuration
by John Nash 24 Feb '11

24 Feb '11

Hello, I have a problem configuring the timezone on a CentOS 5.5 server. I would like the timezone to be Europe/Paris. I have followed the steps described here: http://www.wikihow.com/Change-the-Timezone-in-Linux I think I have changed the appropriate configuration files ( /etc/localtime, /etc/sysconfig/clock ), but the output of the ‘date’ command still indicates the timezone is EST. [root@xxx ~]# cat /etc/redhat-release CentOS release 5.5 (Final) [root@s15370074 ~]# ls -l /etc/localtime lrwxrwxrwx 1 root root 32 Feb 19 18:31 /etc/localtime -> /usr/share/zoneinfo/Europe/Paris [root@xxx ~]# cat /etc/sysconfig/clock ZONE="Europe/Paris" UTC=true ARC=false [root@xxx ~]# echo $TZ [root@xxx ~]# [root@xxx ~]# date Sun Feb 20 18:01:28 EST 2011 [root@xxx ~]# rdate -s time.mit.edu [root@xxx ~]# hwclock –systohc [root@xxx ~]# date Sun Feb 20 18:03:34 EST 2011 Note that I have even completely rebooted the server, with no effect. Am I missing something important ? Thank you in advance for your suggestions !

4 3

Re: [CentOS] [OT] Alternative to cPanel
by Trutwin, Joshua 24 Feb '11

24 Feb '11

> > On 02/24/11 12:42 AM, Rudi Ahlers wrote: > > My centos system runs apache and php and postgres, and on top of that > > I'm running drupal, and I'm having some problems with my theme > > template CSS. hey, its on centos, shouldn't I discuss that here? > > Most certainly NOT. > > John, > > Agreed. > The problem is the community around Centos is quite large and we need > sometimes to ask for other's opinion regarding adjacent subjects. Who else > are we going to ask? > We need an offtopic(a)centos.org list. I dunno if Off Topic is really a good name for such a list cause I don't wanna join a list where there's traffic about current events, religion, politics, etc. Tough line to draw though cause I'd certainly be interested in people's opions about other tech topics. misclinux(a)centos.org? I actually posted this question originally to my local LUG (Linux User Group) mailing list last week and received a couple good suggestions and a personal email to try the CentOS lists because that was what the target OS was and likely would be people there who've had experience doing this. Realize it's kind of a grey area, anyway thanks for those that provided pointers. Josh

1 0

OT: non-Windows only training sites
by m.roth＠5-cent.us 24 Feb '11

24 Feb '11

<rant> Required training from my co is from skilport.com. Sometimes, I can use Firefox to view it... but can't get the completion. Yesterday, I launch the training, and a window pops up, and says "loading", and nothing else ever happens. Oh, sorry, when I close the window, it crashes all three windows of FireFox. I'm told for folks with Macs, they have them come to the offices to take it... on WinCrap, of course, with Internet Exploder. </rant> <rant> Oh, almost forgot: I tried clicking on the "web accessability", which is W3C compliant... and go to log in, and it tells me the content isn't W3C compliant, so apparently only the login page is compliant. </rant> So, does anyone know of a company that provides online training for companies - I gather the companies produce the training to go on the site, or at least they customize a boilerplate - that is *not* IE only? I'd really like to throw that at the person in charge (who I've actually had a good conversation with a few months ago). mark

1 0

OT: Ecommerce hosting
by Thomas Dukes 24 Feb '11

24 Feb '11

Would appreciate some suggestions for ecommerce hosting. Been using, cough, cough, godaddy, for about 5 or 6 yrs but in the last year or so, they really suck. Did the hosting myself for a while prior to going with godaddy but I don't have time to babysit. Seems godaddy would rather spend millions advertising during the Super Bowl than put that money to good use. TIA!!

7 8

[CentOS] http://www.securityweek.com/high-severity-bind-vulnerability-advisory-issued
by Larry Vaden 24 Feb '11

24 Feb '11

US-CERT encourages users and administrators using the affected versions of BIND to upgrade to BIND 9.7.3. Optionally, one can wait on a backport.

15 20

LVM problem after adding new (md) PV
by Tomasz Nowak 24 Feb '11

24 Feb '11

Hello, I have a weird problem after adding new PV do LMV volume group. It seems the error comes out only during boot time. Please read the story. I have couple of 1U machines. They all have two, four or more Fujitsu-Siemens SAS 2,5" disks, which are bounded in Raid1 pairs with Linux mdadm. First pair of disks has always two arrays (md0, md1). Small md0 is used for booting and the rest - md1 is used as PV for volume group (vg0). When I need to enlarge the volume, I just add 2 new disks, create a raid 1 array of their whole space I add it as another mdX to vg0. That has been working fine since yesterday. I received new disks branded by Toshiba (Toshiba bought Fujitsu-Simens hdd business) which were supposed to be added as disk no 3 and 4. As far as I remember I've done everything in the same way as before: - They come out as sdc and sdd, so I - fdisk /dev/sdc, created one primary parition of whole space, type fd - the same with /dev/sdd - mdadm --create /dev/md2 -R -l 1 -n 2 /dev/sdc1 /dev/sdd1 - array has been created and syncronized - pvcreate /dev/md2 - vgextend vg0 /dev/md2 and it looks fine: ---------------------------------------------------------------------- # cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sdb2[1] sda2[0] 140488320 blocks [2/2] [UU] md2 : active raid1 sdd1[1] sdc1[0] 292961216 blocks [2/2] [UU] md0 : active raid1 sdb1[1] sda1[0] 3148608 blocks [2/2] [UU] ---------------------------------------------------------------------- # pvdisplay --- Physical volume --- PV Name /dev/md1 VG Name vg0 PV Size 133.98 GB / not usable 11.62 MB Allocatable yes PE Size (KByte) 32768 Total PE 4287 Free PE 1695 Allocated PE 2592 PV UUID AufZRm-QbFC-xRj1-OxwW-Z2w2-qbkM-qzoEcP --- Physical volume --- PV Name /dev/md2 VG Name vg0 PV Size 279.39 GB / not usable 14.94 MB Allocatable yes PE Size (KByte) 32768 Total PE 8940 Free PE 8940 Allocated PE 0 PV UUID qeDW2q-nq5b-Yh5U-5sKY-7Rkd-1UXh-LAxL8j ---------------------------------------------------------------------- # vgdisplay --- Volume group --- VG Name vg0 System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 1010 VG Access read/write VG Status resizable MAX LV 0 Cur LV 8 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 413.34 GB PE Size 32.00 MB Total PE 13227 Alloc PE / Size 2592 / 81.00 GB Free PE / Size 10635 / 332.34 GB VG UUID 5cF1dk-1CMM-qiuf-CyNY-aCmw-8Hx8-4iO12I ---------------------------------------------------------------------- # lvdisplay --- Logical volume --- LV Name /dev/vg0/d0v VG Name vg0 LV UUID q7zmrV-EykH-jPzR-smYJ-eehh-3Gbx-ebu5wK LV Write Access read/write LV Status available # open 1 LV Size 3.00 GB Current LE 96 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [...] this part may be skiped as it's very long an irrelevant. There are no errors here. ---------------------------------------------------------------------- And now please take a look what happens during boot: [...] scsi0 : ioc0: LSISAS1078 C2, FwRev=01180400h, Ports=1, MaxQ=276, IRQ=20 mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 0, sas_addr 0x500000e01f975022 Vendor: FUJITSU Model: MBB2147RC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 287277984 512-byte hdwr sectors (147086 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 287277984 512-byte hdwr sectors (147086 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 1, sas_addr 0x500000e01f602f42 Vendor: FUJITSU Model: MBB2147RC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 287277984 512-byte hdwr sectors (147086 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back SCSI device sdb: 287277984 512-byte hdwr sectors (147086 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 0:0:1:0: Attached scsi disk sdb mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 2, sas_addr 0x50000392b8028856 Vendor: TOSHIBA Model: MBF2300RC Rev: 0107 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 585937500 512-byte hdwr sectors (300000 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back SCSI device sdc: 585937500 512-byte hdwr sectors (300000 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write back sdc: sdc1 sd 0:0:2:0: Attached scsi disk sdc mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 3, sas_addr 0x50000392b80236da Vendor: TOSHIBA Model: MBF2300RC Rev: 0107 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 585937500 512-byte hdwr sectors (300000 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write back SCSI device sdd: 585937500 512-byte hdwr sectors (300000 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write back sdd: sdd1 sd 0:0:3:0: Attached scsi disk sdd Loading shpchp.ko module shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Loading libata.ko module Loading ata_piix.ko module GSI 23 sharing vector 0x41 and IRQ 23 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 23 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] scsi1 : ata_piix scsi2 : ata_piix ata1: SATA max UDMA/133 cmd 0x3138 ctl 0x314c bmdma 0x3110 irq 23 ata2: SATA max UDMA/133 cmd 0x3130 ctl 0x3148 bmdma 0x3118 irq 23 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) GSI 24 sharing vector 0x49 and IRQ 24 ACPI: PCI Interrupt 0000:00:1f.5[D] -> GSI 21 (level, low) -> IRQ 24 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] scsi3 : ata_piix scsi4 : ata_piix ata3: SATA max UDMA/133 cmd 0x3128 ctl 0x3144 bmdma 0x30f0 irq 24 ata4: SATA max UDMA/133 cmd 0x3120 ctl 0x3140 bmdma 0x30f8 irq 24 ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) Loading usb-storage.ko module Initializing USB Mass Storage driver... scsi5 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage Waiting for driver initialization. USB Mass Storage support registered. Vendor: TEAC Model: DV-28S-V Rev: 1.0B Type: CD-ROM ANSI SCSI revision: 00 Loading dm-mod.ko module device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel(a)redhat.com Loading dm-log.ko module Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Loading dm-mem-cache.ko module Loading dm-region_hash.ko module Loading dm-message.ko module Loading dm-raid45.ko module device-mapper: dm-raid45: initialized v0.2594l Waiting for driver initialization. Scanning and configuring dmraid supported devices md: Autodetecting RAID arrays. md: autorun ... md: considering sdd1 ... md: adding sdd1 ... md: adding sdc1 ... md: sdb2 has different UUID to sdd1 md: sdb1 has different UUID to sdd1 md: sda2 has different UUID to sdd1 md: sda1 has different UUID to sdd1 md: created md2 md: bind<sdc1> md: bind<sdd1> md: running: <sdd1><sdc1> raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind<sda2> md: bind<sdb2> md: running: <sdb2><sda2> raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind<sda1> md: bind<sdb1> md: running: <sdb1><sda1> raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ------------------------ and come the problem ----------------------- Scanning logical volumes Reading all physical volumes. This may take a while... Couldn't find device with uuid qeDW2q-nq5b-Yh5U-5sKY-7Rkd-1UXh-LAxL8j. Found volume group "vg0" using metadata type lvm2 Activating logical volumes Couldn't find device with uuid qeDW2q-nq5b-Yh5U-5sKY-7Rkd-1UXh-LAxL8j. 8 logical volume(s) in volume group "vg0" now active Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys SELinux: Disabled at runtime. type=1404 audit(1298476404.427:2): selinux=0 auid=4294967295 ses=4294967295 INIT: version 2.86 booting Welcome to CentOS release 5.5 (Final) Press 'I' to enter interactive startup. Setting clock (utc): Wed Feb 23 16:53:25 CET 2011 [ OK ] Starting udev: [ OK ] Loading default keymap (us): [ OK ] Setting hostname xen13.local: [ OK ] Setting up Logical Volume Management: 8 logical volume(s) in volume group "vg0" now active [...] I have no idea were the problem is. I could paste vgck result here but its long, is it nessesary? I have yet another machine with the same setup and the same new Toshiba disks and it shows even some more errors: Scanning logical volumes Reading all physical volumes. This may take a while... Couldn't find device with uuid fNeN0H-zeD1-ems8-TfqW-2pyC-ZBdR-3ni250. Found volume group "vg0" using metadata type lvm2 Activating logical volumes Couldn't find device with uuid fNeN0H-zeD1-ems8-TfqW-2pyC-ZBdR-3ni250. Refusing activation of partial LV d1dc. Use --partial to override. 6 logical volume(s) in volume group "vg0" now active [...] but then later: [...] Setting up Logical Volume Management: 7 logical volume(s) in volume group "vg0" now active and after boot all 7 logical volumes work fine. Where could be the problem with these errors? -- Tomasz

2 3

ls returns file doesn't exist, find finds it??
by neubyr 24 Feb '11

24 Feb '11

Howdy, I am getting some errors with find and ls command - such that find is able to see a file whereas ls says the file doesn't exist. Initially I was trying find and ls together as: # find ./ -type f -mtime +15 | xargs ls Similar behavior is seen even when I execute both commands separately. Any thoughts on what might be wrong here? -- thanks, neubyr

8 8

← Newer
1
2
3
4
5
6
7
8
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss February 2011