Discuss March 2011

discuss@lists.centos.org

286 participants
250 discussions

Re: [CentOS] Which file system to use for a USB backup
by Earl Ramirez 13 Mar '11

13 Mar '11

For Mac he can use fuse for mac or NTFS-3G for Mac, that will give you the ability to write to ntfs drives on a Mac. http://www.macupdate.com/app/mac/23729/macfuse I use NTFS-3G for Mac and it works fine. http://sourceforge.net/projects/fuse-for-macosx/ On Sun, Mar 13, 2011 at 12:16 PM, Kenneth Porter <shiva(a)sewingwitch.com>wrote: > --On Wednesday, March 09, 2011 2:56 PM -0800 Todd Cary > <todd(a)aristesoftware.com> wrote: > > > I have some photographs on my Centos 4 server that I want to copy > > to a USB drive. However, I want to be able to access the files > > from Windows or Mac OS's. Where should I look for instructions > > on how to mount and format the USB drive and is FAT32 the only > > option? > > I don't know about Mac, but you could set up NTFS with Fuse on CentOS to > allow you to format and mount it as an NTFS filesystem. > > You could also format as ext3 and install a filesystem driver on Windows to > understand ext3. > > <http://www.fs-driver.org/> > > Since the Mac is BSD-based, it might even understand ext3. There's this > project: > > <http://ext2fsx.sourceforge.net/> > > I haven't used these, as I haven't needed to export files to another OS > this way. > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > -- Kind Regards Earl Ramirez

1 0

Mumble gamers' VOIP server (murmur)
by Kenneth Porter 13 Mar '11

13 Mar '11

I was unable to build the whole Mumble system on CentOS but it's available for Fedora Development. I just wanted the server part on my headless server, and a static build is available from the Mumble project on Sourceforge. So I grabbed the Mumble SRPM from Fedora Development, the static build from Sourceforge, and stripped the spec file down to the minimum needed to just install the static-build server. You'll find the result here: <http://sewingwitch.com/ken/Stuff/murmur-1.2.3-11.kp.src.rpm> If you're paranoid (a good admin should be), just unpack to use the spec file and grab the sources from Fedora Development and Sourceforge and overwrite those included in the SRPM before building.

1 1

Which file system to use for a USB backup
by Todd Cary 13 Mar '11

13 Mar '11

I have some photographs on my Centos 4 server that I want to copy to a USB drive. However, I want to be able to access the files from Windows or Mac OS's. Where should I look for instructions on how to mount and format the USB drive and is FAT32 the only option? Many thanks -- Ariste Software Petaluma, CA 94952 http://www.aristesoftware.com

5 6

Alternatives to apache for php based servers: Nginx
by robert mena 12 Mar '11

12 Mar '11

Hi, Anyone here using Nginx as alternative to apache in conjunction to php scripts? Care to share thoughts and caveats? I am reading that it is a good alternative but do not know the real life limitations, diferences to apache, which repo to fetch etc.

6 5

try with succes rpm bind 9.7.3 with koji el4 and el5
by fakessh ＠ 12 Mar '11

12 Mar '11

rehello centos list after some modifications rpm fedora core 14 of bind-9.7.3 and patching. diff -u unpatched/configure.in patched/configure.in --- unpatched/configure.in 2010-07-05 14:02:20.000000000 +0200 +++ patched/configure.in 2010-07-05 14:03:48.000000000 +0200 @@ -282,7 +282,8 @@ AC_C_INLINE AC_C_VOLATILE AC_CHECK_FUNC(sysctlbyname, AC_DEFINE(HAVE_SYSCTLBYNAME)) -AC_C_FLEXIBLE_ARRAY_MEMBER +# RvR: this breaks things on RHEL5 +#AC_C_FLEXIBLE_ARRAY_MEMBER I managed to compile on EL4 and EL5 koji result http://koji.fedoraproject.org/koji/taskinfo?taskID=2907187 http://koji.fedoraproject.org/koji/taskinfo?taskID=2907203 -- gpg --keyserver pgp.mit.edu --recv-key 092164A7 http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7

1 0

What iSCSI is used in Centos 5 and RHEL6?
by Emmanuel Noobadmin 12 Mar '11

12 Mar '11

I was looking up on iSCSI in preparation and became aware that there are different iSCSI software/drivers/whatever-is-the-correct-term available. e.g. IET http://iscsitarget.sourceforge.net/ SCST http://scst.sourceforge.net/ STGT http://stgt.berlios.de/ LIO http://linux-iscsi.org/ Based on what I can see, it seems to be STGT because the site provides a link to Redhat advisory which seems to imply that it's what's being used in RHEL. Does anybody know for sure?

2 2

Re: [CentOS] CentOS MD RAID 1 on Openfiler iSCSI
by Emmanuel Noobadmin 12 Mar '11

12 Mar '11

On 3/2/11, Rudi Ahlers <Rudi(a)softdux.com> wrote: > I'm very interested to find out what happened with this project and > what you ended up doing? There were delays after changes after delays for that project that was meant to run on the VM setup. Spent more time hacking temporary solutions to their problems with NAS and such. So I haven't actually got this done. But if you can wait, I could probably answer you in about 4 weeks... when the hardware and fibre connectivity for the client's server room comes in.

1 0

Re: [CentOS] Race condition with mdadm at boot [still mystifying]
by Chuck Munro 12 Mar '11

12 Mar '11

On 03/11/2011 09:00 AM, Les Mikesell wrote: > > On 3/10/11 9:25 PM, Chuck Munro wrote: > >> > However, on close examination of dmesg, I found something very >> > interesting. There were missing 'bind<sd??>' statements for one or the >> > other hot spare drive (or sometimes both). These drives are connected >> > to the last PHYs in each SATA controller ... in other words they are the >> > last devices probed by the driver for a particular controller. It would >> > appear that the drivers are bailing out before managing to enumerate all >> > of the partitions on the last drive in a group, and missing partitions >> > occur quite randomly. >> > >> > So it may or may not be a timing issue between the WD Caviar Black >> > drives and both the LSI and Marvell SAS/SATA controller chips. > I've seen some weirdness in powering up 6 or more SATA drives but never > completely pinned down whether it was the controller, drive cage, or particular > drives causing the problem. But I think my symptom was completely failing to > detect some drives when certain combinations of disks were installed although > each would work individually. Do you have any options about whether they power > up immediately or wait until accessed? > That's a good question, one I have experimented with. I don't have any choice as to when the drives are spun up (only on bootup), but I did try a controller card which pre-spun and checked the identification of the drives before handing off to the BIOS for bootup. That didn't help. On the particular Supermicro motherboard I'm using, there is a very long delay (10 or 15 sec) between power-on and initiation of visible BIOS activity, so all disk drives have ample time to spin up and stabilize. The drives' SMART data shows that the average spin-up time is well within the BIOS startup delay. Each drive activity indicator shows that they are always probed by the kernel's scsi scan process. I have since tried a couple of other tricks I found by Googling around ... setting the kernel parameters 'rootdelay=xx' and 'scsi_mod.scan=sync'. These had no effect on the problem. For some unfathomable reason, the last drives in each group of drives have one or more random partitions missing, with no 'bind' statement in dmesg. Other partitions on those drives are bound normally. This has been tested with at least two known-good replacement drives, with the same random results. On two occasions today, everything worked perfectly, but that was unusual. A friend of mine suggested an ugly hack - connect two 'dummy' unused old SATA drives to the last port of each controller (I'm using only 6 of 8 on each). I wonder if one of those $15 IDE-to-SATA converters would do the job (without a drive attached)? Foolish thought :-/ Chuck

2 1

screen saver unlock dialog window is not visible in clone mode
by DarkKnight BrightWarrior 12 Mar '11

12 Mar '11

Hi, Environment: I am using CentOS 5.3 operating system. I upgraded xorg of centos to 7.3. I am using intel 945 GM board. My xorg server version is 1.4.2 and inetl driver version 2.4.3. gnome-screensaver version is 2.16.1-8.el5. Problem: I connected another system of same hardware using VGA output. Now I can see clone of my system on secondary display. I enabled screensaver with 1 minute period and also enabled locking feature using gnome-screensaver-preferences. After 1 minute screensaver appeared on both primary and secondary displays. But when I move mouse or press any key, Screen saver unlock dialog is not appearing. But when I type password, I am able to comeout of screensaver. So Screensver unlock dialog is there but it is not visible. When I remove secondary display, I mean when I am in single display mode screen saver unlock dialog is visible and working fine. So what could be the problem that causing screensaver unlock dialog window to appear/visible in clone/extended monitor mode. Please help. Thanks

2 1

Re: [CentOS] Server locking up everyday around 3:30 AM
by m.roth＠5-cent.us 12 Mar '11

12 Mar '11

PJ wrote: > On Fri, Mar 11, 2011 at 11:05 AM, Steve Thompson <smt(a)vgersoft.com> wrote: >> >>> PJ wrote: >>>> Mar 8 03:33:18 web1 kernel: INFO: task wget:13608 blocked for more than 120 seconds. <snip> > Great replies from everyone, I really appreciate the feedback. > > Interesting entries in /var/log/cron: <snip> > Mar 11 03:01:01 web1 crond[13613]: (root) CMD (run-parts /etc/cron.hourly) Mar 11 03:07:20 web1 crond[13727]: (webuser) error: Job execution of per-minute job scheduled for 03:05 delayed into subsequent minute 03:07. Skipping job run. > Mar 11 03:07:20 web1 crond[13727]: CRON (webuser) ERROR: cannot set security context <snip> SELINUX! Look at /var/log/messages for an selinux error: if you don't have sealert, install the package, then use it on /var/log/audit. Or put selinux in permissive mode. mark

2 3

← Newer
1
...
12
13
14
15
16
17
18
...
25
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2011