Discuss April 2011

discuss@lists.centos.org

312 participants
282 discussions

Usb surf stick for internet
by Olaf Mueller 11 Apr '11

11 Apr '11

Hello, I am searching for an internet usb surf-stick (umts) that works under CentOS. Is anyone using such a stick and if so, which chip has this usb-stick? Would a Huawei E160E chip work under CentOS? Or maybe under CentOS with the 2.6.35 kernel from elrepo? Thank you very much! regards Olaf

4 4

Re: [CentOS] 5.6 update experience - EXCELLENT!
by Michel van Deventer 11 Apr '11

11 Apr '11

>> >>Just updated 98 packages on this ole hardware raid 10 box - 5.6 final is >>running just fine. No problems. THANKS. > > Topping that; 175 packages dropped in on my test-machine at work. 8-) > Feels like > I'm getting spoiled with updates like this that "just work". ;*) > > So far, so good. Great work CentOS-team/devs! Thanks from Uppsala/Sweden! Yesterday I updated my 10 Xen/KVM VM's at home and the three VPS'es I have. No issues whatsoever :) !!! GREAT WORK CentOS team ! The update was worth the wait :) Regards, Michel

1 0

compiling xvnc
by Michel Donais 11 Apr '11

11 Apr '11

Just new to Centos 5.6. I'm trying to install an Xvnc server Downloaded tightvnc-1.3.10_unixsrc.bz2 I made thru configure but when I make I get these messages make[3]: Leaving directory `/home/michel/importe/tightvnc-1.3.10_unixsrc/vnc_unixsrc/Xvnc/programs/Xserver/hw/vnc' make[2]: *** No rule to make target `../.././/../libvncauth/libvncauth.a', needed by `Xvnc'. Stop. make[2]: Leaving directory `/home/michel/importe/tightvnc-1.3.10_unixsrc/vnc_unixsrc/Xvnc/programs/Xserver' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/michel/importe/tightvnc-1.3.10_unixsrc/vnc_unixsrc/Xvnc/programs' make: *** [all] Error 2 I'm not used to build application,. so I don't understand or don't know where to find the missing rule Can somebody point me a solution? --- Michel Donais

3 3

the mighty Karanbir Singh and centos team
by compdoc 11 Apr '11

11 Apr '11

You and your crew slowed down the internet last night with all the 5.6 downloads. Congrats!

5 5

new kernel = no working sound
by Iulian L Dragomir 10 Apr '11

10 Apr '11

After updating my laptop ( compaq 6820s) to Centos 5.6 the sound is gone. The sound card is still detected but there is no sound from speaker Vendor: Intel Corporation Model: 82810H (ICH8 Family) HD Audio Controller Module: snd-hda-intel On the same updated laptop the sound is working fine with an older kernel ( 2.6.18-194.32.1.el5.centos.plus ) I tried with no success ( sound related ) booting all of the following: kernel#2.6.18-238.el5 kernel#2.6.18-238.el5.centos.plus kernel#2.6.18-238.1.1.el5 kernel#2.6.18-238.1.1.el5.centos.plus kernel#2.6.18-238.5.1.el5 kernel#2.6.18-238.5.1.el5.centos.plus This is a nonworking scsconfig.log: http://pastebin.com/XW9e72Jj The sound is working fine with the following kernels: kernel#2.6.18-194.26.1.el5.centos.plus kernel#2.6.18-194.32.1.el5.centos.plus and all the older This is a working scsconfig.log: http://pastebin.com/xqdMra5q Centos was installed on this laptop in 2007 and everything worked ok till now. Googling around produced some results but none of them have a working solution This email is my second email to the list on the same subject. The first email is probably stuck in lalaland due to my poor judgment and due to the logs attached. Please excuse me if both of them reach you. Can anyone suggest a solution or a path to follow ? Thanks in advance, Iulian L. Dragomir

2 6

Centos 5.6 and httpd
by Gregory P. Ennis 10 Apr '11

10 Apr '11

A problem with httpd on 5.6 I have three Centos machines that were automatically upgraded from 5.5. to 5.6. Everything appears to be running perfect except httpd had stopped delivering web service on all three machines. I did a cursive look to see if there had been a reported bug and found : http://bugs.centos.org/view.php?id=4796 When I changed : chown root.apache /etc/httpd/alias/*.db chmod 0640 /etc/httpd/alias/*.db The problem was fixed on all three machines. Greg Ennis

3 2

Re: [CentOS] 5.6 - SRPM's
by Tom Diehl 10 Apr '11

10 Apr '11

Hi, On Sun, 10 Apr 2011, Kai Schaetzl wrote: > Ljubomir Ljubojevic wrote on Sun, 10 Apr 2011 12:53:54 +0200: > >> Just to be sure there is no misunderstanding. I add that line in any >> *.repo file in /etc/yum.repos.d/ folder, as an option for every >> repository definition in those files where repository has "releases" rpms. > > I don't understand the problem. If you edit a .repo file it is usually not > overwritten, the new repo file is saved as .rpmnew. So, I think this creates > only a problem in the case that you completely remove a .repo file. > What am I misunderstanding? (Sorry for the pun, I think I'm mostly talking > to Tom ;-) I cannot speak for the other Tom but in my case I rebuild the centos-release rpm and add my own repo files so that all of my machines pull from my local repos. Yes, I know that the modified repo files do not get overwritten but that does not help for new machines nor does it help when I change my local configuration. When I rebuild the centos-release rpm I actually modify it so that a new version of the rpm overwrites any existing .repo files. That way I know all of the machines under my control are only pulling updates I have approved and placed into my local repos. It would be nice if this srpm was released with the main distro. Rebuilding other packages can come later when all of the srpms are available but this particular package is important for me being able to update the machines. In fact I usually end up hacking up the first cut of the centos-release rpm for a new release based on the previous version (in this case 5.5) so that I can do my upgrades. It is not all that hard to do but it would be easier if I had the official srpm. Regards, -- Tom Diehl

3 2

Re: [CentOS] A round of applause!
by aly.khimji＠gmail.com 10 Apr '11

10 Apr '11

Yes, well put, I second that! Thanks to all dev's. As I said earlier on the release date, all your efforts are greatly appreciated Aly ------Original Message------ From: Chuck Munro Sender: centos-bounces(a)centos.org To: CentOS Mailing List ReplyTo: CentOS mailing list Subject: [CentOS] A round of applause! Sent: Apr 10, 2011 12:39 PM Hello All, Just a short note to add my vote for a HUGE round of applause to the CentOS team for their untiring efforts in getting releases out the door. I've just upgraded several servers to 5.6 and it all "just works". None of the team's work is easy to accomplish, especially when less-than-useful complaints keep popping up from thoughtless users who don't appreciate the effort, and who waste the team's time trying to respond. RedHat's move to defend their support business against the freeloading distro vendors (we all know who those sharks are!) wasn't aimed at CentOS, but it has significantly increased the workload the team faces. Let's be patient and let them get the job done. Kudos to the CentOS team! Chuck _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Sent from my BlackBerry device on the Rogers Wireless Network

1 0

iscsi-initiator-utils required in 5.6, loads uneeded modules
by Stephen Harris 10 Apr '11

10 Apr '11

I just updated one of my virtual hosts to 5.6 and on rebooted I spotted an error about iscsi. Which surprised me, since I don't use iscsi. Yet there it is... % rpm -qf /etc/init.d/iscsi iscsi-initiator-utils-6.2.0.872-6.el5 And they're configured to start iscsi 0:off 1:off 2:off 3:on 4:on 5:on 6:off iscsid 0:off 1:off 2:off 3:on 4:on 5:on 6:off And I can't remove it % rpm -e iscsi-initiator-utils error: Failed dependencies: iscsi-initiator-utils is needed by (installed) mkinitrd-5.1.19.6-68.el5.i386 A physical machine still on 5.5 doesn't have iscsi % rpm -qa '*iscsi*' % ls /etc/init.d/*iscsi* /bin/ls: /etc/init.d/*iscsi*: No such file or directory It appears that yum did, indeed, install this: % grep iscsi /var/log/yum.log Apr 10 09:24:30 Installed: iscsi-initiator-utils-6.2.0.872-6.el5.i386 The "fix" is to chkconfig off the iscsi and iscsid rc scripts. This is a good idea, 'cos these scripts modprobe unnecessary modules. -- rgds Stephen

2 2

how to install CentOS 5.6 i386 from livecd? Really dumb question I know :-)
by Kenneth Wolcott 10 Apr '11

10 Apr '11

how to install CentOS 5.6 i386 from livecd? Really dumb question I know :-) Hmm I know iI've done this in earlier releases on CentOS... Please point me to the right place in the wiki or faq to shame me... Thanks, Ken Wolcott

2 1

← Newer
1
...
17
18
19
20
21
22
23
...
29
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss April 2011