Hello,
since weeks I was ignoring this warning at my CentOS 5.6/64 bit machine -
/etc/cron.weekly/99-raid-check:
WARNING: mismatch_cnt is not 0 on /dev/md0
in the hope that the software RAID will slowly repair itself.
I also had executed "echo 100000 > /proc/sys/dev/raid/speed_limit_max"
on the advice from the mailing list.
But now my web server is offline - I had to boot it remotely with rescue system.
Does anybody please have an advice what commands to run
and do you think it is a RAID problem at all?
# dmesg
Linux version 2.6.34 (root@imagemaster30) (gcc version 4.3.2 (Debian
4.3.2-1.1) ) #20 SMP Mon Jul 19 18:35:15 CEST 2010
Command line: ramdisk_size=81920 initrd=rescue-image-2.6-64
root=/dev/ram BOOT_IMAGE=rescue-kernel-2.6-64
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ddfb0000 (usable)
BIOS-e820: 00000000ddfb0000 - 00000000ddfbe000 (ACPI data)
BIOS-e820: 00000000ddfbe000 - 00000000ddfe0000 (ACPI NVS)
BIOS-e820: 00000000ddfe0000 - 00000000ddfee000 (reserved)
BIOS-e820: 00000000ddff0000 - 00000000de000000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xddfb0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000ddfb0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00dde00000 page 2M
00dde00000 - 00ddfb0000 page 4k
kernel direct mapping tables up to ddfb0000 @ 12000-15000
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ 14000-16000
RAMDISK: 7d792000 - 80000000
ACPI: RSDP 00000000000faf80 00014 (v00 ACPIAM)
ACPI: RSDT 00000000ddfb0000 0003C (v01 032510 RSDT1503 20100325 MSFT 00000097)
ACPI: FACP 00000000ddfb0200 00084 (v02 032510 FACP1503 20100325 MSFT 00000097)
ACPI: DSDT 00000000ddfb0440 0447E (v01 A96B3 A96B3210 00000210 INTL 20051117)
ACPI: FACS 00000000ddfbe000 00040
ACPI: APIC 00000000ddfb0390 0006C (v01 032510 APIC1503 20100325 MSFT 00000097)
ACPI: MCFG 00000000ddfb0400 0003C (v01 032510 OEMMCFG 20100325 MSFT 00000097)
ACPI: OEMB 00000000ddfbe040 00071 (v01 032510 OEMB1503 20100325 MSFT 00000097)
ACPI: HPET 00000000ddfb48c0 00038 (v01 032510 OEMHPET 20100325 MSFT 00000097)
ACPI: SSDT 00000000ddfb4900 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Initmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [0000000100000000 - 0000000100004fff]
[ffffea0000000000-ffffea0003ffffff] PMD ->
[ffff880100200000-ffff880103bfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000ddfb0
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1040191
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 890856 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [15000 - 157ff]
Allocating PCI resources starting at de000000 (gap: de000000:21700000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75304 r8192 d23000 u524288
pcpu-alloc: s75304 r8192 d23000 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1024063
Policy zone: Normal
Kernel command line: ramdisk_size=81920 initrd=rescue-image-2.6-64
root=/dev/ram BOOT_IMAGE=rescue-kernel-2.6-64
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 449c000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
Subtract (54 early reservations)
#1 [0001000000 - 00017a7914] TEXT DATA BSS
#2 [007d792000 - 0080000000] RAMDISK
#3 [00017a8000 - 00017a8175] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009ec00 - 00000e3e10] BIOS reserved
#7 [00000e3f7c - 00000ff780] BIOS reserved
#8 [00000e3e10 - 00000e3f7c] MP-table mpc
#9 [0000010000 - 0000012000] TRAMPOLINE
#10 [0000012000 - 0000014000] PGTABLE
#11 [0000014000 - 0000015000] PGTABLE
#12 [0100000000 - 0100005000] NODE_DATA
#13 [00017a8180 - 00017a9180] BOOTMEM
#14 [00017a7940 - 00017a7c40] BOOTMEM
#15 [0100005000 - 0100006000] BOOTMEM
#16 [0100006000 - 0100007000] BOOTMEM
#17 [0100200000 - 0103c00000] MEMMAP 0
#18 [00017a7c40 - 00017a7dc0] BOOTMEM
#19 [00017a9180 - 00017c1180] BOOTMEM
#20 [00017c1180 - 00017c4180] BOOTMEM
#21 [00017c5000 - 00017c6000] BOOTMEM
#22 [00017a7dc0 - 00017a7e01] BOOTMEM
#23 [00017a7e40 - 00017a7e83] BOOTMEM
#24 [00017c4180 - 00017c43e8] BOOTMEM
#25 [00017a7ec0 - 00017a7f28] BOOTMEM
#26 [00017a7f40 - 00017a7fa8] BOOTMEM
#27 [00017c4400 - 00017c4468] BOOTMEM
#28 [00017c4480 - 00017c44e8] BOOTMEM
#29 [00017c4500 - 00017c4568] BOOTMEM
#30 [00017c4580 - 00017c45e8] BOOTMEM
#31 [00017c4600 - 00017c4668] BOOTMEM
#32 [00017c4680 - 00017c46e8] BOOTMEM
#33 [00017c4700 - 00017c4768] BOOTMEM
#34 [00017c4780 - 00017c47e8] BOOTMEM
#35 [00017c4800 - 00017c485d] BOOTMEM
#36 [00017c4880 - 00017c48dd] BOOTMEM
#37 [0001800000 - 000181a000] BOOTMEM
#38 [0001880000 - 000189a000] BOOTMEM
#39 [0001900000 - 000191a000] BOOTMEM
#40 [0001980000 - 000199a000] BOOTMEM
#41 [00017a7fc0 - 00017a7fc8] BOOTMEM
#42 [00017c4900 - 00017c4908] BOOTMEM
#43 [00017c4940 - 00017c4950] BOOTMEM
#44 [00017c4980 - 00017c49a0] BOOTMEM
#45 [00017c49c0 - 00017c4af0] BOOTMEM
#46 [00017c4b00 - 00017c4b50] BOOTMEM
#47 [00017c4b80 - 00017c4bd0] BOOTMEM
#48 [00017c6000 - 00017ce000] BOOTMEM
#49 [0020000000 - 0024000000] BOOTMEM
#50 [000199a000 - 000599a000] BOOTMEM
#51 [00017ce000 - 00017ee000] BOOTMEM
#52 [000181a000 - 000185a000] BOOTMEM
#53 [0000015800 - 000001d800] BOOTMEM
Memory: 3920020k/4718592k available (4511k kernel code, 557828k
absent, 240744k reserved, 2194k data, 636k init)
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using HPET reference calibration
Detected 2500.084 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5000.16 BogoMIPS (lpj=10000324)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Freeing SMP alternatives: 52k freed
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Quad-Core AMD Opteron(tm) Processor 1381 stepping 02
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (20000.75 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [e0000000, efffffff]
node 0 link 0: mmio [fc000000, fdfeffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [fdff0000, ffffffff]
TOM2: 0000000120000000 aka 4608M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xf0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0x120000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
ACPI Warning: Incorrect checksum in table [OEMB] - 00, should be FD
(20100121/tbutils-314)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xde000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:12.0: reg 10: [io 0xb000-0xb007]
pci 0000:00:12.0: reg 14: [io 0xa000-0xa003]
pci 0000:00:12.0: reg 18: [io 0x9000-0x9007]
pci 0000:00:12.0: reg 1c: [io 0x8000-0x8003]
pci 0000:00:12.0: reg 20: [io 0x7000-0x700f]
pci 0000:00:12.0: reg 24: [mem 0xfe7ff800-0xfe7ffbff]
pci 0000:00:12.0: set SATA to AHCI mode
pci 0000:00:13.0: reg 10: [mem 0xfe7fe000-0xfe7fefff]
pci 0000:00:13.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff]
pci 0000:00:13.2: reg 10: [mem 0xfe7fc000-0xfe7fcfff]
pci 0000:00:13.3: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
pci 0000:00:13.4: reg 10: [mem 0xfe7fa000-0xfe7fafff]
pci 0000:00:13.5: reg 10: [mem 0xfe7ff000-0xfe7ff0ff]
pci 0000:00:13.5: supports D1 D2
pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.5: PME# disabled
pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
pci 0000:00:14.0: reg 14: [mem 0x8000a010-0x8000a01f 64bit]
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
pci 0000:01:05.0: reg 10: [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit]
pci 0000:01:05.0: reg 20: [io 0xc000-0xc0ff]
pci 0000:01:05.0: reg 24: [mem 0xfe800000-0xfe8fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xfeae0000-0xfeafffff]
pci 0000:02:00.0: reg 18: [io 0xd800-0xd81f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xfebe0000-0xfebfffff]
pci 0000:03:00.0: reg 18: [io 0xe800-0xe81f]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xde000000-0xdfffffff]
(subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff]
(subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:14.0: no compatible bridge window for [mem
0x8000a010-0x8000a01f 64bit]
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 00000000ddfb0000 - 00000000dfffffff
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0800-0x089f] has been reserved
system 00:09: [io 0x0b10-0x0b1f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:0b: [io 0x0a00-0x0a0f] has been reserved
system 00:0b: [io 0x0a10-0x0a1f] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xddffffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:14.0: BAR 1: assigned [mem 0xde000000-0xde00000f 64bit]
pci 0000:00:14.0: BAR 1: error updating (0xde000004 != 0x8000a014)
pci 0000:00:14.0: BAR 1: set to [mem 0xde000000-0xde00000f 64bit] (PCI
address [0xde000000-0xde00000f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:05.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xde000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xde000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41400k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
HugeTLB registered 2 MB page size, pre-allocated 0 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de)
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.13)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, large block/inode numbers, no debug enabled
aufs 2-standalone.tree-34-20100621
msgmni has been set to 7866
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: duty_cycle spans bit 4
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
drbd: initialized. Version: 8.3.7 (api:88/proto:86-92)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xffff88011bd1a380
3ware Storage Controller device driver for Linux v1.26.02.002.
ahci 0000:00:12.0: version 3.0
ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
e1000e 0000:02:00.0: Disabling ASPM L0s
0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 40:61:86:ee:20:46
0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:03:00.0: setting latency timer to 64
e1000e 0000:03:00.0: irq 27 for MSI/MSI-X
e1000e 0000:03:00.0: Disabling ASPM L0s
0000:03:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 40:61:86:ee:20:47
0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:03:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com>
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect
please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
i2c /dev entries driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
w83627ehf: Found W83627DHG chip at 0xa10
Software Watchdog Timer: 0.07 initialized. soft_noboot=0
soft_margin=60 sec (nowayout= 0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel(a)redhat.com
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ip6tnl0: Disabled Privacy Extensions
NET: Registered protocol family 17
powernow-k8: Found 1 Quad-Core AMD Opteron(tm) Processor 1381
processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2500 MHz)
powernow-k8: 1 : pstate 1 (1800 MHz)
powernow-k8: 2 : pstate 2 (1300 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 <
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
sda5
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdb5 sdb6 >
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 636k freed
aufs test_add:252:busybox[1175]: uid/gid/perm /squash 0/0/0755, 0/0/01777
md: bind<sdb6>
md: bind<sda6>
raid1: md3 is not clean -- starting background reconstruction
raid1: raid set md3 active with 2 out of 2 mirrors
md3: detected capacity change from 0 to 189594992640
md: resync of RAID array md3
md3:
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
unknown partition table
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for resync.
md: using 128k window, over a total of 185151360 blocks.
md: bind<sdb5>
md: bind<sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 284393668608
md2: unknown partition table
md: bind<sdb3>
md: bind<sda3>
raid1: md1 is not clean -- starting background reconstruction
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 20971454464
md1: unknown partition table
md: delaying resync of md1 until md3 has finished (they share one or
more physical units)
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 1048510464
md0: unknown partition table
e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:02:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
# mdadm -D /dev/md0
/dev/md0:
Version : 00.90
Creation Time : Sat Mar 19 22:52:12 2011
Raid Level : raid1
Array Size : 1023936 (1000.11 MiB 1048.51 MB)
Used Dev Size : 1023936 (1000.11 MiB 1048.51 MB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Wed Apr 27 11:35:21 2011
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
UUID : 87db17c2:d806a38c:3d186b3c:53958f34
Events : 0.14
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 8 17 1 active sync /dev/sdb1
Thank you
Alex
