Discuss June 2011

discuss@lists.centos.org

206 participants
140 discussions

Looking for gfs2-kmod SRPM
by centoslistbrian＠nym.hush.com 09 Jun '11

09 Jun '11

I'm searching for the SRPM corresponding to this installed RPM. % yum list | grep gfs2 gfs2-kmod-debuginfo.x86_64 1.92-1.1.el5_2.2 It is missing from: http://msync.centos.org/centos-5/5/os/SRPMS/ What I need from the SRPM are the patches. I'm working through some issues using the source code, and the patches in the RedHat SRPM (http://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/SRP MS/gfs2-kmod-1.92-1.1.el5_2.2.src.rpm) seem to be slightly different. Particularly, the output from gfs2_tool lockdump shows a 'q' glock flag in CentOS, but the RedHat source does not seem to reflect that. (The lockdump output is totally changed from the original source code by the patches.) Much appreciated if anyone can help. Thanks, Brian

2 1

what is difference between "slow initialize" and "patrol read" on RAID?
by mcclnx mcc 09 Jun '11

09 Jun '11

We have DELL server with MD1000 Disk array in it. O.S. is CENTOS 5.5. Recently every time MD1000 "patrol read" start I will get "media error" messages on /var/log/message file. I use MD1000 "slow initialize" to initialize "bad disk" and NO error. After "slow initialize" finish, I manually "startup patrol read". I continue get "media error" on /var/log/message. Anyone know what difference between "slow initialize" and "patrol read"? Thanks.

5 5

daemon user can't acess file while nobody user can.
by Nicolas Ross 08 Jun '11

08 Jun '11

I have a server where /home is on a nfs. I installed an apache (my compile) server. By default, it runs as daemon. That user can't acces files in /home/*/public_html, while the nobody user can. So if I change my apache config, it now can. /home is : drwxr-xr-x /home/user is : drwxr-xr-x /home/user/public_html is : drwxr-xr-x selinux is disabled. In the error log of apache I get : (13)Permission denied: access to /~user/file.jpg denied I changed the shell for the daemon user so I can diagnose a little bit more, and I cannot get into the user directory. When on a local drive, it's ok. So why is that the daemon user cannot go into the user directory via nfs ?

2 1

Changing from RHEL to CentOS
by John J. Boyer 08 Jun '11

08 Jun '11

I have a RHEL system and I'm thinking of changing to CentOW. How can this be done most easily. It is important that the e-mail setup not be disturbed, since it was crafted to work with an IP that requires authentication. Thanks, -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

8 15

ipv6 day
by Karanbir Singh 08 Jun '11

08 Jun '11

hi, The ipv6 day[1] is now in full swing across the world. Are your CentOS machines taking part ? serving content ? Are you seeing anything interesting or strange on your CentOS machines as a fall out ? 1]: http://www.worldipv6day.org/ - KB

2 1

Re: [CentOS] mouse scroll-wheel side-click configuration?
by fred smith 08 Jun '11

08 Jun '11

On Tue, Jun 07, 2011 at 11:45:02PM +0200, Ljubomir Ljubojevic wrote: > fred smith wrote: > > Still googling, no joy so far (though I'm not giving up yet). > > > > Can anyone point me to a resource that may help me figure out how to > > make the side-clicks of the scroll wheel on a logitech mouse do something > > useful? > > > > thanks! > > > Can you elaborate in what setting? GNOME? CentOS 5.x? Quoting original > post would be nice. I have almost 3680 mails from several months, but > haven't seen this one. > > Ljubomir > _______________________________________________ Hi Ljubomir! This was the original posting. I was just saying that I'm not asking here merely because I'm too lazy to look on my own... I've got this logitech v220 notebook mouse, and the scroll wheel can be clicked left or right as well as rotated or clicked by pressing down. "normal" usage (i.e., left click, right click, middle click, and rotation of scroll wheel) works fine. Using xev I don't see anything reported for the side-click of the scroll wheel, so it may be that without some action by a driver, that the side-clicks aren't enabled. I suspect that Logitech's windoze driver tweaks the mouse in some way that "turns on" the additional actions of pressing the wheel to the left or right. The package lists LInux (2.6 kernel) as a supported OS, but of course they provide only windows/mac drivers for it, and the web site explicitly lists Linux as not supported. Talk about mixed messages. It's not a big deal, was just wondering if there was a way to recognize those clicks, in case there was something useful to be done with them. I've tried tweaking xorg.conf to increase number of buttons and changing z-axis from "4 5" to "6 7" but that stops the scroll wheel from working at all, so I put it back. Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord detests the way of the wicked but he loves those who pursue righteousness. ----------------------------- Proverbs 15:9 (niv) -----------------------------

2 2

Installing rather than changing
by John J. Boyer 08 Jun '11

08 Jun '11

After reading the replies to my message about changing from RHEL to CentOS I think it might be easier to install the latest version of CentOS from scratch. I can save my home directory and my e-mail setup. My access to the present system is by ssh. How can I download everything with ssh then start the install? Since I am blind, I may need sighted help during the actual install process. Is it possible to specify answers to the questions wich the install will ask beforehand? Pardon the dumb questions. I want to get the process completed with as little interference to my software development work as possible. Thanks, -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

2 1

mouse scroll-wheel side-click configuration?
by fred smith 07 Jun '11

07 Jun '11

Still googling, no joy so far (though I'm not giving up yet). Can anyone point me to a resource that may help me figure out how to make the side-clicks of the scroll wheel on a logitech mouse do something useful? thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "And he will be called Wonderful Counselor, Mighty God, Everlasting Father, Prince of Peace. Of the increase of his government there will be no end. He will reign on David's throne and over his kingdom, establishing and upholding it with justice and righteousness from that time on and forever." ------------------------------- Isaiah 9:7 (niv) ------------------------------

2 1

hard disk install failure
by Timothy Murphy 07 Jun '11

07 Jun '11

Has anybody successfully installed CentOS- I tried (several times) installing CentOS-5.6 from a hard disk, and each time it failed after installing all the rpms, with the warning "The installation has tried to mount image #2, but cannot find it on the hard drive." When I pressed the Debug button one time after the failure, it seemed to say that it was looking for the file in /dev/sdb7//ext2/ (/dev/sdb7 being the site of the DVD ISO). But I'm not sure what "image #2" is? Or where it should be put? Incidentally, I started by copying isolinux/vmlinuz and isolinux/initrd.img to the the directory CentOS-5.6 in the /boot parition of a working linux (Fedora) system, and adding the stanza ---------------------------- title CentOS-5.6 root (hd0,1) kernel /CentOS-5.6/vmlinuz repo=hd:/dev/sdb5:/ initrd /CentOS-5.6/initrd.img ---------------------------- The repo option was ignored, and I was asked if I wanted to install by FTP, from Hard Disk, etc. In the end I installed by http from my web-server, after mount -o loop CentOS-5.6-x86_64-bin-DVD-1of2.iso /var/www/html/ on the server . This worked faultlessly, and seems to be by far the easiest way to install CentOS or Fedora if a local web-server is available. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

12 27

text-mode system and /media
by Kenneth Porter 07 Jun '11

07 Jun '11

I'm running a headless server, so no GUI, just ssh logins. I don't seem to have the mechanism that automounts USB drives to a subdirectory of /media, and from googling around I think that's a feature of a GUI-based system. What implements it? Right now I manually create a mountpoint in /mnt and then manually mount by label from /dev/disk/by-label after plugging the drive in. It would be convenient if the drive automounted when plugged in.

7 12

← Newer
1
...
8
9
10
11
12
13
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2011