Discuss July 2011

discuss@lists.centos.org

315 participants
288 discussions

Changing the size of the swap memory
by John J. Boyer 21 Jul '11

21 Jul '11

When I first installed my CentOS system the machine had only 1 GB. the swap memory was set to 2 GB Now the machine has 4 GB but swap is still 2 GB. With that much memory maybe it doesn't matter, but it sure looks odd. Is there any way to change it? Thanks, John -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

4 3

tripwire alternative
by Nguyen Vu Hung (VNC) 21 Jul '11

21 Jul '11

Hello all, Years ago, I used to work with tripwire for system monitoring. Last time I checked with "yum search tripwire", there is no hit. IIRC, it used to be packed by default on older Redhat distros. Any suggestion for an alternative of tripwire for my CentOS 5.6? Cheers, -- ********************************************************************** Viet Nhat General Joint Stock Company (Vinicorp) Addr: 3F, 92 Hoang Ngan - Trung Hoa - Cau Giay - Hanoi Tel :(+84)-4-3556-3607 Fax :(+84)-4-3556-3608 Nguyen Vu Hung Email: vuhung(a)vinicorp.com.vn Mobile: (+84)-167-252-5834 ***********************************************************************

3 2

Variable assigned to grep output - missing letter n!
by Sean Carolan 21 Jul '11

21 Jul '11

This is kind of odd. [scarolan@host:~]$ cat loremipsum.txt Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec quis ipsum sed elit laoreet malesuada. Quisque rhoncus dui vitae eros euismod fermentum sollicitudin sem scelerisque. Nulla facilisi. Maecenas mollis pulvinar euismod. Duis viverra pharetra turpis eget feugiat. Nulla facilisi. Nullam facilisis, felis vitae lacinia fermentum, enim erat placerat erat, vel imperdiet lorem velit et ligula. Nam congue est in nisl lacinia lobortis. Vivamus elementum lacinia sodales. Curabitur commodo risus tincidunt augue pulvinar vehicula. Morbi eget velit sollicitudin nibh porta molestie. Maecenas in augue id quam ullamcorper rutrum. [scarolan@host:~]$ vi loremipsum.txt [scarolan@host:~]$ myvar=$(grep lorem loremipsum.txt) [scarolan@host:~]$ echo $myvar Lorem ipsum dolor sit amet, co sectetur adipisci g elit. Do ec quis ipsum sed elit laoreet malesuada. Quisque rho cus dui vitae eros euismod ferme tum sollicitudi sem scelerisque. Nulla facilisi. Maece as mollis pulvi ar euismod. Duis viverra pharetra turpis eget feugiat. Nulla facilisi. Nullam facilisis, felis vitae laci ia ferme tum, e im erat placerat erat, vel imperdiet lorem velit et ligula. Nam co gue est i isl laci ia lobortis. Vivamus eleme tum laci ia sodales. Curabitur commodo risus ti cidu t augue pulvi ar vehicula. Morbi eget velit sollicitudi ibh porta molestie. Maece as i augue id quam ullamcorper rutrum. Where did all the letter n's go?

5 7

Re: [CentOS] CentOS 6 PXE boot: Unable to download the kickstart file
by Ole Holm Nielsen 21 Jul '11

21 Jul '11

Patrick Lists wrote: >>> I fail to see how your repository problem is related to my Kickstart PXE/NFS >>> problem. We can install CentOS 6 (no Kickstart) without problems using PXE. >>> It's the NFS-mounting of the Kickstart-file which fails. What I'd love to learn >>> is how others have made NFS/Kickstart work... >> >> Is CentOS 6 assuming NFSv4 by default perhaps? > > According to the RHEL 6.0 Release Notes it is: > > "Mounting a file system via NFS now defaults to NFSv4." Yes, this sounds like the correct explanation! Our RHEL5.6 PXE/TFTP/NFS server is certainly configured for NFSv3. I haven't explored the NFSv4 approach though. How can we tweak the CentOS6 Kickstart installation to explicitly request an NFSv3 service in the PXE config file: kernel CentOS-6-i386/vmlinuz append load_ramdisk=1 initrd=CentOS-6-i386/initrd.img network ks=nfs:130.226.86.4:/u/rpm/kickstart/ks-centos-6-clean-i386.cfg To rephrase my question: Where do we find documentation for the vmlinuz append flags shown above, in particular documentation of the ks=... flags? Hopefully there'll be some way to force an NFSv3 mount in stead of the default NFSv4? Or perhaps we need to use http: and stop using nfs: with CentOS6? Thanks, Ole

5 4

Re: [CentOS] Memory Usage in Top and System Monitor
by Michael McNulty 21 Jul '11

21 Jul '11

Thanks for the replies. I checked free and that makes sense to me now. The only thing I cannot figure out is, if there is all this memory available why would swap space start building? I started checking all this out because the system slowed to a crawl after I noticed swap space being used which does not make sense to me if there is available memory. total used free shared buffers cached Mem: 8301448 7917100 384348 0 59984 6009248 -/+ buffers/cache: 1847868 6453580 Swap: 4128760 1225896 2902864 btw - this is Centos 5.6 box using the PAE kernel. 2.6.18-238.12.1.el5PAE

2 1

Memory Usage in Top and System Monitor
by Michael McNulty 20 Jul '11

20 Jul '11

Can someone help clear up some confusion in reading memory usage in Top and System monitor. Here is a picture of both. http://s1176.photobucket.com/albums/x327/ionosphere2011/ Why does "System Monitor" show 1.7gb free out of 8gb. While Top shows all 8gb being used? If 1.7gb is free then it should not be using swap space so I assume "System Monitor" is reporting it incorrectly? Thanks -- Mike

3 2

Refurbished Dell Servers (fwd)
by Keith Roberts 20 Jul '11

20 Jul '11

Just got this from another mailing list, just in case anyone here might be interested? Keith Roberts ----------------------------------------------------------------- Websites: http://www.karsites.net http://www.php-debuggers.net http://www.raised-from-the-dead.org.uk All email addresses are challenge-response protected with TMDA [http://tmda.net] ----------------------------------------------------------------- ---------- Forwarded message ---------- To: keith(a)karsites.net From: Web Hosting Talk <email(a)inetinteractive-email.com> Subject: Refurbished Dell Servers Web Hosting Talk Host Brief - 2011Jul20 - Apto Host Brief If you are having trouble viewing this email, http://click.inetinteractive-email.com/?qs=cc50bf36287ad5678e3ec13e6ca486e5… view it online As a Web Hosting Talk member, we'd like to offer you this special message from one of our partners. Apto Solutions http://click.inetinteractive-email.com/?qs=cc50bf36287ad56771e0ba40e223be2c… Full racks available. Tested and guaranteed. Each 2U rack-mounted chassis contains: - Four server nodes - Eight (8) Xeon 5420 SLARP Processors - Sixteen (16) 4Gb PC2-5300 DIMMs - Eight 3.5" 750Gb SATA HDDs Supply is limited. Contact us today. Call Us: 1.855.ASK.APTO Email us: mailto:INFO@APTOSOLUTIONS.COM INFO(a)APTOSOLUTIONS.COM Visit our site: http://click.inetinteractive-email.com/?qs=cc50bf36287ad56771e0ba40e223be2c… www.aptosolutions.com/poweredge.aspx http://click.inetinteractive-email.com/?qs=cc50bf36287ad56771e0ba40e223be2c… Apto Solutions is the source for all of your IT equipment needs. Your trusted solution for quality, fully-tested, pre-owned & surplus new IT equipment. We are a leading global asset recovery service provider with large leasing, corporate, and government contracts. We are THE SOURCE for the secondary market.

1 0

Script to sync with repo
by Jerry Geis 20 Jul '11

20 Jul '11

under 5.6 I have a script that runs every night to rsync the repodata for local installations. I added the 6.0 to do the same. Something seems wrong now for 6.0. I do the same thing and I get errors from my local repo at install time. Seems like the cyrus-sasl package is never happy and aborts the installation. Is something wrong with the script below? It seems like it successfully copies the files. I ran it manually and did not see any errors. Any thoughts? Thanks, Jerry # The kickstart files point to the "repo" # # This file will creat the directories and copy the files # for VERSION in "5.6" "6.0" do mkdir -p /var/www/html/centos/$VERSION/updates/x86_64/RPMS mkdir -p /var/www/html/centos/$VERSION/updates/x86_64/repodata rsync -av rsync://mirrors.kernel.org/mirrors/centos/$VERSION/updates/x86_64/RPMS/* /var/www/html/centos/$VERSION/updates/x86_64/RPMS rsync -av rsync://mirrors.kernel.org/mirrors/centos/$VERSION/updates/x86_64/repodata/* /var/www/html/centos/$VERSION/updates/x86_64/repodata done ~

4 4

firewall?
by hadi motamedi 20 Jul '11

20 Jul '11

Dear All I need to put my centos 5.6 server as firewall server in fron of a windows-running node before connecting it to the net. Can you please let me know what stuff do I need to put on my centos server? Thank you

23 89

CentOS mailing list, Free Pearl Set
by dr.virus.india＠gmail.com 20 Jul '11

20 Jul '11

17 49

← Newer
1
...
9
10
11
12
13
14
15
...
29
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2011