Discuss September 2011

discuss@lists.centos.org

268 participants
254 discussions

Memory vs. Display Card
by Rick 28 Oct '25

28 Oct '25

Since memory has become quite cheap lately I decided to move from 2 GB to 6. When I installed the memory every thing was fine until I went to run level 5. At that point the screen turned to garbage and the system froze. Is there a way to fix this so I can use the memory I bought? Do I need a new display card? Current hardware: Intel D975XBX2 Motherboard VGA compatible controller: ATI Technologies Inc RV505 [Radeon X1550 64-bit] -- http://www.spinics.net/lists/

13 19

SSD for Centos SWAP /tmp & /var/ partition
by Keith Roberts 03 Sep '25

03 Sep '25

Has anyone actually used a SSD in a Centos setup? My little experiment with a s/h WD drive for /tmp and SWAP partitions kicked the bucket on Wednesday, when the poor WD drive caught the click-of-death. It was a s/h drive to start with and lasted about 4 months. But that was without the /var/log/ partition being written to it, as I mounted that back onto /var/log from the original drive. So I had to install another (WD) drive, and repartion it and rebuild my RPM package database, from the backed-up Packages file. That seems to be all OK now. I'm wondering if it would be a good idea to use a new SSD for moving all the disk i/o to, that Linux likes to do so often. Plus putting SWAP onto a decent SSD should speed things up somewhat. Here's a short video of a laptop fitted with a SSD drive booting macOS, compared to a similar laptop booting from the standard HDD. The laptop with the SSD boots and loads some apps in 28 seconds. The other one takes twice as long. http://eshop.macsales.com/shop/SSD/OWC/Mercury_Extreme_Pro_6G/?utm_source=t… Kind Regards, Keith Roberts ----------------------------------------------------------------- Websites: http://www.karsites.net http://www.php-debuggers.net http://www.raised-from-the-dead.org.uk All email addresses are challenge-response protected with TMDA [http://tmda.net] -----------------------------------------------------------------

33 96

Re: [CentOS] sieveshell fails to start on CentOS 6.0
by Devin Reade 12 Jun '13

12 Jun '13

--On Wednesday, August 10, 2011 01:52:21 PM -0400 Harold Pritchett <harold(a)uga.edu> wrote: > [harold@newmick ~]$ sieveshell localhost > connecting to localhost > unable to connect to server at /usr/bin/sieveshell line 170. Try specifying both --user and --authname as appropriate. sieveshell can be misleading in its error messages, and you may actually have an authentication error rather than a connection error there. You could run it under strace to make sure. Devin

3 2

IE 9 not sending digest auth info
by Paul Heinlein 10 Jan '13

10 Jan '13

I migrated our internal wiki server last week, and some IE users aren't able to authenticate. The service is hosted by Apache using Digest authentication. It migrated from Apache 2.2.9 (Debian 5) to Apache 2.2.15 (CentOS 6). The internal hostname for the wiki server is a DNS CNAME that was repointed from one host to another during the cutover. In a normal session, 1. Client sends GET 2. Server sends 401 with WWW-Authenticate header 3. Client sends GET with Authorization header 4. Server sends 200 with Authentication-Info header and page content When using IE 9 (and possibly 8, I'm still trying to track that down), 1. Client sends GET 2. Server sends 401 with WWW-Authenticate header 3. Client resends GET (*without* Authorization header) 4. Server sends 401 with WWW-Authenticate header 5. Etc. IE seems to be ignoring 401 and/or the WWW-Authenticate headers. Using Chrome on Windows works fine; the issues are specific to IE. Any ideas? My google-fu has failed me. -- Paul Heinlein <> heinlein(a)madboa.com <> http://www.madboa.com/

3 4

CentOS4 desktop has stopped recognizing removable media - haldaemon problem?
by Bart Schaefer 18 Feb '12

18 Feb '12

USB sticks and cameras used to pop right up on my desktop. Now they don't. I've checked the Gnome "Drives and Media Preferences" and nothing has changed -- I have "Mount removable media when inserted" etc. (Tried toggling it off and back on, no effect.) I've logged out and back in, even rebooted. /var/log/messages shows the devices are being recognized by udev: Jun 27 19:53:37 torch kernel: Attached scsi removable disk sde at scsi11, channel 0, id 0, lun 0 Jun 27 19:53:37 torch scsi.agent[13576]: disk at /devices/pci0000:00/0000:00:0b.1/usb1/1-5/1-5:1.0/host11/target11:0:0/11:0:0:0 Jun 27 19:53:37 torch udevd[1347]: udev done! Jun 27 19:53:47 torch udevd[1347]: udev done! However, that's followed by this: Jun 27 19:54:07 torch hald[5179]: Timed out waiting for hotplug event 699. Rebasing to 699 I restarted hald (service haldaemon restart) and it picked up one of the two devices I'd plugged in, but not the other.

2 2

Centos v3.3 CD 2
by Luis-Miguel Astudillo 15 Nov '11

15 Nov '11

Sorry, I have been away for a while. has anyone fixed CD2 fotr CentOS v3.3 ? -- Luis

6 7

fdisk on centos 6
by Jerry Geis 14 Nov '11

14 Nov '11

I am getting the WRONG values reported from fdisk on centos 6. This is listing an 8G CF card on /dev/sde Disk /dev/sde: 8019 MB, 8019099648 bytes 247 heads, 62 sectors/track, 1022 cylinders Units = cylinders of 15314 * 512 = 7840768 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd1b46611 It should be 255 heads, 63 sectors/track. Under centos 5 this is reported correctly. I even tried specifying the -S 63 -H 255 on the fdisk command line - that did not help. my symptom is when I setup my CF card to run linux - I get a grub error 2. What kind of madness is happening? Jerry

3 7

Approximate size of CentOS mirror
by Christopher Hawker 11 Nov '11

11 Nov '11

Hey all, Roughly, how much disk space would I need on my server to mirror the entire ISO collection and the repository files. Also, how would I tell my server to only mirror CentOS 5 and 6? -- If you have any questions, please do not hesitate to contact me on +61 478 241 896. Regards, Christopher Hawker

5 8

openvpn + bridge utils in CentOS 6
by 唐建伟 09 Nov '11

09 Nov '11

Hi all, I just intalled openvpn + bridge in CentOS 6, but i get strange problems: the remote PCs cannot get the local PCs' MACs and also, the local PCs cannot get the remote PCs' MACs but when i run "brctl showmacs br0" it will list all the MACs and also " brctl show" will show that all the correct adapters are in br0 SELinux disabled any ideas? -- Tang Jianwei System Administrator

3 13

Odd issue with C6 and NIS
by James A. Peltier 11 Oct '11

11 Oct '11

I seem to have this very odd issue with CentOS 6 WRT NIS. I have taken the package selection that I used with CentOS 5 and basically plopped it into my C6 kickstart file (see below). On C5 this works just fine and I'm able to log in with NIS credentials just fine. However, it looks like on C6 if you use a package selection like this, you also need to specify the yp-tools package as part of the kickstart *even though* you specify an authentication method of NIS in the kickstart. Seems like a bug to me?!? auth --useshadow --enablemd5 --enablenis --nisdomain test --nisserver yp.example.com %packages @core augeas autofs dstat nfs-utils ntp openssh openssh-clients openssh-server portreserve puppet redhat-lsb rsh-server sendmail sendmail-cf sudo sysstat tcp_wrappers wget xinetd yum-utils %end -- James A. Peltier IT Services - Research Computing Group Simon Fraser University - Burnaby Campus Phone : 778-782-6573 Fax : 778-782-3045 E-Mail : jpeltier(a)sfu.ca Website : http://www.sfu.ca/itservices http://blogs.sfu.ca/people/jpeltier I will do the best I can with the talent I have

12 39

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss September 2011