Discuss December 2012

discuss@lists.centos.org

146 participants
124 discussions

Yum search for unavailable file!
by Ashkan Rahmani 26 Dec '12

26 Dec '12

Hi, I'm trying to install ant on my centos 6.3, this is behind a http (only http and not ftp) proxy server. after execute yum install ant, I got some error which indicate mirror speed is extremely low, less than 1bps! and go to test another mirror and error cycle starts again. this is error: "http://wftp.tu-chemnitz.de/pub/linux/centos/6.3/updates/x86_64/repodata/e2e…: [Errno 12] Timeout on http://ftp.tu-chemnitz.de/pub/linux/centos/6.3/updates/x86_64/repodata/e2e0…: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds') Trying other mirror." i tried to get http://wftp.tu-chemnitz.de/pub/linux/centos/6.3/updates/x86_64/repodata/e2e… manually but it seeems there is not any file there. for test I tried o install some other application (joe, geany, ) and every things worked well. what is the solution? info: ipv6 is disabled, fastest mirror is enable, proxy enabled and configured in yum.conf... any thing else? uh, centos is uptodate -- Best Regards, Ashkan R < ashkan82r(a)gmail.com >

1 0

iscsi root + Dracut
by Iurii Andamasov 26 Dec '12

26 Dec '12

Hello, trying to use CentOS 6.3 from iscsi root install works without an issue, but boot will fail with iscsistart error (can't connect to iscsid) already tried to make new initramfs with dractut(with iscsi module added) but still no luck Anyone can point me to the right direction? Thanks!

1 0

web mail and Squirrelmail
by Gregory P. Ennis 26 Dec '12

26 Dec '12

Everyone, Are there any opensource web based alternatives to squirrelmail. Do any of you use squirrlmail. How do you like it. Greg Ennis

18 24

Re: [CentOS] CONFIG_ARPD turned on in centosplus kernel.
by Akemi Yagi 26 Dec '12

26 Dec '12

On Tue, Dec 25, 2012 at 11:05 AM, Steve Clark <sclark(a)netwolves.com> wrote: > On 12/19/2012 06:30 PM, Steve Clark wrote: > > On 12/19/2012 11:35 AM, Akemi Yagi wrote: > A kernel update was released upstream yesterday. The corresponding > plus kernel, kernel-2.6.32-279.19.1.el6.centos.plus, has been built > with CONFIG_ARPD=y and is now available from mirrors. > > Akemi > > Thanks Akemi, > > I am on vacation right now but will test it as soon as I can. > Hi Akemi, > > Been using the new kernel for 5 days+ and opennhrp/DMVPN has been working > without a hitch. > > Thanks again. > -- > Stephen Clark Thanks, Steve, for reporting back on the Christmas Day ! Glad to hear things are working again. Akemi

1 0

Re: [CentOS] CONFIG_ARPD turned on in centosplus kernel.
by Akemi Yagi 26 Dec '12

26 Dec '12

On Wed, Dec 12, 2012 at 8:06 AM, Steve Clark <sclark(a)netwolves.com> wrote: > On 12/12/2012 11:02 AM, Akemi Yagi wrote: > http://bugs.centos.org/view.php?id=5709 > Sorry about that. I apparently missed it when doing the config files > for CentOS 6.3. So, all 6.3 cplus kernels have that option disabled. > :( > > I reopened the bug 5709. Could you add a note there so we can track > this issue? I will try to get this corrected on the next kernel > update. > > Akemi > > Hi Akemi, > > I already added a note. Thanks a lot for doing this. > > Regards, > Steve A kernel update was released upstream yesterday. The corresponding plus kernel, kernel-2.6.32-279.19.1.el6.centos.plus, has been built with CONFIG_ARPD=y and is now available from mirrors. Akemi

2 2

Question: How to utilize multi-core CPUs
by Mike Watson 25 Dec '12

25 Dec '12

I've installed CentOS 6.3 on a quad-four box. The model only indicated dual core but CentOS is telling me there are four. This is the first multi-core Linux installation I've had. What is the best way to utilize the multi-core CPUs? I'd like to distribute the load but I'm unsure how to do that. mw -- -- "Lose not thy airspeed, lest the ground rises up and smites thee." -- William Kershner http://crucis-court.com http://www.crucis.net/1632search

5 6

selinux - centos 6.3 - mail
by Gregory P. Ennis 24 Dec '12

24 Dec '12

Everyone, I recently had a disc drive failure on a centos 5.8 internal mail server. I replaced the drive and installed centos 6.3. I had selinux turned off on the 5.8 machine, and with the upgrade to 6.3 decided to leave selinux active with the hopes I had learned enough to be able to use it. I have a couple of perl scripts that are activated by email that prints the contents of the mail packet on a printer. I have been able to fix the temporary directories that are used with changes of selinux permissions, but I have not been able to make everything work with the command : $arg = ("lp -o raw -d $LPT $MAILFILEO"); system($arg); I get the following log entry : Can't exec "lp": Permission denied at /usr/local/bin/s.printer.process line 190, <FILEI> line 19. Any ideas how I can get 'lp' to accept usage from the 'mail' user account? Everything works ok when selinux is turned off. I would like to keep it on at this point. Thanks, Greg Ennis

2 2

Postfinger
by Robert Moskowitz 24 Dec '12

24 Dec '12

This is a utility for Postfix; a bit old, but in a couple of threads over on the postfix list on researching issues with my postfix questions it was suggested that I give postfinger a try. Does anyone have an rpm for it for Centos 6.3?

2 1

I small deficiency in postfix 2.6.6 on Centos 6.3
by Robert Moskowitz 24 Dec '12

24 Dec '12

posfconf debugger_command does not work. This is a 'known' problem with 2.6 and fixed in postfix 2.9. This is tied into the large code rewrite in 2.9, and thus cannot be patched in 2.6. You can see my thread on this over on the postfix list. There was a comment how those running 4 year old code can look forward to the new troubleshooting and support features in 2.10...

2 2

Waiting for CentOS to thaw....
by Vlad K. 24 Dec '12

24 Dec '12

Hello list, I've put CentOS 6.3 x86_64 on my desktop, replacing Fedora 17 x86_64. This is the first time I'm using CentOS on a desktop, so far only on the servers. The problem is with thawing from hibernation. Time from turning on the hibernated machine to reaching the login prompt is not that of an issue, although sometimes it can take a while (significantly more than with Fedora). The problem is after I log in. It appears that none of the running programs will have thawed until I click their tabs in the taskbar, when the disk crunching begin and the program is unresponsive for up to a minute or two until it loads up from disk I guess, regardless of how much I wait between login and clicking a tab int taskbar. The biggest problem is with Firefox. I keep several tabs open and it takes literally minutes for it to become responsive. Even the terminal takes several seconds. During that time the window does not render except it's title bar and outer border. This is on the very same hardware (btw, it's AMD Phenom II X2, 4GB of RAM) where Fedora was running just a few weeks ago. Help? -- .oO V Oo. Work Hard, Increase Production, Prevent Accidents, and Be Happy! ;)

2 2

← Newer
1
2
3
4
5
6
7
...
13
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2012