Discuss May 2012

discuss@lists.centos.org

193 participants
201 discussions

Sendmail problem - baffled
by Jussi Hirvi 16 May '12

16 May '12

Our backup mail server (which I have just re-configured) tries to contact the primary mail server, and fails. My log shows repeatedly "connection refused": May 15 22:21:41 mx2 sm-mta-rx[8674]: q4FIhPij007483: makeconnection (mail.greenspot.fi. [83.143.217.182]) failed: Connection refused by mail.greenspot.fi. May 15 22:21:41 mx2 sm-mta-rx[8674]: q4FIhPij007483: to=<myuser(a)mydomain.com>, delay=00:38:16, xdelay=00:00:00, mailer=esmtp, pri=10021795, relay=mail.greenspot.fi. [83.143.217.182], dsn=4.0.0, stat=Deferred: Connection refused by mail.greenspot.fi. But yet I can successfully telnet that host: # telnet mail.greenspot.fi 25 Trying 83.143.217.182... Connected to mail.greenspot.fi (83.143.217.182). Escape character is '^]'. 220 mail.greenspot.fi ESMTP Sendmail; Tue, 15 May 2012 22:34:22 +0300 Also, the mailer-daemon *can* send automatic warning messages to mail.greenspot.fi just fine. So, the error probably is in my sendmail configuration. The error appeared as I today reconfigured the backup mail server to use a "dual sendmail" setup with amavis and greylisting. How could I proceed? - Jussi

8 23

True bond howto for Centos 6
by aurfalien 15 May '12

15 May '12

Hi all, Read many posts on the subject. Using 802.3ad. Few problems; Cannot ping some hosts on the network, they are all up. Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts. Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway. When cold booting it somewhat works, some hosts are pingable while others are not. When restarting the network service via /etc/init.d/network, nothing is pingable. Here are my configs; ifcfg-bond0 DEVICE=bond0 USERCTL=no BOOTPROTO=none ONBOOT=yes IPADDR=10.0.0.10 NETMASK=255.255.0.0 NETWORK=10.0.0.0 TYPE=Unknown IPV6INIT=no ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no /etc/modprob.d/bonding.conf alias bond0 bonding options bond0 mode=5 miimon=100 Bonding worked great in Centos 5.x, not so well for me in Centos 6.2. My goal is to get this working under bridging for KVM, I can only imagine the nightmare seeing I can't get a simple bond to work! Any guidance is golden. - aurf

9 18

Excluding ConsoleKit in kickstart
by Dennis Jacobfeuerborn 15 May '12

15 May '12

Hi, I'm working on automating virtual machine installs using kickstart files and virt-install. The problem I have is that these kickstart installations install different packages than a minimal manual install. While I got rid of some of them I can't seem to prevent ConsoleKit from getting installed. I put "-ConsoleKit" in the packages section and later also added packages that require it but in the end it is still getting installed. Any ideas what I could do to stop it from being installed? Regards, Dennis

2 3

Re: [CentOS] Maintainer for Krita on CentOS
by Michael Lampe 15 May '12

15 May '12

<m.roth at 5-cent.us> wrote: >>> erm... that is going to mean that everytime there is an update for >>> either QT or anything that it links into or anything that is in a lib >>> associated down that chain - the entire stack needs to be rebuilt. Are >>> you sure this is a good idea ? >> >> I'm not sure, but the guy who is maintaining it seems to think so. I >> advised him to build for CentOS 6, not 5, but 5 is much more widely >> distributed and there are other reasons for staying with CentOS 5, >> such as AutoDesk support. > > I hate having to worry about multiple libraries. And in updates of the > std. packages, it can break your specialized one. I would have to > recommend to your krista list to build against the library we have now. Nothing in el5 depends on the qt4-4.2.x that ships with el5. It's an old, rotten, and completely pointless package. Nothing of any interest could be build with it for years now, probably never ever was it of any use to anyone. I replaced it with a rebuild of qt4-4.6.2-20 from el6. This gives me a common and useable base for both el5 and el6. That could be a sensible approach for a krita.el5 package, too. -Michael

2 1

LAMP (Perl) Consultant.
by Milton Calnek 15 May '12

15 May '12

Hello all, I am looking for a LAMP (perl) consultant. Preference given to one who is located in Canada. If you are interested, please contact me by email off list. Thanks. Milton Calnek / Manager of Operations / LiveBlock Auctions International P. 306.584.1383 / C. 306.526.8408 Service Desk: 1.877.694.6100 / 306.694.6100

1 0

VPN Traffic
by Shiv. NK 15 May '12

15 May '12

Hi List Members, i understand that perhaps i should not ask this question here. But you all are technical. Therefor, has anyone ever monitor the VPN traffic using any open source tools such as Zabbix/Nagios/Cacti? or any other Thanks

3 4

CentOS-announce Digest, Vol 87, Issue 9
by centos-announce-request＠centos.org 15 May '12

15 May '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0581 CentOS 5 aspell-en FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 15 May 2012 08:57:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0581 CentOS 5 aspell-en FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120515085700.GA13174(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0581 Upstream details at : http://rhn.redhat.com/errata/RHEA-2012-0581.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3f3a755d69e428cdaeae28072937ef488c496fcdbfd6fd933cf53c900919a55e aspell-en-6.0-3.i386.rpm x86_64: ab6d656dd97b56d7ddd9e51f5aed5e58c748b564f33a42c02d6ebe259fe85b07 aspell-en-6.0-3.x86_64.rpm Source: 710c6e0bd3dad00191d38d0c7b8ed8ca0a5139c23fc4150e20df0792d2592284 aspell-en-6.0-3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 87, Issue 9 **********************************************

1 0

Everyday System Report CentOS 6.2
by Shiv. NK 15 May '12

15 May '12

Hi list Members, i receive one email everyday (system report) from CentOS5, such as ssh attempt made, available disk space etc.. but CentOS 6.2 does not do that. Any idea why that? Thanks / Shiv. NK

2 2

using fscache
by Rita 15 May '12

15 May '12

Hello, I was wondering if anyone used fscache and what their experience was. Is it stable and available on Centos 5.8? -- --- Get your facts first, then you can distort them as you please.--

1 0

Openswan or Ipsec-tools?
by Sergio Belkin 15 May '12

15 May '12

Hi, I wonder what is better on CentOS 6 if openswan or ipsec-tools, what do you recommend me? (I can't use openvpn) Thanks in advance! -- -- Sergio Belkin http://www.sergiobelkin.com Watch More TV http://sebelk.blogspot.com LPIC-2 Certified - http://www.lpi.org

5 8

← Newer
1
...
9
10
11
12
13
14
15
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss May 2012