Discuss March 2013

discuss@lists.centos.org

206 participants
228 discussions

Kernel panic after update
by Kwan Lowe 17 Mar '13

17 Mar '13

Hello all: I just updated yesterday and rebooted when I received this error: compat: exports duplicate symbol pcmcia_loop_typle (owned by kernel) FATAL: Error inserting dm_mod (/lib/modules/2.6.32.-358.2.1.el6.centos.plus.x86_64/kernel/drivers/md/dm-mod.ko): Invalid module format compat: exports duplicate symbol pcmcia_loop_tuple (owned by kernel) It is a centos-plus update however. Is this the correct forum to discuss issues with the plus repo? Thanks, Kwan

2 2

moderate rant un updates
by m.roth＠5-cent.us 16 Mar '13

16 Mar '13

So, another admin I work with rolled out most (but not kernel) updates to 6.4... but including xorg. I log out the end of the day, and I'm hosed - no X. Now, my not-two-year-old workstation has an nvidia card, and I'd installed kmod-nvidia from elrepo. I figured I'd fix my problem by finishing the upgrade and rebooting. Nope. I try to upgrade kmod-nvidia from elrepo. Anyone got any good explanations as to why they'd put kmod-nvidia-310.40 in the repo, with the previous version not obvious... AND NOT HAVE THE *REQUIRED* nvidia-x11-drv-310.40 in there? Why not wait until both pieces could be uploaded, since kmod-nividia WILL NOT INSTALL without the other...? I then stupidly uninstalled the previous kmod-nvidia & nvidia-x11-drv, hoping it would allow a good install. Nope. Found the proprietary installer on the NVidia site, and I'm up. <rant, snort> On a related note, does anyone have a link to a howto build the NVidia proprietary driver on a kernel that's *not* running, so we could prebuild it before the reboot? I see there are options in the script, but no examples. Also, is dkms coming in, or deprecated? mark

12 32

Lockups with kernel-2.6.32-358.0.1.el6.i686
by Ian Pilcher 16 Mar '13

16 Mar '13

I updated my home server with the 6.4 CR packages, and I've experienced 3 or 4 hard lockups since. The server is a fanless VIA C7 "CentaurHauls" system with a 1GHz CPU underclocked to 800MHz and 1GB of RAM. It has a dual-port Intel 82546GB NIC in its single PCI slot. (It also has an on-board Realtek RTL-8110SC/8169SC NIC that is plugged in, but doesn't currently have an IP address configured.) This server provides a number of services -- DNS, DHCP, routing between VLANs, DLNA media server, CUPS, etc. Most importantly, it runs Asterisk and manages all of the phones in the house. There's absolutely nothing in the logs related to the lockup. The system simply becomes totally unresponsive, to the point that the console cursor stops blinking. A hard reset is required to bring it back. kernel-2.6.32-279.22.1.el6.i686 seems to be completely stable. I don't really expect to be able to figure this out, but I thought I'd post here to see if anyone else is experiencing anything like this with this kernel. Thanks! -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com Sometimes there's nothing left to do but crash and burn...or die trying. ========================================================================

10 25

Re: [CentOS] Kernel panic after update to 6.4
by Emmett Culley 16 Mar '13

16 Mar '13

On 03/12/2013 04:23 PM, lists-centos wrote: > > > ------------ Original Message ------------ >> Date: Tuesday, March 12, 2013 04:05:28 PM -0700 >> From: Emmett Culley <emmett(a)webengineer.com> >> To: centos(a)centos.org >> Cc: >> Subject: Re: [CentOS] Kernel panic after update to 6.4 >> >> On 03/12/2013 01:48 PM, Akemi Yagi wrote: >>> On Tue, Mar 12, 2013 at 1:41 PM, Emmett Culley >>> <emmett(a)webengineer.com> wrote: >>>> After successfully updating three CentOS 6.3 VM guests to 6.4 I >>>> decided to update the host as well. And it failed to boot. >>>> >>>> Kernel panic - Not syncing: Attempted to kill init! >>>> Pid: 1, comm: init not tainted: 2.6.32-358.2.1.el6.x86_64 #1 >>> >>> At the time of this writing, CentOS kernel 2.6.32-358.2.1.el6 is >>> not out yet. Where did you get this one from ??? Did you build it >>> yourself? >>> >>> Akemi >> >> I did yum update --enablerepo=epel. I just checked and it appears >> that kernel was from the updates repo: >> >> [~]# yum list kernel >> Installed Packages >> kernel.x86_64 2.6.32-279.9.1.el6 @updates >> kernel.x86_64 2.6.32-279.14.1.el6 @updates >> kernel.x86_64 2.6.32-279.19.1.el6 @updates >> kernel.x86_64 2.6.32-279.22.1.el6 @updates >> kernel.x86_64 2.6.32-358.0.1.el6 @updates >> >> [~]# rpm -qa |grep kernel >> abrt-addon-kerneloops-2.0.8-15.el6.centos.x86_64 >> kernel-2.6.32-279.19.1.el6.x86_64 >> dracut-kernel-004-303.el6.noarch >> kernel-devel-2.6.32-279.14.1.el6.x86_64 >> kernel-2.6.32-279.14.1.el6.x86_64 >> kernel-devel-2.6.32-279.22.1.el6.x86_64 >> kernel-headers-2.6.32-358.0.1.el6.x86_64 >> kernel-firmware-2.6.32-358.0.1.el6.noarch >> kernel-2.6.32-358.0.1.el6.x86_64 >> kernel-devel-2.6.32-279.19.1.el6.x86_64 >> kernel-devel-2.6.32-358.0.1.el6.x86_64 >> kernel-2.6.32-279.9.1.el6.x86_64 >> libreport-plugin-kerneloops-2.0.9-15.el6.centos.x86_64 >> kernel-2.6.32-279.22.1.el6.x86_64 >> kernel-devel-2.6.32-279.9.1.el6.x86_64 >> >> This is from a VM that succeeded with the update to the "359" >> kernel. There are three more like that. >> >> Emmett >> > > You are giving conflicting information. > > You indicated that the kernel that you are getting the panic on is: > > >> Kernel panic - Not syncing: Attempted to kill init! > >> Pid: 1, comm: init not tainted: 2.6.32-358.2.1.el6.x86_64 #1 > > i.e., ...358.2.1 > > What you are showing as available from @updates and installed in the > VM that is working is: > > kernel.x86_64 2.6.32-358.0.1.el6 @updates > > kernel-2.6.32-358.0.1.el6.x86_64 > > i.e., ...358.0.1 > > > RedHat released ...358.2.1 earlier today, but I haven't seen centos > announce its release yet, and it's not available from the centos > repositories as of a few moments ago. So, the VM that is ok is using > ...358.0.1, the centos released kernel. The one that is panic would > appear to have come from elsewhere. > > Also note, it's the "358", not "359" kernel: > > > This is from a VM that succeeded with the update to the "359" > > kernel. There are three more like that. Yes, kernel "358". the "359" was a typo. And... the kernel panic lines were transcribed for a photo I took of the screen after the failed boot. On second look I see that the version is 2.6.32-358.0.1.el6.x86_64. So let's start again. Kernel panic - Not syncing: Attempted to kill init! Pid: 1, comm: init not tainted: 2.6.32-358.0.1.el6.x86_64 #1 After yum upgrade --enablerepo=epel on two of five machines, one of which is the host for the three VM's that succeeded and the one that failed, just as the host. I have a screen shot of that VM's boot failure, but I don't know the proper way to include it in a post. I've uninstalled that kernel and ran yum upgrade again, it still fails on that kernel, on both the host and the VM. I suppose the good thing is that it happened on a VM guest that is not critical, so I don't have to experiment with the host that has four important guests running on it. Any ideas? Emmett

6 16

CentOS-announce Digest, Vol 97, Issue 9
by centos-announce-request＠centos.org 16 Mar '13

16 Mar '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. qaweb.dev.centos.org is now gone (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Fri, 15 Mar 2013 13:35:15 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] qaweb.dev.centos.org is now gone To: CentOS Announcements List <centos-announce(a)centos.org> Message-ID: <51432393.1000404(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, It started off by being a great place to share qa content and let people track progress. But over the years, and with every passing release, its become lesser and lesser important. As of today, qaweb.dev.centos.org is now deprecated and is being decomissioned. The url will still respond and redirect people to a page that explains the situation. In the mean time, we are kicking off a stream of efforts to try and get better test coverage, more automation, more frequent test runs and above all - better communication to everyone on what the test results are, while further dropping the barriers for people to come along and write tests, help us push better code. Two efforts currently underway are getting a status like page online, that also shows recent history ( ref: http://lists.centos.org/pipermail/centos-devel/2013-March/009099.html ) and getting the Linux test project content included in the regular test suite that we run ( ref: http://ltp.sourceforge.net/ and http://lists.centos.org/pipermail/centos-devel/2013-March/009099.html ) How can you help ? Drop in on those conversations and talk to us, help us put in place the best possible solution. Contribute time by helping write more kickstart files, contribute tests and maybe even setup a test run environment in your facility that feeds back restults to our status tracker! Lots of opportunities for people to get involved with the CentOS QA and Development process. And as always, we are here to help with answers to questions or concerns you might have. Look at the http://wiki.centos.org/GettingHelp page for details on how you can engage with everyone else in the CentOS Community. Regards, - -- Karanbir Singh, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlFDI5MACgkQMA29nj4Tz1uBOgCfZuC+MYuNuWAybChPAPgVu90/ 9KkAoLdWbsU7iFm+tHihMgerjvWCiuDj =ZZqP -----END PGP SIGNATURE----- ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 97, Issue 9 **********************************************

1 0

important spamassassin update
by Helmut Drodofsky 16 Mar '13

16 Mar '13

Hello, njab.org will discontinue blacklist services. On 1. March 2013 Apache published: Bug 6913; Disabled rules/scores for njabl.org See: http://svn.apache.org/viewvc?view=revision&revision=1451776 Will there be an update from CentOS? Best regards Helmut Drodofsky -- Viele Grüße Helmut Drodofsky Internet XS Service GmbH Heßbrühlstraße 15 70565 Stuttgart Geschäftsführung Dr.-Ing. Roswitha Hahn-Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Tel. 0711 781941 0 Fax: 0711 781941 79 Mail: info(a)internet-xs.de www.internet-xs.de

2 1

Fwd: atheros wifi on my oqo2
by SilverTip257 15 Mar '13

15 Mar '13

---------- Forwarded message ---------- From: SilverTip257 <silvertip257(a)gmail.com> Date: Fri, Mar 15, 2013 at 7:51 PM Subject: Re: [CentOS] atheros wifi on my oqo2 To: Robert Moskowitz <rgm(a)htt-consult.com> On Fri, Mar 15, 2013 at 5:07 PM, Robert Moskowitz <rgm(a)htt-consult.com>wrote: > > On 03/14/2013 07:09 PM, SilverTip257 wrote: > >> On Thu, Mar 14, 2013 at 4:27 PM, Robert Moskowitz <rgm(a)htt-consult.com >> >wrote: >> >> Ugh I clicked reply rather than reply-all on your message that was also >> sent directly to me. >> Back on the list we go. :) >> >> >> On 03/14/2013 12:33 PM, SilverTip257 wrote: >>> >>> On Wed, Mar 13, 2013 at 9:53 PM, Robert Moskowitz <rgm(a)htt-consult.com >>> >wrote: >>> >>> On 03/13/2013 11:17 AM, SilverTip257 wrote: >>>> >>>> On Wed, Mar 13, 2013 at 9:48 AM, Robert Moskowitz <rgm(a)htt-consult.com >>>>> >>>>>> wrote: >>>>>> >>>>> I have a few oqo2 units that I use for testing, normally using the >>>>> >>>>>> dongle for ethernet connection. Well supposedly they have atheros >>>>>> wifi. in dmseg I see: >>>>>> >>>>>> OT: Looks like a pretty neat device. >> http://www.youtube.com/watch?**v=gt84OKzFQis<http://www.youtube.com/watch?v=gt84OKzFQis> >> > > Yes it is. I had 4, but one is misplaced. But I can't get the internal > video working with any Linux I have tried, I have to use an external > monitor or just run it as a headless server. It makes a great headless > server for a portable LAN. Would love to get a GUI working on it though. > > Oh... So it's no video and no Atheros wifi. Puppy Linux on OQO 02 http://www.youtube.com/watch?v=bG28KsIQHm0 Debian on OQO 01 not your model, but might be helpful ... who knows http://jamie.lentin.co.uk/computers/oqo-01plus/ OQO Oasis - OQO 2 Linux forum http://forum.oqoasis.com/forumdisplay.php?10-Linux > > >> >> ath5k 0000:03:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>>>> ath5k 0000:03:04.0: registered as 'phy0' >>>>>> ath5k phy0: Couldn't identify radio revision. >>>>>> ath5k 0000:03:04.0: PCI INT A disabled >>>>>> >>>>>> I press magic <fnc-?> per http://www.expansys.com/ft.**aspx?k=119902<http://www.expansys.com/ft.aspx?k=119902>but >>>>>> NetworkManager is not adding wifi as a networking device. There is no >>>>>> file under /etc/sysconfig/network-**scripts/ifc-* either. How can I >>>>>> get >>>>>> the wifi working? >>>>>> >>>>>> Does the Atheros device show up in the output of ifconfig? >>>>>> >>>>> ifconfig -a >>>>> >>>>> Only eth0 and lo >>>> >>>> >>>> If it does, check the output of iwconfig. >>>> And of course nothing here. >>>> >>>> If neither of those yield any success, dig into the output of lspci >>>> for >>>> >>>>> info on the Ath device. >>>>> lspci -v >>>>> lspci -v | grep -A10 -B2 thernet >>>>> >>>>> with verbosity turne up another notch if you want more info >>>>> lspci -vv | grep -A10 -B2 thernet >>>>> >>>>> # lspci -vv | grep -A10 -B2 thernet >>>> Kernel modules: snd-hda-intel >>>> >>>> 03:04.0 Ethernet controller: Atheros Communications Inc. AR5413/AR5414 >>>> Wireless Network Adapter [AR5006X(S) 802.11abg] (rev 01) >>>> >>>> What version of CentOS? 6.4? >>> >>> >>> Still 6.3. I am going to rebuild on one of them tomorrow (or maybe >>> tonight) to 6.4. >>> >>> >>> You might try an install of Fedora instead (as I suggest at the bottom >> of >> this message) and try a newer kernel. Maybe you'll end up using the >> CentOS >> base and need to build a newer kernel yourself to have the proper driver >> for that Atheros chip. Since that unit will probably not be an >> Internet-facing host, you can run a custom kernel without any drawbacks. >> >> Since CentOS 6.[34] is running a 2.6.32 kernel, I don't know that I place >> much belief in this information [0] (see post #4) helping. And this >> poster's Atheros is an AR5001. >> >> [0] http://ubuntuforums.org/**showthread.php?t=1350358&p=**8475659<http://ubuntuforums.org/showthread.php?t=1350358&p=8475659> >> >> >> >>> By chance have you tried probing the driver by manually to test? >>> modprobe ath5k >>> lsmod | grep ath >>> >>> >>> ath5k 129334 0 >>> ath 14106 1 ath5k >>> mac80211 184028 1 ath5k >>> cfg80211 157313 3 ath5k,ath,mac80211 >>> >>> ifconfig -a >>> >>> >>> And still only eth0 and lo listed. >>> >>> I looked into messages and picked out the following: >>> >>> Mar 11 01:37:17 oqo2 kernel: ath5k 0000:03:04.0: PCI INT A -> GSI 17 >>> (level, low) -> IRQ 17 >>> Mar 11 01:37:17 oqo2 kernel: ath5k 0000:03:04.0: registered as 'phy0' >>> Mar 11 01:37:17 oqo2 kernel: ath5k phy0: Couldn't identify radio >>> revision. >>> Mar 11 01:37:17 oqo2 kernel: ath5k 0000:03:04.0: PCI INT A disabled >>> >>> Perhaps this is my problem? >>> >>> >>> Yes. >> > > I just boot F18 with LXDE, as the oqo will not boot of (at least my) DVD > drive. Only CD. And it comes up with even the external video blank. But > alt-ctl-F2 gets me a root login and in messages I see similar lines (can't > upload them becase...) > > I see the registered as 'phy0' and the next line says "unalbe to init > EEPROM". The last that the probe failed with error -5 > > So this is rather bad. Time for a bug report? > > Or at least find somebody who has Linux on an oqo2. Use lspci to figure out what integrated graphics card it has and search for Linux support of that chipset. On the topic of the wireless, search around your favorite search engine. You may have to contact the Madwifi project or whomever's driver you're using. http://www.redhat.com/archives/rhl-list/2008-October/msg02500.html modinfo ath5k > > >> >> >>> You might also try the tips listed here: >>> http://wiki.centos.org/HowTos/**Laptops/Wireless<http://wiki.centos.org/HowTos/Laptops/Wireless> >>> >>> >>> Nothing helpful there. ath5k should just work. >>> >>> >>> Agreed. >> >> You may end up checking change logs for kernel versions. :-/ >> > > F18 live CD iso. > > > >> >> >>> Check modprobe's blacklist config for kicks. >>> >>> Being an Atheros card I'd expect it to be rather well supported. >>> >>> >>> Subsystem: Atheros Communications Inc. EnGenius EMP-8602 (400mw) or >>>> Compex WLM54AG (SuperAG) >>>> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Interrupt: pin A routed to IRQ 17 >>>> Region 0: Memory at c2100000 (32-bit, non-prefetchable) [size=64K] >>>> Capabilities: [44] Power Management version 2 >>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA >>>> PME(D0-,D1-,D2-,D3hot-,D3cold-**) >>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- >>>> Kernel modules: ath5k >>>> >>>> 03:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >>>> RTL-8139/8139C/8139C+ (rev 10) >>>> Subsystem: Atheros Communications Inc. Device 8139 >>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >>>> Stepping- SERR- FastB2B- DisINTx- >>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >>>> <TAbort- <MAbort- >SERR- <PERR- INTx- >>>> Latency: 32 (8000ns min, 16000ns max) >>>> Interrupt: pin A routed to IRQ 18 >>>> Region 0: I/O ports at bc00 [size=256] >>>> Region 1: Memory at c2110000 (32-bit, non-prefetchable) [size=256] >>>> Capabilities: [50] Power Management version 2 >>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >>>> PME(D0-,D1+,D2+,D3hot+,D3cold+**) >>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >>>> >>>> I checked in the bios that the card is enabled. The keyboard indicates >>>> that the function key function of the / key is to turn on the radio. >>>> >>>> >>>> So the hardware switch has the radio turned on? Is there an >>>> indicator? >>>> >>> >>> No indicator. That is part of the problem. All I can do is press the >>> fun >>> key (which is 'sticky' by default and has a little led to show it is >>> activated), then press the ? (that has the radio icon in the place where >>> the keys show what they do with the fun key), then the led goes off on >>> the >>> fun key. For other such combinations, you get what the key shows. >>> >>> >>> Have you tested the hardware with any other OS or distro so we know >>> it's >>> known good hardware? >>> >>> >>> No. I would have to dig out the base XP CD and install that. >>> >>> >>> >>> You might also consider booting Fedora on it temporarily since you'll >> have >> a much newer kernel. >> > > Would my Centos kickstart work for Fedora? Or do I have to do a fedora > install then copy the anaconda.cfg? > > > Never tried that myself. I'd expect some package names would differ slightly, but partitioning and what not would be compatible. -- ---~~.~~--- Mike // SilverTip257 // -- ---~~.~~--- Mike // SilverTip257 //

1 0

Re: [CentOS] atheros wifi on my oqo2
by SilverTip257 15 Mar '13

15 Mar '13

On Thu, Mar 14, 2013 at 4:27 PM, Robert Moskowitz <rgm(a)htt-consult.com>wrote: Ugh I clicked reply rather than reply-all on your message that was also sent directly to me. Back on the list we go. :) > On 03/14/2013 12:33 PM, SilverTip257 wrote: > > On Wed, Mar 13, 2013 at 9:53 PM, Robert Moskowitz <rgm(a)htt-consult.com>wrote: > >> >> On 03/13/2013 11:17 AM, SilverTip257 wrote: >> >>> On Wed, Mar 13, 2013 at 9:48 AM, Robert Moskowitz <rgm(a)htt-consult.com >>> >wrote: >>> >>> I have a few oqo2 units that I use for testing, normally using the >>>> dongle for ethernet connection. Well supposedly they have atheros >>>> wifi. in dmseg I see: >>>> >>> OT: Looks like a pretty neat device. http://www.youtube.com/watch?v=gt84OKzFQis > >>>> ath5k 0000:03:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 >>>> ath5k 0000:03:04.0: registered as 'phy0' >>>> ath5k phy0: Couldn't identify radio revision. >>>> ath5k 0000:03:04.0: PCI INT A disabled >>>> >>>> I press magic <fnc-?> per http://www.expansys.com/ft.aspx?k=119902 but >>>> NetworkManager is not adding wifi as a networking device. There is no >>>> file under /etc/sysconfig/network-scripts/ifc-* either. How can I get >>>> the wifi working? >>>> >>>> Does the Atheros device show up in the output of ifconfig? >>> ifconfig -a >>> >> >> Only eth0 and lo >> >> >> If it does, check the output of iwconfig. >>> >> >> And of course nothing here. >> >> If neither of those yield any success, dig into the output of lspci for >>> info on the Ath device. >>> lspci -v >>> lspci -v | grep -A10 -B2 thernet >>> >>> with verbosity turne up another notch if you want more info >>> lspci -vv | grep -A10 -B2 thernet >>> >> >> # lspci -vv | grep -A10 -B2 thernet >> Kernel modules: snd-hda-intel >> >> 03:04.0 Ethernet controller: Atheros Communications Inc. AR5413/AR5414 >> Wireless Network Adapter [AR5006X(S) 802.11abg] (rev 01) >> > > What version of CentOS? 6.4? > > > Still 6.3. I am going to rebuild on one of them tomorrow (or maybe > tonight) to 6.4. > > You might try an install of Fedora instead (as I suggest at the bottom of this message) and try a newer kernel. Maybe you'll end up using the CentOS base and need to build a newer kernel yourself to have the proper driver for that Atheros chip. Since that unit will probably not be an Internet-facing host, you can run a custom kernel without any drawbacks. Since CentOS 6.[34] is running a 2.6.32 kernel, I don't know that I place much belief in this information [0] (see post #4) helping. And this poster's Atheros is an AR5001. [0] http://ubuntuforums.org/showthread.php?t=1350358&p=8475659 > > > By chance have you tried probing the driver by manually to test? > modprobe ath5k > lsmod | grep ath > > > ath5k 129334 0 > ath 14106 1 ath5k > mac80211 184028 1 ath5k > cfg80211 157313 3 ath5k,ath,mac80211 > > ifconfig -a > > > And still only eth0 and lo listed. > > I looked into messages and picked out the following: > > Mar 11 01:37:17 oqo2 kernel: ath5k 0000:03:04.0: PCI INT A -> GSI 17 > (level, low) -> IRQ 17 > Mar 11 01:37:17 oqo2 kernel: ath5k 0000:03:04.0: registered as 'phy0' > Mar 11 01:37:17 oqo2 kernel: ath5k phy0: Couldn't identify radio revision. > Mar 11 01:37:17 oqo2 kernel: ath5k 0000:03:04.0: PCI INT A disabled > > Perhaps this is my problem? > > Yes. > > > You might also try the tips listed here: > http://wiki.centos.org/HowTos/Laptops/Wireless > > > Nothing helpful there. ath5k should just work. > > Agreed. You may end up checking change logs for kernel versions. :-/ > > > Check modprobe's blacklist config for kicks. > > Being an Atheros card I'd expect it to be rather well supported. > > >> Subsystem: Atheros Communications Inc. EnGenius EMP-8602 (400mw) or >> Compex WLM54AG (SuperAG) >> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Interrupt: pin A routed to IRQ 17 >> Region 0: Memory at c2100000 (32-bit, non-prefetchable) [size=64K] >> Capabilities: [44] Power Management version 2 >> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA >> PME(D0-,D1-,D2-,D3hot-,D3cold-) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- >> Kernel modules: ath5k >> >> 03:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. >> RTL-8139/8139C/8139C+ (rev 10) >> Subsystem: Atheros Communications Inc. Device 8139 >> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- >> Stepping- SERR- FastB2B- DisINTx- >> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- >> <TAbort- <MAbort- >SERR- <PERR- INTx- >> Latency: 32 (8000ns min, 16000ns max) >> Interrupt: pin A routed to IRQ 18 >> Region 0: I/O ports at bc00 [size=256] >> Region 1: Memory at c2110000 (32-bit, non-prefetchable) [size=256] >> Capabilities: [50] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA >> PME(D0-,D1+,D2+,D3hot+,D3cold+) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >> >> I checked in the bios that the card is enabled. The keyboard indicates >> that the function key function of the / key is to turn on the radio. >> >> >> So the hardware switch has the radio turned on? Is there an indicator? > > > No indicator. That is part of the problem. All I can do is press the fun > key (which is 'sticky' by default and has a little led to show it is > activated), then press the ? (that has the radio icon in the place where > the keys show what they do with the fun key), then the led goes off on the > fun key. For other such combinations, you get what the key shows. > > > Have you tested the hardware with any other OS or distro so we know it's > known good hardware? > > > No. I would have to dig out the base XP CD and install that. > > > You might also consider booting Fedora on it temporarily since you'll have a much newer kernel. -- ---~~.~~--- Mike // SilverTip257 //

2 1

Re: [CentOS] UC OT: A lightweight monitor software
by Rushton Martin 15 Mar '13

15 Mar '13

We run ganglia on a 35 node cluster (plus a few odds and ends). It seems pretty lightweight. I've just finished installing the latest versions at home on old slow 32-bit kit and it seems again to be very lightweight. You will need to install libconfuse and RRD though, the former comes as a tarball. You'll need to configure/make/make install and then tell yum to ignore the missing dependency. Regards, Martin -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Karanbir Singh Sent: 15 March 2013 16:46 To: CentOS mailing list Subject: Re: [CentOS] OT: A lightweight monitor software On 03/15/2013 07:39 AM, C. L. Martinez wrote: > Hi all, > > I have a test lab installed over an ESXi 5.1 host that contains 5 > CentOS vm guests. I would like to monitor CPU, RAM and Network for > these vm and ESXi host. Zabbix and Nagios are too to accomplish this > task. Does anyone know any lightweight openosurce soft to do this?? you already have some great answers, but I want to throw in another susggestio : ganglia. Its provided in rpm form at EPEL ( including ganglia-web ), and if you have a trusted network, and multicast is considered ok - you wont need to do any config beyond install, and make 2 config changes in the main /etc/ganglia/gmond.conf file on each of the nodes -- Karanbir Singh, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. QinetiQ may monitor email traffic data and also the content of email for the purposes of security. QinetiQ Limited (Registered in England & Wales: Company Number: 3796233) Registered office: Cody Technology Park, Ively Road, Farnborough, Hampshire, GU14 0LX http://www.qinetiq.com.

1 0

Postfix/Amavisd/Clamd - Mail send failing
by Austin Einter 15 Mar '13

15 Mar '13

Dear All With help from you all I am now at better stage. Special thanks to Robert. Atleast I am able to run all the required services (postfix, amavisd, clamd etc). I sent a mail from my gmail, I received at my newly setup domain/mailbox. I am facing issue while sending the mail outside. >From maillog I realized, two issues are there. *1. Virus scan failed. The error log is as below * *Mar 14 18:49:55 ip-173-201-189-43 amavis[3325]: (03325-01) (!)run_av (ClamAV-clamd) FAILED - unexpected , output="/var/spool/amavisd/tmp/amavis-20130314T184955-03325-nFS5UJ4F/parts: lstat() failed: Permission denied. ERROR\n" Mar 14 18:49:55 ip-173-201-189-43 amavis[3325]: (03325-01) (!)ClamAV-clamd av-scanner FAILED: CODE(0x19c3ec0) unexpected , output="/var/spool/amavisd/tmp/amavis-20130314T184955-03325-nFS5UJ4F/parts: lstat() failed: Permission denied. ERROR\n" at (eval 113) line 897. Mar 14 18:49:55 ip-173-201-189-43 amavis[3325]: (03325-01) (!)WARN: all primary virus scanners failed, considering backups * *2. Looks destination network not reachable (probably here gmail's mail server)* * Mar 14 18:49:58 ip-173-201-189-43 amavis[3325]: (03325-01) FWD from < bhanu(a)netcloudjobs.com> -> <austin.einter(a)gmail.com>,BODY=7BIT 250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 1AE0E38A0D3E Mar 14 18:49:58 ip-173-201-189-43 postfix/error[3384]: 1AE0E38A0D3E: to=< austin.einter(a)gmail.com>, relay=none, delay=0.02, delays=0.01/0.01/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:4002:c04::1a]:25: Network is unreachable) Mar 14 18:49:58 ip-173-201-189-43 amavis[3325]: (03325-01) Passed CLEAN {RelayedOutbound}, MYNETS LOCAL [127.0.0.1]:46504 [127.0.0.1] < bhanu(a)netcloudjobs.com> -> <austin.einter(a)gmail.com>, Message-ID: < bd17726f3d35c7980426e4a55566cf79(a)netcloudjobs.com>, mail_id: T8Zt2QE1Eico, Hits: -1, size: 805, queued_as: 1AE0E38A0D3E, 2885 ms * Is it a dns issue. Why my mail server is saying "*delivery temporarily suspended: connect to alt2.gmail-smtp-in.l.google.com[2607:f8b0:4002:c04::1a]:25: Network is unreachable)*". Kindly guide me to solve these 2 issues. Best regards Austin

3 8

← Newer
1
...
7
8
9
10
11
12
13
...
23
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss March 2013