Discuss July 2013

discuss@lists.centos.org

167 participants
150 discussions

Start a nNew thread

CentOS-announce Digest, Vol 101, Issue 19
by centos-announce-request＠centos.org 31 Jul '13

31 Jul '13

1 0

What on Centos is wiping out my eth0 IP address every 5 minutes?
by Rock 31 Jul '13

31 Jul '13

QUESTION: Why does my Centos 6.4 laptop keep wiping out my eth0 IP address? SUMMARY: a) I set the IP address of eth0 b) Everything works fine for 2 to 5 minutes c) Then, that eth0 IP address is (somehow?) wiped out I frustratingly repeat that abc process (over and over and over again) BACKGROUND: My home network has been working perfectly and there is no problem with my home network, nor my wlan0 WiFi access from my Centos laptop to that home broadband network. Inside the house, I never use the wired (eth0) NIC; but, I'm trying to set up a wired/wireless connection outside the house and that is where I'm running into this problem where Centos (automatically?) constantly and repeatedly wipes out the IP address I set on eth0. I can easily (constantly) change the IP address of the eth0 NIC back to what I want it to be; but that IP address only stays set for about 2 to 5 minutes; and then it wipes itself out (again & again). Why? How do I stop this? (All I want is for eth0 to *stay* at the IP address I set it to!) To give you more contextual detail, here's a typical sequence. SIMPLE BASELINE: Wireless NIC (wlan0) is turned off using a hardware switch on the outside of the laptop (so that only one NIC is in play). STARTING POINT: (eth0 has no IP address) $ ifconfig eth0 => eth0 Link encap:Ethernet HWaddr A0:BE:C1:D8:E5:F1 => inet6 addr: fe80::f2de:f1ff:fe38:8591/64 Scope:Link => UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 => RX packets:3139 errors:0 dropped:0 overruns:0 frame:0 => TX packets:3230 errors:0 dropped:0 overruns:0 carrier:0 => collisions:0 txqueuelen:1000 => RX bytes:2403080 (2.2 MiB) TX bytes:547895 (535.0 KiB) => Interrupt:20 Memory:f2600000-f2620000 I EASILY CAN SET THE IP ADDRESS of eth0: $ sudo ifconfig eth0 192.168.1.100 $ ifconfig eth0 => eth0 Link encap:Ethernet HWaddr A0:BE:C1:D8:E5:F1 => inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 => inet6 addr: fe80::f2de:f1ff:fe38:8591/64 Scope:Link => UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 => etc. At this point, I can now connect a wire from the RJ45 port of the laptop, to the device (which happens to be a radio set to 192.168.1.20): $ ping 192.168.1.20 => PING 192.168.1.20 (192.168.1.20) 56(84) bytes of data. => 64 bytes from 192.168.1.20: icmp_seq=1 ttl=64 time=1.38 ms => 64 bytes from 192.168.1.20: icmp_seq=2 ttl=64 time=0.339 ms => 64 bytes from 192.168.1.20: icmp_seq=3 ttl=64 time=0.255 ms ^C => --- 192.168.1.20 ping statistics --- => 3 packets transmitted, 3 received, 0% packet loss, time 2954ms => rtt min/avg/max/mdev = 0.255/0.660/1.388/0.516 ms I can even easily connect via port 80 (using Firefox on the laptop) to this device, e.g., $ firefox http://192.168.1.20 In fact, time and time (and time) again, everything works just fine, for about 2 to 5 minutes, until, invariably, I lose all connectivity! What seems to happen is that CentOS wipes out my IP address that I had set for eth0. So, I lose all connectivity. $ ifconfig eth0 => eth0 Link encap:Ethernet HWaddr A0:BE:C1:D8:E5:F1 => inet6 addr: fe80::f2de:f1ff:fe38:8591/64 Scope:Link => UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 I can repeat the process, and everything works again, for about 2 to 5 minutes. Then I lose my eth0 IP address again. WHAT I WANT: When I set eth0 to an IP address, I want eth0 to *stay* at that IP address! My question: Q: Why does setting an eth0 IP address only last about 5 minutes on Centos? What am I doing wrong? What can I do to *keep* the IP address on eth0 that I set for eth0?

10 34

kio_http spawns multiple processes
by Kwan Lowe 31 Jul '13

31 Jul '13

Hello All: I've narrowed an earlier issue down to a problem with kio_http. This one is much easier to reproduce: In a KDE session, open Konsole terminal. In the Konsole session, type a bogus web address. E.g.: http://magoo.ca Right click the link and select "Open Link" In a few seconds you should get multiple notifications on the desktop and several kio_http processes spawned. This notifications keeps on arriving until a "killall kio_http" is issued.

1 0

Interesting admin info: ipmitool
by m.roth＠5-cent.us 30 Jul '13

30 Jul '13

I've used ipmitool any number of times, but never for more than getting info, or setting the server name on a Dell LCD screen. However, I had a server screaming about intruder alert, intruder alert, er, "Chassis intrusion detected", and I thought there might be a way to shut it up (this after pulling the server and reseating the lid). A quick google found, on the first page, an 8 page document by Dell called "Managing Dell PowerEdge Servers Using IPMItool". It's clear, comprehensible, has links to the ipmitool project, and to the IPMI standard, which has documentation on calls and parameters. It also has some examples... including "How to turn off intrusion detected events".... Other than the device ID being different on my Penguin than on a Dell PE, it was completely accurate... and it worked. A bit scary - I didn't want to turn off everything, or brick the server, but it worked as advertised. So, push that onto your stack for the time when you need it, folks. mark

3 6

How does such long term support work?
by Patrick 30 Jul '13

30 Jul '13

I've had nothing but trouble with BSD/Linux over the past year or so. I've been on Centos 6.4 for about a half day now and I am loving it. I am just wondering though, how does a 7 year support cycle work? I see that there is libreoffice which is kinda new. Is this because open office is under oracle's influence? I am on gnome 2 right now, will I wake up one day in the next 7 years to gnome 3 ? I really don't want to. Will I just have gnome 2 + bug fixes? If so how does the community do this if the gnome people drop support for gnome 2. Thanks-Patrick

8 8

How to know hardware RAID failure
by Mihamina Rakotomandimby 30 Jul '13

30 Jul '13

Hi, We have on an old Dell 2850 with 4 SCSI drives, where we put a Hardware RAID5 on 3 disks and left 1 as spare. I dont remember exactly, but the RAID was setup in the BIOS, and when installing CentOS6, I just saw "1 drive". If it was software RAID, disk failure could be seen in /proc/mdastat, and I could simulate failure with mdadm. As far as it is hardware ATM, how, at least, to know the state of the RAID array? (syncing, healthy,...) Thank you. -- RMA.

7 7

CentOS-announce Digest, Vol 101, Issue 18
by centos-announce-request＠centos.org 30 Jul '13

30 Jul '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1109 CentOS 6 xorg-x11-drv-mga Update (Johnny Hughes) 2. CEBA-2013:1112 CentOS 6 net-snmp Update (Johnny Hughes) 3. CESA-2013:1114 Important CentOS 6 bind Update (Johnny Hughes) 4. CESA-2013:1115 Important CentOS 5 bind97 Update (Johnny Hughes) 5. CEBA-2013:1118 CentOS 6 opencv FASTTRACK Update (Johnny Hughes) 6. CEBA-2013:1117 CentOS 6 python-urlgrabber FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 29 Jul 2013 11:53:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1109 CentOS 6 xorg-x11-drv-mga Update To: centos-announce(a)centos.org Message-ID: <20130729115332.GA3413(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1109 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1109.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9df43ddff609ec225962d24246dc6d1a4743761746779ba3b7d1ec65b290e3e8 xorg-x11-drv-mga-1.6.1-8.el6_4.i686.rpm x86_64: bd22fd85bc7729ffe7b18210c984f974d574a5a597e96506ca57c6ea51eb2458 xorg-x11-drv-mga-1.6.1-8.el6_4.x86_64.rpm Source: 0e57deef5e021482c49c8bebb11edce6354e4bb2171fd2b4d55d8cdc137189be xorg-x11-drv-mga-1.6.1-8.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 29 Jul 2013 15:04:56 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1112 CentOS 6 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20130729150456.GA23163(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1112 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1112.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 70519ea5efc82328b629f216b4183d89cc7b9a7943ce164cb8849608f3c4cd1c net-snmp-5.5-44.el6_4.3.i686.rpm 9f3307443db8a1616188bf60bab3458729c41c593b146cd77a84674bf2d064ef net-snmp-devel-5.5-44.el6_4.3.i686.rpm 25ab85790811157b9879022efc772fd5ef88645643f795d8d5e368bcd4b8a7aa net-snmp-libs-5.5-44.el6_4.3.i686.rpm 4310efac5a8084c8094b4bc02e2e0c094d88ab88815c3840918a3b786fdd6848 net-snmp-perl-5.5-44.el6_4.3.i686.rpm 98e62361f6270f9f0418a6affff1ac4048696a343887a0b08c2480e7d33c0e83 net-snmp-python-5.5-44.el6_4.3.i686.rpm 6b8ff28c472256a0c489a9f18ddd4e83ae422b0822726f13f458d4857c1713b1 net-snmp-utils-5.5-44.el6_4.3.i686.rpm x86_64: 3233c259ed3c516ffbfa86471953c6e3e6259e6f8bc6d5148d5d9498a7d5e6fe net-snmp-5.5-44.el6_4.3.x86_64.rpm 9f3307443db8a1616188bf60bab3458729c41c593b146cd77a84674bf2d064ef net-snmp-devel-5.5-44.el6_4.3.i686.rpm 9a75d2a89442822689d957bda5a9e0ca2e5644f49b7ab60fe7e6552c099c9721 net-snmp-devel-5.5-44.el6_4.3.x86_64.rpm 25ab85790811157b9879022efc772fd5ef88645643f795d8d5e368bcd4b8a7aa net-snmp-libs-5.5-44.el6_4.3.i686.rpm fc60db91a959731f2550f36c4703e3c544ed0cc4a168dc05601848cff15f8093 net-snmp-libs-5.5-44.el6_4.3.x86_64.rpm 57aca348bdbc2b69f159661360eca1f7bee2dcf41712f5efb1139f53d37f0fee net-snmp-perl-5.5-44.el6_4.3.x86_64.rpm 12fd3e047a6fe45aa0885b1873e44b7b913151c02c7227651fb6e606766bbc45 net-snmp-python-5.5-44.el6_4.3.x86_64.rpm 391ba506926a145c450b78c94d68a4167a3b5110940f382baec126f35d595be9 net-snmp-utils-5.5-44.el6_4.3.x86_64.rpm Source: 3df0e53ac945d04bc6493dbceaa1347192d318c507e19a7d851cf0770c42946c net-snmp-5.5-44.el6_4.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 30 Jul 2013 04:35:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1114 Important CentOS 6 bind Update To: centos-announce(a)centos.org Message-ID: <20130730043538.GA49030(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1114 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1114.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2cecf1ef3617a88c4d73ed9e5c5000702408dd8873f3a2b59bdfaf113d5e4d14 bind-9.8.2-0.17.rc1.el6_4.5.i686.rpm 8f6d3e6d9c23456debb8ca623bfe0fe3d2e29fde67b5db64b3e6b4c25191e7e0 bind-chroot-9.8.2-0.17.rc1.el6_4.5.i686.rpm 32a365e12c1d5537867982d18715f9d69fa31ec746f14b4ace4d73f576c57146 bind-devel-9.8.2-0.17.rc1.el6_4.5.i686.rpm 3221984e7500cebca31518ca679b8fff5d97542fb188f6e98b462eaafefb8db2 bind-libs-9.8.2-0.17.rc1.el6_4.5.i686.rpm 9f76328995846ff950dffa91b1b0374c507613a15acfb7ff2403fd594c2a7056 bind-sdb-9.8.2-0.17.rc1.el6_4.5.i686.rpm 737422dd5bcad54cc32217a94b17de6a12068f3b7588e14bc5511c14a99ede23 bind-utils-9.8.2-0.17.rc1.el6_4.5.i686.rpm x86_64: 340ba0114a123f8e7362002202031a8c4bb72a89b4822f1380fd3fc56a74dd2d bind-9.8.2-0.17.rc1.el6_4.5.x86_64.rpm abeb1c0474d6a9dd14b06ab002f68a71afa79f27ec5482f00379f48947c2a2cb bind-chroot-9.8.2-0.17.rc1.el6_4.5.x86_64.rpm 32a365e12c1d5537867982d18715f9d69fa31ec746f14b4ace4d73f576c57146 bind-devel-9.8.2-0.17.rc1.el6_4.5.i686.rpm eb2ef371ccf99a859007cf448f55e0df42de6be953d77b37c6d71baf7b22b208 bind-devel-9.8.2-0.17.rc1.el6_4.5.x86_64.rpm 3221984e7500cebca31518ca679b8fff5d97542fb188f6e98b462eaafefb8db2 bind-libs-9.8.2-0.17.rc1.el6_4.5.i686.rpm 8215a47204fc8d0b0ead5acdacab2255b64a63a076d4fc231666266b334deee8 bind-libs-9.8.2-0.17.rc1.el6_4.5.x86_64.rpm c424699ef7210ad81dc93ed9521b6f986b620d56b1beb5e300a7ccb65eba62de bind-sdb-9.8.2-0.17.rc1.el6_4.5.x86_64.rpm c4c420fad53d83ed34a5ccd588b30726d0a45d75557c47917539f32c061c9df8 bind-utils-9.8.2-0.17.rc1.el6_4.5.x86_64.rpm Source: 0613587760b68d4ce3c0becd1cbe8281ddab224fdcbabff2b4d026ae01a14985 bind-9.8.2-0.17.rc1.el6_4.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 30 Jul 2013 04:50:14 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1115 Important CentOS 5 bind97 Update To: centos-announce(a)centos.org Message-ID: <20130730045014.GA19952(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1115 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1115.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 07353bfc8b4041910e8a0effc1dc60dd6761a95cfa778da02a5da474029c44ae bind97-9.7.0-17.P2.el5_9.2.i386.rpm 62b27079408913cb2437b0e2cdc482195ec8c990ae9c3d12fae24ccfeb0ba118 bind97-chroot-9.7.0-17.P2.el5_9.2.i386.rpm fd04d1d5c334233d14b5c8ae0e7a540371447f6028bcf43c972b2366c21fc0a5 bind97-devel-9.7.0-17.P2.el5_9.2.i386.rpm 2f287d608f0f555b92c5ba0524eededd3ead2ebc8c74cc9ed2f05ced0830ff47 bind97-libs-9.7.0-17.P2.el5_9.2.i386.rpm 7b6271db504a410a3a2092ba781d2d2703232b27953f87e8250ea8754bcee744 bind97-utils-9.7.0-17.P2.el5_9.2.i386.rpm x86_64: 9e3ae7f7c3bd6921ea8c8e215c63d1e4541821306e8a28f09f861070e6136baf bind97-9.7.0-17.P2.el5_9.2.x86_64.rpm 161e0bbd8ff3e64ac4f4fa85fea247bdb696865867856d20b04a8022ad8ae9d1 bind97-chroot-9.7.0-17.P2.el5_9.2.x86_64.rpm fd04d1d5c334233d14b5c8ae0e7a540371447f6028bcf43c972b2366c21fc0a5 bind97-devel-9.7.0-17.P2.el5_9.2.i386.rpm effe4b0436cd1abeb634f7ed5a09c755562527e5a527adedaf3d2a7551dd5526 bind97-devel-9.7.0-17.P2.el5_9.2.x86_64.rpm 2f287d608f0f555b92c5ba0524eededd3ead2ebc8c74cc9ed2f05ced0830ff47 bind97-libs-9.7.0-17.P2.el5_9.2.i386.rpm 5f66c754d1b817ed61fef76b202c78e60d55849acf28060526fb725893368e92 bind97-libs-9.7.0-17.P2.el5_9.2.x86_64.rpm 3b97d3edf6568400b8fdd0f860e4e431f920c319d15d3222078f54438b65c547 bind97-utils-9.7.0-17.P2.el5_9.2.x86_64.rpm Source: 5b8053329c3e5ad7562ef00100a4016505b78a614848be73c35522b1fc366d27 bind97-9.7.0-17.P2.el5_9.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 30 Jul 2013 11:01:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1118 CentOS 6 opencv FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130730110106.GA6271(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1118 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1118.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fb7055f2fcc955ae29a1a70cb4d2817c9c0844072cc6c4512b1dd2c07736ad65 opencv-2.0.0-12.el6.i686.rpm 112dab445e16aeed580a75a8ebea8a82b12f12fd6869a036f9b47f8de027171f opencv-devel-2.0.0-12.el6.i686.rpm 970386795a2beae78ab9536dea9ac3fe54acef4ac07c0966f2bfe3129baaf490 opencv-devel-docs-2.0.0-12.el6.noarch.rpm 322240955728dda1860a765469682d380dfae155e09d22b1c78e9bba6500b920 opencv-python-2.0.0-12.el6.i686.rpm x86_64: fb7055f2fcc955ae29a1a70cb4d2817c9c0844072cc6c4512b1dd2c07736ad65 opencv-2.0.0-12.el6.i686.rpm 524a2d9a1485e895f80a0e07cec981325807f167e4b2103ca46245dc43a7aefd opencv-2.0.0-12.el6.x86_64.rpm 112dab445e16aeed580a75a8ebea8a82b12f12fd6869a036f9b47f8de027171f opencv-devel-2.0.0-12.el6.i686.rpm 132bdfe48e9badd33b28dc2de6522a83ea32e0f7b12f0534aa3b47056fe1b03e opencv-devel-2.0.0-12.el6.x86_64.rpm 970386795a2beae78ab9536dea9ac3fe54acef4ac07c0966f2bfe3129baaf490 opencv-devel-docs-2.0.0-12.el6.noarch.rpm 92735ef59423ff2b009d0350fe8f2daf2cc30b64ecd1de96b23e8d4915e3a398 opencv-python-2.0.0-12.el6.x86_64.rpm Source: cf529d8d53401c9fde3d8f467d91b9d4a51891bf7aac347e484d3849ef1e7e9e opencv-2.0.0-12.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 30 Jul 2013 11:01:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1117 CentOS 6 python-urlgrabber FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130730110126.GA6360(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1117 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1117.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 25a65554c75a773913baf694c56382ecd7595a1d8d2af7704ef87a4a22046f77 python-urlgrabber-3.9.1-9.el6.noarch.rpm x86_64: 25a65554c75a773913baf694c56382ecd7595a1d8d2af7704ef87a4a22046f77 python-urlgrabber-3.9.1-9.el6.noarch.rpm Source: addfb96ce86adede7e9bb4313ee4c551795217a3762206d5189778bd448e5e98 python-urlgrabber-3.9.1-9.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 101, Issue 18 ************************************************

1 0

Update to Gnome 3
by AJH 30 Jul '13

30 Jul '13

Hello, just a little question: Exists a way to update the Gnome 2.28.1 out of box at Centos 6.4 to a Gnome 3? And if yes...how does this work? thanks a lot. -- thanks + bye ajh

9 13

how can I use Gstreamer 1.0 on CentOS 6
by Jerry Geis 29 Jul '13

29 Jul '13

Gstreamer depends on later glib and gtk that CentOS 6 does not have. Suggestions? Jerry

2 1

Tomboy on F12 to Gnote on Centos
by Steve Blackwell 28 Jul '13

28 Jul '13

I'm trying to convert my Tomboy notes from an old F12 system to Gnote on this CentOS 6 system. What I have found buy googling so far: - Tomboy notes used to be stored in $HOME/.tomboy - Some Tomboy upgrade moved them to $HOME/.local/share/.tomboy - Gnote stores its notes in $HOME/.local/share/gnote - Gnote has a Tomboy note converter add-in My Tomboy notes are in /home/steve/.tomboy so I had the old Tomboy system. I have the Tomboy add-in installed in Gnote I have tried copying my notes from $HOME/.tomboy to $HOME/.local/share/gnote and I have also tried copying them to $HOME/.local/share/tomboy but in either case I don't see them in gnote. Do I have a directory name wrong or is there some action needed to start the conversion? Thanks, Steve

2 4

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2013