Discuss August 2013

discuss@lists.centos.org

147 participants
142 discussions

Start a nNew thread

CentOS-announce Digest, Vol 102, Issue 7
by centos-announce-request＠centos.org 09 Aug '13

09 Aug '13

1 0

pppd + rp-pppoe: /sbin/ifup-local when ADSL re-up?
by Mihamina Rakotomandimby 09 Aug '13

09 Aug '13

Hi all, I set up an ADSL connection using rp-pppoe/pppoe-setup. The setting is to persist the connection, so that when the link goes down, it's re-up'd by pppd. The interface is "ppp0" and it appears "/sbin/ifup-local" is not called when re-uppping the ADSL link. It is a problem for me, as I have some routing tables which get cleared from the routes "via ppp0" when the ADSL is down and I need the routes to be added when "ppp0" is back. What's your suggestion in order to either launch "/sbin/ifup-local"or launch a script when "pppd" gets "ppp0" back? -- RMA.

1 0

Cisco DPC3825 - Web Server
by Fidel Dominguez 08 Aug '13

08 Aug '13

Friends I have the following Cisco DPC3825. Enter the settings and put in the DMZ web server that I have, but when I try to access it from another network I get the error code 504, which is the gateway problem. I can access the server via ssh without problems. Research on google for 3 days and can not find the solution to my problem. This router is different compared to the ones I had. The IP to access my router via web from the local network is 192.168.100.1, and the IP of the server I put in the DMZ is 192.168.0.17. No other information could you provide to clarify my problem. Sincerely Fidel Dominguez

3 5

forcing linux kernel 3 to recognize cdrom as hdX
by Oguz Yilmaz 08 Aug '13

08 Aug '13

Hello, I have a problem with older version of anaconda linux installer. I have upgraded kernel in my distro, but, when this anaconda boot with new 3.4.52 kernel, can NOT find cdrom. As far as I understand, this is because the new kernel recognize cd drive as srX, scdX instead of older hdX with 2.6.18. At the moment I can not upgrade anaconda and forced this kernel to recognize it as before. Are there any kernel command line argument, kernel config or something else for kernel 3.4.52 to recognize this cdrom as hdX? Best Regards, -- Oguz YILMAZ

5 7

Re: [CentOS] repoforge :: is it still active?
by Adrian Sevcenco 08 Aug '13

08 Aug '13

On 08/07/2013 08:27 PM, Reindl Harald wrote: > > > Am 07.08.2013 19:12, schrieb Adrian Sevcenco: >> On 08/07/2013 06:41 PM, Patrick Flaherty wrote: >>> They off up their SRC rpms right? Grab the .spec file and have a go at >> i already did this (for el6 - see below) .. i have the rpms, but at this >> moment would be for me too time consuming to learn how to make a repo > > what do you need to learn? > > * yum install createrepo > * createrepo /path/to/your/existing/rpms/ > * let point any httpd/ftpd server point to /path/to/your/rpms/ > * copy a .repo-file from /etc/yum.repos.d/ and modify it for your needs > > this does not take longer than 10 minutes at all thanks a lot!!! easier than i thought! Adrian

2 1

CentOS-announce Digest, Vol 102, Issue 6
by centos-announce-request＠centos.org 08 Aug '13

08 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1140 Critical CentOS 6 firefox Update (Karanbir Singh) 2. CESA-2013:1142 Important CentOS 5 thunderbird Update (Karanbir Singh) 3. CESA-2013:1144 Moderate CentOS 6 nss, nss-util, nss-softokn, and nspr Update (Karanbir Singh) 4. CEBA-2013:1146 CentOS 6 nss-pam-ldapd Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 7 Aug 2013 12:23:59 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1140 Critical CentOS 6 firefox Update To: centos-announce(a)centos.org Message-ID: <20130807122359.GA59387(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1140 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1140.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d606c6e6aec2aaf56e7dcf58fb90e08e10987186df4570e3fc39c27eb493cf08 firefox-17.0.8-1.el6.centos.i686.rpm f79b361189050266adf06e690280790980056bc8825824dbf2be4b015fc80040 xulrunner-17.0.8-3.el6.centos.i686.rpm 8df0546cb9fb6949a02ff39969f31ee6c9096537af871bb7f09ea25dbc33d5d0 xulrunner-devel-17.0.8-3.el6.centos.i686.rpm x86_64: d606c6e6aec2aaf56e7dcf58fb90e08e10987186df4570e3fc39c27eb493cf08 firefox-17.0.8-1.el6.centos.i686.rpm 766377ffe748104e1e85f0c4445742e72c0ef1bb25eba2e2f511bcde5878d99c firefox-17.0.8-1.el6.centos.x86_64.rpm f79b361189050266adf06e690280790980056bc8825824dbf2be4b015fc80040 xulrunner-17.0.8-3.el6.centos.i686.rpm ab5d8ca811a832e5518c3e577b217b95ba97e026f5de332cb9d807ee8f46d128 xulrunner-17.0.8-3.el6.centos.x86_64.rpm 8df0546cb9fb6949a02ff39969f31ee6c9096537af871bb7f09ea25dbc33d5d0 xulrunner-devel-17.0.8-3.el6.centos.i686.rpm f11a4a684c88fc91bec55d11656b7da167f560f24bc26419a16f62205f4d09b4 xulrunner-devel-17.0.8-3.el6.centos.x86_64.rpm Source: 430bb851de108431f8a4ba41dfe09775e5778e123ccd745e2b11d6759908e938 firefox-17.0.8-1.el6.centos.src.rpm b2eb74f446f3f783143cbde5323ef83068c4cacacdeb876e28af4c2e00016ace xulrunner-17.0.8-3.el6.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 7 Aug 2013 20:14:12 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1142 Important CentOS 5 thunderbird Update To: centos-announce(a)centos.org Message-ID: <20130807201412.GA7820(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1142 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1142.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0f42911c5588336dc341f9eedb47111e15d902c89812e4c9509981ecd524a964 thunderbird-17.0.8-5.el5.centos.i386.rpm x86_64: 925fa770e515eb877055fe1977d2e81fadbd8e1b8abad1d6c6e39eddeb9db502 thunderbird-17.0.8-5.el5.centos.x86_64.rpm Source: 8fa005546557d77f963333d95cfc42c9c1160d23f60e1c2ab2a8a962c82fdbcf thunderbird-17.0.8-5.el5.centos.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 7 Aug 2013 22:22:50 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1144 Moderate CentOS 6 nss, nss-util, nss-softokn, and nspr Update To: centos-announce(a)centos.org Message-ID: <20130807222250.GA20860(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1144 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1144.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0f58d15d6a0701a653cdb2edb28c4637177a28205d4125a75b058401eb701638 nspr-4.9.5-2.el6_4.i686.rpm 4bfc730889575fbfd3d9e381b7795a932ef4e5934980373cb25e07a37345da86 nspr-devel-4.9.5-2.el6_4.i686.rpm 7ae168ed04f50160d9ad74573546c2fd6283604f105c84b54e47f2fc85030a64 nss-3.14.3-4.el6_4.i686.rpm a2dcfab2e26fc6ea3315e8edc350e4d187ee696953df9e8c2897de3520a4335e nss-devel-3.14.3-4.el6_4.i686.rpm 433800763e54157c6a9d53df5522bff0624927697418ad84505d3d1dac67c158 nss-pkcs11-devel-3.14.3-4.el6_4.i686.rpm 18802405fe1c3aab26686261dae07eff2b87ca29e352d5dc167eae85d038e305 nss-softokn-3.14.3-3.el6_4.i686.rpm 2a667eebdb02342f05998f0f90f8241625ae2860b6152f3f4f6a50813ba2af98 nss-softokn-devel-3.14.3-3.el6_4.i686.rpm b3de628d33e606d08fc20371f8f31d2cde47894c0ff710d48dfadadfac436b19 nss-softokn-freebl-3.14.3-3.el6_4.i686.rpm 605febe4e77275e1e2f82c572c96edff7eb3bdddba6babb40ba611b7c6a982a2 nss-softokn-freebl-devel-3.14.3-3.el6_4.i686.rpm c8aa5e227980f3de0ef1e9f84376d489c4d0c0a78b9f19ddf78dd17a41ac3864 nss-sysinit-3.14.3-4.el6_4.i686.rpm 6b8a1e7f4b154929665b6906bf0ec5cab0986b6baa9745615ae08dc0cb331c88 nss-tools-3.14.3-4.el6_4.i686.rpm dba88322b701b9cdd9d40943cd7f8ed5b00d4e9a789c46ba3e8ed0000184af44 nss-util-3.14.3-3.el6_4.i686.rpm af95b7bcb6e5927034d3b8a304fbda7442c4311538651dcc3c6a7c62d5636762 nss-util-devel-3.14.3-3.el6_4.i686.rpm x86_64: 0f58d15d6a0701a653cdb2edb28c4637177a28205d4125a75b058401eb701638 nspr-4.9.5-2.el6_4.i686.rpm 57d33fdbd3ab84c918960216edcab613bf584d603f0a494d6e3e5ec91a330416 nspr-4.9.5-2.el6_4.x86_64.rpm 4bfc730889575fbfd3d9e381b7795a932ef4e5934980373cb25e07a37345da86 nspr-devel-4.9.5-2.el6_4.i686.rpm 59f0d2d2396a6eb7cb4e9220a20e8dfa5266ea7db576df822f811db7236144f1 nspr-devel-4.9.5-2.el6_4.x86_64.rpm 7ae168ed04f50160d9ad74573546c2fd6283604f105c84b54e47f2fc85030a64 nss-3.14.3-4.el6_4.i686.rpm 2ff15881fafd6fa527870e68505c3ba8c9b2bf1a85aa7a552105acd42190594c nss-3.14.3-4.el6_4.x86_64.rpm a2dcfab2e26fc6ea3315e8edc350e4d187ee696953df9e8c2897de3520a4335e nss-devel-3.14.3-4.el6_4.i686.rpm ca3c264dca47cc751bab6d8e5be9f9082624fdccccc2bbc4ead802e8a197b57c nss-devel-3.14.3-4.el6_4.x86_64.rpm 433800763e54157c6a9d53df5522bff0624927697418ad84505d3d1dac67c158 nss-pkcs11-devel-3.14.3-4.el6_4.i686.rpm a1570ffea92be30305656b4c55e5303fe882975f2de5897c4241de2b3c76b183 nss-pkcs11-devel-3.14.3-4.el6_4.x86_64.rpm 18802405fe1c3aab26686261dae07eff2b87ca29e352d5dc167eae85d038e305 nss-softokn-3.14.3-3.el6_4.i686.rpm f9e2fd78ce1753318dc58cc4a25256f9df080acedb72e71ba18acfaa6273c807 nss-softokn-3.14.3-3.el6_4.x86_64.rpm 2a667eebdb02342f05998f0f90f8241625ae2860b6152f3f4f6a50813ba2af98 nss-softokn-devel-3.14.3-3.el6_4.i686.rpm 117d1a28427043e135d37d67cf0194a1bb11cc5cf7cafd85052daff62707958c nss-softokn-devel-3.14.3-3.el6_4.x86_64.rpm b3de628d33e606d08fc20371f8f31d2cde47894c0ff710d48dfadadfac436b19 nss-softokn-freebl-3.14.3-3.el6_4.i686.rpm 6d2da6ca90216ee54b0b3b21d81b2625d7f445cfbe5dc96f6aa9c7b596a1cbdf nss-softokn-freebl-3.14.3-3.el6_4.x86_64.rpm 605febe4e77275e1e2f82c572c96edff7eb3bdddba6babb40ba611b7c6a982a2 nss-softokn-freebl-devel-3.14.3-3.el6_4.i686.rpm 1af74a48132ed48e31251c266ba874bb668ce960bdcae358766b41d4f8b128e7 nss-softokn-freebl-devel-3.14.3-3.el6_4.x86_64.rpm 41229dc949f87617afe24002aa67b55f983a0048b8857f8cc8aef5932b9e2e19 nss-sysinit-3.14.3-4.el6_4.x86_64.rpm fa478a0b151e56838d0dc36a7c1bdb53888ebb54d931b314d329a679b4703ff8 nss-tools-3.14.3-4.el6_4.x86_64.rpm dba88322b701b9cdd9d40943cd7f8ed5b00d4e9a789c46ba3e8ed0000184af44 nss-util-3.14.3-3.el6_4.i686.rpm dec26cdc286feb5d39b3fd0ae745a7900df3888b43901b3b86e2d99869005876 nss-util-3.14.3-3.el6_4.x86_64.rpm af95b7bcb6e5927034d3b8a304fbda7442c4311538651dcc3c6a7c62d5636762 nss-util-devel-3.14.3-3.el6_4.i686.rpm 84a63ecf7366f2275029a26422280179dd18fd0d1215324c472acf8eba42a970 nss-util-devel-3.14.3-3.el6_4.x86_64.rpm Source: dbeec138d5284b66d667ec45c8e07548801aa3a5db5955bbaa4313bc6c949def nspr-4.9.5-2.el6_4.src.rpm 467f81da27edec40bd8e64809e53f156b396aa54bb397f5c18adb5d2eab3aeee nss-3.14.3-4.el6_4.src.rpm 08b72f9ad32172a9017328f5bb652280aafb7f35bdcf0b704a0d3a6fddd1d0ee nss-softokn-3.14.3-3.el6_4.src.rpm 7bf46cfaeacf80ac9e3d2197d2f3589b84f2125fe008f34a63751da36829dc23 nss-util-3.14.3-3.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 8 Aug 2013 08:45:54 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1146 CentOS 6 nss-pam-ldapd Update To: centos-announce(a)centos.org Message-ID: <20130808084554.GA46881(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1146 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1146.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2b9b463c19a42424b4a9e45b414b68897bfb82d46381621fe382f4a446c29409 nss-pam-ldapd-0.7.5-18.2.el6_4.i686.rpm x86_64: 2b9b463c19a42424b4a9e45b414b68897bfb82d46381621fe382f4a446c29409 nss-pam-ldapd-0.7.5-18.2.el6_4.i686.rpm 167b24d4bd19e09ca0639b21185a12547b415a00ee4bde96cb6ee66fb8d40f6f nss-pam-ldapd-0.7.5-18.2.el6_4.x86_64.rpm Source: db2472a9bf272cba36b901960f2290592222718c63eb8ba136e65a555d409e11 nss-pam-ldapd-0.7.5-18.2.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 6 ***********************************************

1 0

problem configuring grub for a dual-boot
by Vanhorn, Mike 08 Aug '13

08 Aug '13

I have Windows 7 on /dev/sda and CentOS 6.4 on /dev/sdb. Here are the layouts: (parted) select /dev/sda Using /dev/sda (parted) print Model: ATA WDC WD10EZEX-00Z (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 374MB 373MB primary ntfs boot 2 374MB 1000GB 1000GB primary ntfs (parted) select /dev/sdb Using /dev/sdb (parted) print Model: ATA ST500DM002-1BD14 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 211MB 210MB fat16 boot 2 211MB 735MB 524MB ext4 3 735MB 500GB 499GB lvm /boot/efi/EFI/redhat/grub.conf looks like this: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,1) # kernel /vmlinuz-version ro root=/dev/mapper/vg_amrl01-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sdb1 device (hd0) HD(1,800,64000,9b55c4a9-fdbe-4fcd-857b-8e7e129e29f9) default=0 timeout=5 splashimage=(hd0,1)/grub/splash.xpm.gz hiddenmenu title CentOS 6 (2.6.32-358.14.1.el6.x86_64) root (hd0,1) kernel /vmlinuz-2.6.32-358.14.1.el6.x86_64 ro root=/dev/mapper/vg_amrl01-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_amrl01/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_amrl01/lv_root rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-358.14.1.el6.x86_64.img title Windows 7 rootnoverify (hd1,0) chainloader +1 The system boots into CentOS just fine, but selecting the "Windows 7" entry results in invalid EFI file path Error 1: Filename must be either an absolute pathname or blocklist Press any key to continue... By my understanding, since grub is installed on sdb, then sdb becomes hd0 and thus sda would become hd1, and so telling it to boot Windows from hd1,0 makes sense. Also, since anaconda created the Windows entry during the CentOS install, I would have expected this to work. However, as it doesn't work, I'm clearly missing something. Can someome please point me in the right direction as to why this isn't working? Thanks! --- Mike VanHorn Senior Computer Systems Administrator College of Engineering and Computer Science Wright State University 265 Russ Engineering Center 937-775-5157 michael.vanhorn(a)wright.edu http://www.cecs.wright.edu/~mvanhorn/

3 3

file system resizing with cloud-init on centos/redhat??
by Gelen James 07 Aug '13

07 Aug '13

Hi, Has any one used resizefs module with cloud-init on centos/redhat before? How to call it with #cloud-config user data, do I need to give it any parameters? I googled cloud-init, but it is pretty difficult to find a manual/book on this, and mostly they are Ubuntu based. If possible, I'd like to use a same image/AMI to boot up instances(VMs) with different disk size setup, and let cloud-init to take care of increasing partition size, and file system resizing. Is it possible for centos/redhat? Any insights / suggestions are welcomed. Thanks. Gelen

2 1

repoforge :: is it still active?
by Adrian Sevcenco 07 Aug '13

07 Aug '13

Hi! I am trying to to ask the packagers from repoforge for updated packages of ganglia and rrdtool and i got no answer on their mail list.. Does anyone have idea if repoforge is still active? Thanks! Adrian

2 2

Problem with touchpad
by Ahmed 07 Aug '13

07 Aug '13

Hi there, i recently installed centos 6 64bit version on my HPProBook4530s Laptop. After running full system update and system restarted, my touch pad is not responding any more. How can i fix this problem? Kind Regards

3 5

← Newer
1
...
9
10
11
12
13
14
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss August 2013