December 2014 - Discuss - lists.centos.org

CentOS 5- mount shows a cifs share mounted 4 times!
by Niamh Holding 11 Dec '14

11 Dec '14

Hello, How can this happen? mount -l /dev/sda3/ on type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sda1 on /boot type ext4 (rw) /dev/sdb1 on /music type ext3 (rw) /dev/mapper/VolGroup00-LogVol00 on /fedora type ext3 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) 10.0.0.3:/backup on /backup type nfs (rw,addr=10.0.0.3) /etc/named on /var/named/chroot/etc/named type none (rw,bind) /etc/named.rfc1912.zones on /var/named/chroot/etc/named.rfc1912.zones type none (rw,bind) /etc/rndc.key on /var/named/chroot/etc/rndc.key type none (rw,bind) /usr/lib64/bind on /var/named/chroot/usr/lib64/bind type none (rw,bind) /etc/named.iscdlv.key on /var/named/chroot/etc/named.iscdlv.key type none (rw,bind) /etc/named.root.key on /var/named/chroot/etc/named.root.key type none (rw,bind) 10.0.0.253:/i-data/48e5a222/nfs/music on /thecus-music type nfs (rw,addr=10.0.0.253) 10.0.0.253:/i-data/48e5a222/nfs/fedora on /thecus-backup type nfs (rw,addr=10.0.0.253) \\\\10.0.0.253\\niamh on /NSA320-music type cifs (rw) \\\\10.0.0.253\\niamh on /NSA320-music type cifs (rw) \\\\10.0.0.253\\niamh on /NSA320-music type cifs (rw) \\\\10.0.0.253\\niamh on /NSA320-music type cifs (rw) \\\\10.0.0.253\\fedora on /NSA320-fedora type cifs (rw) -- Best regards, Niamh mailto:niamh@fullbore.co.uk

2 4

CentOS 7 grub.cfg missing on new install
by Jeff Boyce 11 Dec '14

11 Dec '14

Greetings - The short story is that got my new install completed with the partitioning I wanted and using software raid, but after a reboot I ended up with a grub prompt, and do not appear to have a grub.cfg file. So here is a little history of how I got here, because I know in order for anyone to help me they would subsequently ask for this information. So this post is a little long, but consider it complete. Brand new Dell system with two 3GB drives in this system with RAID1 LVM taking all the space outside the boot partitions. I initially created the sda[1,2] and sdb[1,2] partitions via GParted leaving the remaining space unpartitioned. A gpt partition table was put on both drives. During installation Anaconda recognized everything properly which resulted in the following partition summary: sda1 /boot/efi 500 MB EFI System Partition sda2 /boot 500 MB xfs vg_jab-hostroot / 8 GB LVM xfs RAID1 vg_jab-hostvar /var 4 GB LVM xfs RAID1 vg_jab-hostswap /swap 2 GB LVM swap RAID1 The installer also recognized and listed these unknown partitions that were untouched during installation. sdb1 vfat 500 MB standard partition sdb2 vfat 500 MB standard partition Installation proceeded successfully, and after the initial reboot of the system I used mdadm commands to watch the raid complete building before doing anything else (I know, not necessary but I am doing other things and had the time to let it complete). I rebooted the system and got a terminal prompt as expected (no GUI installed). At this point I needed to copy my /boot/efi and /boot partitions from sda[1,2] to sdb[1,2] so that the system would boot from either drive, so I issued the following sgdisk commands: root# sgdisk -R /dev/sdb1 /dev/sda1 root# sgdisk -R /dev/sdb2 /dev/sda2 root# sgdisk -G /dev/sdb1 root# sgdisk -G /dev/sdb2 Results of the first command above: Found invalid GPT and valid MBR; converting MBR to GPT format. Warning the kernel is still using the old partition table. The new table will be used at the next reboot. The operation has completed successfully. The same note (from the Warning on) was repeated for the other three commands. I then installed GRUB2 on /dev/sdb1 using the following command: root# grub2-install /dev/sdb1 Results: Installing for x86_64-efi platform. Installation finished. No error reported. I rebooted the system now, only to be confronted with a GRUB prompt. Thinking that this is a good opportunity to for me to learn to rescue a system since I am going to need to understand how to recover from a disk or raid failure, I started researching and reading. It takes a little bit of work to understand what information is valuable when a lot of it refers to GRUB (not GRUB2) and doesn't make reference to UEFI booting and partitions. I found this Ubuntu wiki as a pretty good source https://help.ubuntu.com/community/Grub2/Troubleshooting#Search_.26_Set Below is the current information of my system as seen by grub; grub# set (the important grub2 variables are:) prefix = (hd1, gpt2)/grub2 root = hd1, gpt2 grub# ls -lha Device proc: filesystem type procfs Device hd0: no known filesystem detected Device hd1: no known filesystem detected Partition hd1, gpt3: no known filesystem detected Partition hd1, gpt2: filesystem xfs Partition hd1, gpt1: filesystem fat Device hd2: no known filesystem detected Partition hd2, gpt3: no known filesystem detected Partition hd2, gpt2: no known filesystem detected Partition hd2, gpt1: no known filesystem detected grub# ls (hd1, gpt2) -l / /efi /grub /grub2 vmlinuz -3.10.0-123.el7.x86_64 initramfs-3.10.0-123.el7.x86_64.img ... plus some other files Looking through the directories, I see that there is no grub.cfg file. Other than grub not recognizing the filesystem on hd2, the directories on hd2, gpt[1,2] seem to be identical to hd1, gpt[1,2] as I would assume based on the sgdisk commands I gave to copy them. My initial thinking is that I need to re-run grub2-install on hd1 (sda), but I need a running system to do that. So following the guidance I had I issued the following commands in grub to boot the system. grub# linux /vmlinuz -3.10.0-123.el7.x86_64 root=/dev/sda2 ro grub# initrd /initramfs-3.10.0-123.el7.x86_64.img grub# boot Unfortunately the system hung on booting, with the following information in the "journalctl" file: # journalctl Not switching root: /sysroot does not seem to be an OS tree. /etc/os-release is missing. Initrd-switch-root.service: main process exited, code=exited, status=1/FAILURE Failed to start Switch Root. . . . . . Triggering OnFailure= dependencies of initrd-switch-root.service. Starting Emergency Shell. . . Failed to issue method call: Invalid argument Now I am not sure that I want to get misdirected to what the problem is with this boot, if I can boot from a CD in linux rescue mode and do the grub install, then be back to a booting system. So lets ignore the boot error if we can. So I boot from a CD in rescue mode, and it is only able to automatically mount sd3 under /mnt/sysimage (the LVM RAID1 containing mounts for / and /var). I am able to manually mount sda1 and sda2, but am not sure at what level in the filesystem to mount them (i.e., at /mnt/sda1 or at mnt/sysimage/sda1) in order to properly run grub2-install. So that is where I am at now. I would like to know how to repair the system, rather than starting over on a new install. Can someone enlighten me on what I need to do from here. Also if someone can speculate on why my grub.cfg is missing in the first place I would be interested. Also, please cc me directly on any responses, as I am only subscribed to the daily digest. Thanks. Jeff Boyce Meridian Environmental www.meridianenv.com

3 4

CentOS-announce Digest, Vol 118, Issue 7
by centos-announce-request＠centos.org 11 Dec '14

11 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:1971 Important CentOS 7 kernel Security Update (Johnny Hughes) 2. CESA-2014:1976 Important CentOS 7 rpm Security Update (Johnny Hughes) 3. CEEA-2014:1980 CentOS 7 systemd Enhancement Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Dec 2014 12:48:13 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1971 Important CentOS 7 kernel Security Update Message-ID: <20141210124813.GA47995(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1971 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1971.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0ba4633c95c00c8c0e680e4ba25a7d86b814997e770ec969b13786e7dc293edb kernel-3.10.0-123.13.1.el7.x86_64.rpm 9394409a1a2198f722c5413405cab3a02ff9f3e84a4b7ebbc79bfd4d33a9c1bf kernel-abi-whitelists-3.10.0-123.13.1.el7.noarch.rpm c1fccd2c7a95dae3ccd3b4d3970c96fcda48c7fe21c8a7e8580dd19171c51278 kernel-debug-3.10.0-123.13.1.el7.x86_64.rpm b694c8adb48d481617db3056c34dd455962bf48994ebd5ac7339d5169842766d kernel-debug-devel-3.10.0-123.13.1.el7.x86_64.rpm fa1622aaa604897b79cd7e468b9d99c81c4e9b2c94c24ebacb6f94070907f579 kernel-devel-3.10.0-123.13.1.el7.x86_64.rpm 5db912400deea9b97dcbfb113d5dc67e47c6f04f763cdc28615f9eb7cf74c59d kernel-doc-3.10.0-123.13.1.el7.noarch.rpm 198ad46ad016f25e59c0d96daf207feaaf214c90e41c33e03324141f4d485c7e kernel-headers-3.10.0-123.13.1.el7.x86_64.rpm ddb99325960b064fb283c5a2dbc505b8a452663d00bbd6e6247150c53a834e18 kernel-tools-3.10.0-123.13.1.el7.x86_64.rpm bc0c7bde959031b02fe76e4ff4016d61bb0db6bc6cb15fe5bf7b858814539eaa kernel-tools-libs-3.10.0-123.13.1.el7.x86_64.rpm ac5b1b0066d71d38f2a5e2a231b6b81603dfd4f16c314d8eb94738550f4b2af1 kernel-tools-libs-devel-3.10.0-123.13.1.el7.x86_64.rpm 1221821e953c8c6122b87ca9878ef3fe69dac93243061e13fb6f8756a313fc0d perf-3.10.0-123.13.1.el7.x86_64.rpm 2ad0cf510727c006412e2ca1c944e0e47fb6cfb6c24a2bb86d3e6cbf61cc51b4 python-perf-3.10.0-123.13.1.el7.x86_64.rpm Source: 264dd245a168050e3c8cf54adf892827786fd07a03f55cc45e6b9fdb46486354 kernel-3.10.0-123.13.1.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 10 Dec 2014 12:49:42 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1976 Important CentOS 7 rpm Security Update Message-ID: <20141210124942.GA48114(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1976 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1976.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 42d0d9d8c43646be6bb73af2645e7e7d00613ffbd7281a167e938e13254d838d rpm-4.11.1-18.el7_0.x86_64.rpm 3718d08372462fb7670e87dd49c55ccd3ba241c9c99b849478fcba4783f78102 rpm-apidocs-4.11.1-18.el7_0.noarch.rpm 4cb5f67b92322653529f9c2c4f21756e4500c4c009c8d7e76a9ef29fa92e8d52 rpm-build-4.11.1-18.el7_0.x86_64.rpm 6d0cd4d0e424f21e6f51b89a9eb81b42c6d36824e16d8ff839f442c5504e081b rpm-build-libs-4.11.1-18.el7_0.i686.rpm 5414fe17e10dc2032fb7dd007f983acdee938c21c9352351e9c8a1529e990275 rpm-build-libs-4.11.1-18.el7_0.x86_64.rpm e9e3de0f85d9f06931ea379c9c0b9da041468986f4c6e96029c8ae918ab44db5 rpm-cron-4.11.1-18.el7_0.noarch.rpm e8f8a8be3445672da00e8c2a687b902981c6ea453bc3e87b6d0e83b9a93b6b94 rpm-devel-4.11.1-18.el7_0.i686.rpm 5e9ad78b8bbb20470671e3575657468c7db209156600b5502d06e3055e9a9808 rpm-devel-4.11.1-18.el7_0.x86_64.rpm b1cad417e97633e8989ffbc62512f9b51323d3adfe3f87455dd40df0cfc43ffd rpm-libs-4.11.1-18.el7_0.i686.rpm 44fe1c44040cd329c58ae73a02c778715f8bf1528bfc7fd6a18eac2c0bc0dfd2 rpm-libs-4.11.1-18.el7_0.x86_64.rpm 16fd2ef83d8b529c171275273dfb52a68605557ad8aad56e6f56ca2481bfd0d6 rpm-python-4.11.1-18.el7_0.x86_64.rpm 03ddda6f66ed8a65c43f2fddc6f3d9475d5891dd264cb6bff83a3707e953b36a rpm-sign-4.11.1-18.el7_0.x86_64.rpm Source: 7d5bbcb466c84459731a4830945d454ffbcf14b773fd318594d29e73fdde5052 rpm-4.11.1-18.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 10 Dec 2014 18:01:42 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2014:1980 CentOS 7 systemd Enhancement Update Message-ID: <20141210180142.GA63031(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2014:1980 Upstream details at : https://rhn.redhat.com/errata/RHEA-2014-1980.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 76462e4363ce5797ab56121f8aa97d0d9f287a9aef553169acdac60335c4e18e libgudev1-208-11.el7_0.5.i686.rpm 58fbf71029f394dd4c479a485dbb6ae58dd53fb136c2f9f3f56a4b4ad7a5a037 libgudev1-208-11.el7_0.5.x86_64.rpm 72647abaf90ccfa43876fd0658274cb192321309ddffcfabf62e776c2eaf1b81 libgudev1-devel-208-11.el7_0.5.i686.rpm bb619bc91212161f1023c7d3a19f3621da0deb90ea9c423133e6808ac8081796 libgudev1-devel-208-11.el7_0.5.x86_64.rpm f92c934c7e33eecfa6d61e381c802b545bae7e4a7aea8c22c9620db36b60ce8c systemd-208-11.el7_0.5.x86_64.rpm 71c683a6e25be078a289a869ef19c99e4b551e227b7b235086e698a2c4634f65 systemd-devel-208-11.el7_0.5.i686.rpm ad81732daae202d6c2a8402b1cdafba71cabd3c32e07b929311be51f297d3670 systemd-devel-208-11.el7_0.5.x86_64.rpm 5340d9172ef47c5aa50da21e14a99a6e137c5e2bb46df50a820730838aea42a7 systemd-journal-gateway-208-11.el7_0.5.x86_64.rpm 21af9be039d62b5a5ff704091fe781af1c0a3cb385fc76114f3d82d37cc30027 systemd-libs-208-11.el7_0.5.i686.rpm 51b8848464514511f760b53df315ce47b16acc22dddd90893fbe16c603337dca systemd-libs-208-11.el7_0.5.x86_64.rpm c846665baf2c8db0ee7430e0cfef1a9b9bbe31bfe346e13ec6d2cfb0f11ae742 systemd-python-208-11.el7_0.5.x86_64.rpm 5c3772a7328bb90083d232a38daaa664ccba48dca13ceb0d8af6e8e3fa110401 systemd-sysv-208-11.el7_0.5.x86_64.rpm Source: 95d1c9bd799953ed083add14f9fec9acd3e2be2136457d8707278ff23afba2f2 systemd-208-11.el7_0.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 7 ***********************************************

1 0

get /full/path/filename.ext from filename.ext
by ken 11 Dec '14

11 Dec '14

This should be simple, but it's not, unless I'm forgetting something. Writing a script, an arg is a filename. So fname=$1 But I want that expanded to include the full path and filename, not just what is given as the arg on the command line. E.g., if the user's cwd is /home/joe/a/b/c/ and he specifies ../x/file-a.ext then the function/utility should transform that into the absolute path with filename: /home/joe/a/b/x/file-a.ext In the simplest scenario, the answer would be $PWD/file-a.ext, but that would by no means cover a portion of the possible scenarios. You'd think this functionality would be included already in one or another linux utility. It's kinda like the complement to the 'basename' utility. I've looked into the dark corners of ls, stat, file, bash, type, find, and a few other linux standards, but nothing seems to do this. Any gurus out there know the utility which does this?

4 5

print something on console after boot
by Florin Andrei 10 Dec '14

10 Dec '14

CentOS 7 How do I print something on the text-mode console right after the OS has finished booting? I've a virtual instance and I need to know its IP address after it has finished booting up, to know where to ssh into it. I've tried adding "ip -4 addr > /dev/tty0" to rc.local, but that obviously doesn't work, because the login prompt overwrites everything I do. -- Florin Andrei http://florin.myip.org/

5 4

No package group "X Window System" in CentOS 7.0?
by Niki Kovacs 10 Dec '14

10 Dec '14

Hi, I'm currently experimenting with CentOS 7.0 in a few virtual guests, trying to install a reduced GNOME desktop as well as a minimal KDE desktop. I'm following this documentation: http://www.dokuwiki.tachtler.net/doku.php?id=tachtler:centos_7_-_minimal_de… I'm stuck at this point: # yum groupinstall "X Window System" Now I remember this from CentOS 5.x, when I began desktop installations with a minimal base system, then I added X11, configured it (using the minimal TWM), then added GNOME, then applications as needed. Now there seems to be no more "X Window System" group. At least 'yum grouplist' knows nothing about it. Any suggestions? Cheers, Niki -- Microlinux - Solutions informatiques 100% Linux et logiciels libres 7, place de l'église - 30730 Montpezat Web : http://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32

1 0

Re: [CentOS] CentOS-6.6 - Selinux and Postfix-2.11.1
by James B. Byrne 10 Dec '14

10 Dec '14

On Tue, December 9, 2014 18:45, Alexander Dalloz wrote: > Am 09.12.2014 um 23:04 schrieb James B. Byrne: >> Applied policy update. Now I see these occasionally. But by the time I try >> and >> see what the matter is the file is gone: > > Why do you start a new thread instead of continuing the old one about > the very same topic? > If you have a way to thread digest messages then I am open to suggestions. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

NSS update issues.
by Lamar Owen 10 Dec '14

10 Dec '14

Ran into a bit of a sticky wicket today. And for reasons that should be obvious it was a bit difficult to google for a solution, so I backed out the upgrade. So I'm hoping someone here has seen and fixed this already. System: CentOS 7, fully updated. After the nss updates in the past day or so, visiting https://www.google.com with Firefox results in the following error screen: Secure Connection Failed An error occurred during a connection to www.google.com. The server rejected the handshake because the client downgraded to a lower TLS version than the server supports. (Error code: ssl_error_inappropriate_fallback_alert) The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. Ok, so how do I fix this (other than 'yum downgrade nss firefox nss-sysinit nss-devel nss-tools' which does 'fix' the issue)?

4 4

CentOS 7 install software Raid on large drives error
by Jeff Boyce 10 Dec '14

10 Dec '14

Greetings - I am trying to install CentOS 7 into a new Dell Precision 3610. I have two 3 TB drives that I want to setup in software RAID1. I followed the guide here for my install as it looked fairly detailed and complete (http://www.ictdude.com/howto/install-centos-7-software-raid-lvm/). I only changed the size of the partitions from what is described, but ended up with the disk configuration error that won't allow the installation to complete. The error is: You have not created a bootloader stage 1 target device. You have not created a bootable partition. So I am clearly missing a step in setting up the drives; likely before running the installer. My disks are blank raw disks right now with nothing on them. Reading the RHEL Storage Admin Guide (Sec. 18.6, Raid Support in the Installer) this should be supported, but I am assuming I may need to do something different because the drives are greater than 2 TB. I have a SystemRescueCD that I can use GParted to do some setup in advance of the installer, but am not sure of what exactly I need to do. My objective is to RAID1 the two drives, use LVM on top of the RAID, install CentOS7 as a KVM host system, with two KVM guests (Linux Mint and Windows 7). Can anyone tell me the steps I am missing, or point me to a better tutorial than what I have found in my extensive Google searches. Thanks. Please cc me directly on replies as I am only subscribed to the daily digest. Thanks. Jeff Boyce www.meridianenv.com

3 2

CentOS-announce Digest, Vol 118, Issue 6
by centos-announce-request＠centos.org 10 Dec '14

10 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1970 CentOS 6 dovecot BugFix Update (Johnny Hughes) 2. CEBA-2014:1969 CentOS 7 qemu-kvm BugFix Update (Johnny Hughes) 3. CESA-2014:1974 Important CentOS 6 rpm Security Update (Johnny Hughes) 4. CESA-2014:1974 Important CentOS 5 rpm Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 9 Dec 2014 14:57:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1970 CentOS 6 dovecot BugFix Update Message-ID: <20141209145703.GA51363(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1970 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1970.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 60b713a7c88f9fbebd814a37c9dd08433069021f669650e24f6da134932d2b13 dovecot-2.0.9-8.el6_6.1.i686.rpm 8df37000802b038252439fc3906e38034a049b026b0f5700fadfc84fc0723004 dovecot-devel-2.0.9-8.el6_6.1.i686.rpm 5b36a701688f0274fc89a31b13a34e5a9758875dc28ce01515c9074cc807cf41 dovecot-mysql-2.0.9-8.el6_6.1.i686.rpm b719f54e59db6014fff1e7a2f78c0767a102d74c53305f67cf7b62e2a1251f5a dovecot-pgsql-2.0.9-8.el6_6.1.i686.rpm 62b969e2a9269e619921c151f2292a97cbd2b784bd4314fb13ceaa4d9e999309 dovecot-pigeonhole-2.0.9-8.el6_6.1.i686.rpm x86_64: 60b713a7c88f9fbebd814a37c9dd08433069021f669650e24f6da134932d2b13 dovecot-2.0.9-8.el6_6.1.i686.rpm fedc17d8cd7f55e74e9a701a0b5696e65ba53fc384d0e680c81fddc5a9d8486e dovecot-2.0.9-8.el6_6.1.x86_64.rpm c96fb733663acaa57c2bee2f67651e1209ac7b85106d31c5358b2d70b888750e dovecot-devel-2.0.9-8.el6_6.1.x86_64.rpm 7aee52329db15389bd3e0304df0165ff4048ff93b31c60158382a695040b7cdd dovecot-mysql-2.0.9-8.el6_6.1.x86_64.rpm 7add0f3fb4d4bb7262dc52d50aafb237d3601e4bb30315644bd11c5699803793 dovecot-pgsql-2.0.9-8.el6_6.1.x86_64.rpm ed820ee36ee7cb7c99b90215c2378a111ac6ca81e1ee54c132b46368c9e9bfec dovecot-pigeonhole-2.0.9-8.el6_6.1.x86_64.rpm Source: 91202afaf263076b3f3afb2a8f2591d65506b4066425f4160f1c99ca086c497d dovecot-2.0.9-8.el6_6.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 9 Dec 2014 15:22:28 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1969 CentOS 7 qemu-kvm BugFix Update Message-ID: <20141209152228.GA62614(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1969 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1969.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 7bb6a67af8966c6d7f8541742a80120588c3e3304ee1200c5834135551cd7f2f libcacard-1.5.3-60.el7_0.11.i686.rpm 27e0f6d8782ae092c0decd9f86a850e7e49b69897fbfb1693d184ca6c8daa7dd libcacard-1.5.3-60.el7_0.11.x86_64.rpm 2a14f9b94061686b5c5b8653ec25f31c500bcd1bd7f1a428e86ad3fa659bf884 libcacard-devel-1.5.3-60.el7_0.11.i686.rpm cb78e295a62161e6a63594b929951ee49c2f5fc88192aa303db45f3cf346dc5f libcacard-devel-1.5.3-60.el7_0.11.x86_64.rpm 43fe873b1e478e0a05c92a06a5887ffc79ae202bdfd9d143fcb9ae7bc39f1302 libcacard-tools-1.5.3-60.el7_0.11.x86_64.rpm d92ef7bb2f6a65fe4ad40e2e284b6b63f8b99d52fc8d6ac7d8007618482c8870 qemu-guest-agent-1.5.3-60.el7_0.11.x86_64.rpm 5a40981a8021e16782763cde8097554327d3eddf08ea7e0f9b2f1ccec9ccc9e2 qemu-img-1.5.3-60.el7_0.11.x86_64.rpm 326e5088e8d34d45d52d2738dbe9c4611efb30d9da092dbf1dbdd2e9dd16e80f qemu-kvm-1.5.3-60.el7_0.11.x86_64.rpm 369861ce4cff38942f9a1b50cc49a0feb208077b41894e1e00b2c9e4e9e102c5 qemu-kvm-common-1.5.3-60.el7_0.11.x86_64.rpm b0f3cc3ec207bf8b6556e1b11e438c27a64f3476679361d5f3e3218bd79a21cd qemu-kvm-tools-1.5.3-60.el7_0.11.x86_64.rpm Source: 8ffc1503525ba5ce6b76d765baf15b49f15d0f7e5369184aaafa60c689e062b8 qemu-kvm-1.5.3-60.el7_0.11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 9 Dec 2014 20:01:37 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1974 Important CentOS 6 rpm Security Update Message-ID: <20141209200137.GA6127(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1974 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1974.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 52fa7b2f13b6a62977fd5224c283cb0b034e2b16f71d3554427572cb41e6b8ec rpm-4.8.0-38.el6_6.i686.rpm 1a90f70c8211ce3e19221df2587161a4a0c59c657cba520bdb88db6cface5cee rpm-apidocs-4.8.0-38.el6_6.noarch.rpm 504cebc256639051a9ef8a30883aa52c5865a7316d75148a6b2be0c1a4a54767 rpm-build-4.8.0-38.el6_6.i686.rpm 17edf0003b4d8438aacacb70cefca3872bb4175ba1253baad791db2bd0b978e8 rpm-cron-4.8.0-38.el6_6.noarch.rpm 82297ab09d50bab338efedadb3bd37867afa20eaa1066433ce04c75226e61610 rpm-devel-4.8.0-38.el6_6.i686.rpm 78e470176542ae0800ebbd95deee0bb03249eb6acb3a71c8bfbf95cbb9b9b023 rpm-libs-4.8.0-38.el6_6.i686.rpm 3c215b17af81d2b89bd8100a48bf02416cf9dd89827dc486740748b802c4ca98 rpm-python-4.8.0-38.el6_6.i686.rpm x86_64: d05aa70a5c7c2f61f12c0b0459422bac941d967176bc80d5593820f56b6aa962 rpm-4.8.0-38.el6_6.x86_64.rpm 1a90f70c8211ce3e19221df2587161a4a0c59c657cba520bdb88db6cface5cee rpm-apidocs-4.8.0-38.el6_6.noarch.rpm bc5fb9ac7bdf354a69776def22370ee3cd20e2d66dda5f0f5c4a0ac6328abc1e rpm-build-4.8.0-38.el6_6.x86_64.rpm 17edf0003b4d8438aacacb70cefca3872bb4175ba1253baad791db2bd0b978e8 rpm-cron-4.8.0-38.el6_6.noarch.rpm 82297ab09d50bab338efedadb3bd37867afa20eaa1066433ce04c75226e61610 rpm-devel-4.8.0-38.el6_6.i686.rpm a78d256d435df57e9e36cfa03f8b1c03b1d68581cd8935f7923dec0d2f71562a rpm-devel-4.8.0-38.el6_6.x86_64.rpm 78e470176542ae0800ebbd95deee0bb03249eb6acb3a71c8bfbf95cbb9b9b023 rpm-libs-4.8.0-38.el6_6.i686.rpm e5994327fe5828dec70621eb906357a800a303afb599e68ac0ecd0a3046dfb0a rpm-libs-4.8.0-38.el6_6.x86_64.rpm 419c4c4e7969b163717e67aa725d0ff94a1a998510e4181241597b6b21732035 rpm-python-4.8.0-38.el6_6.x86_64.rpm Source: 62b50a40fdd732520474ab18bf9a9c1a04c56edf88d0f7956f662e8678353cc9 rpm-4.8.0-38.el6_6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 9 Dec 2014 20:16:13 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1974 Important CentOS 5 rpm Security Update Message-ID: <20141209201613.GA9284(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1974 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1974.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ce90ffc946e163665a6e234ba7862b5df26fb2f4400302a21474ec8f81d1c51d popt-1.10.2.3-36.el5_11.i386.rpm 4e4ea91fe232ccbbcb086b34e69f0143808bf413395fd250053d8beaefe85808 rpm-4.4.2.3-36.el5_11.i386.rpm 5c497c44d5aac32100609370687ead0884104493984a9be3a5196d8412ea069a rpm-apidocs-4.4.2.3-36.el5_11.i386.rpm a2f6f9a12e5fab40ed4c3e70702a19c6fbee93af4a306d5506e381061124ceb0 rpm-build-4.4.2.3-36.el5_11.i386.rpm 08c335b4bab7f770935acf9c608bee48b99ce77f3ad47dbd404055251d05f7b5 rpm-devel-4.4.2.3-36.el5_11.i386.rpm 1d582cbae6a5e47538162f83a3618dbfdb1f62be744277469db5d1e8cf049c45 rpm-libs-4.4.2.3-36.el5_11.i386.rpm 36100d57ff3ffe7d2e0af6a6fb74a878ee93e3a1307afebfda991065637e5b34 rpm-python-4.4.2.3-36.el5_11.i386.rpm x86_64: ce90ffc946e163665a6e234ba7862b5df26fb2f4400302a21474ec8f81d1c51d popt-1.10.2.3-36.el5_11.i386.rpm 75d77f9593154d99c970c16839c9aab58fc6f685612a5fd98b899130b6ec08ff popt-1.10.2.3-36.el5_11.x86_64.rpm 749dc82cf33d9c09554836efc2dc2a2f696afcf75ec2fa52fa9e41ebbf66e3af rpm-4.4.2.3-36.el5_11.x86_64.rpm d02ab2431c2ede90c72f5bc0712afd9ae41506b23a4e6400646770d3951de71a rpm-apidocs-4.4.2.3-36.el5_11.x86_64.rpm 65e931a906bda36df7f3c4036d35815f90abdef1060c6abf487da6701ce47b62 rpm-build-4.4.2.3-36.el5_11.x86_64.rpm 08c335b4bab7f770935acf9c608bee48b99ce77f3ad47dbd404055251d05f7b5 rpm-devel-4.4.2.3-36.el5_11.i386.rpm ac1dfc7031d0b467166a42c2c0eafb0161c3b4ad77f33b559470e3ebffe122ca rpm-devel-4.4.2.3-36.el5_11.x86_64.rpm 1d582cbae6a5e47538162f83a3618dbfdb1f62be744277469db5d1e8cf049c45 rpm-libs-4.4.2.3-36.el5_11.i386.rpm 1945aafd9ac9a48e11333e897a12dfc027e7a2f580daecf07d7fec45af99baaa rpm-libs-4.4.2.3-36.el5_11.x86_64.rpm 2cd8de634c4af1a8eaff87f78e5c0d0846531ac3d2ae28fd995c4750663e34cf rpm-python-4.4.2.3-36.el5_11.x86_64.rpm Source: 588ac7a975477fd21d1d21a305b1d3b4947b8d0fbb98b16c083bdd355891e6ef rpm-4.4.2.3-36.el5_11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 6 ***********************************************

1 0

ipset not actually blocking
by Rob Townley 10 Dec '14

10 Dec '14

i created an ipset and added 8.8.8.8 to it and used the same iptables working all summer long but i can still ping 8.8.8.8 and do nslookup queries against it. ipset or iptables is broken. Anybody else rebooted since ipset-6.11-3.el6.i686 was installed and actually tested that IP addresses that are supposed to be blacklisted are actually blocked? Filed CentOS bug report 7977 <http://bugs.centos.org/view.php?id=7977> this morning. ipset was working great most of the year until ipset 6.11.-3 CentOS bug 7977 <http://bugs.centos.org/view.php?id=7977>

1 2

Moving back to CentOS + question about documentation
by Niki Kovacs 10 Dec '14

10 Dec '14

Hi, I'm a 47-year-old Austrian living in South France, and the manager of a small IT firm based on Linux and free software. A while back I have been a CentOS user, I was proficient with versions 4.x and 5.x, and I even published a book based on CentOS 5.x. After a stint on Debian, I based all my server and desktop solutions on Slackware (http://www.microlinux.fr/slackware/), which was my very first Linux distribution back in 2001, and for which I have kept a fondness. Over the last few months, I was frustrated with Slackware, mainly due to the absence of PAM and the near impossibility to configure centralized authentication using LDAP. Currently I'm using central authentication for a few setups in local schools, and the configurations are based on NIS, which is far from ideal. So I remembered CentOS, which I hadn't really touched since 5.x, downloaded a few ISOs of 6.6 and 7.0, setup a few VMs, and after a couple of weeks of experimentation, I guess I'm at the point where I'm hooked back to CentOS, even on the desktop. I have my own local repository for RPM packages that are not included in EPEL, or when I need to tweak them, and the last client that wanted me to setup a workstation will have a highly customized desktop based on CentOS 6.6 (I haven't yet figured out all the new quirks in 7.0, so I decided to stay on the safe side). I have some well written books about RHEL/CentOS 5.x, namely "RHEL 5 Unleashed" by Tammy Fox, "The Definitive Guide to CentOS" by Peter Membrey, Tim Verhoeven and Ralph Angenendt and "Foundations of CentOS Linux" by Ryan Baclit. Can you suggest any good books about RHEL/CentOS 6.x and/or 7.x? I like being able to sit in an armchair when I do some RTFM. :o) Cheers from South France, Niki -- Microlinux - Solutions informatiques 100% Linux et logiciels libres 7, place de l'église - 30730 Montpezat Web : http://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32

1 0

CentOS-6.6 - Selinux and Postfix-2.11.1
by James B. Byrne 10 Dec '14

10 Dec '14

Applied policy update. Now I see these occasionally. But by the time I try and see what the matter is the file is gone: /var/log/maillog . . . Dec 9 15:12:08 inet08 postfix/smtp[3670]: fatal: shared lock active/0A7EC60D8A: Resource temporarily unavailable . . . Dec 9 15:12:08 inet08 postfix/smtp[3758]: fatal: shared lock active/8DD5060F81: Resource temporarily unavailable . . . Dec 9 15:12:09 inet08 postfix/qmgr[3198]: warning: private/relay socket: malformed response Dec 9 15:12:09 inet08 postfix/qmgr[3198]: warning: transport relay failure -- see a previous warning/fatal/panic logfile record for the problem description Dec 9 15:12:09 inet08 postfix/master[3195]: warning: process /usr/libexec/postfix/smtp pid 3670 exit status 1 Dec 9 15:12:09 inet08 postfix/qmgr[3198]: warning: private/smtp socket: malformed response Dec 9 15:12:09 inet08 postfix/qmgr[3198]: warning: transport smtp failure -- see a previous warning/fatal/panic logfile record for the problem description Dec 9 15:12:09 inet08 postfix/master[3195]: warning: process /usr/libexec/postfix/smtp pid 3758 exit status 1 . . . /var/log/messages . . . Dec 9 15:12:15 inet08 setroubleshoot: SELinux is preventing /usr/libexec/postfix/smtp from lock access on the file /var/spool/postfix/active/8DD5060F81. For complete SELinux messages. run sealert -l 92969cc6-4d13-43ad-b39a-5ad0bbf2a4c7 . . . sealert -l 92969cc6-4d13-43ad-b39a-5ad0bbf2a4c7 SELinux is preventing /usr/libexec/postfix/smtp from lock access on the file /var/spool/postfix/active/9934A60C7D. ***** Plugin restorecon (99.5 confidence) suggests ************************* If you want to fix the label. /var/spool/postfix/active/9934A60C7D default label should be postfix_spool_t. Then you can run restorecon. Do # /sbin/restorecon -v /var/spool/postfix/active/9934A60C7D ***** Plugin catchall (1.49 confidence) suggests *************************** If you believe that smtp should be allowed lock access on the 9934A60C7D file by default. Then you should report this as a bug. You can generate a local policy module to allow this access. Do allow this access for now by executing: # grep smtp /var/log/audit/audit.log | audit2allow -M mypol # semodule -i mypol.pp -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Re: [CentOS] CentOS 7 install software Raid on large drives error
by Jeff Boyce 09 Dec '14

09 Dec '14

----- Original Message ----- From: "Mark Milhollan" <mlm(a)pixelgate.net> To: "Jeff Boyce" <jboyce(a)meridianenv.com> Sent: Thursday, December 04, 2014 7:18 AM Subject: Re: [CentOS] CentOS 7 install software Raid on large drives error > On Wed, 3 Dec 2014, Jeff Boyce wrote: > >>I am trying to install CentOS 7 into a new Dell Precision 3610. I have >>two 3 >>TB drives that I want to setup in software RAID1. I followed the guide >>here >>for my install as it looked fairly detailed and complete >>(http://www.ictdude.com/howto/install-centos-7-software-raid-lvm/). > > I suggest using the install guide rather than random crud. The storage > admin guide is fine to read too, but go back to the install guide when > installing. > > > /mark > Well I thought I had found a decent guide that wasn't random crud, but I can see now that it was incomplete. I have read the RHEL installation guide (several times now) and I am still not quite sure that it has all the knowledge I am looking for. I have played around with the automated and the manual disk partitioning system in the installation GUI numerous times now trying to understand what it is doing, or more accurately, how it responds to what I am doing. I have made a couple of observations. 1. The installer requires that I have separate partitions for both /boot and /boot/efi. And it appears that I have to have both of these, not just one of them. 2. The /boot partition can not reside on LVM. 3. The options within the installer then appear to allow me to create my LVM with Raid1, but the /boot and /boot/efi are then outside the Raid. 4. It looks like I can set the /boot partition to be Raid1, but then it is a separate Raid1 from the LVM Raid1 on the rest of the disk. Resulting in two separate Raid1s; a small Raid1 for /boot and a much larger Raid1 for the LVM volume group. I finally manually setup a base partition structure using GParted that allowed the install to complete using the format below. sda (3TB) sda1 /boot fat32 500MB sda2 /boot/efi fat32 500MB sdb (3TB) sdb1 /boot fat32 500MB sdb2 /boot/efi fat32 500MB The remaining space was left unpartitioned in GParted, which was then prepared as LVM Raid1 in the CentOS installer. The installer also put the /boot and /boot/efi files on sda1 and sda2. Then I would have to manually copy them over to sdb1 and sdb2 if I wanted to be able to boot from drive sdb if drive sda failed. I am not sure that this result is what I really want, as it doesn't Raid my entire drives. The structure below is what I believe I want to have. sda & sdb RAID1 to produce md1 md1 partitioned md1a /boot non-LVM md1b /boot/efi non-LVM md1c-f LVM containing /, /var, /home, and /swap Well the abbreviations may not be the proper syntax, but you probably get the idea of where I am going. If this is correct, then it looks like I need to create the RAID from the command line of a rescue disk and set the /boot and /boot/efi partitions first before beginning the installer. But then again I could be totally off the mark here so I am looking for someone to set me straight. Thanks. Jeff

3 3

DegradedArray message
by David McGuffey 09 Dec '14

09 Dec '14

Received the following message in mail to root: Message 257: >From root(a)desk4.localdomain Tue Oct 28 07:25:37 2014 Return-Path: <root(a)desk4.localdomain> X-Original-To: root Delivered-To: root(a)desk4.localdomain From: mdadm monitoring <root(a)desk4.localdomain> To: root(a)desk4.localdomain Subject: DegradedArray event on /dev/md0:desk4 Date: Tue, 28 Oct 2014 07:25:27 -0400 (EDT) Status: RO This is an automatically generated mail message from mdadm running on desk4 A DegradedArray event had been detected on md device /dev/md0. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 dm-2[1] 243682172 blocks super 1.1 [2/1] [_U] bitmap: 2/2 pages [8KB], 65536KB chunk md1 : active raid1 dm-3[0] dm-0[1] 1953510268 blocks super 1.1 [2/2] [UU] bitmap: 3/15 pages [12KB], 65536KB chunk unused devices: <none> & q Held 314 messages in /var/spool/mail/root You have mail in /var/spool/mail/root Ran a madam query against both raid partitions: [root@desk4 ~]# mdadm --query --detail /dev/md0 /dev/md0: Version : 1.1 Creation Time : Thu Nov 15 19:24:17 2012 Raid Level : raid1 Array Size : 243682172 (232.39 GiB 249.53 GB) Used Dev Size : 243682172 (232.39 GiB 249.53 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Tue Dec 2 20:02:55 2014 State : active, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : desk4.localdomain:0 UUID : 29f70093:ae78cf9f:0ab7c1cd:e380f50b Events : 266241 Number Major Minor RaidDevice State 0 0 0 0 removed 1 253 3 1 active sync /dev/dm-3 [root@desk4 ~]# [root@desk4 ~]# mdadm --query --detail /dev/md1 /dev/md1: Version : 1.1 Creation Time : Thu Nov 15 19:24:19 2012 Raid Level : raid1 Array Size : 1953510268 (1863.01 GiB 2000.39 GB) Used Dev Size : 1953510268 (1863.01 GiB 2000.39 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Tue Dec 2 20:06:21 2014 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Name : desk4.localdomain:1 UUID : 1bef270d:36301a24:7b93c7a9:a2a95879 Events : 108306 Number Major Minor RaidDevice State 0 253 0 0 active sync /dev/dm-0 1 253 1 1 active sync /dev/dm-1 [root@desk4 ~]# Appears to me that device 0 (/dev/dm-2) on md0 has been removed because of problems. This is my first encounter with a raid failure. I suspect I should replace disk 0 and let the raid rebuild itself. Seeking guidance and a good source for the procedures. Dave M

10 12

Re: [CentOS] Postfix avc (SELinux)
by James B. Byrne 09 Dec '14

09 Dec '14

On Mon, December 8, 2014 20:01, Daniel J Walsh wrote: > > rpm -q selinux-policy > > selinux-policy-3.7.19-260.el6 is the current policy in development. >> Thank you. >>>> #============= postfix_showq_t ============== >>>> allow postfix_showq_t tmp_t:dir read; >>> Any reason postfix would be listing the contents of /tmp or /var/tmp? >>> Did you put some content into these directories that have something to >>> do with mail? >> That question I need put to the Postfix mailing list. I see nothing in the >> spec file that bears on the matter and the tarball was pulled from: >> >> ftp://ftp.porcupine.org/mirrors/postfix-release/official/ >> >>>> #============= postfix_smtp_t ============== >>>> allow postfix_smtp_t postfix_spool_maildrop_t:file { read write getattr }; >>>> >>>> I do not know why my build of Postfix is looking in /tmp. According to Wietse Venema the base Postfix tarball does not access /tmp at all. So it must be one of the patches, but I have not yet uncovered which one. In any case, this raises the question: Why would any program not have access to /tmp? Is not that what /tmp is for, a scratchpad for programs? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Can't create an account on bugs.centos.org
by samuel 09 Dec '14

09 Dec '14

Hi, I want to report a bug on bugs.centos.org. But I'm unable to register a new account. The register page keeps returning: Session variable 'captcha_key' not found. I have tried with several browsers (even internet explorer :o ) but all give the same result. Regards, SV.

3 3

CentOS-announce Digest, Vol 118, Issue 5
by centos-announce-request＠centos.org 09 Dec '14

09 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1962 CentOS 7 libpcap BugFix Update (Johnny Hughes) 2. CEBA-2014:1963 CentOS 7 NetworkManager BugFix Update (Johnny Hughes) 3. CEBA-2014:1966 CentOS 7 spice BugFix Update (Johnny Hughes) 4. CEBA-2014:1961 CentOS 6 system-config-firewall BugFix Update (Johnny Hughes) 5. CEBA-2014:1964 CentOS 6 selinux-policy BugFix Update (Johnny Hughes) 6. CEBA-2014:1965 CentOS 6 curl BugFix Update (Johnny Hughes) 7. CEEA-2014:1968 CentOS 6 nc FASTTRACK Enhancement Update (Johnny Hughes) 8. CEBA-2014:1967 CentOS 6 sssd BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 8 Dec 2014 13:31:06 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1962 CentOS 7 libpcap BugFix Update Message-ID: <20141208133106.GA16961(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1962 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1962.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b7910b090c7e3d0e76895c1d7a097ca0e41d2b000d56c166e174bf2dda80f58e libpcap-1.5.3-3.el7_0.1.i686.rpm ab29de2ed250083b4a36216bb52925c3506166cbb4a2c1765a111cc1fa0c245e libpcap-1.5.3-3.el7_0.1.x86_64.rpm c020577b27ec679ca0446b5db52c3a4530d17f5da92a1cd133595bdf285c79d7 libpcap-devel-1.5.3-3.el7_0.1.i686.rpm c74c027074ed88de863c21700e9c11abc69b7c779a9e6b77f5fb78f022ad05dc libpcap-devel-1.5.3-3.el7_0.1.x86_64.rpm Source: 583f3d3761e4a0d620b7db5b8485c7edff83f86184270dc4e27955c4ec106e67 libpcap-1.5.3-3.el7_0.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 8 Dec 2014 13:31:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1963 CentOS 7 NetworkManager BugFix Update Message-ID: <20141208133124.GA17056(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1963 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1963.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 288e14a5e70feb1bc6e0523d0f3bf66cadb30147b001ab43e5965f3f6e460a2b NetworkManager-0.9.9.1-29.git20140326.4dba720.el7_0.i686.rpm 44c7dac9684c12d9ee7d00010703521c70e47629f7175f71f274ba69ae0fccca NetworkManager-0.9.9.1-29.git20140326.4dba720.el7_0.x86_64.rpm 180025acb45caf6caa2380707acb053a855d1b431a7e2d57c8f6cf7c240b606a NetworkManager-config-server-0.9.9.1-29.git20140326.4dba720.el7_0.x86_64.rpm b62284b05432118c4648033251799e05178ccf0e0bf3ada7ab4bc812d6eb72f6 NetworkManager-devel-0.9.9.1-29.git20140326.4dba720.el7_0.i686.rpm 2e0536c2de5c06b5fb3e54a34712be73558ef8df3152928ac11a91d4a033a62d NetworkManager-devel-0.9.9.1-29.git20140326.4dba720.el7_0.x86_64.rpm 6eb42bf294a3f59c5100117c8915e5f07178ad895f9e63ac203633ce3ec092e4 NetworkManager-glib-0.9.9.1-29.git20140326.4dba720.el7_0.i686.rpm 21449b846e0fcb9b8ff25d80c0f4834a6e596bcb37da98b57d7b84a8373b8c91 NetworkManager-glib-0.9.9.1-29.git20140326.4dba720.el7_0.x86_64.rpm c5a5b4f6ece433fda94fe3639c4b0a206fe9b101e605a5fcc817f875479a0d30 NetworkManager-glib-devel-0.9.9.1-29.git20140326.4dba720.el7_0.i686.rpm 5f883b4d3dc4ff94248b5cbf29145aa1fb11229c9ef1cde3103bb7ab20da9268 NetworkManager-glib-devel-0.9.9.1-29.git20140326.4dba720.el7_0.x86_64.rpm 81fb6406f4c248559c03c25fb6df19d4295362b045efe744d46738af037b2db2 NetworkManager-tui-0.9.9.1-29.git20140326.4dba720.el7_0.x86_64.rpm Source: 4d2bad8615d94df4cee0a4fa810c8ec2ef6e5daec172c1cc61224de2f8c8d84c NetworkManager-0.9.9.1-29.git20140326.4dba720.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 8 Dec 2014 13:31:34 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1966 CentOS 7 spice BugFix Update Message-ID: <20141208133134.GA17115(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1966 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1966.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d9262132d3b803ad205d09e08512429f65ab96cadd4e91a8d5f6c9ac0f3c117d spice-server-0.12.4-5.el7_0.1.x86_64.rpm d5b17cc618638050aa592bde0e474ae0820002c942af733d8a1c9c4e5f122495 spice-server-devel-0.12.4-5.el7_0.1.x86_64.rpm Source: e058b182fc9655c8bb35f08db6690c993bd9be5a871b55aa76213dd2ad2a37f3 spice-0.12.4-5.el7_0.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 8 Dec 2014 13:32:45 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1961 CentOS 6 system-config-firewall BugFix Update Message-ID: <20141208133245.GA17383(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1961 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1961.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 76941a8d25344b05dfbd9d356de1aaa938f596c42ef5984ce8c8e176d54edd20 system-config-firewall-1.2.27-7.2.el6_6.noarch.rpm 1e39c17fde7ac90e309bdfc0be5c71403e5f9d33f98edff07b67dabb5403dfdf system-config-firewall-base-1.2.27-7.2.el6_6.noarch.rpm 997a2bd567fae9151ae4849350bb2077ba6de68b0458da7efa6bc4a0b57ac170 system-config-firewall-tui-1.2.27-7.2.el6_6.noarch.rpm x86_64: 76941a8d25344b05dfbd9d356de1aaa938f596c42ef5984ce8c8e176d54edd20 system-config-firewall-1.2.27-7.2.el6_6.noarch.rpm 1e39c17fde7ac90e309bdfc0be5c71403e5f9d33f98edff07b67dabb5403dfdf system-config-firewall-base-1.2.27-7.2.el6_6.noarch.rpm 997a2bd567fae9151ae4849350bb2077ba6de68b0458da7efa6bc4a0b57ac170 system-config-firewall-tui-1.2.27-7.2.el6_6.noarch.rpm Source: aa1600115b62ca43978edb4e30313bb98dca5990f3f3a1da86f83a27f4531f48 system-config-firewall-1.2.27-7.2.el6_6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 8 Dec 2014 13:34:14 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1964 CentOS 6 selinux-policy BugFix Update Message-ID: <20141208133414.GA17705(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1964 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1964.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fa1560968aea639772d5960a2796d7022e3d1c58a09bebffd2824249aea26b96 selinux-policy-3.7.19-260.el6_6.1.noarch.rpm 9368526010e071b8bdb5c6e72cdd4bd3a6443da6d6807f03edba36ddc3e6e46d selinux-policy-doc-3.7.19-260.el6_6.1.noarch.rpm 31210d50e729f455219779c778a2bb52e2c9ddbc4a19b133339f776b90cfb810 selinux-policy-minimum-3.7.19-260.el6_6.1.noarch.rpm 1303399aeae7d95abe9424efbbeb453d556a50cbdf9d57c2a026aea8e3fc9ccc selinux-policy-mls-3.7.19-260.el6_6.1.noarch.rpm f5328b054f2c671405cb1ee266e874ed49e9e73f7a68b9b072563f6222e41723 selinux-policy-targeted-3.7.19-260.el6_6.1.noarch.rpm x86_64: fa1560968aea639772d5960a2796d7022e3d1c58a09bebffd2824249aea26b96 selinux-policy-3.7.19-260.el6_6.1.noarch.rpm 9368526010e071b8bdb5c6e72cdd4bd3a6443da6d6807f03edba36ddc3e6e46d selinux-policy-doc-3.7.19-260.el6_6.1.noarch.rpm 31210d50e729f455219779c778a2bb52e2c9ddbc4a19b133339f776b90cfb810 selinux-policy-minimum-3.7.19-260.el6_6.1.noarch.rpm 1303399aeae7d95abe9424efbbeb453d556a50cbdf9d57c2a026aea8e3fc9ccc selinux-policy-mls-3.7.19-260.el6_6.1.noarch.rpm f5328b054f2c671405cb1ee266e874ed49e9e73f7a68b9b072563f6222e41723 selinux-policy-targeted-3.7.19-260.el6_6.1.noarch.rpm Source: b86ace9476499e149195ed1bc02bdfd1b5b4bed3031bb7272c65791fb47bd96d selinux-policy-3.7.19-260.el6_6.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 8 Dec 2014 13:35:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1965 CentOS 6 curl BugFix Update Message-ID: <20141208133504.GA17979(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1965 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1965.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b24cd2fa431a60f77d4aef8a6fa8b15a7517637b39800113b9b50e6c87cc72b9 curl-7.19.7-40.el6_6.3.i686.rpm 68934a1b7da7c0021f6b01cc4be54ebc7ab2738f1d546c868678cf182c7df8b2 libcurl-7.19.7-40.el6_6.3.i686.rpm c061794b0ec4d7a5354afd68a97ed67e1952cce89863fa135c4ece085271fb71 libcurl-devel-7.19.7-40.el6_6.3.i686.rpm x86_64: c91ba3715411b18d67a800f25645bb0e8699342461ddc2af767f931caac62979 curl-7.19.7-40.el6_6.3.x86_64.rpm 68934a1b7da7c0021f6b01cc4be54ebc7ab2738f1d546c868678cf182c7df8b2 libcurl-7.19.7-40.el6_6.3.i686.rpm 358d38995a6d1a29e16891e70f8d89dc358c07130cfc3fa34d8a57aed7e014ea libcurl-7.19.7-40.el6_6.3.x86_64.rpm c061794b0ec4d7a5354afd68a97ed67e1952cce89863fa135c4ece085271fb71 libcurl-devel-7.19.7-40.el6_6.3.i686.rpm ad12877a4d92cf8673fa373945f85e6aab90ab168ae0a0ba8f81602467bfee1a libcurl-devel-7.19.7-40.el6_6.3.x86_64.rpm Source: 822e832d08733883f80c58d8f9716c4d7d6fd178b3b5fd101d31953e9148cf9b curl-7.19.7-40.el6_6.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Mon, 8 Dec 2014 13:35:46 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2014:1968 CentOS 6 nc FASTTRACK Enhancement Update Message-ID: <20141208133546.GA18195(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2014:1968 Upstream details at : https://rhn.redhat.com/errata/RHEA-2014-1968.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ee347651b5b3dbb690c6e3c160a7ac755e47b188ad079a6938d7cc2977c6cafa nc-1.84-24.el6.i686.rpm x86_64: 330705fa1c58bde1f01d8798244e98516e5b10c59e096c41637ea87aa350419c nc-1.84-24.el6.x86_64.rpm Source: 953e84d6697d4d62f2472d5cbc40af537e2b69c8a4ac6c9662f2a5219790fdf6 nc-1.84-24.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Mon, 8 Dec 2014 13:36:23 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1967 CentOS 6 sssd BugFix Update Message-ID: <20141208133623.GA18908(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1967 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1967.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9fdba662b86697d42d08e30213fe9d2d181b1cffe4fec7d38933eb5fb6aac4ed libipa_hbac-1.11.6-30.el6_6.3.i686.rpm f9d9b2dc408964a44cccbedbbf1c27ffc41a9f0e3287b75a9f9f2d5fe78f4e51 libipa_hbac-devel-1.11.6-30.el6_6.3.i686.rpm 462f6585cd2d2ada84742a1b35bbdab2182385c3006b33ce6b0898157d7601d3 libipa_hbac-python-1.11.6-30.el6_6.3.i686.rpm c86744613d5283090d89c0407f51afca03cceb2d10acc3de11589446f5d19fce libsss_idmap-1.11.6-30.el6_6.3.i686.rpm df62fbfa438204154359e9b9007ce9dfce816ffe3abb1d85ae49a6bd953dbb9c libsss_idmap-devel-1.11.6-30.el6_6.3.i686.rpm 93300da5349454260090d9f77ba4eae0e12c2e88cc79a22768b3bee37e06586a libsss_nss_idmap-1.11.6-30.el6_6.3.i686.rpm c33e25c5eaf6952c193a62c2bb0144a612812c459a729f1cac8715ea55edd1de libsss_nss_idmap-devel-1.11.6-30.el6_6.3.i686.rpm 50a87613b7df65d464611e6b55348fe5265b763f419877518cb7314d0bf5dcad libsss_nss_idmap-python-1.11.6-30.el6_6.3.i686.rpm 64d3708ac824a3d9580a6b984c8bba1b22e6ea10a620a21b9c385bbc8540acae python-sssdconfig-1.11.6-30.el6_6.3.noarch.rpm 43625e2482666719b1acedd97d0ee1ce2df40d39ffbe611a3d06c8ec700eac1b sssd-1.11.6-30.el6_6.3.i686.rpm c72d8a7cbfc4cf0970bc0d7fdb9670042fc4a64a26fec8768860a99ca8ef3c4e sssd-ad-1.11.6-30.el6_6.3.i686.rpm 68b38de91ccc7bb98f30c7ee75c03bb4f6b6c4bec3d74205fe884cf53be23966 sssd-client-1.11.6-30.el6_6.3.i686.rpm a44b4e982db423b1be5217e960edb07ce103bb0bd50b00259d5d78139deb8c0d sssd-common-1.11.6-30.el6_6.3.i686.rpm c21dca5054791d4974f2c0d4cce2af1bdbf0680bfb5ef1423ab94904c31acfd6 sssd-common-pac-1.11.6-30.el6_6.3.i686.rpm c2202be85369cb1e39ac89a052bf3bc80aab082ea2a9e4a8a73de5440a2da7aa sssd-dbus-1.11.6-30.el6_6.3.i686.rpm 63f2126d414ce725c89a9feb59e2cd20192cca8f093cd17a868adb41007ada71 sssd-ipa-1.11.6-30.el6_6.3.i686.rpm 4f81721de37915e281e48a56d85e7988abdb7e48facc907ba52c09c455bdab65 sssd-krb5-1.11.6-30.el6_6.3.i686.rpm f168f575ca6b73615b2cffd8ede4dc4c7d556da9d5ba36d6936130150287d6ee sssd-krb5-common-1.11.6-30.el6_6.3.i686.rpm 9b327b36050d7350b50f561358b1b4a2516837e0360cfd42bb70243c2a8c1ad3 sssd-ldap-1.11.6-30.el6_6.3.i686.rpm 74d0f2d555dc65b8e18523a39614ec1adf880ce0526d84b08bc7e9b1cccf993b sssd-proxy-1.11.6-30.el6_6.3.i686.rpm d552e0c05950ecc6b9994a0d3be62bbd9f8aa4b949104f850e256857ec6f8cff sssd-tools-1.11.6-30.el6_6.3.i686.rpm x86_64: 9fdba662b86697d42d08e30213fe9d2d181b1cffe4fec7d38933eb5fb6aac4ed libipa_hbac-1.11.6-30.el6_6.3.i686.rpm 435e0776f5e87f0502698ee55d0bb31efeef1422c69aacb021620461cc7bfc53 libipa_hbac-1.11.6-30.el6_6.3.x86_64.rpm f9d9b2dc408964a44cccbedbbf1c27ffc41a9f0e3287b75a9f9f2d5fe78f4e51 libipa_hbac-devel-1.11.6-30.el6_6.3.i686.rpm 6cd02168049679a72c6db5f2d9f11a95c75605e0f56d16295326602c55dbd575 libipa_hbac-devel-1.11.6-30.el6_6.3.x86_64.rpm ea0b1bb74c77b523decc5b83c0c68e1beb24b61be65fd7db3faec6bdcef0d3fe libipa_hbac-python-1.11.6-30.el6_6.3.x86_64.rpm c86744613d5283090d89c0407f51afca03cceb2d10acc3de11589446f5d19fce libsss_idmap-1.11.6-30.el6_6.3.i686.rpm 84ad0a3b1b77aa56d6c3edd6c35eee06208a79bf694a8459f7019f197e7f00fa libsss_idmap-1.11.6-30.el6_6.3.x86_64.rpm df62fbfa438204154359e9b9007ce9dfce816ffe3abb1d85ae49a6bd953dbb9c libsss_idmap-devel-1.11.6-30.el6_6.3.i686.rpm 7438eaf773bc499a29cd207ddeead83a0ce2943953e1ed105ea3e39d2d941ed9 libsss_idmap-devel-1.11.6-30.el6_6.3.x86_64.rpm 93300da5349454260090d9f77ba4eae0e12c2e88cc79a22768b3bee37e06586a libsss_nss_idmap-1.11.6-30.el6_6.3.i686.rpm 9ee0197934a6a303ec9445f5abe59b8f707dc0f78252a3f5b4ef279430d0353a libsss_nss_idmap-1.11.6-30.el6_6.3.x86_64.rpm c33e25c5eaf6952c193a62c2bb0144a612812c459a729f1cac8715ea55edd1de libsss_nss_idmap-devel-1.11.6-30.el6_6.3.i686.rpm 1666eb0ba65490cf7015a68be95be3a8727a2e67ddb897ba00c600ba14f38919 libsss_nss_idmap-devel-1.11.6-30.el6_6.3.x86_64.rpm b204a2da6f3de49e861579a7e7905676a29932ccca1cda2b2b31e5221d30696e libsss_nss_idmap-python-1.11.6-30.el6_6.3.x86_64.rpm 64d3708ac824a3d9580a6b984c8bba1b22e6ea10a620a21b9c385bbc8540acae python-sssdconfig-1.11.6-30.el6_6.3.noarch.rpm b494d60fa8341ff8d559857ccab4e74667d4d872c032c20a884983163864c037 sssd-1.11.6-30.el6_6.3.x86_64.rpm bf9be1883286f6bd26d3a9c86e2f5d36920107077533c8c6c9582e1cf24c6e3b sssd-ad-1.11.6-30.el6_6.3.x86_64.rpm 68b38de91ccc7bb98f30c7ee75c03bb4f6b6c4bec3d74205fe884cf53be23966 sssd-client-1.11.6-30.el6_6.3.i686.rpm 36e6a2dd88a56d4b4f43e7f4727e9e80b6d6bd6cef5058307522ce78fbfcad18 sssd-client-1.11.6-30.el6_6.3.x86_64.rpm a44b4e982db423b1be5217e960edb07ce103bb0bd50b00259d5d78139deb8c0d sssd-common-1.11.6-30.el6_6.3.i686.rpm ad1a1622c8765ed14257f860fb948e17a54c13c51e0ae91785d38018e7343359 sssd-common-1.11.6-30.el6_6.3.x86_64.rpm 9e4c2ef05946267acf96a0d32e0035759eaaec680c378327309b678de73575ee sssd-common-pac-1.11.6-30.el6_6.3.x86_64.rpm b490b268f9186ad78107840ff3871447649d48d5a26dafd5cd2d11b936e16ef6 sssd-dbus-1.11.6-30.el6_6.3.x86_64.rpm e77458a336ace60b0edfd4360766696e7dd5bb7c0cfaaf76863bf126d3d12eda sssd-ipa-1.11.6-30.el6_6.3.x86_64.rpm 9bb9e3c9e29d74c22be6973952cad7d29ae18c5b078ca6a1ddb87b665727f44c sssd-krb5-1.11.6-30.el6_6.3.x86_64.rpm 728214e0214b805a2a6a1fc9aee90e091520af13b806149f4f2b025c9489f662 sssd-krb5-common-1.11.6-30.el6_6.3.x86_64.rpm 795a96697fa2d796fbad2c38787a18b58e23d7ee42b7c1f486e9518f4a3fe4d1 sssd-ldap-1.11.6-30.el6_6.3.x86_64.rpm 9c7871d84b86527d99e72de405919832462579939f0eccff2dc1ac540f438f1d sssd-proxy-1.11.6-30.el6_6.3.x86_64.rpm d8f4bc8eb317612b35f96709d8562c96e6bdf3ffee5cb6182d25254ac3b6af54 sssd-tools-1.11.6-30.el6_6.3.x86_64.rpm Source: de8652433eee6bc2f5b0377f1e9ba276ff6a6cc60019888cb9081222cba63502 sssd-1.11.6-30.el6_6.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 5 ***********************************************

1 0

Re: [CentOS] gdm doesnt work.
by dE 09 Dec '14

09 Dec '14

On 12/08/14 22:02, m.roth(a)5-cent.us wrote: > dE wrote: >> Hi! >> >> I just installed GDM on centos 7. I'm starting it by # gdm. >> >> However, all I see is a text cursor (as with the TTYs), nothing else. >> >> X works well. Logs have no errors. >> >> GDM logs are a copy of X logs. > Are you at runlevel 5? > > mark > I tried isolate graphical.target also.

2 2

CentOS 6.6 KVM Windows 7 Pro VM Device USB 04e8:6860
by Paul R. Ganci 09 Dec '14

09 Dec '14

I have a CentOS 6.6 system running KVM with a Win 7 Pro VM. Over the weekend I was playing around with the VM trying to get it to see my Samsung Note 4. Apparently I removed the phone without removing the hardware from the VM. Now the VM will not start because Device USB 0438:6860 is not there. I tried to remove the hardware from the VM using virt-manager but that does not remove the error message and the VM will still not start. I did manage to get the phone to be recognized as Device USB 04e8:6860 at one point but then the VM would not start because the Device was "already in use." I presently seem to have the VM in a state where the phone is now Device USB 04e8:6865 but the VM will not start because of the missing USB 04e8:6860. A Google search did not seem to provide anything useful. Is there anyway to get this VM to start ... for example can I tell it to ignore the USB device? Can I somehow manually remove Device 04e8:6860? I cannot believe I have to re-install just because of a missing USB device. Thanks for any help. -- Paul (ganci(a)nurdog.com)

2 2

Postfix avc (SELinux)
by James B. Byrne 09 Dec '14

09 Dec '14

I am seeing these avc messages on a newly commissioned and up-to-date CentOs-6 virtual guest: ---- time->Thu Dec 4 12:14:58 2014 type=SYSCALL msg=audit(1417713298.610:60522): arch=c000003e syscall=2 success=no exit=-13 a0=7fd70e6de1e6 a1=0 a2=1b6 a3=0 items=0 ppid=2698 pid=4294 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2784 comm="trivial-rewrite" exe="/usr/libexec/postfix/trivial-rewrite" subj=unconfined_u:system_r:postfix_master_t:s0 key=(null) type=AVC msg=audit(1417713298.610:60522): avc: denied { read } for pid=4294 comm="trivial-rewrite" name="tmp" dev=dm-0 ino=393240 scontext=unconfined_u:system_r:postfix_master_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=dir We are using a locally built Postfix (Postfix-2.8+ is required to support postscreen and CentOS only provides 2.6.6) rpm -qi postfix Name : postfix Relocations: (not relocatable) Version : 2.11.1 Vendor: (none) Release : 0.el6 Build Date: Thu May 15 14:38:25 2014 Install Date: Fri Nov 28 14:57:25 2014 Build Host: xnet242.hamilton.harte-lyne.ca Group : System Environment/Daemons Source RPM: postfix-2.11.1-0.el6.src.rpm Size : 13111458 License: IBM Signature : (none) URL : http://www.postfix.org Summary : Postfix Mail Transport Agent Description : Postfix is a Mail Transport Agent (MTA), supporting LDAP, SMTP AUTH (SASL), TLS Re: SELinux. Do I just build a local policy or is there some boolean setting needed to handle this? I could not find one if there is but. . . getsebool -a | grep postfix allow_postfix_local_write_mail_spool --> on -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 5

how to config printing on C7 installed from live image
by Fred Smith 08 Dec '14

08 Dec '14

Hi All! I've just done a test installation (on an external USB HD) to see how C7 works on my Acer Aspire netbook. Apparently the live install (I used this one: CentOS-7.0-1406-x86_64-livecd.iso) does not install CUPS. I've done "yum install cups" and got a ton of stuff installed, but it won't let me set up a printer in the printing applet in either Gnome or MATE (I prefer Mate). Adding a printer is greyed out, and I get told there is no server running. I thought I needed to start the printer service (cupsd???) but I can't find the system-config-services (or whatever it's named, if not that) app either. Also haven't found a systemd config for cups, either. I've tried adding /usr/sbin/cupsd to the system startup programs list, but that doesn't seem to help either. Obviously I'm overlooking something, and I'd appreciate a (helpful) slap upside the head, i.e., a gentl hint of where I've gone wrong. thanks a lot! Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "Not everyone who says to me, 'Lord, Lord,' will enter the kingdom of heaven, but only he who does the will of my Father who is in heaven." ------------------------------ Matthew 7:21 (niv) -----------------------------

3 5

10 Gbps adapter recommendation
by Nux! 08 Dec '14

08 Dec '14

Hi guys, I'm yet to use 10 Gbps with CentOS, hence my question. I'm looking for a cheap (doh) adapter that won't cause me problems with CentOS. Any recommendations? Cheers Lucian -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro

3 2

gdm doesnt work.
by dE 08 Dec '14

08 Dec '14

Hi! I just installed GDM on centos 7. I'm starting it by # gdm. However, all I see is a text cursor (as with the TTYs), nothing else. X works well. Logs have no errors. GDM logs are a copy of X logs.

1 0

Restore Point for Centos 7
by Samson 05 Dec '14

05 Dec '14

Hi all, Just want to inquire if it is possible to create restore points for Centos 7 like we have in virtual machines and window. If possible, kindly advise. Thanks.

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2014