Discuss February 2014

discuss@lists.centos.org

172 participants
155 discussions

HP "smart array"
by m.roth＠5-cent.us 26 Feb '14

26 Feb '14

Not so much...and hpacucli is actively user hostile. I finally connected and woke up the box (and who, in their right minds, puts the power on button on a rackmount RAID box in the *back* of the box?), and I'm trying to create one large RAID 6. But... ctrl slot=3 show config is incredibly bizarre. It shows me my physical drives... but starts at 9, and for everything up to 18, shows two of the same port (2E:1:xx), then the rest only once. So I created the raid, using a range, and telling it to leave the last drive. That seemed to work, and I added that one as a spare, it looked ok... except it's telling me that 11-18 are unassigned... even though what shows as in the array are all in there twice, up through 18, as before. Does anyone understand this behavior? mark

1 0

Dual Band Wireless
by Joseph Hesse 26 Feb '14

26 Feb '14

Hi, Because of heavy interference in the 2.5GHz range in my neighbourhood, I want to switch to wireless dual band (5GHZ) and wireless ac. Do you have any suggestions for USB wireless adapters for CentOS 6.5 that work with dual band and ac? Also, if you have any suggestions on wireless routers for these bands I would like to hear about them. Thank you, Joe

3 2

Re: [CentOS] Migration from 32 to 64 bits
by Les Mikesell 26 Feb '14

26 Feb '14

On Tue, Feb 25, 2014 at 12:28 PM, Steve Clark <sclark(a)netwolves.com> wrote: > On 02/25/2014 01:17 PM, Fabrizio Di Carlo wrote: >> Hello to all, >> >> currently I have CentOS 6.4 32 bit, very simple setup on my notebook, >> I want to migrate it from 32 to 64 bits cause I want to play with some >> VMs etc etc. >> >> Do you have some suggestions on how to do backup of folders (mainly I >> have 1 user) or just copy the user folder and stop? >> >> Fabrizio >> > Hmmm... we have 32bit CentOS 6.3 running both 32bit and 64bit VirtualBox VMs just fine. Yes, if you want to use KVM you'd need a 64-bit install, but for VirtualBox or VMware Player it should only depend on the CPU capability, not the host OS. -- Les Mikesell lesmikesell(a)gmail.com

5 6

Re: [CentOS] Static routing on CentOS
by Steven Tardy 26 Feb '14

26 Feb '14

Something on that subnet will need to know how to accept and forward the packet to the correct destination: the router/gw will still have to have a route added. > On Feb 26, 2014, at 9:24 AM, Steve Clark <sclark(a)netwolves.com> wrote: > > Actually you can by adding a route via the interface > ip r a 20.20.20.0/24 dev eth0

2 1

Static routing on CentOS
by Jatin Davey 26 Feb '14

26 Feb '14

Hi All I have two hosts. Host A and Host B Host A routing table ------------------------ [root@localhost ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.29.110.0 172.29.109.1 255.255.255.0 UG 0 0 0 eth0 172.29.109.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 172.29.109.1 0.0.0.0 UG 0 0 0 eth0 HOST A IP address : 172.29.109.254 Host B routing table ------------------------- [jatin@localhost ~]$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.29.110.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 20.20.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 172.29.110.1 0.0.0.0 UG 0 0 0 eth0 HOST B Ip address : 172.29.110.93 Host B basically houses some simulated devices which are configured in the ip address range of 20.20.20.1 to 20.20.20.254. The netmask being used here is 255.255.255.0 I want to configure a static route on HOST A so that they can reach the simulated devices running on HOST B which are in the ip address range 20.20.20.1-20.20.20.254 , I am trying the following command but it does not configure the static route for me. [root@localhost ~]# route add -net 20.20.20.0 netmask 255.255.255.0 gw 172.29.110.93 SIOCADDRT: Network is unreachable Any help is greatly appreciated. Thanks Jatin

5 4

OT: Howto to capture taskset output command
by C. L. Martinez 26 Feb '14

26 Feb '14

Hi all, I am trying to set processor affinity for a specific process using a shell script without result. Script: #!/bin/sh -x cpu_affinity_ok="2" cpu_affinity="taskset -p -c `cat /tmp/test.pid` | awk '{print $6}'" if [ -f /tmp/test.pid ]; then if [ "$cpu_affinity" == "$cpu_affinity_ok" ]; then exit 0 else taskset -p -c 2 `cat /tmp/test.pid` fi fi This script doesn't works: [root@cos01 bin]# taskset -p -c 27756 pid 27756's current affinity list: 2 Excecuting script: [root@cos01 bin]# ./my_cpu_affinitty + cpu_affinity_ok=2 ++ cat /tmp/test.pid + cpu_affinity='taskset -p -c 27756 | awk '\''{print }'\''' + '[' -f /tmp/test.pid ']' + '[' 'taskset -p -c 27756 | awk '\''{print }'\''' == 2 ']' ++ cat /tmp/test.pid + taskset -p -c 2 27756 pid 27756's current affinity list: 2 pid 27756's new affinity list: 2 As you can see, function compare under "if" statement doesn't works ... Any idea?? Thanks.

5 7

Upgrading to CentOS 6
by Styma, Robert E (Robert) 26 Feb '14

26 Feb '14

I recently built a CentOS 6 system as my main machine at home. With a bit of help from members of this list, it is now working better than the machine it replaced (RIP). The new machine works so well, that I would like to convert some CentOS 5 machines to CentOS6. I did some research on the web and the new install is still considered the proper way to upgrade CentOS. Same as Fedora and RHEL. The question becomes, "What makes the Ubuntu developers so clever that they can do major upgrades through their apt based update system?" There must be some sort of gotcha or tradeoff involved in allowing this. Does anyone have any insights on why they can get away with this while CentOS cannot?

3 3

CentOS-announce Digest, Vol 108, Issue 14
by centos-announce-request＠centos.org 26 Feb '14

26 Feb '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:X006 Xen4CentOS kernel bugfix Update (Johnny Hughes) 2. CESA-2014:X007 Moderate Xen4CentOS xen Security Update (Johnny Hughes) 3. CESA-2014:0211 Important CentOS 5 postgresql84 Update (Johnny Hughes) 4. CESA-2014:0211 Important CentOS 6 postgresql Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 25 Feb 2014 15:37:57 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:X006 Xen4CentOS kernel bugfix Update To: CentOS-announce(a)centos.org Message-ID: <20140225153757.GA47597(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:X006 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 99609095645c86a8b6fcee4abd01da4366d9d73307be262dd82c735d6ea60014 e1000e-2.5.4-3.10.32.2.el6.centos.alt.x86_64.rpm e3637c9f6e36bac51da78641c7a4638742ecbdbbafa728a856edfe1548749ba6 kernel-3.10.32-11.el6.centos.alt.x86_64.rpm 2103b414398ce55cfb42bfea6316db7a96bdba505ff34c1b6eeef0d9e5d006e2 kernel-devel-3.10.32-11.el6.centos.alt.x86_64.rpm 6032b29f8895dbe487308fb3d4f12d6b3b02a051c6c29fe5b29e4623247c7491 kernel-doc-3.10.32-11.el6.centos.alt.noarch.rpm c090b1fa4842f26965935566e5cbf010230db6359473bf375b9d6a022773783e kernel-firmware-3.10.32-11.el6.centos.alt.noarch.rpm 5d5d66d30c32a586cbcce74a6ba1b45f98c7c24cb338de4b5cd64532fb2ad75d kernel-headers-3.10.32-11.el6.centos.alt.x86_64.rpm 6bcb07455d1c3d41b44b1163e7da228a2ec7ace336665e14367d7f8258fb8a92 perf-3.10.32-11.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- 92c5b2feb51a77a01de79c03ee3a7d6a07438c50045ed3b0f1224c7ae50dae69 e1000e-2.5.4-3.10.32.2.el6.centos.alt.src.rpm 765168d4a6ad0dbcf609c53b1dc07d8eb7364a6be463e562421509a2e008808e kernel-3.10.32-11.el6.centos.alt.src.rpm ===================================================== Kernel Changelog info from the SPEC file: * Sun Feb 23 2014 Johnny Hughes <johnny(a)centos.org> - 3.10.32-11 - upgrade to upstream 3.10.32 e1000e Changelog info from the SPEC file: * Sun Feb 23 2014 Johnny Hughes <johnny(a)centos.org> - 2.5.4-3.10.32.2.el6.centos.alt - build against version 3.10.32 kernel ===================================================== The following kernel changelogs are available from kernel.org since the previous kernel: https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.32 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.31 https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.30 ===================================================== The following security issues are addressed in this update: NONE (bugfix release only) ===================================================== NOTE: You must run /usr/bin/grub-bootxen.sh to update the file /boot/grub/grub.conf (or you must update that file manually) to boot the new kernel on a dom0 xen machine. See for info: http://wiki.centos.org/HowTos/Xen/Xen4QuickStart -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 2 Date: Tue, 25 Feb 2014 15:38:13 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:X007 Moderate Xen4CentOS xen Security Update To: CentOS-announce(a)centos.org Message-ID: <20140225153813.GA47603(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:X007 (Xen4CentOS) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 15f776704e68192108e8e407a6e6d0286c2551a424c67784a8cc4a9169181079 xen-4.2.4-29.el6.centos.alt.x86_64.rpm 3330715e1f48dc0aa979f81ba841d0e087b05bd5da13c109dcb1d3b3381fc300 xen-devel-4.2.4-29.el6.centos.alt.x86_64.rpm 639f1998ca247f17cd06c26919e2eac6924266552758bac0300211046b27789f xen-doc-4.2.4-29.el6.centos.alt.x86_64.rpm 73e9a9c449a10d77b4b6cf95b2d2fa4e6d5950de5e1e1b514f93cafd2ebb5769 xen-hypervisor-4.2.4-29.el6.centos.alt.x86_64.rpm f78fb75de78d9898462eecfa30dbb03e8eac7ea1726d3c1ac059b857f806282f xen-libs-4.2.4-29.el6.centos.alt.x86_64.rpm 8cec09d45662b028252ea1dee4da99fb85af0942ab5112e6909512de1899850c xen-licenses-4.2.4-29.el6.centos.alt.x86_64.rpm 33708a684efca8b1824306e3c6375d5f1578363637762a8c6e184b93cbad4518 xen-ocaml-4.2.4-29.el6.centos.alt.x86_64.rpm 140a37e9d57dd05c3b5846bfed1e9638032e47fae7f549c68bfd9956c54fe613 xen-ocaml-devel-4.2.4-29.el6.centos.alt.x86_64.rpm 44f7eec809a5bcb5f7b17bdec8de7e14eb92db8ce0a4909eebb43c0f14e1b2ba xen-runtime-4.2.4-29.el6.centos.alt.x86_64.rpm ----------------------------- Source: ----------------------------- f2adc9f681cf04c62826888d05c2a5c219f7427a875b940676b38c29d77b5c2c xen-4.2.4-29.el6.centos.alt.src.rpm ===================================================== xen Changelog info from the SPEC file: * Sun Feb 23 2014 Johnny Hughes <johnny(a)centos.org> - 4.2.4-29.el6.centos - cleaned up older patches, removed qemu-xen upstream git (Source 100) tarball as it is part of the xen-4.2.4.tar.gz tarball now * Sat Feb 22 2014 Johnny Hughes <johnny(a)centos.org> - 4.2.4-28.el6.centos - upgrade to upstream version 4.2.4 ===================================================== The following Release info is available from the Xen site regarding Xen-4.2.4: http://blog.xen.org/index.php/2014/02/18/announcing-xen-4-3-2-and-4-2-4-rel… -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 3 Date: Tue, 25 Feb 2014 18:39:58 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0211 Important CentOS 5 postgresql84 Update To: centos-announce(a)centos.org Message-ID: <20140225183958.GA20007(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0211 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0211.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9aa9db9f115b70f4c618965603df24f7b07b9927a774f0805370d13337f3ec81 postgresql84-8.4.20-1.el5_10.i386.rpm ad8d61face165aea047692c57a8534d086a037f42af67713f8fcb91e6b164ed2 postgresql84-contrib-8.4.20-1.el5_10.i386.rpm 07b28e6c04587130a90ed9319c3b798dab8873cc24ff7b48b4407c86867a6bf0 postgresql84-devel-8.4.20-1.el5_10.i386.rpm c839783c95847f613b52915eb3bf29d91d1a07787e4c972272ceff33b30ff73f postgresql84-docs-8.4.20-1.el5_10.i386.rpm f0f5503b0c0ad1b251f2fbed4f4ea70d267104de90caced22008f63a282135e6 postgresql84-libs-8.4.20-1.el5_10.i386.rpm d68b6c6d82058071c6ffc327796bb5156b49ce41b774dfcd9e21e3c509a623ed postgresql84-plperl-8.4.20-1.el5_10.i386.rpm 8da2329fae4cbc022ec425c5dc9a53befed4c57b78ef12d41788adbea62789d7 postgresql84-plpython-8.4.20-1.el5_10.i386.rpm f0c47d03c86e197ebf2b799a6967c96b2a2c95ca4898346e7dc43c8755d1cafb postgresql84-pltcl-8.4.20-1.el5_10.i386.rpm b75858dbe1be9462cec501504e7ef9525e352f064d0e5db969e38453cfe9690d postgresql84-python-8.4.20-1.el5_10.i386.rpm 81f53bc4efdbbc3f43b7bf3cfe66503f72fc9133d61d0ddeff3e27e1dddcb815 postgresql84-server-8.4.20-1.el5_10.i386.rpm 0092f1b38f61fb9d5a9ca3584a13492d61139659e469dadebe8c34147ba99585 postgresql84-tcl-8.4.20-1.el5_10.i386.rpm dcb4c4dc2dbd81708a1bb354d0169241e8456b1345a12501f245b795f0c10af3 postgresql84-test-8.4.20-1.el5_10.i386.rpm x86_64: e452a66c22edd6f20b8b86f781f3652a9cb2e7f6d59735031430639fc3aa69ac postgresql84-8.4.20-1.el5_10.x86_64.rpm fb6988db267632337ae90e2acb346e6a98cfd7ea87f7ff124388bf4dc9c7497b postgresql84-contrib-8.4.20-1.el5_10.x86_64.rpm 07b28e6c04587130a90ed9319c3b798dab8873cc24ff7b48b4407c86867a6bf0 postgresql84-devel-8.4.20-1.el5_10.i386.rpm bf26bffd06779eb98a5de6944cc8d50d9baca71b9ac5a3dcfba6601bb51299bc postgresql84-devel-8.4.20-1.el5_10.x86_64.rpm 00e062d46aa5b9f479e428a3cf0f95aebf2b4263b23eae26c4d3abe33da23a54 postgresql84-docs-8.4.20-1.el5_10.x86_64.rpm f0f5503b0c0ad1b251f2fbed4f4ea70d267104de90caced22008f63a282135e6 postgresql84-libs-8.4.20-1.el5_10.i386.rpm d3d847dca42c4dcae76a2aca7ff5982fbb9a85eb2fc387237303c52b13f5aa1b postgresql84-libs-8.4.20-1.el5_10.x86_64.rpm ad5483f5e6232a4c4ca6146f5853b01dde62cd40d2115739db7a0ec7ecd887f7 postgresql84-plperl-8.4.20-1.el5_10.x86_64.rpm 0694196099f6ff8a8e1fd8ba67a612f6ec3bed077e5d893f42cbb711ffe22341 postgresql84-plpython-8.4.20-1.el5_10.x86_64.rpm e6c87437b3685119a65899e8a679375c7aa6f82af51cb7266057cb2d3a9832cd postgresql84-pltcl-8.4.20-1.el5_10.x86_64.rpm 357e3785294ae7afac7232872fe52b6fe68de30fec5584ba04bfd4c7c187766f postgresql84-python-8.4.20-1.el5_10.x86_64.rpm 0173010711b5e3a13ae399a7de719a50deafaf98cadcf6c326ead3093a68b39f postgresql84-server-8.4.20-1.el5_10.x86_64.rpm 2e2bfc61179a1172cbaddec08dc7bc00013871673e60fb41b9cbfbd31bb907b9 postgresql84-tcl-8.4.20-1.el5_10.x86_64.rpm 0305022e4c3571e9baedf4b9153f42ef6d4a1d9229be5138c51f4a5e188ce3f5 postgresql84-test-8.4.20-1.el5_10.x86_64.rpm Source: d4f819ab785741a289c42df5c332bd25d900eedb44bb3382a1d1cdf5de1c11ea postgresql84-8.4.20-1.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 25 Feb 2014 18:43:35 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0211 Important CentOS 6 postgresql Update To: centos-announce(a)centos.org Message-ID: <20140225184335.GA49951(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0211 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0211.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6ca3a1beea5f113655e4abdf43ba3447ae836639bff9381e372bc6cc9d2172ab postgresql-8.4.20-1.el6_5.i686.rpm 3a93327982fbec95696d04999d389bd165df4cedbd09fc313078d2b604ab4448 postgresql-contrib-8.4.20-1.el6_5.i686.rpm 15439f46f6990322e5db410da13c921d0197431d5d649e89b2e0a18c592ebfe2 postgresql-devel-8.4.20-1.el6_5.i686.rpm 5860a013e3da886ef92a0401028d04fed792126fe2b2d6f02e3e32651f5ca022 postgresql-docs-8.4.20-1.el6_5.i686.rpm beb186643ae59aa2f17081ea31223ae45a337bc2904f44eac315792a68bc7934 postgresql-libs-8.4.20-1.el6_5.i686.rpm c3e82e9b38f6f10b9433bb24d10fff5ab5648e47b33931ce03b7f3c5c225fd25 postgresql-plperl-8.4.20-1.el6_5.i686.rpm 4f1b2c436b1783ffc04194097521902943b28e29c4518c37cf28d348680b428b postgresql-plpython-8.4.20-1.el6_5.i686.rpm 450303af11c1f25ccb7873e2c431fe7033d442df188caadad3652956459bd18e postgresql-pltcl-8.4.20-1.el6_5.i686.rpm c23bfc4907c496aeeff2b82e3a30aeb19112f0a5210da8048881b080e69affd4 postgresql-server-8.4.20-1.el6_5.i686.rpm 034f5304a05d4670277f9da4a96f9199fcf69ed4dcbc936bc36df16cddc5d2bd postgresql-test-8.4.20-1.el6_5.i686.rpm x86_64: 6ca3a1beea5f113655e4abdf43ba3447ae836639bff9381e372bc6cc9d2172ab postgresql-8.4.20-1.el6_5.i686.rpm 2a284b22b8afafd7a6f16f7db7c67f7b17f9e7be50ac37c43f2b59227c5f4d97 postgresql-8.4.20-1.el6_5.x86_64.rpm 21fe297d24de7e93dd6ae0950749a50618c3fbb704fd2ad1c8dcaf45f6d9d92c postgresql-contrib-8.4.20-1.el6_5.x86_64.rpm 15439f46f6990322e5db410da13c921d0197431d5d649e89b2e0a18c592ebfe2 postgresql-devel-8.4.20-1.el6_5.i686.rpm c0da427fb8219741103ad2fe919aea9d060d2da03385771017b8d5e5d0cc4e2b postgresql-devel-8.4.20-1.el6_5.x86_64.rpm 2d9d306319d7ee86a526f91d00bee3455c5a8c8c49e2343b32d737600e18342e postgresql-docs-8.4.20-1.el6_5.x86_64.rpm beb186643ae59aa2f17081ea31223ae45a337bc2904f44eac315792a68bc7934 postgresql-libs-8.4.20-1.el6_5.i686.rpm e2203720a040325d3c183824d8df3f5b9d880a99a4809ee63e2b20de12d78e11 postgresql-libs-8.4.20-1.el6_5.x86_64.rpm 98fe31dee60e993e8c9df5c1c80ca810f6aec0526e47276e7b322bf4c79e89f3 postgresql-plperl-8.4.20-1.el6_5.x86_64.rpm 844dc266ab14390fef30daff86726bda3787899ca5c5cb870c12d12065fa5f3d postgresql-plpython-8.4.20-1.el6_5.x86_64.rpm 554b63e19495731fe21542e792cbeed39b76662615a6642cb080577a7388d7e8 postgresql-pltcl-8.4.20-1.el6_5.x86_64.rpm 2882d480ac89a6baf8bbdf366a31546096a00281a5a64f4cc6c0af8309ca3190 postgresql-server-8.4.20-1.el6_5.x86_64.rpm 3859e3665b6bd487f3399f77e787dd5da1cab563fbd207e9c8a6f5857fddca4b postgresql-test-8.4.20-1.el6_5.x86_64.rpm Source: e4d547ceb2c6dbc5a8586ac598f5d4b51208fa6d892738764932acf613d15bc5 postgresql-8.4.20-1.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 108, Issue 14 ************************************************

1 0

system hangs
by m.roth＠5-cent.us 26 Feb '14

26 Feb '14

Every so often, one of our servers will go into what I can only describe as an undefined state: it pings, but there's zero access - you can't ssh in, and if I go plug a keyboard and monitor into the server itself, you can see the monitor's live, it's not the "monitor turned off" color, but there is zero response to the keyboard. The upshot is that I wind up having to power cycle it. Well, it just happened again on one of our servers Friday evening, as I found this morning. Looking at the logs this morning, I see that sar last shows 10:20:01 PM all 34.38 0.00 8.29 0.00 0.00 57.33 On of my users dropped me an email at 22:45 that it was "off", and the last things I see in /var/log/messages are one of those annoying Feb 21 22:26:23 <server> kernel: INFO: task perl:20596 blocked for more than 120 seconds. Feb 21 22:26:23 <server> kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. I also see Feb 21 22:26:23 <server> kernel: perl D ffffffff80158250 0 20596 20557 which, as I just found by googling perl NOTLD, means that this is in a kernel uninterruptable state In addition, in the stack trace, some nfs messages Feb 21 22:26:23 <server> kernel: [<ffffffff886b58d1>] :nfs:nfs_wait_bit_uninterruptible+0x0/0xd So, it *appears* to be either an NFS issue, or a NIC issue. The user's home directory server is CentOS running 6.5, and the server that hung is 5.10. Mount on the formerly hung server, su-d to his account shows merely nfs, so I'm guessing it's NFS3. Looking at lsmod and /var/log/dmesg, I see it's running the tg3 NIC driver. Anyone else seeing this, and if so, any thoughts on the matter? Note that I've had this on Penguins, which are all Supermicro, and they're using the igb NIC driver, but the one this past weekend is a Dell, so it's not just one system. mark

4 4

Cannot install rhev-agentd on CentoOS CentOS release 6.5 (Final)
by iida 26 Feb '14

26 Feb '14

Hi All, I am trying to install rhev-agentd but i cannot able to install it. I havefollowed this documentation:http://wiki.centos.org/HowTos/oVirt I'm Trying Command: wget -q http://dev.centos.org/centos/6/ovirt/ovirt.repo File Not Found. Please guide me!

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss February 2014