Discuss December 2015

discuss@lists.centos.org

131 participants
134 discussions

New monitor weirdnesses (CentOS 5.11)
by Robert Heller 01 Dec '15

01 Dec '15

I just got a new monitor for my desktop system (the old one died after *many* years of service). The new monitor is a high res 16:9 monitor, but the VESA video driver insists on using 1024x768 (which was the resolution of the *old* monitor). It does seem to detect higher, 16:9 resolutions but it is not using them. I *think* I need to set some low-level video mode thing, but it has been a long time since I have had to do that that I have totally forgotten how to do it. And I have been unable to find it with a websearch either. >From /var/log/Xorg.0.log: (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) VESA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) VESA(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) VESA(0): Searching for matching VESA mode(s): Any of 1360x768, 1366x768, or 1280x720 would be fine. Following this are a pile of blocks starting with 'Mode: ...' or '*Mode: ...'. I think these are the modes the driver is reading from some 'magic' place and maybe the stared ones are 'matches' to the DCC mode lines. I think what I need to do is update this 'magic' place with a low-level program (probably eventually run in /etc/rc.local or someplace like that) that will add in a 'Mode' -- I did this *years* ago with little machines with Intel video chips and 16:9 monitors. But I am totally blanking on the command to use. I find using a 4:3 video mode on a 16:9 monitor somewhat unusable. I running CentOS 5.11 w/Xen. The video chipset is a NVIDIA Corporation C77 [GeForce 8200] (rev a2). I am using stock CentOS 5 drivers and libraries (slightly out of date). -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

5 4

Re: [CentOS] how do I download pictures from a dumb phone?
by Mike - st257 01 Dec '15

01 Dec '15

On Fri, Nov 27, 2015 at 10:26 PM, John R Pierce <pierce(a)hogranch.com> wrote: > >> dumb phone services have no email at all unless you pay Verizon or > whomever $$ per email message sent. > > Create a picture message and instead of putting in a cell phone number, put in an email address. Same goes for text messages. I've used BitPim in the past with some success. I don't believe I've ever used BitPim on CentOS though. For a few pictures, simply send picture messages to your email address. -- ---~~.~~--- Mike // SilverTip257 //

1 0

Idiot-proof method to format a flash drive
by Frank Cox 01 Dec '15

01 Dec '15

Whenever I format a flash drive I'm always terrified that I'm going to fat-finger something in the terminal and accidentally blow away a partition on one of my hard drives. *shudder* Is gparted the best gui to handle this task? Or is there something better? I'd really prefer something more limited that just allows me to select whatever it sees as a removable drive and disallows any screwin' about with the other drives. "Format the USB connected drive?". "Choose format (ext4, ext3, fat32)". "Blammo." -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

4 4

CentOS 7 and ips.ko
by gigzbyte 01 Dec '15

01 Dec '15

Hi all! I have the old IBM E-Server 346 with IBM ServeRAID 7-k controller. It works with CentOS 6 ips.ko module, but when i try to install fresh CentOS 7.1 - i can't find this module on the install cd and raid controller didn't recognised. How can i get it working? Thank you! ______________ With regards, Dmitry L --- Это сообщение проверено на вирусы антивирусом Avast. https://www.avast.com/antivirus

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2015