Discuss December 2016

discuss@lists.centos.org

115 participants
118 discussions

Re: [CentOS] CentOS 6, firefox, PIV cards
by Denniston, Todd A CIV NAVSURFWARCENDIV Crane, JXVS 07 Dec '16

07 Dec '16

m.roth at 5-cent.us further wrote: ############## m.roth at 5-cent.us wrote: > Hi, folks, > > Up until a few weeks ago, it worked as it has been for years: firefox, > security device is libcoolkey, and pcscd. > > Today, I go to use it (I have done updates sine I last used it), and > try preferences->advanced->certificates, and it hangs. My most recent > try was for over 20 min. If you move something over the window, then > move it away, it's a blank window. Pull out the card, and *some* of the > time, it pops up the window showing no certs, having never asked for a > PIN. The rest of the time, firefox crashes, hard. > > I know the pcscd part works - I used it via a script this morning from > the command line, as does pkcs15-tool from the command line. > > Anyone got any clues? Maybe I should downgrade (if I can) firefox? > Additional info: I tried bringing up firefox with two other profiles. One didn't have coolkey as a security device, but when I tried to add it, it responded with "cannot add module". Yet a third profile, that had both libcoolky and the older onepin, and that popped up a window saying I needed to authenticate, sat there with no way to put a pin in, then, when I pulled the card, it flashed the popup window with my certs. Yes, at this time, I'm looking at issues with firefox. So - has anyone else had this problem? mark ################# Not yet had the issue(s) but I do have some questions: 1) is this with the same physical PIV that you have been using "Up until a few weeks ago", that is did you (or the affected person) get a new PIV recently? 1a) does firefox have the certificate authorities loaded which cover the card in question (make sure to trace back to the root CA, there have been changes)? 2) have you tried just `yum downgrade firefox` and see if it works? 2a) I would be tempted to do something on the order of `rpm -qa --last |head -50` and then for each package seen there do an rpm -q --verify (syntax unsure) on them to be sure all the packages got installed correctly. 3) same as (2) but with recent nss|coolkey|pcscd updates? 4) interrupted updates? i.e., `yum complete-transaction` (sp???) `yum reinstall firefox nss coolkey pcscd` Even when this disclaimer is not here: I am not a contracting officer. I do not have authority to make or modify the terms of any contract.

2 1

ASL enters EPEL7: Hardware accelerated multiphysics simulation platform
by Zeev Pekar 07 Dec '16

07 Dec '16

Dear CentOS community, Due to efforts of Fedora maintainers ASL ( http://asl.org.il/ ) entered EPEL7 ( libASL ) today and now can be easily installed and deployed: https://admin.fedoraproject.org/pkgdb/package/rpms/libASL/ All the best, Zeev About ASL --------- Advanced Simulation Library (ASL) is a free and open source hardware accelerated multiphysics simulation platform (and an extensible general purpose tool for solving Partial Differential Equations). Its computational engine is written in OpenCL and utilizes matrix-free solution techniques which enable extraordinarily high performance, memory efficiency and deployability on a variety of massively parallel architectures, ranging from inexpensive FPGAs, DSPs and GPUs up to heterogeneous clusters and supercomputers. The engine is hidden entirely behind simple C++ classes, so that no OpenCL knowledge is required from application programmers. Mesh-free, immersed boundary approach allows one to move from CAD directly to simulation drastically reducing pre-processing efforts and amount of potential errors. ASL can be used to model various coupled physical and chemical phenomena and employed in a multitude of fields: computational fluid dynamics, virtual sensing, industrial process data validation and reconciliation, image-guided surgery, computer-aided engineering, design space exploration, crystallography, etc..

1 0

Kernel Panic at Boot
by Ken Smith 07 Dec '16

07 Dec '16

Hi All, This is a Centos 6.4 system used as a home server and Myth backend machine. It has just suffered a motherboard failure and I have got a identical replacement. This machine normally runs in run level 3. It has a NVidia graphics card and the NVidia driver installed but I found it crashed the machine as soon as I started X on there. So I never bothered with X and left it in RL3. So as part of the re-commissioning of this machine I decided to remove the NVidia driver and go back to Nouveau. I shouldn't have bothered. Even starting in RL1 it kernel panics at bootup toward the end of the boot process. If I boot it in level 3 all the daemons start and it runs a little bit of script I have in rc.local to enable ACL's and then panics. The panic is something like panic occurred, switching back to text console. general protection fault: 0000 [#2] SMP last sysfs file: /sys/devices/virtual/block/dm-5/dm/name CPU 1 Modules linked in: "........list of modules......." Pid: 147, comm: plymouthd Tainted: G D ------------------- 2.6.32-358.6.2.el6.x86_64 #1 Gigabyte Technology Co., Ltd P43-ES3G/P43-ES3G There's a list of CPU registers and a call trace after that. I have a photo of the screen if that information is useful Any idea how I can trace this. Many thanks Ken -- Ken Smith K-Net Technology 020 8651 5722

3 3

CentOS-announce Digest, Vol 142, Issue 3
by centos-announce-request＠centos.org 07 Dec '16

07 Dec '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:2850 Important CentOS 5 thunderbird Security Update (Johnny Hughes) 2. CESA-2016:2850 Important CentOS 6 thunderbird Security Update (Johnny Hughes) 3. CESA-2016:2872 Moderate CentOS 6 sudo Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 6 Dec 2016 20:06:31 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:2850 Important CentOS 5 thunderbird Security Update Message-ID: <20161206200631.GA15944(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:2850 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-2850.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9e7bc8f128afaee0e7fa2157fb5528b7c231dbee4b4ba9d8c1fe36dba770ba00 thunderbird-45.5.1-1.el5.centos.i386.rpm x86_64: a7ed51f2b8ced4ca7d305c39fadcd4b0ecbb5c3807fe598657a2d28f2a19833c thunderbird-45.5.1-1.el5.centos.x86_64.rpm Source: 81ff9f9d269e755f2b2752c77c250fed6664c31f90ef6d484c10f27dbf5b24a1 thunderbird-45.5.1-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 2 Date: Wed, 7 Dec 2016 03:42:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:2850 Important CentOS 6 thunderbird Security Update Message-ID: <20161207034229.GA57092(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:2850 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-2850.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 37159bf7a1c76a81bc07cadec1539bdb583e1a88c6c986045a3e03004da2171e thunderbird-45.5.1-1.el6.centos.i686.rpm x86_64: f8bf63fcd830956dda9c173b6d1a7c75a236ef62260c526c8011077e8ebc3860 thunderbird-45.5.1-1.el6.centos.x86_64.rpm Source: 003db7819ee770c3a01940de0e0656a23fb0d2d992266ad1d9cb66bcadcbbb8c thunderbird-45.5.1-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Wed, 7 Dec 2016 03:43:16 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:2872 Moderate CentOS 6 sudo Security Update Message-ID: <20161207034316.GA57313(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:2872 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-2872.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f2508e248146b5636959f838ece913d47c6fda102a3bcfc8fee0fda0f023f9c4 sudo-1.8.6p3-25.el6_8.i686.rpm 77251c20200c09360d84a0dfb896cd6ed7dbadb3145f4b55f3ad3d654affa852 sudo-devel-1.8.6p3-25.el6_8.i686.rpm x86_64: 4685543cf04bdd940e99b497e857c9d5f83b05ee8f48a3dc390a4e6501ec69c4 sudo-1.8.6p3-25.el6_8.x86_64.rpm 77251c20200c09360d84a0dfb896cd6ed7dbadb3145f4b55f3ad3d654affa852 sudo-devel-1.8.6p3-25.el6_8.i686.rpm ad5c08ce5caca91957edf192e14dc8596c8328e64161cef8453bc3359c5df90c sudo-devel-1.8.6p3-25.el6_8.x86_64.rpm Source: 87812a80c64fc266b0ca7b2808a59890ed7850aef96c759497d646268584856f sudo-1.8.6p3-25.el6_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 142, Issue 3 ***********************************************

1 0

centos 7 and qemu-system-arm for PI3
by Jerry Geis 06 Dec '16

06 Dec '16

I downloaded the file CentOS-Userland-7-armv7hl-Minimal-1603-RaspberryPi3.img I have qemu-system-arm installed on CentOS 7.2 I am trying to get this to run on my machine. I get this when I run: ./boot_arm_img.sh ../Downloads/CentOS-Userland-7-armv7hl-Minimal-1603-RaspberryPi3.img [root@devgeis development.systems]# No machine specified, and there is no default. Use -machine help to list supported machines! What "-machine XXXXX" value would I use for PI3? doing the -machine help gives a LONG list and I am not sure which machine to specify. This is the 32 bit image. I'd like to find a 64 bit image and use that also. Anyone doing this? Thanks, Jerry

1 0

SCL devtoolset-3 or 4 without eclipse?
by Robert Arkiletian 05 Dec '16

05 Dec '16

Is there a way to install devtoolset packages without the bloat of eclipse? I just want the new compiler and toolchain, not a big IDE. BTW devtoolset-3 dependencies are broken in yum with C6 yum install devtoolset-3 ... ---> Package devtoolset-3-perftools.x86_64 0:3.1-12.el6 will be installed --> Processing Dependency: devtoolset-3-dyninst for package: devtoolset-3-perftools-3.1-12.el6.x86_64 --> Finished Dependency Resolution Error: Package: 1:devtoolset-3-eclipse-platform-4.4.2-4.bootstrap2.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-eclipse-emf-core >= 1:2.10.2-2 Error: Package: devtoolset-3-ide-3.1-12.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-eclipse-emf Error: Package: devtoolset-3-ide-3.1-12.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-eclipse-emf-sdk Error: Package: devtoolset-3-perftools-3.1-12.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-dyninst Error: Package: devtoolset-3-ide-3.1-12.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-eclipse-emf-examples Error: Package: 1:devtoolset-3-eclipse-platform-4.4.2-4.bootstrap2.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-eclipse-ecf-core >= 3.9.1-2.5 Error: Package: devtoolset-3-ide-3.1-12.el6.x86_64 (centos-sclo-rh) Requires: devtoolset-3-eclipse-emf-core Error: Package: devtoolset-3-eclipse-mylyn-builds-3.14.2-1.bootstrap1.el6.noarch (centos-sclo-rh) Requires: devtoolset-3-eclipse-emf You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest

3 3

CentOS ISO Build process
by Olivier BONHOMME 05 Dec '16

05 Dec '16

Hello the list, For a personal use, I would be intersted in creating my own custom CentOS ISO. For that, I would love to use the build process used for the the official ISOs generation. Is the documentation about this release process and the relative tools and configuration files are available and public for CentOS 7 ? If yes, where is it possible to find them ? I found data on seven.centos.org and livecd-tools but I'm not sure if it is the real used process. Thanks for your answers Regards, Olivier Bonhomme

2 1

Huge write amplification with thin provisioned logical volumes
by Radu Radutiu 05 Dec '16

05 Dec '16

Hi, I've noticed huge write amplification problem with thinly provisioned logical volumes and I wondered if anyone can explain why it happens and if and how can be fixed. The behavior is the same on Centos 6.8 and Centos 7.2. I have a NVME card (Intel DC P3600 -2 TB) on which I create a thinly provisioned logical volume: pvcreate /dev/nvme0n1 vgcreate vgg /dev/nvme0n1 lvcreate -l100%FREE -T vgg/thinpool lvcreate -V40000M -T vgg/thinpool -n brick1 mkfs.xfs /dev/vgg/brick1 If I run a write test ( dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync ) I see in iotop that the actual disk write is 30 times the amount of data that I'm actually writing to disk). Total DISK READ: 0.00 B/s | Total DISK WRITE: 1001.23 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 10:59:53 34453 be/4 root 0.00 B/s 30.34 M/s 0.00 % 12.10 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync Total DISK READ: 0.00 B/s | Total DISK WRITE: 991.92 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 10:59:54 34453 be/4 root 0.00 B/s 30.05 M/s 0.00 % 12.63 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync Total DISK READ: 0.00 B/s | Total DISK WRITE: 1024.52 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 10:59:55 34453 be/4 root 0.00 B/s 31.05 M/s 0.00 % 12.49 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync 10:59:55 1057 be/3 root 0.00 B/s 15.39 K/s 0.00 % 0.01 % [jbd2/sda1-8] Total DISK READ: 0.00 B/s | Total DISK WRITE: 967.60 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 10:59:56 34453 be/4 root 0.00 B/s 29.32 M/s 0.00 % 12.75 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync Total DISK READ: 0.00 B/s | Total DISK WRITE: 943.66 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 10:59:58 34453 be/4 root 0.00 B/s 28.60 M/s 0.00 % 11.79 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync 10:59:58 34448 be/4 root 0.00 B/s 3.84 K/s 0.00 % 0.00 % python /usr/sbin/iotop -o -b -t Total DISK READ: 0.00 B/s | Total DISK WRITE: 959.40 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 10:59:59 34453 be/4 root 0.00 B/s 29.07 M/s 0.00 % 11.81 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync Total DISK READ: 0.00 B/s | Total DISK WRITE: 948.38 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 11:00:00 34453 be/4 root 0.00 B/s 28.73 M/s 0.00 % 11.57 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync For a 30MB/s write at the application level I get around 1000MB/s write at the device level, i.e. a 33x amplification. On Centos 6 if I try to align the data using the values from https://gluster.readthedocs.io/en/latest/Administrator%20Guide/Setting%20Up… I get only a 7x amplification. On Cetos 7 I can see the same 7x amplification using the default lvcreate options. This is the Centos 7 iotop output: 12:48:29 Total DISK READ : 0.00 B/s | Total DISK WRITE : 32.24 M/s 12:48:29 Actual DISK READ: 0.00 B/s | Actual DISK WRITE: 226.63 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 12:48:29 15234 be/3 root 0.00 B/s 3.80 K/s 0.00 % 35.20 % [jbd2/dm-8-8] 12:48:29 15258 be/4 root 0.00 B/s 32.24 M/s 0.00 % 10.64 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync 12:48:29 14870 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.05 % [kworker/u80:1] 12:48:29 15240 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.03 % [kworker/u80:2] 12:48:29 15255 be/4 root 0.00 B/s 3.80 K/s 0.00 % 0.00 % python /usr/sbin/iotop -o -b -t 12:48:30 Total DISK READ : 0.00 B/s | Total DISK WRITE : 31.97 M/s 12:48:30 Actual DISK READ: 0.00 B/s | Actual DISK WRITE: 224.85 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 12:48:30 15234 be/3 root 0.00 B/s 0.00 B/s 0.00 % 35.14 % [jbd2/dm-8-8] 12:48:30 15258 be/4 root 0.00 B/s 31.97 M/s 0.00 % 10.61 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync 12:48:30 14870 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.05 % [kworker/u80:1] 12:48:30 15240 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.03 % [kworker/u80:2] 12:48:31 Total DISK READ : 0.00 B/s | Total DISK WRITE : 32.50 M/s 12:48:31 Actual DISK READ: 0.00 B/s | Actual DISK WRITE: 228.94 M/s TIME TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 12:48:31 15234 be/3 root 0.00 B/s 0.00 B/s 0.00 % 35.28 % [jbd2/dm-8-8] 12:48:31 15258 be/4 root 0.00 B/s 32.48 M/s 0.00 % 10.72 % dd if=/dev/zero of=./zero.img bs=4k count=100000 oflag=dsync Still 7x write amplifications seems too much. Has anyone seen this or has any explanation for it? I am rewriting the same file with dd multiple times so the filesystem and thin lvm should use already provisioned space. Best regards, Radu

1 0

CentOS6: devhelp search misses most of GTK+ 2 API functions
by wwp 05 Dec '16

05 Dec '16

Hello there, a long-standing issue I have here and that I'm decided to get rid of now: in the devhelp, most of the GTK+ functions are not found by the search tab: it will find gtk_icon fonctions but no gtk_widget or gtk_color_button, gtk_label etc. Also, it will find GtkVbox item but no gtk_vbox_new, GtkWidget but no gtk_widget function, for instance. The docs are there (gtk-doc, gtk2-devel-docs), since I can find all those API elements by browsing the GTK+ 2 Reference Manual from the Contents tab. Is this really how it should be? Regards, -- wwp

1 0

CentOS-announce Digest, Vol 142, Issue 2
by centos-announce-request＠centos.org 04 Dec '16

04 Dec '16

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2016:2843 Critical CentOS 5 firefox Security Update (Johnny Hughes) 2. CESA-2016:2843 Critical CentOS 6 firefox Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 3 Dec 2016 11:57:24 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:2843 Critical CentOS 5 firefox Security Update Message-ID: <20161203115724.GA15523(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:2843 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-2843.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 428cdbe6535695b8770f32372f3d88f886beabec9ada487d0aca157816c5973e firefox-45.5.1-1.el5.centos.i386.rpm x86_64: 428cdbe6535695b8770f32372f3d88f886beabec9ada487d0aca157816c5973e firefox-45.5.1-1.el5.centos.i386.rpm c0eddc4d631809868c0409114c051170671a357eaa95a3b29a8642f8c65e5d42 firefox-45.5.1-1.el5.centos.x86_64.rpm Source: 48ab00902da28957f5bb2ed54e684596d52c8fca825fbb24c19814786643fad4 firefox-45.5.1-1.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: JohnnyCentOS ------------------------------ Message: 2 Date: Sat, 3 Dec 2016 11:58:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2016:2843 Critical CentOS 6 firefox Security Update Message-ID: <20161203115817.GA57270(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2016:2843 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2016-2843.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4272182e4744591510d2a8f695c4514ba5cd48ea53d1f4b730fea917ced95046 firefox-45.5.1-1.el6.centos.i686.rpm x86_64: 4272182e4744591510d2a8f695c4514ba5cd48ea53d1f4b730fea917ced95046 firefox-45.5.1-1.el6.centos.i686.rpm ec698684b1a62b6e27173e7a025cb354ab2f0f7a2f5ff19d76e0f410b4e18575 firefox-45.5.1-1.el6.centos.x86_64.rpm Source: d174016bedb5dc9b22630ceb8f15eb3ba11c2114baf4a5ba87bdf9fd9a4dd53c firefox-45.5.1-1.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 142, Issue 2 ***********************************************

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss December 2016