Discuss August 2018

discuss@lists.centos.org

80 participants
77 discussions

Screensavers on Centos-7
by Fred Smith 02 Aug '18

02 Aug '18

Hi all! I keep having problems with screensaver(s) on Centos-7. I have in the past liked Xscreensaver, so I've installed it and tried to suppress whatever other screensaver is on the system. Xscreensaver works fine for a day or 20 then quits working. After a lengthy battle I gave up and removed it. I'm now trying mate-screensaver, which does the same thing! when I say "quits working" I mean just that. one night it goes to a black screen (as configured) then a minute or two later the power manager shuts off the screen. The next night it does neither, and forever after. Sometimes after a reboot it'll work again for a while then it starts misbehaving again. First question: Anybody have any similar issues? Anybody have any ideas on what's going on here and what I can do about it? So, not being in a position to reboot, last night I killed mate-screensaver and mate-powermanager, with the hopes the daemons would restart themselves. No such luck. so I tried to figure out what programs I could run to get them started again. So far I'm too stupid to be able to figure that out, as well. Second question: Anybody able to clue me in on how the screensavers and power managers are managed/started? there isn't a systemctl module for it, as far as I can see. if I run mate-screensaver from the commandline (as me, not root) I get no prompt back, so I assume it's running silently, but it also doesn't blank the screen at the specified time. So, thanks in advance for any assistance! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "Not everyone who says to me, 'Lord, Lord,' will enter the kingdom of heaven, but only he who does the will of my Father who is in heaven." ------------------------------ Matthew 7:21 (niv) -----------------------------

1 0

C7 Xfce group
by Robert Moskowitz 02 Aug '18

02 Aug '18

I am working with Centos-arm which right now only has the gnome and kde desktops. I am spoiled with using Xfce on all my Fedora systems (MUCH longer battery life on my notebook, for example). I like its simplicity. I see from messages here that mainline C7 does have the Xfce desktop. Can someone give me a list of rpms that make up the group, so I can try starting with the minimal image and see if I can build an Xfce desktop? Meanwhile I am going to put in a request for Xfce on the centos-arm list. thanks

2 3

Finding user's files
by mark 02 Aug '18

02 Aug '18

This is among the things we need to do when a user leaves, and it's a larger question than it sounds. Our Office has many servers, with a good number of fileservers for projects, with large filesystems (i.e. 10's of TB). Can anyone think of a way *other* than running what's probably a many-hour long find / -user on all our systems, which is really intensive, to find all the files own by a given user? Locate would be great, but from the man pages and what I can find online, it only stores filenames and paths. mark

4 4

Strange vncserver behavior
by Robert Moskowitz 01 Aug '18

01 Aug '18

I got vncserver working per: https://www.tecmint.com/install-and-configure-vnc-server-in-centos-7/ Then I went to set up a second instance, and have that for logging on to root: ========== cp /lib/systemd/system/vncserver@.service /etc/systemd/system/vncserver@:2.service vi /etc/systemd/system/vncserver@\:2.service replace <USER> with root systemctl daemon-reload systemctl start vncserver@:2 ========== I got the message: Job for vncserver@:2.service failed because a configured resource limit was exceeded. See "systemctl status vncserver@:2.service" and "journalctl -xe" for details. #systemctl -l status vncserver@:2.service ● vncserver@:2.service - Remote desktop service (VNC) Loaded: loaded (/etc/systemd/system/vncserver@:2.service; disabled; vendor preset: disabled) Active: failed (Result: resources) since Wed 2018-08-01 08:45:19 EDT; 1min 8s ago Process: 2267 ExecStart=/usr/sbin/runuser -l root -c /usr/bin/vncserver %i (code=exited, status=0/SUCCESS) Process: 2260 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill %i > /dev/null 2>&1 || : (code=exited, status=0/SUCCESS) Aug 01 08:45:14 localhost systemd[1]: Starting Remote desktop service (VNC)... Aug 01 08:45:19 localhost systemd[1]: PID file /home/root/.vnc/localhost:2.pid not readable (yet?) after start. Aug 01 08:45:19 localhost systemd[1]: Failed to start Remote desktop service (VNC). Aug 01 08:45:19 localhost systemd[1]: Unit vncserver@:2.service entered failed state. Aug 01 08:45:19 localhost systemd[1]: vncserver@:2.service failed. =========== And yet, I am able to connect to 5902! It is running. cat /root/.vnc/localhost:2.log shows: Xvnc TigerVNC 1.8.0 - built Apr 11 2018 21:04:25 Copyright (C) 1999-2017 TigerVNC Team and many others (see README.txt) See http://www.tigervnc.org for information on TigerVNC. Underlying X server release 11903000, The X.Org Foundation Wed Aug 1 08:45:16 2018 vncext: VNC extension running! vncext: Listening for VNC connections on all interface(s), port 5902 vncext: created VNC server for screen 0 Wed Aug 1 08:45:23 2018 ComparingUpdateTracker: 0 pixels in / 0 pixels out ComparingUpdateTracker: (1:nan ratio) Wed Aug 1 08:51:01 2018 Connections: accepted: 192.168.160.20::53318 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type VeNCrypt(19) SVeNCrypt: Client requests security type TLSVnc (258) etc. ======== what is going on with systemctl? thanks

1 0

how to update python 2.7.5 to python 2.7.15 on centos 7.4
by qw 01 Aug '18

01 Aug '18

Hi, I have one question about python update. How to update python 2.7.5 to python 2.7.15 on centos 7.4? Thanks! Regards Andrew

2 1

CVE-2018-0495 Libgcrypt Vulnerability Fix for CentOS 6?
by nschehovin＠yahoo.com 01 Aug '18

01 Aug '18

Is there a schedule for fixing CVE-2018-0495 Libgcrypt Vulnerability for CentOS 6? I can not find a patch for this CVE. Please point me in the right direction if I am missing something. Thanks, Ed

2 1

Re: [CentOS] (EXT) CentOS Digest, Vol 162, Issue 29
by Selvam, Joshua 01 Aug '18

01 Aug '18

Send CentOS mailing list submissions to centos(a)centos.org -----Original Message----- From: CentOS <centos-bounces(a)centos.org> On Behalf Of centos-request(a)centos.org Sent: Tuesday, July 31, 2018 5:30 PM To: centos(a)centos.org Subject: (EXT) CentOS Digest, Vol 162, Issue 29 Send CentOS mailing list submissions to centos(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos or, via email, send a message with subject or body 'help' to centos-request(a)centos.org You can reach the person managing the list at centos-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS digest..." Today's Topics: 1. Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Yannis Milios) 2. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Simon Matter) 3. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Yannis Milios) 4. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (mark) 5. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Yannis Milios) 6. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (mark) 7. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Yannis Milios) 8. Re: Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Simon Matter) 9. Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] (Yannis Milios) 10. Increase Disk Space with LVM (Felix K?lzow) ---------------------------------------------------------------------- Message: 1 Date: Mon, 30 Jul 2018 16:26:43 +0100 From: Yannis Milios <yannis.milios(a)gmail.com> To: centos(a)centos.org Subject: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <CAFiF2OpdpWuVLyZq7_4n1MxtMr2ypJkgKhLt+03ayapexgNuqA(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hello, I'm having a strange problem booting a new centos7 installation. Below some background on this. [I have attached the tech details at the bottom of this message] I started a new CentOS7 installation on a VM, so far all good, o/s boots fine. Then I decided to increase VM disk size (initially was 10G) to 13G. Powered off the VM, increased the vhd via the hypervisor, booted from CentOS livecd, selected "recover my centos installation". Then I used the following sequence of commands to make the new vhd size "visible" to the o/s ... - ran fdisk /dev/sda and deleted partition 2. (This is the LVM partition where the o/s is stored. The first partition is /boot [xfs] partition *non lvm*.) - created a new partition with same starting sector as before deleting it, but a different ending sector (to reflect to the increased space). - set partition type to 8e (lvm), saved settings and exit. - ran pvresize and lvresize to make new space visible to the o/s.All good, I can see the space increase on 'lvdisplay centos/root'. - ran 'mount /dev/mapper/centos-root /mnt/root' to temporarily mount the o/s partition. - ran 'xfs_growfs /mnt/root' to resize the o/s fs to the new size. It was successful and I could actually chroot to the o/s and verify new disk size. - rebooted and tried to boot from hdd this time. Grub menu shows up and loads default kernel (3.10.0-862.9.1.el7.x86_64). - after initial kernel boot up process, booting continues to initrd and then it's where the problem starts... - looks like dracut has issues locating/enabling /dev/mapper/centos-root (lv) and as a result it cannot boot to the 'real' root fs (/). - while in dracut shell, I execute the following command sequence: 1. lvm lvchange -ay /dev/centos/root 2. lvm lvchange -ay /dev/centos/swap 3. ln -s /dev/mapper/centos-root /dev/root 4. exit ...and the o/s boots fine...so looks like the pv,vg,lv is detected properly while in initrd, but somehow dracut has difficulties enabling the root,swap LVs ? - While in o/s, I rebuild initrd by using: 'dracut -f -v -a lvm' Note, I have to use '-a lvm' as for some reason, if don't, the lvm utils (lvm,lvm_scan) are not being included to the initrd, not sure why this happens. After rebooting, same thing happens, I have to manually boot the system via dracut shell. I'm a bit stuck at this point, any clues what I'm doing wrong in here ? As I previously said, this is a new installation, so I could simply reinstall the whole thing, but I would rather try to find out some answer to why is this happening ... :-) [curiosity] Some additional details: ================== I've attached /run/initramfs/rdsosreport.txt file [generated while in inird] here: https://privatebin.net/?fdc4052c0c402884#gdB/QYR3IeR55SxUbjfrkZPQfJ7jMxiUxq… o/s ver=CentOS Linux release 7.5.1804 (Core) [root@localhost ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 13G 0 disk ??sda1 8:1 0 500M 0 part /boot ??sda2 8:2 0 12.5G 0 part ??centos-root 253:0 0 11.5G 0 lvm / ??centos-swap 253:1 0 1G 0 lvm [SWAP] [root@localhost ~]# cat /etc/default/grub GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rd.shell rhgb" GRUB_DISABLE_RECOVERY="true" ------------------------------ Message: 2 Date: Mon, 30 Jul 2018 17:53:56 +0200 From: "Simon Matter" <simon.matter(a)invoca.ch> To: "CentOS mailing list" <centos(a)centos.org> Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <09679ddf131cfabaaa9a38ee3a874541.squirrel(a)webmail.bi.invoca.ch> Content-Type: text/plain;charset=utf-8 Hi, > Hello, > > I'm having a strange problem booting a new centos7 installation. Below > some background on this. [I have attached the tech details at the > bottom of this message] > > I started a new CentOS7 installation on a VM, so far all good, o/s > boots fine. Then I decided to increase VM disk size (initially was 10G) to 13G. > Powered off the VM, increased the vhd via the hypervisor, booted from > CentOS livecd, selected "recover my centos installation". Then I used > the following sequence of commands to make the new vhd size "visible" > to the o/s ... > > - ran fdisk /dev/sda and deleted partition 2. (This is the LVM > partition where the o/s is stored. The first partition is /boot [xfs] > partition *non > lvm*.) > - created a new partition with same starting sector as before deleting > it, but a different ending sector (to reflect to the increased space). > - set partition type to 8e (lvm), saved settings and exit. At this point I usually reboot and do the following steps while the system is running. I don't say how you do it is wrong, it's just easier/faster to do things while the system is online if downtime matters. I don't really know what causes your issues. The reason may be that I have more and more problems understanding the whole boot process and all the variants we used to have over more than two decades... But, what happens if you let the kernel post install scripts do the work or setting up the initrd things? If you reinstall the latest kernel, does it change anything? Regards, Simon > - ran pvresize and lvresize to make new space visible to the o/s.All > good, I can see the space increase on 'lvdisplay centos/root'. > - ran 'mount /dev/mapper/centos-root /mnt/root' to temporarily mount > the o/s partition. > - ran 'xfs_growfs /mnt/root' to resize the o/s fs to the new size. It > was successful and I could actually chroot to the o/s and verify new > disk size. > - rebooted and tried to boot from hdd this time. Grub menu shows up > and loads default kernel (3.10.0-862.9.1.el7.x86_64). > - after initial kernel boot up process, booting continues to initrd > and then it's where the problem starts... > - looks like dracut has issues locating/enabling > /dev/mapper/centos-root > (lv) and as a result it cannot boot to the 'real' root fs (/). > - while in dracut shell, I execute the following command sequence: > 1. lvm lvchange -ay /dev/centos/root > 2. lvm lvchange -ay /dev/centos/swap > 3. ln -s /dev/mapper/centos-root /dev/root > 4. exit > ...and the o/s boots fine...so looks like the pv,vg,lv is detected > properly while in initrd, but somehow dracut has difficulties enabling > the root,swap LVs ? > > - While in o/s, I rebuild initrd by using: 'dracut -f -v -a lvm' > Note, I have to use '-a lvm' as for some reason, if don't, the lvm > utils > (lvm,lvm_scan) are not being included to the initrd, not sure why this > happens. > After rebooting, same thing happens, I have to manually boot the > system via dracut shell. > > I'm a bit stuck at this point, any clues what I'm doing wrong in here ? > > As I previously said, this is a new installation, so I could simply > reinstall the whole thing, but I would rather try to find out some > answer to why is this happening ... :-) [curiosity] > > Some additional details: > ================== > I've attached /run/initramfs/rdsosreport.txt file [generated while in > inird] here: > https://privatebin.net/?fdc4052c0c402884#gdB/QYR3IeR55SxUbjfrkZPQfJ7jM > xiUxq5DWhTVbWc= > > o/s ver=CentOS Linux release 7.5.1804 (Core) > > [root@localhost ~]# lsblk > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:0 0 13G 0 disk > ??sda1 8:1 0 500M 0 part /boot > ??sda2 8:2 0 12.5G 0 part > ??centos-root 253:0 0 11.5G 0 lvm / > ??centos-swap 253:1 0 1G 0 lvm [SWAP] > > [root@localhost ~]# cat /etc/default/grub > GRUB_TIMEOUT=5 > GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" > GRUB_DEFAULT=saved > GRUB_DISABLE_SUBMENU=true > GRUB_TERMINAL_OUTPUT="console" > GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap > rd.shell rhgb" > GRUB_DISABLE_RECOVERY="true" > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos > ------------------------------ Message: 3 Date: Mon, 30 Jul 2018 17:32:53 +0100 From: Yannis Milios <yannis.milios(a)gmail.com> To: centos(a)centos.org Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <CAFiF2Or=a_2b+e+jj9AeUufnZg4N+rHvS8KJHF+LoBDJ+QcRNg(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" > > But, what happens if you let the kernel post install scripts do the > work or setting up the initrd things? Initially, I just rebooted from LiveCD and left Grub,kernel and dracut do their job with the defaults, but unfortunately, boot process stops at initrd (dracut) stage with the following error: [ 197.768159] localhost.localdomain dracut-initqueue[252]: Warning: Could > not boot. > [ 197.821409] localhost.localdomain systemd[1]: Received SIGRTMIN+20 > from PID 254 (plymouthd). > [ 197.822328] localhost.localdomain dracut-initqueue[252]: Warning: > /dev/centos/root does not exist > [ 197.823044] localhost.localdomain dracut-initqueue[252]: Warning: > /dev/centos/swap does not exist > [ 197.846807] localhost.localdomain systemd[1]: Starting Dracut > Emergency Shell... > [ 197.870983] localhost.localdomain systemd[1]: Received SIGRTMIN+21 > from PID 254 (plymouthd). Then, I'm dropped to dracut shell, where I boot the system by using the lvm commands as described to my first post. Once in O/S, I re-create initrd by using 'dracut -f -v -a lvm' command and reboot again the system. But still I get the same error during boot ... If you reinstall the latest kernel, does > it change anything? > This is actually the latest kernel (3.10.0-862.9.1.el7.x86_64) but I tried to boot with the second (older) kernel (vmlinuz-3.10.0-327.36.3.el7.x86_64), where I got exactly the same error during boot. Clearly, this is not a kernel issue, perhaps not even a dracut (initrd) issue, since everything was working fine, before resizing the PV/LV. I suspect that something went wrong during that step, but what? As I can successfully boot the system manually via dracut, normally everything should be ok? no? What can prevent dracut from activating the 2 LVs (centos/root and centos/swap) during initial boot phase ? Thanks, Yannis ------------------------------ Message: 4 Date: Mon, 30 Jul 2018 15:13:08 -0400 From: "mark" <m.roth(a)5-cent.us> To: "CentOS mailing list" <centos(a)centos.org> Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <e9796451bea645de4bc4fbe210591182.squirrel(a)host290.hostmonster.com> Content-Type: text/plain;charset=utf-8 Yannis Milios wrote: >> But, what happens if you let the kernel post install scripts do the >> work or setting up the initrd things? > > Initially, I just rebooted from LiveCD and left Grub,kernel and dracut > do their job with the defaults, but unfortunately, boot process stops > at initrd (dracut) stage with the following error: > > [ 197.768159] localhost.localdomain dracut-initqueue[252]: Warning: > Could > >> not boot. [ 197.821409] localhost.localdomain systemd[1]: Received >> SIGRTMIN+20 from >> PID 254 (plymouthd). >> [ 197.822328] localhost.localdomain dracut-initqueue[252]: Warning: >> /dev/centos/root does not exist >> [ 197.823044] localhost.localdomain dracut-initqueue[252]: Warning: >> /dev/centos/swap does not exist >> [ 197.846807] localhost.localdomain systemd[1]: Starting Dracut >> Emergency Shell... >> [ 197.870983] localhost.localdomain systemd[1]: Received SIGRTMIN+21 >> from PID 254 (plymouthd). >> > > > Then, I'm dropped to dracut shell, where I boot the system by using > the lvm commands as described to my first post. Once in O/S, I > re-create initrd by using 'dracut -f -v -a lvm' command and reboot > again the system. But still I get the same error during boot ... > > If you reinstall the latest kernel, does > >> it change anything? >> > > This is actually the latest kernel (3.10.0-862.9.1.el7.x86_64) but I > tried to boot with the second (older) kernel > (vmlinuz-3.10.0-327.36.3.el7.x86_64), where I got exactly the same > error during boot. > > Clearly, this is not a kernel issue, perhaps not even a dracut > (initrd) issue, since everything was working fine, before resizing the > PV/LV. I suspect that something went wrong during that step, but what? > As I can successfully boot the system manually via dracut, normally > everything should be ok? no? > > What can prevent dracut from activating the 2 LVs (centos/root and > centos/swap) during initial boot phase ? > Suggestion: once it's up, rebuild the initramfs. mark ------------------------------ Message: 5 Date: Mon, 30 Jul 2018 22:14:44 +0100 From: Yannis Milios <yannis.milios(a)gmail.com> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <CAFiF2OrJUiNh35M6PBxe=CQrtF1dRYb14b5H4pewTX-EsSm-TA(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Suggestion: once it's up, rebuild the initramfs. > > I tried that already, but still the same problem. Aparently dracut does not want to activate the LVs required to boot to the root filesystem, for some reason ... Yannis -- Sent from Gmail Mobile ------------------------------ Message: 6 Date: Mon, 30 Jul 2018 17:16:51 -0400 From: "mark" <m.roth(a)5-cent.us> To: "CentOS mailing list" <centos(a)centos.org> Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <ce2b2fbed114eda6c7159b25098d48d1.squirrel(a)host290.hostmonster.com> Content-Type: text/plain;charset=utf-8 Yannis Milios wrote: > Suggestion: once it's up, rebuild the initramfs. >> > I tried that already, but still the same problem. > Aparently dracut does not want to activate the LVs required to boot to the > root filesystem, for some reason ... > At this point, I'd start wondering about the grub2 defaults, and the kernel command line. mark ------------------------------ Message: 7 Date: Mon, 30 Jul 2018 23:06:15 +0100 From: Yannis Milios <yannis.milios(a)gmail.com> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <CAFiF2Or5Ave-rhSCMmcD-h7X-sbhGsAGRG6psc0=jxdma7rN5g(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Monday, July 30, 2018, mark <m.roth(a)5-cent.us> > > At this point, I'd start wondering about the grub2 defaults, and the > kernel command line. > > This is Grub config.. [root@localhost ~]# cat /etc/default/grub GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rd.shell rhgb" GRUB_DISABLE_RECOVERY="true" -- Sent from Gmail Mobile ------------------------------ Message: 8 Date: Tue, 31 Jul 2018 08:22:12 +0200 From: "Simon Matter" <simon.matter(a)invoca.ch> To: "CentOS mailing list" <centos(a)centos.org> Subject: Re: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <970e648731344f68e1a1837a94b71d41.squirrel(a)webmail.bi.invoca.ch> Content-Type: text/plain;charset=utf-8 > Yannis Milios wrote: >>> But, what happens if you let the kernel post install scripts do the >>> work or setting up the initrd things? >> >> Initially, I just rebooted from LiveCD and left Grub,kernel and dracut >> do >> their job with the defaults, but unfortunately, boot process stops at >> initrd (dracut) stage with the following error: >> >> [ 197.768159] localhost.localdomain dracut-initqueue[252]: Warning: >> Could >> >>> not boot. [ 197.821409] localhost.localdomain systemd[1]: Received >>> SIGRTMIN+20 from >>> PID 254 (plymouthd). >>> [ 197.822328] localhost.localdomain dracut-initqueue[252]: Warning: >>> /dev/centos/root does not exist >>> [ 197.823044] localhost.localdomain dracut-initqueue[252]: Warning: >>> /dev/centos/swap does not exist >>> [ 197.846807] localhost.localdomain systemd[1]: Starting Dracut >>> Emergency >>> Shell... >>> [ 197.870983] localhost.localdomain systemd[1]: Received SIGRTMIN+21 >>> from PID 254 (plymouthd). >>> >> >> >> Then, I'm dropped to dracut shell, where I boot the system by using the >> lvm commands as described to my first post. Once in O/S, I re-create >> initrd >> by using 'dracut -f -v -a lvm' command and reboot again the system. But >> still I get the same error during boot ... >> >> If you reinstall the latest kernel, does >> >>> it change anything? >>> >> >> This is actually the latest kernel (3.10.0-862.9.1.el7.x86_64) but I >> tried to boot with the second (older) kernel >> (vmlinuz-3.10.0-327.36.3.el7.x86_64), where I got exactly the same error >> during boot. >> >> Clearly, this is not a kernel issue, perhaps not even a dracut (initrd) >> issue, since everything was working fine, before resizing the PV/LV. I >> suspect that something went wrong during that step, but what? As I can >> successfully boot the system manually via dracut, normally everything >> should be ok? no? >> >> What can prevent dracut from activating the 2 LVs (centos/root and >> centos/swap) during initial boot phase ? >> > Suggestion: once it's up, rebuild the initramfs. And when you did so, did you remove the "rd.shell" from GRUB_CMDLINE_LINUX before? Regards, Simon ------------------------------ Message: 9 Date: Tue, 31 Jul 2018 08:40:52 +0100 From: Yannis Milios <yannis.milios(a)gmail.com> To: CentOS mailing list <centos(a)centos.org> Subject: [CentOS] Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs] Message-ID: <CAFiF2Or3nxaJcY44mWjosiTbwb==w2hU95iMpMC4=sTY7Wvn2A(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" And when you did so, did you remove the "rd.shell" from GRUB_CMDLINE_LINUX > before? > > Yes, basically that option was not there by default, I added it during the troubleshootig steps. Normally, rd.lvm.lv=centos/root and rd.lvm.lv=centos/swap are the kernel parameters which are parsed to dracut for enablig the two LVs, but somehow dracut does not. I've copied the log from dracut in here, can this be helpful to locate the problem? https://privatebin.net/?fdc4052c0c402884#gdB/QYR3IeR55SxUbjfrkZPQfJ7jMxiUxq… -- Sent from Gmail Mobile ------------------------------ Message: 10 Date: Tue, 31 Jul 2018 13:31:15 +0200 From: Felix K?lzow <felix.koelzow(a)gmx.de> To: centos(a)centos.org Subject: [CentOS] Increase Disk Space with LVM Message-ID: <1dd31e6b-ee9e-4a00-1bf2-22c0c2f0e699(a)gmx.de> Content-Type: text/plain; charset=utf-8; format=flowed Dear CentOS-Community, we have a server with four hard drives that are configured as raid10 (/dev/sda). Now, /home and /root are almost full. Therefore, we decided to buy four additional hard drives that should configured also as raid 10 (/dev/sdb). I want to use LVM to extend disk space for root and home. My (successful) test procedure in a virtual environment looks like this: 1. devide /dev/sdb into /dev/sdb1 for root and /dev/sdb2 for home using parted 2. Convert disk to physical volume: pvcreate /dev/sdb1 3. add physical volume to volume group (called centos): vgextend centos /dev/sdb1 4. Allocate physical volume to a logical volume:lvextend -l +100$FREE /dev/centos/root 5. resize2fs /dev/centos/root or xfs_grows /dev/centos/root depending on file system used 6. repeat steps 2-6 for /home and sdb2 The mentioned instruction I've got from this page: https://askubuntu.com/questions/458476/adding-disks-with-lvm#459176 Now my question: Is this procedure really safe or is something missing or are there some steps which I overlooked actually? Kind Regards Felix K?lzow ------------------------------ Subject: Digest Footer _______________________________________________ CentOS mailing list CentOS(a)centos.org https://lists.centos.org/mailman/listinfo/centos ------------------------------ End of CentOS Digest, Vol 162, Issue 29 ***************************************

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss August 2018