November 2019 - Discuss - lists.centos.org

Memory vs. Display Card
by Rick 28 Oct '25

28 Oct '25

Since memory has become quite cheap lately I decided to move from 2 GB to 6. When I installed the memory every thing was fine until I went to run level 5. At that point the screen turned to garbage and the system froze. Is there a way to fix this so I can use the memory I bought? Do I need a new display card? Current hardware: Intel D975XBX2 Motherboard VGA compatible controller: ATI Technologies Inc RV505 [Radeon X1550 64-bit] -- http://www.spinics.net/lists/

13 19

SSD for Centos SWAP /tmp & /var/ partition
by Keith Roberts 03 Sep '25

03 Sep '25

Has anyone actually used a SSD in a Centos setup? My little experiment with a s/h WD drive for /tmp and SWAP partitions kicked the bucket on Wednesday, when the poor WD drive caught the click-of-death. It was a s/h drive to start with and lasted about 4 months. But that was without the /var/log/ partition being written to it, as I mounted that back onto /var/log from the original drive. So I had to install another (WD) drive, and repartion it and rebuild my RPM package database, from the backed-up Packages file. That seems to be all OK now. I'm wondering if it would be a good idea to use a new SSD for moving all the disk i/o to, that Linux likes to do so often. Plus putting SWAP onto a decent SSD should speed things up somewhat. Here's a short video of a laptop fitted with a SSD drive booting macOS, compared to a similar laptop booting from the standard HDD. The laptop with the SSD boots and loads some apps in 28 seconds. The other one takes twice as long. http://eshop.macsales.com/shop/SSD/OWC/Mercury_Extreme_Pro_6G/?utm_source=t… Kind Regards, Keith Roberts ----------------------------------------------------------------- Websites: http://www.karsites.net http://www.php-debuggers.net http://www.raised-from-the-dead.org.uk All email addresses are challenge-response protected with TMDA [http://tmda.net] -----------------------------------------------------------------

33 96

Issues booting centos7 [dracut is failing to enable centos/root, centos/swap LVs]
by Yannis Milios 01 Feb '25

01 Feb '25

Hello, I'm having a strange problem booting a new centos7 installation. Below some background on this. [I have attached the tech details at the bottom of this message] I started a new CentOS7 installation on a VM, so far all good, o/s boots fine. Then I decided to increase VM disk size (initially was 10G) to 13G. Powered off the VM, increased the vhd via the hypervisor, booted from CentOS livecd, selected "recover my centos installation". Then I used the following sequence of commands to make the new vhd size "visible" to the o/s ... - ran fdisk /dev/sda and deleted partition 2. (This is the LVM partition where the o/s is stored. The first partition is /boot [xfs] partition *non lvm*.) - created a new partition with same starting sector as before deleting it, but a different ending sector (to reflect to the increased space). - set partition type to 8e (lvm), saved settings and exit. - ran pvresize and lvresize to make new space visible to the o/s.All good, I can see the space increase on 'lvdisplay centos/root'. - ran 'mount /dev/mapper/centos-root /mnt/root' to temporarily mount the o/s partition. - ran 'xfs_growfs /mnt/root' to resize the o/s fs to the new size. It was successful and I could actually chroot to the o/s and verify new disk size. - rebooted and tried to boot from hdd this time. Grub menu shows up and loads default kernel (3.10.0-862.9.1.el7.x86_64). - after initial kernel boot up process, booting continues to initrd and then it's where the problem starts... - looks like dracut has issues locating/enabling /dev/mapper/centos-root (lv) and as a result it cannot boot to the 'real' root fs (/). - while in dracut shell, I execute the following command sequence: 1. lvm lvchange -ay /dev/centos/root 2. lvm lvchange -ay /dev/centos/swap 3. ln -s /dev/mapper/centos-root /dev/root 4. exit ...and the o/s boots fine...so looks like the pv,vg,lv is detected properly while in initrd, but somehow dracut has difficulties enabling the root,swap LVs ? - While in o/s, I rebuild initrd by using: 'dracut -f -v -a lvm' Note, I have to use '-a lvm' as for some reason, if don't, the lvm utils (lvm,lvm_scan) are not being included to the initrd, not sure why this happens. After rebooting, same thing happens, I have to manually boot the system via dracut shell. I'm a bit stuck at this point, any clues what I'm doing wrong in here ? As I previously said, this is a new installation, so I could simply reinstall the whole thing, but I would rather try to find out some answer to why is this happening ... :-) [curiosity] Some additional details: ================== I've attached /run/initramfs/rdsosreport.txt file [generated while in inird] here: https://privatebin.net/?fdc4052c0c402884#gdB/QYR3IeR55SxUbjfrkZPQfJ7jMxiUxq… o/s ver=CentOS Linux release 7.5.1804 (Core) [root@localhost ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 13G 0 disk ├─sda1 8:1 0 500M 0 part /boot └─sda2 8:2 0 12.5G 0 part ├─centos-root 253:0 0 11.5G 0 lvm / └─centos-swap 253:1 0 1G 0 lvm [SWAP] [root@localhost ~]# cat /etc/default/grub GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)" GRUB_DEFAULT=saved GRUB_DISABLE_SUBMENU=true GRUB_TERMINAL_OUTPUT="console" GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rd.shell rhgb" GRUB_DISABLE_RECOVERY="true"

4 11

MATE 1.20 test build for CentOS 7 available
by Greg Bailey 14 Oct '21

14 Oct '21

Hi everyone, There's been discussions in the past about updating MATE RPMs in EPEL-7: https://bugzilla.redhat.com/show_bug.cgi?id=1436260 https://lists.centos.org/pipermail/centos/2019-August/173154.html (and lots of others...) As a proof-of-concept, I've written some scripts that clone specific commits from the Fedora master branches, and then runs a tool to re-apply RPM scriptlets that are required by EL7 but removed from the Fedora .spec files. The scripts are available at: https://github.com/gebailey/mate-rpms/tree/master/1.20/el7 There's also instructions there if you want to try upgrading to MATE 1.20 w/o rebuilding them yourself. If these packages work for others, perhaps we can revisit the idea of updating the epel7 branches of the Fedora git repos and submitting an official update. There's nothing here (yet) about building MATE 1.22 (which might require a newer gcc for EL7), or building anything on CentOS 8, but thought the CentOS 7 users might find this helpful. -Greg

6 17

Brother HL-L2360DW printing quality
by H 23 Jul '20

23 Jul '20

I have the above printer but have not been able to resolve issues with the printing quality in CentOS 7. The test page prints fine but when I print PDF-documents, most recently using Chinese fonts, it is lacking and the pages very hard to read. The settings in the Mate Cups configuration panel are fine and set to 600 dpi, the settings in the printer menu are all OK yet it prints more like maybe 150 or even 75 dpi. Any suggestion what might be wrong?

3 7

CentOS 7 kickstart repo directive
by isdtor 08 Feb '20

08 Feb '20

Is the kickstart repo directive broken under CentOS 7? Every attempt with a repo directive in the kickstart file fails during the software selection step. Removing the repo directives and the packages from those repos under %packages makes it work. On console 2, I have verified that the (NFS) repos specified in the kickstart file are mounted and that the repo metadata has been copied over to /tmp/yum.cache. One of the packages from one of the repos that is explicitly listed under the %packages section appears in packaging.log for dependency checking. The custom repos work fine with yum on a running machine, so there is no problem with the metadata. Logging is poor and does not log what is actually wrong.

2 2

Re: [CentOS] upg. CentOS 7.5 to 7.6: unable to mount smb shares - samba NT domain member using ldap
by Gordon Messmer 27 Jan '20

27 Jan '20

On 1/2/19 12:09 PM, Miroslav Geisselreiter wrote: > some parameters from smb.conf: > [global] > workgroup = NT4DOMAIN > netbios name = nt4member > security = domain > passdb backend = ldapsam:"ldap://ldap1server.intranet.xx > ldap://ldap2server.intranet.xx" I'm not sure it makes sense to use "security = domain" with an ldap passdb backend. If you're using a real NT4 domain, then you shouldn't need a passdb backend at all. If you're not in an NT4 domain, then you should set "security = USER". The man page for smb.conf notes "This mode will only work correctly if net(8) has been used to add this machine into a Windows NT Domain." Did you add this host to a Windows NT domain, using "net join ..."?

3 7

CentOS 7.6 1810 vs. VirtualBox : bug with keyboard layout selection
by Nicolas Kovacs 20 Jan '20

20 Jan '20

Hi, I'm currently working on my next Linux book, which will be an elementary course about CentOS administration. I'm using VirtualBox for all the installer screenshots. Since CentOS has recently been upgraded to version 7.6, I thought I might as well base all book references on this version. So I downloaded the 7.6 1810 minimal ISO and started a fresh installation in VirtualBox. I'm using a Swiss French keyboard layout (ch-fr or fr_CH-latin1), so one of the first things I do in the installer is replace the default French AZERTY keyboard (since I use the french language) by a swiss french QWERTZ layout. Now when I reach this dialog in the installer and try do define my new layout, the slider in the selection window doesn't appear, and clicking on any of the first layouts doesn't do anything, so I'm basically stuck there. I'm running OpenSUSE Leap 15.0 KDE on my workstation, so I tried the same thing with the previous CentOS 7.5 1804 minimal ISO, and the keyboard selection dialog works perfectly. So my intuition would tell me that there's a nasty bug in the CentOS 7.6 installer. Maybe it went unnoticed, since most folks stick to the default keyboard layout selected in their language. Any suggestions ? Cheers, Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Blog : https://blog.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32

7 11

CentOS 7 as a Fibre Channel SAN Target
by Steffan A. Cline 02 Jan '20

02 Jan '20

For quite some time I’ve been using FreeNAS to provide services as a NAS over ethernet and SAN over Fibre Channel to CentOS 7 servers each using their own export, not sharing the same one. It’s time for me to replace my hardware and I have a new R720XD that I’d like to use in the same capacity but configure CentOS 7 as a Fibre Channel target rather than use FreeNAS any further. I’m doing virtualization and this will allow me to have failover from one node to the other since they’ll all be sharing the same export rather than me simply backing up to the FreeNAS server the way I am now. Does anyone know of any really good current articles that explain how to set up CentOS 7 as the target in such a configuration and also setting up CLVMd so they can all share an export over Fibre Channel from CentOS 7? Steffan A. Cline steffan(a)hldns.com 602-793-0014

2 1

Wonky Firefox 68.0.1esr upgrade
by Kay Schenk 15 Dec '19

15 Dec '19

I just applied a bunch of updates to my CentOS 7 system yesterday, one of which was a Firefox update to 68.0.1esr. Now when I bring up sites I would log in to -- my bank, credit cards, etc., the Password box is wonky and shakes and doesn't display successive dots for characters I type, nor does it accept what I type. My work around currently is to type the password first, then my userid but ???!!!!! Using either a <tab> to get to the Password box or just a click in the Password box causes the same results. Previous Firefox version which worked fine --firefox-60.8.0-1.el7.centos.x86_64 HELP! -- "And in the end, only kindness matters." -- Jewel, "Hands" ______ MzK

1 3

browsers slowing Centos 7 installation to a crawl
by Michael Hennebry 04 Dec '19

04 Dec '19

My video problems mentioned in a previous thread are gone, though I do not know why. Now my problem is that whenever I have a browser open and an internet connection, my Centos 7 slows to a crawl. Chromium seems to be the least bad. Sometimes it slows to the point that I cannot even move the mouse. Even switching between virtual terminals takes a while sometimes. When I get there, top generally shows me between two and five D states. I've changed service providers lately. The problem survived the change. Some sites seem to aggravate the problem. Most recently, a site tried to connect to c.amazon.adsystem.com . I got the message waiting for c.amazon.adsystem.com . I have that address in my hosts file as 127.0.0.1 . ping finds it and pings. nslookup does not: > [hennebry@localhost ~]$ nslookup c.amazon.adsystem.com > Server: 192.168.0.1 > Address: 192.168.0.1#53 > > ** server can't find c.amazon.adsystem.com: NXDOMAIN Whether the slow-to-crawl problem is related to the failure to redirect, I do not know. The former is clearly more important. Any suggestions on how to diagnose it? Any ideas on why chromium is waiting for c.amazon.adsystem.com and how I can fix it? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

13 45

CLAMD and EXIM - anyone got it working`
by Gary Stainburn 01 Dec '19

01 Dec '19

Has anyone actually got CLAMD and EXIM working? I've just had a go on a new VPS server without success. The only thing that happened was that my server slowed because clamd was hogging CPU. I have done a lot of googling and all I found was a couple of howto's that said the same thing, and my questions from 2015 which is the last time I tried this. I can get clamd / freshclam etc installed, although from the two howto's I worked from I had to edit / create service files and edit config files. However, I still do not manage to get a clamd.exim socket created on my system.

3 2

External HD partitioning & formatting considerations
by Nicolas Kovacs 01 Dec '19

01 Dec '19

Hi, One of my clients has a mixed Linux/Mac OS/Windows environment in his office. He just purchased a 4 TB external hard disk, which he intends to use on his various workstations. Up until recently, I've been using plain old MBR/FAT for hard disks in mixed environments. Fire up fdisk, make one big 0b type partition, and then format it using mkdosfs. Unfortunately, there's a 2 TB limit to that. Of course, I could still use a GPT partition, but then I'd still have to format it using a "common denominator" filesystem, e. g. FAT... which is also limited to 2 TB as far as I know. So what now? Use Windows 10 to format the disk using NTFS? This, Windows and Linux could use it, and I'd have to check if Mac OS can manage NTFS file systems. A few years ago, it didn't. Any suggestions? Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

7 8

systemd: Failed unmounting /var on reboot, should I worry about fs corruption?
by Ján Lalinský 30 Nov '19

30 Nov '19

Hi all, I have Centos 8 installed on a physical machine (www6) with separate LVM volumes for /, /var, /var/lib/mysql etc. System boot proceeds without a hiccup, in terminal systemctl status says everything is OK and running, journalctl says so as well - systemd mounts everything stated in fstab. However, on reboot systemd echoes problems with filesystem on /var : ...// unmounting all volumes Nov 26 23:51:30 www6 systemd[1]: Unmounting /var... Nov 26 23:51:30 www6 umount[2118]: umount: /var: target is busy. Nov 26 23:51:30 www6 systemd[1]: Stopped target Swap. Nov 26 23:51:30 www6 systemd[1]: Deactivating swap /dev/disk/by-label/lv_swap... Nov 26 23:51:30 www6 systemd[1]: var.mount: Mount process exited, code=exited status=32 Nov 26 23:51:30 www6 systemd[1]: Failed unmounting /var. Then proceeds and reboots the machine. This occurs on every reboot. Did anybody here encounter similar problems on reboot? I found this bug https://github.com/systemd/systemd/issues/867 which was closed without a definitive solution, the developer says the issue is hard to solve and just cosmetic since /var gets unmounted in the end anyway, which is strange because there is a log line about unmounting just about every other mountpoint and in the end of the journal, there are about 7 log lines about unmounting swap volume, but zilch about /var. If the system is getting down without proper unmount, data corruption can happen. I would feel much better if there were no such errors... My /etc/fstab: /dev/mapper/vg_www6-lv_root / xfs defaults,noatime 0 1 /dev/mapper/vg_www6-lv_var /var xfs defaults,noatime 0 0 /dev/mapper/vg_www6-lv_swap swap swap defaults 0 0 /dev/mapper/vg_www6-lv_tmp /tmp xfs defaults,noatime 0 0 /dev/mapper/vg_www6-lv_usr_local /usr/local xfs defaults,noatime 0 0 UUID=XXX /boot xfs defaults 0 0 #/dev/mapper/vg_www6-lv_tmp_mysql /tmp_mysql xfs defaults,noatime 0 0 tmpfs /tmp_mysql tmpfs defaults,noatime,nosuid,nodev,noexec,mode=0755,size=5G 0 0 /dev/mapper/vg_www6-lv_var_lib_mysql /var/lib/mysql xfs defaults,noatime,uquota,gquota 0 0 /dev/mapper/vg_www6-lv_data /data xfs defaults,noatime,uquota,gquota 0 0 -- S pozdravem Ján Lalinský Webhosting C4 ČESKÝ WEBHOSTING s.r.o. Tel: +420 234 139 876 E-mail: info(a)c4.cz http://www.c4.cz

2 2

Help with dracut install CentOS 8
by Jerry Geis 29 Nov '19

29 Nov '19

I am trying to specify a static IP on the new dracut format. I was using this: http://man7.org/linux/man-pages/man7/dracut.cmdline.7.html So my grub entry consists menuentry "Install CentOS 8" { linux /boot/vmlinuz noverifyssl ks=https://something ip=192.168.1.3::192.168.1.1:255.255.255.0::eth0:on:192.168.1.1 biosdevname=0 net.ifnames=0 ksdevice=eth0 inst.sshd sshd=1 initrd /boot/initrd.img } This seems OK to me. But rebooting to start the install for CentOS 8 it just stops and says "system halted". the lines above that have no errors. .3 is the IP I want to use .1 is the GW and the Nameserver in this case. Thanks, Jerry

4 6

Upgrade Centos 6 (32 Bits) to Centos 7 (32 Bits)
by Ger van Dijck 27 Nov '19

27 Nov '19

Hi all , I have a very old PC ( Acer2000) 32 Bits. On this machine I am running (Do not laugh) SCO Unix in an antique version : So Centos6 probes with the bootloader on this OS and other OS s. Is there a way to opgrade Centos 6 to Centos 7 in the 32 Bits architecture ? Any help would be usefull. Regards. Ger van Dijck. -- Using Opera's mail client: http://www.opera.com/mail/

10 9

November 13 Board of Director meeting minutes
by Rich Bowen 27 Nov '19

27 Nov '19

The minutes from the November 13th Board of Director meeting are now available on the CentOS blog, at https://blog.centos.org/2019/11/minutes-for-centos-board-of-directors-2019-… -- Rich Bowen - rbowen(a)redhat.com @CentOSProject // @rbowen 859 351 9166

1 0

printer frustrations
by mark 26 Nov '19

26 Nov '19

I've got an old HP LaserJet 1018. It's a winprinter. After I bought a new router (to go inside the Verison one), I plugged it directly into my box (ok, via a hub). I run CentOS 6. Before we went on the trip, I could print, I upgraded my system, and this is the first time I'm trying to print... and no joy. I've tried sending the firmware to it via lp -o raw ... -h :9100, and maybe? it worked, but no printing. I've upgraded to the latest foo2jzs driver and .ppd, and nothing. Any ideas? CUPS since to think it can talk to it.... Yes, the system can see the printer.... mark

2 2

My ethernet is not listed in centOS 8 boot.iso
by Ebed 26 Nov '19

26 Nov '19

Hi, Yesterday i tried to install centOS 8 on my little router and server, but there's no ethernet listed there. I'm using Compaq pressario V3737TU which come with Marvell PCI-e ethernet 100Mbps. It's an old laptop. Could anyone here help?

3 13

yum4 and dnf on CentOS 8
by Sergio Belkin 25 Nov '19

25 Nov '19

Hi, I was using yum for years on CentOS servers, and since a few years ago dnf on Fedora desktops. My question is: Is the same yum4 on CentOS 8 that dnf? What should I use? Thanks in advance -- -- Sergio Belkin LPIC-2 Certified - http://www.lpi.org

3 3

CentOS 8 and libssh2.h
by Jerry Geis 25 Nov '19

25 Nov '19

I am trying to find libssh2.h In the past I installed libssh2-devel I have libssh2 installed. I have tried yum install libssh2-devel - nothing found yum provides "*/libssh2.h" - nothing found yum search libssh2.h - nothing found. Thoughts ? Jerry

2 1

FINAL call for content, FOSDEM CentOS Dojo
by Rich Bowen 25 Nov '19

25 Nov '19

Ok, folks, last call for content for the FOSDEM CentOS Dojo, January 31 in Brussels. https://wiki.centos.org/Events/Dojo/Brussels2020 Note that as of right now, I'm going to have to cancel one of the two rooms for the event, because we don't have enough content. So please submit your proposals about the interesting things you're doing on CentOS, so that we can put together another awesome event. Thanks. -- Rich Bowen - rbowen(a)redhat.com @CentOSProject // @rbowen 859 351 9166

1 0

Re: [CentOS] IBM x3500 M3 and CentOS 7.*
by Mark (Netbook) 24 Nov '19

24 Nov '19

Hello, Please can anyone help with the problem below when trying to install CentOS 7.6 on an IBM x3500 M3 from DVD or USB. CentOS 7.5 installs perfectly with no errors. CentOS 7.6 tries to boot, an error is output briefly and the workstation powers down. CentOS 7.7 displays the error briefly then continues the install with no further errors. I also tried RHEL 7.6 which installs perfectly with no errors. Any ideas? Regards, Mark Woolfson MW Consultancy Ltd Leeds LS18 4LY United Kingdom Tel: +44 113 259 1204 Mob: +44 786 065 2778

3 2

Installing Maven with OpenJDK 11, without pulling OpenJDK 1.8
by Mathieu Baudier 23 Nov '19

23 Nov '19

Hello, I am trying to create a container image which will build Java software with Maven and Java 11 (rather focussing on CentOS 8 here). When installing 'maven' with yum, 'java-1.8.0-openjdk-devel' is installed as a dependency. If one then installs 'java-11-openjdk-devel', and use the update-alternatives command for java and javac, everything works fine and Maven uses Java 11 for the build. But I would like to avoid shipping OpenJDK 1.8 with the image, since it would uselessly double its size. An approach would be to install Maven manually, but it feels better to use the provided package. Looking at the spec file, I understand that the 'maven' package requires 'java-devel' without explicitly specifying a version. Is there some way (configuration, yum option, alternative, etc.) to make OpenJDK 11 satisfying this dependency? Could the new modules / app stream approach of CentOS 8 help here? This is of course a more general RPM / yum question, but I suspect that the Java use case is a recurring one, as many of us are currently upgrading from 1.8 to 11. Thanks in advance for hints, or telling me that there is no way to achieve this, Mathieu

2 1

Time tracking software
by H 23 Nov '19

23 Nov '19

I am looking for suggestions for open-source time tracking software to run on CentOS. If the data can be stored in my own central database, that is a plus, as is the potential availability of some client that can run on Android. Thank you.

1 0

DHCP server failover: advise is needed
by Valeri Galtsev 22 Nov '19

22 Nov '19

Dear Experts, I was running ISC DHCP server for longer than I would care to remember. Now I decided to climb out of the cave and configure failover set (primary-secondary), and I seem to hit brick wall, which I need help with. I only need IP v4, no v6, which may simplify things. Could someone point to a description of working DHCP failover configuration? I do not want to make two independent DHCP servers handling half of the pool each. We are not that rich as far as IP space is concerned. I am not married to ISC DHCP server, so any one I will do, because: <rant> My current configuration is something that was gradually migrated and/or adjusted through several generations of systems, and server versions over the years. It works. When I tried to incorporate what I need for failover following ISC documentation, and some people's guides, I discovered, I need more sophisticated structure of sections and subsections, which I figured out finally. But the annoying part was: in ISC documentation I failed to find general stricture of which section can appear inside which; like: a { b { c { } } } You can create each of sections/subsections following documentation, but to put them together making consistent config file you (I at least) have to figure on your own which section goes inside of which. </rant> So, I am not married to ISC DHCP server, we didn't get along now as far as my use of documentation is concerned. Anything that works - with failover! I am going to have it set up on FreeBSD, but if something works on Linux, I likely will be able to reproduce it on FreeBSD. Thanks in advance for all your answers! Valeri -- ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++

3 4

sendmail on Centos 7.7
by Jerry Geis 22 Nov '19

22 Nov '19

Hi All, I am 'trying' to set SMART_HOST in sendmail to point to smtp-relay.gmail.com but when looking at the /var/log/maillog its going to mx203.inbound-mx.net. [192.110.255.243], why??? my line from sendmail.mc define(`SMART_HOST', `smtp-relay.gmail.com') I did make in /etc/mail and service sendmail restart This is the only SMART_HOST in the config file. I started with the default CentOS 7.7 sendmail.mc and have not added anything else. just changed teh SMART_HOST. Why is mail relay to mx203.inbound-mx.net ???? Nov 22 08:16:00 lsi001 sendmail[9286]: xAMDFxlA009286: to= user.someone(a)gmail.com, ctladdr=root (0/0), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=30197, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (xAMDFxjQ009287 Message accepted for delivery) Nov 22 08:16:00 lsi001 sendmail[9289]: STARTTLS=client, relay= mx203.inbound-mx.net., version=TLSv1/SSLv3, verify=FAIL, cipher=AES256-SHA, bits=256/256 Nov 22 08:16:01 lsi001 sendmail[9289]: xAMDFxjQ009287: to=< user.someone(a)gmail.com>, ctladdr=<root(a)machine.somewhere.com> (0/0), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120519, relay= mx203.inbound-mx.net. [192.110.255.243], dsn=2.0.0, stat=Sent (Queued!) Thanks. How do find out why its going to the wrong place ? Jerry

5 9

Re: [CentOS] sendmail on Centos 7.7
by Richard 22 Nov '19

22 Nov '19

> Date: Friday, November 22, 2019 08:21:57 -0500 > From: Jerry Geis <jerry.geis(a)gmail.com> > > Hi All, > > I am 'trying' to set SMART_HOST in sendmail to point to > smtp-relay.gmail.com but when looking at the /var/log/maillog its > going to mx203.inbound-mx.net. [192.110.255.243], > > why??? > > my line from sendmail.mc > define(`SMART_HOST', `smtp-relay.gmail.com') > I did make in /etc/mail and service sendmail restart > > This is the only SMART_HOST in the config file. I started with the > default CentOS 7.7 sendmail.mc and have not added anything else. > just changed teh SMART_HOST. > > Why is mail relay to mx203.inbound-mx.net ???? > > Nov 22 08:16:00 lsi001 sendmail[9286]: xAMDFxlA009286: to= > user.someone(a)gmail.com, ctladdr=root (0/0), delay=00:00:01, > xdelay=00:00:01, mailer=relay, pri=30197, relay=[127.0.0.1] > [127.0.0.1], dsn=2.0.0, stat=Sent (xAMDFxjQ009287 Message accepted > for delivery) > Nov 22 08:16:00 lsi001 sendmail[9289]: STARTTLS=client, relay= > mx203.inbound-mx.net., version=TLSv1/SSLv3, > verify=FAIL, cipher=AES256-SHA, bits=256/256 > Nov 22 08:16:01 lsi001 sendmail[9289]: xAMDFxjQ009287: to=< > user.someone(a)gmail.com>, ctladdr=<root(a)machine.somewhere.com> (0/0), > delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120519, relay= > mx203.inbound-mx.net. [192.110.255.243], dsn=2.0.0, stat=Sent > (Queued!) > > Thanks. How do find out why its going to the wrong place ? I would start by looking at the .cf file to make certain that it got written out correctly. You should find lines like: # "Smart" relay host (may be null) DSsmtp-relay.gmail.com If that looks right, then see what happens when you do dns queries for "smtp-relay.gmail.com" on that machine.

1 0

Re: [CentOS] Issue with "ExecStartPost" attribute in systemd daemon fail
by Gestió Servidors 22 Nov '19

22 Nov '19

Hi, it seems there is no difference in "systemctl status crond" :( El 22/11/2019 a las 13:00, centos-request(a)centos.org<mailto:centos-request@centos.org> escribió: Message: 3 Date: Thu, 21 Nov 2019 14:41:25 +0100 From: Leon Fauster <leonfauster(a)googlemail.com><mailto:leonfauster@googlemail.com> To: centos(a)centos.org<mailto:centos@centos.org> Subject: Re: [CentOS] Issue with "ExecStartPost" attribute in systemd daemon faile Message-ID: <b58a12c2-5e5c-f7ce-d69d-d464538f1972(a)gmail.com><mailto:b58a12c2-5e5c-f7ce-d69d-d464538f1972@gmail.com> Content-Type: text/plain; charset=utf-8; format=flowed Am 21.11.19 um 14:28 schrieb Gesti? Servidors: Hello, I'm trying to configure a daemon (I'm doing tests with "crond" daemon) to send me an email after daemon restart. My "crond.service" file is: # /etc/systemd/system/crond.service [Unit] Description=Command Scheduler After=auditd.service systemd-user-sessions.service time-sync.target #OnFailure=crond-notify-email(a)%i.service [Service] EnvironmentFile=/etc/sysconfig/crond ExecStart=/usr/sbin/crond -n $CRONDARGS ExecReload=/bin/kill -HUP $MAINPID KillMode=process Restart=on-failure RestartSec=10s ExecStartPost=/bin/sh -c "/etc/systemd/system/test.sh" [Install] WantedBy=multi-user.target My "test.sh" is very simple: #!/bin/sh echo "CROND is restarting" | /usr/bin/mailx -s "crond failure notification" myemailaddress@mydomain As you can see, I have added lines "Restart=on-failure", "RestartSec=10s" and " ExecStartPost=/bin/sh -c "/etc/systemd/system/test.sh"" to the original crond.service daemon file. Then, I run "systemctl daemon-reconfigure" and, from one console, I run "kill -9 `pidof cron`" for restarting crond daemon. After it, I receive an email... But now, if I run again ""kill -9 `pidof cron`", I don't receive any mail... I have notice that if I run "systemctl daemon-reload" and then kill crond process, mail is sent perfectly... but if I don't run "systemctl daemon-reload", mail is sent ONLY first time... Why? What is "status" showing (systemctl status crond)? For both cases (first/second kill)? Any differences? -- Leon

1 0

CentOS-announce Digest, Vol 177, Issue 5
by centos-announce-request＠centos.org 22 Nov '19

22 Nov '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2019:3856 CentOS 6 udev BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 21 Nov 2019 17:00:13 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:3856 CentOS 6 udev BugFix Update Message-ID: <20191121170013.GA5573(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:3856 Upstream details at : https://access.redhat.com/errata/RHBA-2019:3856 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e238940087eba7a77b8e80ddc062fb8b27d1c2154e7216c14615c62a11bb1171 libgudev1-147-2.74.el6_10.i686.rpm fe383c264f0d1d887fbc3103bc78a9d379b7bdf0e54830d2be489b94ad969c42 libgudev1-devel-147-2.74.el6_10.i686.rpm 109fb20d3900b3997b0a5e9ffbdc0d6dfe2cc612921b81f58c50a9029f7fa9d9 libudev-147-2.74.el6_10.i686.rpm 763903775dc41c7e615ac6b81475c86a7fc021d7374d19fccbbb25af1d9c38b7 libudev-devel-147-2.74.el6_10.i686.rpm e6dc596d6e4b71fec1d61a1b97d79c980213c2bb181856b9c502808b32511deb udev-147-2.74.el6_10.i686.rpm x86_64: e238940087eba7a77b8e80ddc062fb8b27d1c2154e7216c14615c62a11bb1171 libgudev1-147-2.74.el6_10.i686.rpm a2084d7196fc5fadb1ade692409247fef882c86dda0fc019c6bd258d53493793 libgudev1-147-2.74.el6_10.x86_64.rpm fe383c264f0d1d887fbc3103bc78a9d379b7bdf0e54830d2be489b94ad969c42 libgudev1-devel-147-2.74.el6_10.i686.rpm ad3e6b2c8fc162981001985a3109cf11e4e61978bedc995a4425608cf5b6fdf9 libgudev1-devel-147-2.74.el6_10.x86_64.rpm 109fb20d3900b3997b0a5e9ffbdc0d6dfe2cc612921b81f58c50a9029f7fa9d9 libudev-147-2.74.el6_10.i686.rpm d2a3a49abcaf44923af02a46b3a33dd79325365f8560d7a570609b96286cdb4e libudev-147-2.74.el6_10.x86_64.rpm 763903775dc41c7e615ac6b81475c86a7fc021d7374d19fccbbb25af1d9c38b7 libudev-devel-147-2.74.el6_10.i686.rpm 4bbf43f5a02ec59527c1fd8909fb7f85ff5c47a9bb38bf81f3fbbc6ec282481b libudev-devel-147-2.74.el6_10.x86_64.rpm 226ab4ca0abe61cfe9b7b91ae9185087f39ddc4338aea7b22bf0f54717f5da31 udev-147-2.74.el6_10.x86_64.rpm Source: 43ceefd949dc838ce1fc222bb4e8b00f7198e4433277a6ac2e574479517e3ee2 udev-147-2.74.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 177, Issue 5 ***********************************************

1 0

Issue with "ExecStartPost" attribute in systemd daemon faile
by Gestió Servidors 22 Nov '19

22 Nov '19

Hello, I'm trying to configure a daemon (I'm doing tests with "crond" daemon) to send me an email after daemon restart. My "crond.service" file is: # /etc/systemd/system/crond.service [Unit] Description=Command Scheduler After=auditd.service systemd-user-sessions.service time-sync.target #OnFailure=crond-notify-email(a)%i.service [Service] EnvironmentFile=/etc/sysconfig/crond ExecStart=/usr/sbin/crond -n $CRONDARGS ExecReload=/bin/kill -HUP $MAINPID KillMode=process Restart=on-failure RestartSec=10s ExecStartPost=/bin/sh -c "/etc/systemd/system/test.sh" [Install] WantedBy=multi-user.target My "test.sh" is very simple: #!/bin/sh echo "CROND is restarting" | /usr/bin/mailx -s "crond failure notification" myemailaddress@mydomain As you can see, I have added lines "Restart=on-failure", "RestartSec=10s" and " ExecStartPost=/bin/sh -c "/etc/systemd/system/test.sh"" to the original crond.service daemon file. Then, I run "systemctl daemon-reconfigure" and, from one console, I run "kill -9 `pidof cron`" for restarting crond daemon. After it, I receive an email... But now, if I run again ""kill -9 `pidof cron`", I don't receive any mail... I have notice that if I run "systemctl daemon-reload" and then kill crond process, mail is sent perfectly... but if I don't run "systemctl daemon-reload", mail is sent ONLY first time... Why? Thanks.

3 4

Is there an sshguard script for logwatch?
by Adrian van Bloois 21 Nov '19

21 Nov '19

Hi all, I wonder if there is a script to analyze logfiles for llogwatch and sshguard? Anyone knows? Adrian -- Adri P. van Bloois "Elegance is not a dispensable luxury but a factor that decides between success and failure." Edsger W. Dijkstra

3 2

can't login as subsequent FreeIPA users
by Carson Chittom 21 Nov '19

21 Nov '19

When I set up a machine with CentOS 8, I used the "Enterprise Login" in the initial setup wizard to authenticate against my FreeIPA server. This worked fine, and I have no issues logging in with that initial user. However, I am unable to use GDM or the console to login as any *other* valid user from FreeIPA. From GDM I get something like "Sorry, that didn't work" and "Permission denied" on the console. I've verified that the credentials are correct, and that I am able to manually get a ticket via kinit for one of those other users from this machine. With CentOS 7, I didn't have to do any additional configuration in this regard after the initial wizard. Not sure whether this is a CentOS configuration issue or a FreeIPA one, but I figured I'd start here. I'm also not terribly familiar with FreeIPA, so I could be missing something obvious; but this worked without issue when the machine in question ran CentOS 7. Can somebody point me in the right direction?

3 3

C8 and NetworkManager problem
by Alessandro Baggi 20 Nov '19

20 Nov '19

Hi list, I've installed C8 on my workstation. I configured my network devices (two bridges, two nics) using nmcli. Now that NM is the default I tried it. On C7 I always disabled it. I noticed some problem: 1) During the boot, also if NetworkManager-wait-online.service status is OK, I noticed that opening a terminal and ping some address it needs some time to perform ping and any operation on a network connection. So seems that in the first 30sec/1min there isn't an available network connection. After this time if I run a ping or whatever network is available. 2) Due to the problem 1, It cannot mount samba shares on boot saying "Not suitable address found". After the network is available I can mount samba shares. 3) I noticed that with NetworkManager a bridge must have an address. If I don't specify an address for the bridge, NM will try to assign some address, enable the connection forever (reporting errors in messages and on notification bar). 4) NetworkManager-wait-online slow down boot time and network availability. To solve this problem I installed network-scripts and disabled NetworkManager but I don't understand why NetworkManager need so much time to enable a connection. Can someone point me in the right direction? Thanks in advance.

5 11

qemu-kvm
by Jerry Geis 20 Nov '19

20 Nov '19

I am running this command /usr/libexec/qemu-kvm -no-acpi -smp 4 -m 2048 -drive file=myimg.img,format=raw -vga std -device rtl8139 and expecting a window to open up for the console. It does not. This is on CentOS 8. Do I have something missing/not installed - or something wrong on the command line. Jerry

3 4

CentOS7 sometimes don't detect NIC after reboot
by Miroslav Geisselreiter 20 Nov '19

20 Nov '19

I have brand new PC with this components: CPU Intel® Pentium G5400, LGA1151 motherboard ASUS PRIME B360M-C 16 GB RAM HDD 2x ADATA SSD 256GB XPG GAMMIX S11, PCIe Gen3x4 M.2 2280 (RAID1) NIC Intel X550-T1 Ethernet Converged Network Adapter I installed CentOS 7 and two NICs were detected: eno1 (on motherboard) enp1s0 (Intel X550-T1) When I restart the machine sometimes enp1s0 is missing. It is not detected during boot. It looks like NIC card is not installed / not present. After next reboot everything is fine and I do not see any problems with NIC card. How can I avoid this problem with missing NIC? Can you help me, please? Miroslav Geisselreiter

4 10

Mirroring two screens for all users?
by James Pearson 20 Nov '19

20 Nov '19

We would like to have one workstation (CentOS7 with Gnome3) set up that has mirrored/cloned screens for all users that may login The workstation is using an Nvidia (proprietary) driver for the graphics card. We have set up xorg to use cloned screens, but gdm/Gnome3 appears to ignore these setting and only use what is set in ~/.config/monitors.xml We've set up /var/lib/gdm/.config/monitors.xml with mirrored/cloned settings for the login screen, but when a user logs in, the display switches to spanning both screens Is there any way we can force all user logins to use cloned displays on this one workstation (but not affect any settings they may use on other workstations - all users has NFS mounted home directories) ? Thanks James Pearson

1 0

Virtualizing on CentOS 8
by Jerry Geis 19 Nov '19

19 Nov '19

I am trying to get going with CentOS 8. In the past I would run qemu-system-x86_64 -hda myfile.img get a console and off we go. I dont with to use virt-manager and the gui and all - I just wish to have a similar command line to boot up and run my img. Is there something like that I'm not finding ? I have found virsh - but I dont see how to make it run with an image file from the command line. Perhaps I'm missing something. Thanks, Jerry

3 3

CentOS 8 boot command line
by Jerry Geis 18 Nov '19

18 Nov '19

I am trying to boot a grub entry for CentOS 8 menuentry "Server Install CentOS 8" { linux /boot/vmlinuz noverifyssl ks= https://devgeis.LayeredSolutionsInc.com:443/kickstart/ks_update_to_server8.… biosdevname=0 net.ifnames=0 ksdevice=eth0 ip=192.168.1.13 gateway=192.168.1.1 netmask=255.255.255. 0 nameserver=192.168.1.1 inst.sshd sshd=1 initrd /boot/initrd.img } When booting it says that "ip=192.168.1.3" Sorry unknown value. This works on CentOS 7. How do I specify the IP/SN/GW for CentOS kernel line? Thanks, Jerry

4 8

Post-installation setup script for CentOS 7 servers
by Nicolas Kovacs 18 Nov '19

18 Nov '19

Hi, I just sanded down the remaining edges of my CentOS 7 post-install configuration script and published it on a Github repository, along with some detailed instructions. * https://github.com/kikinovak/centos-setup Feel free to use it (and/or adapt it to your needs). Cheers from the sunny South of France, Niki -- Microlinux - Solutions informatiques durables 7, place de l'église - 30730 Montpezat Site : https://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32 Mob. : 06 51 80 12 12

6 11

Re: [CentOS] Firefox 68 jnlp files
by Clark, Patti 18 Nov '19

18 Nov '19

icedtea-web package included with the distros is the plugin that handles javaws for firefox for both RHEL/CentOS 6 and 7 and openjdk. I have yet to find an app that cannot use openjdk instead of oracle java. It may be a little less streamlined, but it's functional. Ignore/cancel any pop ups that talk about updating java. If I missed this answer, I apologize as I receive the digests. Patti Clark Sr. Linux System Administrator Oak Ridge National Laboratory >>>>>>> Date: Thu, 14 Nov 2019 16:21:03 +0000 From: James Pearson <james-p(a)moving-picture.com> To: <centos(a)centos.org> Subject: Re: [CentOS] Firefox 68 jnlp files Message-ID: <1a787894-bbcb-799b-eba9-210c2a8ceaf9(a)moving-picture.com> Content-Type: text/plain; charset="UTF-8"; format=flowed isdtor wrote: > > It seems that firefox 68.x, as distributed with CentOS6 updates, no longer allows opening jnlp files with javaws > > The "Choose Helper Application" window popping up after selecting "Open with/Other" has a predefined list of applications that cannot be customised. > > I'm sure it must be a configuration issue as this works fine with the same browser on other distributions, but what to look for? > > # alternatives --display javaws > javaws - status is auto. > link currently points to /usr/java/latest/jre/bin/javaws > /usr/java/latest/jre/bin/javaws - priority 200000 > Current `best' version is /usr/java/latest/jre/bin/javaws. > # ll -L /etc/alternatives/javaws > -rwxr-xr-x 1 root root 140296 Dec 15 2018 /etc/alternatives/javaws > # Don't know about CentOS6, but with CentOS7, the selection of apps that you can use appear to map to '.desktop' files? If it is the same on CentOS6, then you might be able to set up a suitable .desktop file (e.g. in /usr/share/applications/ or similar) to do what you want ... No idea if this is of any help James Pearson

1 0

40_custom be the default option
by Jerry Geis 18 Nov '19

18 Nov '19

Hi All - I have my 40_custom file setup. What is a good way to make that the default boot option ? I'd rather not count menu option lines and change GRUB_DEFAULT to that - as I am doing this remote. Thanks Jerry

1 1

Re: [CentOS] Cron - log when job ends?
by John Horne 18 Nov '19

18 Nov '19

On Fri, 2019-11-15 at 16:32 -0500, Karl Vogel wrote: > > > On Fri, Nov 15, 2019 at 05:54:07PM +0000, John Horne wrote: > > J> In trying to resolve a problem with a cron job, we can see when the job > J> starts by looking in the /var/log/cron log file. However, I was asked if > J> when the job ends could also be logged. (It seems to be something that > J> crops up every so often over the years.) > > You could use something like this with your scripts. > It works with ksh or bash. > Sorry, I should have been more clear. I'm not looking for a 'per-script' solution. Logging when a job starts is performed by crond, so logging when it ends should also be done by crond. Despite the article I mentioned being from 2011, it seems that Debian 10 still supports the logging of when cron jobs end. Looking into this further it seems that Debian uses anacron, and then applies a patch which provides the '-L' option. I have raised this with the cronie project on github to try and see why this feature has not been implemented. (It may well be that there are good reasons for it having not happened.) A very quick look at the cronie code seems to indicate it may be possible to implement. John. -- John Horne | Senior Operations Analyst | Technology and Information Services University of Plymouth | Drake Circus | Plymouth | Devon | PL4 8AA | UK ________________________________ [http://www.plymouth.ac.uk/images/email_footer.gif]<http://www.plymouth.ac.uk/worldclass> This email and any files with it are confidential and intended solely for the use of the recipient to whom it is addressed. If you are not the intended recipient then copying, distribution or other use of the information contained is strictly prohibited and you should not rely on it. If you have received this email in error please let the sender know immediately and delete it from your system(s). Internet emails are not necessarily secure. While we take every care, University of Plymouth accepts no responsibility for viruses and it is your responsibility to scan emails and their attachments. University of Plymouth does not accept responsibility for any changes made after it was sent. Nothing in this email or its attachments constitutes an order for goods or services unless accompanied by an official order form.

2 1

C6 renew IPA CA (root) certificates
by Markus Hetzenecker 18 Nov '19

18 Nov '19

Hi all, I need to renew the self-signed CA (root) certificates of my CentOS 6 IPA installation (ipa-server-3.0.0-51.el6.centos.x86_64) after 8 years. In the documention i find only for "Renewing CA Certificates Issued by External CAs" , found in https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/ht… identity_management_guide/cas Thanks for any pointers, M.

1 0

Download Red Hat Enterprise Linux (RHEL) 8.1.0 (for development use)
by Turritopsis Dohrnii Teo En Ming 17 Nov '19

17 Nov '19

Good day from Singapore, You can download Red Hat Enterprise Linux (RHEL) 8.1.0 (for development use) from the following link. https://developers.redhat.com/products/rhel/download When will CentOS 8.1.0 become available? Thank you very much. -----BEGIN EMAIL SIGNATURE----- The Gospel for all Targeted Individuals (TIs): [The New York Times] Microwave Weapons Are Prime Suspect in Ills of U.S. Embassy Workers Link: https://www.nytimes.com/2018/09/01/science/sonic-attack-cuba-microwave.html ******************************************************************************************** Singaporean Mr. Turritopsis Dohrnii Teo En Ming's Academic Qualifications as at 14 Feb 2019 and refugee seeking attempts at the United Nations Refugee Agency Bangkok (21 Mar 2017) and in Taiwan (5 Aug 2019): [1] https://tdtemcerts.wordpress.com/ [2] https://tdtemcerts.blogspot.sg/ [3] https://www.scribd.com/user/270125049/Teo-En-Ming -----END EMAIL SIGNATURE-----

2 2

Place to run script command for all user/sessions
by Erick Perez - Quadrian Enterprises 16 Nov '19

16 Nov '19

Hi all, I would like to record user commands in terminal mode for remote supporters. I currently do that with the command "script - make typescript of terminal session". So far so good as long as I run a combo os screen/script at the command prompt, allow remote worker to control screen session and then at the end I do ctrl-d to save the script session. This however do not work (or at least is not practical) when I want to allow someone to login via SSH directly and unattended. What will be the place to insert "script" in order to call it for each login/logoff and sudo executions? As an alternative for my fellow coworkers I have setup a Windows 10 PC with putty and Teamviewer/AnyDesk on it. Remote supporters go into the Teamviewer/AnyDesk pc and then SSH using putty into the specified Linux box. Putty is setup as to record the entire session automatically. Linux boxes dont have GUI. Linux Boxes are Centos 7 x64 and only 3 are Centos 8 x64. Thanks for your comments. -- --------------------- Erick Perez ---------------------

1 0

Cron - log when job ends?
by John Horne 16 Nov '19

16 Nov '19

Hello, In trying to resolve a problem with a cron job, we can see when the job starts by looking in the /var/log/cron log file. However, I was asked if when the job ends could also be logged. (It seems to be something that crops up every so often over the years.) I found on the 'net this article https://serverfault.com/questions/248915/crontab-is-there-any-log-with-begi… which mentions a loglevel (-L) option, and by setting this to 2 it will log when a cron job ends. It sounds great, and just what we could use. The downside is that there seems to be no such option anymore. The article is several years old but the users says they are using anacron. Checking on both a CentOS 7 and Fedora 31 system, which both use cronie-anacron, I could find no mention of any loglevel. Does anyone know what happened to this option (why it was removed)? It would seem to be useful, but removed at some time. Thanks, John. -- John Horne | Senior Operations Analyst | Technology and Information Services University of Plymouth | Drake Circus | Plymouth | Devon | PL4 8AA | UK ________________________________ [http://www.plymouth.ac.uk/images/email_footer.gif]<http://www.plymouth.ac.uk/worldclass> This email and any files with it are confidential and intended solely for the use of the recipient to whom it is addressed. If you are not the intended recipient then copying, distribution or other use of the information contained is strictly prohibited and you should not rely on it. If you have received this email in error please let the sender know immediately and delete it from your system(s). Internet emails are not necessarily secure. While we take every care, University of Plymouth accepts no responsibility for viruses and it is your responsibility to scan emails and their attachments. University of Plymouth does not accept responsibility for any changes made after it was sent. Nothing in this email or its attachments constitutes an order for goods or services unless accompanied by an official order form.

2 1

C8 Questions
by Alessandro Baggi 16 Nov '19

16 Nov '19

Hi all, I've several questions about C8. I'm using 8 on my personal NAS and works very well. I'm running several VMs with centos 8 and noticed something: 1) Why corosync, pacemaker and pcs are missing on C8? They are only available on rhel with payments( rhel ha addons)? 2) Why there is only Gnome as available DE? I use centos on my workstation and I'm a kde-plasma user. XFCE is ok but not gnome. I tried fedora, it has all software that I need and it is a very good distro but I don't like too much update and its EOL (upgrade/reinstall every 13 months on a workstation is not so good for me). I don't want to be forced to install another stable distro like debian (This not means that debian is bad but I prefer centos). 3) I have a VM with C8 installed. I got several updates but I don't receive any update for 8 on centos-announce like for previous versions (6 & 7). Something has changed? 4) EPEL. I know that EPEL is a Fedora SIG but I use several packages from EPEL. There is a place to see what packages will be included in EPEL? For example, I tried to install audacious from epel but got errors for missing deps. Seems that EPEL8 is released but not ready. There is a ETA for this? 5) It's my impression or there are less packages in this release? 6) Why cockpit installed by default? 7) Why repo PowerTools was created? What is the main purpose? 8) Why NetworkManager is the default method to configure interfaces? I know that I can install network-scripts but I don't understand this change. Best regards, Alessandro.

6 10

how to know when a system is compromised
by Christopher Wensink 15 Nov '19

15 Nov '19

How do you know when a Linux system has been compromised? Every day I watch our systems with all the typical tools, ps, top, who, I watch firewall / IPS logs, I have logwatch setup and mailing daily summaries to me and I dive deeper into logs if something looks suspicious. What am I missing or not looking at that you security gurus are looking at? I subscribe to the centos and SANS newsletters, and I try to keep current on all technology with credible sources of articles online and with the Lynda library. What other sources of information do you use to stay current about the latest threats and technology updates? I appreciate the feedback. Chris

6 8

qemu-kvm-common-ev-2.12.0-33.1 and libvirt spits - error : virNetDevSendEthtoolIoctl:3078 : ethtool ioctl error: No such device
by lejeczek 15 Nov '19

15 Nov '19

hi guys I wonder if any of you also started to get: error : virNetDevSendEthtoolIoctl:3078 : ethtool ioctl error: No such device in libvirtd logs after qemu-kvm-ev upgrade? many thanks, L.

1 0

CentOS-announce Digest, Vol 177, Issue 4
by centos-announce-request＠centos.org 15 Nov '19

15 Nov '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2019:3846 CentOS 7 microcode_ctl Enhancement Update (Johnny Hughes) 2. CESA-2019:3834 Important CentOS 7 kernel Security Update (Johnny Hughes) 3. CESA-2019:3872 Important CentOS 7 kernel Security Update (Johnny Hughes) 4. CESA-2019:3878 Important CentOS 6 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 14 Nov 2019 19:40:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:3846 CentOS 7 microcode_ctl Enhancement Update Message-ID: <20191114194017.GA31463(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:3846 Upstream details at : https://access.redhat.com/errata/RHEA-2019:3846 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: fd283c8c831e3034656b6d36578d5f029c846e093d8813c01b7abef8a797716b microcode_ctl-2.1-53.3.el7_7.x86_64.rpm Source: 95ebb6cb3e95c4b709d81711632e7d1aee32ee739208ce597d0325c5ee7d53b2 microcode_ctl-2.1-53.3.el7_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 14 Nov 2019 19:41:10 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3834 Important CentOS 7 kernel Security Update Message-ID: <20191114194108.GA31667(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3834 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3834 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 10d30db40cd2cedd8bb0b01566dbe4176d51dddd947e863f96f665fdf6118eb8 bpftool-3.10.0-1062.4.2.el7.x86_64.rpm 00376efddaa740551db62578da3993b114d97b50d0caf6b196871549edc8eef4 kernel-3.10.0-1062.4.2.el7.x86_64.rpm bcbb823c93a43bd9bad3ba5ec69be62e6256db5826763ad10792f46c94156b85 kernel-abi-whitelists-3.10.0-1062.4.2.el7.noarch.rpm d5f43dae95c8a3884636686e1cdc5d0ea47d1c733cc9f5af5513d1fe413e5463 kernel-debug-3.10.0-1062.4.2.el7.x86_64.rpm 9132dc11ed190261e7c3b56b3086207eef80c54869a6e3fcb0a26abf42240d15 kernel-debug-devel-3.10.0-1062.4.2.el7.x86_64.rpm 3b933c975fa3c0c930b57af1e4794195c1e0b18e92eeadf72acfb188ddc46365 kernel-devel-3.10.0-1062.4.2.el7.x86_64.rpm f6f4054556d9e4bdb75daea65960103f62cd5e08a0099ea38a19cbc58a332fbb kernel-doc-3.10.0-1062.4.2.el7.noarch.rpm 387b670d0e17f42557ef8c61db8bdbb6e6177134872f00226d9892b7dea0e958 kernel-headers-3.10.0-1062.4.2.el7.x86_64.rpm 5834b0d596dc84597c7223252cf97d8a7daca206d8a8cb8ef96a2737d12b385e kernel-tools-3.10.0-1062.4.2.el7.x86_64.rpm 3ee52d0a17b875ea1c458820af4ac75f15970e2f7a3474896d0e4117e091af5a kernel-tools-libs-3.10.0-1062.4.2.el7.x86_64.rpm 12dc9eb434edd88a36465c5eaef885964be5e6cd31248f1f19894cf24bd8604c kernel-tools-libs-devel-3.10.0-1062.4.2.el7.x86_64.rpm 0bf73bba89fd9d747f551b72cf5319db9bb880bff811966838667dc391d6dfe1 perf-3.10.0-1062.4.2.el7.x86_64.rpm 550b7ce55dafe398a8b09160a413f3274f8a3518c12e741d7983f37b53e5740e python-perf-3.10.0-1062.4.2.el7.x86_64.rpm Source: d92ca6f95e26fdf1cd61277bb6ea633cf2378be309d5a0e0b61abc2a4ae713f6 kernel-3.10.0-1062.4.2.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Thu, 14 Nov 2019 19:43:02 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3872 Important CentOS 7 kernel Security Update Message-ID: <20191114194302.GA31890(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3872 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3872 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0dd106b71b5e9b4f794ed7d572d48c1c60cf26607c02e0088925da35804a9346 bpftool-3.10.0-1062.4.3.el7.x86_64.rpm 6b4179029161d853db5bfbf8665f796a2dfbd53d39baaf95f855fc6be700d242 kernel-3.10.0-1062.4.3.el7.x86_64.rpm 5e4f94a348ac1d88729f140a920df5e034b915e9c9d0c70638a3560418c268bf kernel-abi-whitelists-3.10.0-1062.4.3.el7.noarch.rpm 7f055f9fd7169cf3822ce2115d2b75c8e0aaf35f285cba0d6a8015e597e01108 kernel-debug-3.10.0-1062.4.3.el7.x86_64.rpm b2f78c36c4413e06a9131f91759175335ad66abc894b842850c01bcfe7812a4f kernel-debug-devel-3.10.0-1062.4.3.el7.x86_64.rpm 81c9220caacf8051fc23737be40088af2927ec5df67c791557a505bcf705d7d3 kernel-devel-3.10.0-1062.4.3.el7.x86_64.rpm 927088c887b88a4f89269e08b3e584501172807d17ddca35c87069960360bea7 kernel-doc-3.10.0-1062.4.3.el7.noarch.rpm c906be5d39f8d72dade2760124c1cba294100bc8408f16c8a16b8de0aa05a579 kernel-headers-3.10.0-1062.4.3.el7.x86_64.rpm 6e12cbd04a2c8a297aef260ba461e0b18cb3759a00f88ff30150dee807fdbcff kernel-tools-3.10.0-1062.4.3.el7.x86_64.rpm 492d5f8c8b908b2e17fbfdb4a37de4dd633a0d90f7e24db644982ae904ddc11d kernel-tools-libs-3.10.0-1062.4.3.el7.x86_64.rpm 7b2cdcaf30855571d3a5fd6befda6b24cdfb82d3eeeb6bbd8337424b5cd7dd4a kernel-tools-libs-devel-3.10.0-1062.4.3.el7.x86_64.rpm e068b8ee1be604e322393bb22ac21d02c854ccac25614aca6a75949f9ff7bd68 perf-3.10.0-1062.4.3.el7.x86_64.rpm 13bd3a04da28e34516c871d505eda3baf1eb7a1a73a79657708482dbed9290f2 python-perf-3.10.0-1062.4.3.el7.x86_64.rpm Source: cc13667d043ffb89b07003a4b92e1a4d09682d6b2e79c599825f58ce2f23ca86 kernel-3.10.0-1062.4.3.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Thu, 14 Nov 2019 21:12:04 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3878 Important CentOS 6 kernel Security Update Message-ID: <20191114211204.GA2193(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3878 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3878 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 74e382987c88e8129c67e241213f60b77d8ef651bffade866c37f68ad12ffd46 kernel-2.6.32-754.24.3.el6.i686.rpm 1632e36a238aa63d379af94ddb6263361298ff79a3023447cd22779f314915e7 kernel-abi-whitelists-2.6.32-754.24.3.el6.noarch.rpm 4761e34361832785e82abb0ecbb7eb7b16fa082e873ade80dd99644eb12e7319 kernel-debug-2.6.32-754.24.3.el6.i686.rpm 52eec2db126d0783ed1dbff26eabbcf4d9ebde751672fda3660fc2b5ea2c279e kernel-debug-devel-2.6.32-754.24.3.el6.i686.rpm 03f5b1f0741eba1c8018114f6a16cf6d686ee6247ba09c167431a6cb883f87a1 kernel-devel-2.6.32-754.24.3.el6.i686.rpm 6a3fcfd8a7de433e57095c3bcc820d7227fde746c471efdb6efc5e63573fa53c kernel-doc-2.6.32-754.24.3.el6.noarch.rpm 90e5047bb0e95a9e86e3eeabb0de86e1e851de9d201aeb1d24fc094756c2f815 kernel-firmware-2.6.32-754.24.3.el6.noarch.rpm a2525e2f97df0466359483a86eb66890c5739bc3c78d989ef0ef22c7ef8f01b9 kernel-headers-2.6.32-754.24.3.el6.i686.rpm 09c194b7f12d840ff96cd391d0cdec9c4cd19073293a895e84daf5526fb7c222 perf-2.6.32-754.24.3.el6.i686.rpm 6c07228762e532fb6dc211854e7f860066032fac1ae543592ffc2a996e5417c0 python-perf-2.6.32-754.24.3.el6.i686.rpm x86_64: 830236afd11151e20473632958d521f9e67cd1ea47cc6011b33b8ce007a28d4b kernel-2.6.32-754.24.3.el6.x86_64.rpm 1632e36a238aa63d379af94ddb6263361298ff79a3023447cd22779f314915e7 kernel-abi-whitelists-2.6.32-754.24.3.el6.noarch.rpm fa8109821996aa378bed50a418c8da91face33eb32490ce6700a307f6e915671 kernel-debug-2.6.32-754.24.3.el6.x86_64.rpm 52eec2db126d0783ed1dbff26eabbcf4d9ebde751672fda3660fc2b5ea2c279e kernel-debug-devel-2.6.32-754.24.3.el6.i686.rpm 84059678373e5910d689b9aee558ab9e94141f95366f6ecef8335f1768caba82 kernel-debug-devel-2.6.32-754.24.3.el6.x86_64.rpm 794e2d138af774f85212508aac7e3957ce4afe9646603b5d367352adfed591d4 kernel-devel-2.6.32-754.24.3.el6.x86_64.rpm 6a3fcfd8a7de433e57095c3bcc820d7227fde746c471efdb6efc5e63573fa53c kernel-doc-2.6.32-754.24.3.el6.noarch.rpm 90e5047bb0e95a9e86e3eeabb0de86e1e851de9d201aeb1d24fc094756c2f815 kernel-firmware-2.6.32-754.24.3.el6.noarch.rpm fbef28c9c1fc63c194d6e88f9d750de1f6627926415cd4101181bd98424a57a6 kernel-headers-2.6.32-754.24.3.el6.x86_64.rpm cfadce47bb963fe51366b9602ca15d969edffde08c194941cfb47f7359d89ee2 perf-2.6.32-754.24.3.el6.x86_64.rpm 037e1912b41a3a6260d01c77b4d83d66807c3897f7ab0269eabb1d28cc50d6e3 python-perf-2.6.32-754.24.3.el6.x86_64.rpm Source: 2196dc7c22e7b95ad1481d8d24ff7f61df6990303b1e6a6cbe13b84f62b9b452 kernel-2.6.32-754.24.3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 177, Issue 4 ***********************************************

1 0

Centos 7 + samba / some win 10 systems can mount and some not
by Ralf Prengel 15 Nov '19

15 Nov '19

Hallo, We are using centos 7 and samba in combination with Win10 1903. The problem: Some systems are able to map a share and some can t. Any ideas and hints? Thanks Ralf

6 7

About license at redistribution
by sensor make 14 Nov '19

14 Nov '19

Hello. I'd like to ask about license issue. Now I'm planning to make and sell some measurement system controlled by PC. There is no technical issue but I don't have enough information about license. I will do the following, 1) Install CentOS and my applications on the PC. 2) Sell the PC as a measurement device. 3) Distribute DVD made from CentOS iso image file to the user if he/she needs. Question 1. Is there no problem from the view point of CentOS license ? Question 2. Should I donate to CentOS community ? Best Regards.

2 2

Firefox 68 jnlp files
by isdtor 14 Nov '19

14 Nov '19

It seems that firefox 68.x, as distributed with CentOS6 updates, no longer allows opening jnlp files with javaws The "Choose Helper Application" window popping up after selecting "Open with/Other" has a predefined list of applications that cannot be customised. I'm sure it must be a configuration issue as this works fine with the same browser on other distributions, but what to look for? # alternatives --display javaws javaws - status is auto. link currently points to /usr/java/latest/jre/bin/javaws /usr/java/latest/jre/bin/javaws - priority 200000 Current `best' version is /usr/java/latest/jre/bin/javaws. # ll -L /etc/alternatives/javaws -rwxr-xr-x 1 root root 140296 Dec 15 2018 /etc/alternatives/javaws #

3 4

unintall Kannel
by Godwin Adade 14 Nov '19

14 Nov '19

how do i uninstall the gateway completely? *Godwin Adade* Service Delivery Analyst [image: Picture] Cell: +233546318611 *Excellence, Integrity, Reliability*

2 1

CentOS-announce Digest, Vol 177, Issue 3
by centos-announce-request＠centos.org 14 Nov '19

14 Nov '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2019:3847 CentOS 6 microcode_ctl Enhancement Update (Johnny Hughes) 2. CEBA-2019:3855 CentOS 6 cluster BugFix Update (Johnny Hughes) 3. CEBA-2019:3859 CentOS 6 adcli BugFix Update (Johnny Hughes) 4. CESA-2019:3755 Important CentOS 6 sudo Security Update (Johnny Hughes) 5. CEBA-2019:3858 CentOS 6 samba BugFix Update (Johnny Hughes) 6. CESA-2019:3836 Important CentOS 6 kernel Security Update (Johnny Hughes) 7. CEBA-2019:3857 CentOS 6 sos BugFix Update (Johnny Hughes) 8. CESA-2019:3756 Important CentOS 6 thunderbird Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 14 Nov 2019 01:16:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:3847 CentOS 6 microcode_ctl Enhancement Update Message-ID: <20191114011644.GA25961(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:3847 Upstream details at : https://access.redhat.com/errata/RHEA-2019:3847 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b5d190ce4935b47b5c4fbc414b31113a3b7d24ee0d1d1218b4c9de4f668a96db microcode_ctl-1.17-33.19.el6_10.i686.rpm x86_64: 8c9172dfd84c363fa01cd43796a25a879f9abce568bb9de84d200b4f3c930cc8 microcode_ctl-1.17-33.19.el6_10.x86_64.rpm Source: 2907a7c6074f79bcb193913b611ed4a7b3dda9987e601682ba070fa5c83b4c51 microcode_ctl-1.17-33.19.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 14 Nov 2019 01:17:07 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:3855 CentOS 6 cluster BugFix Update Message-ID: <20191114011707.GA26135(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:3855 Upstream details at : https://access.redhat.com/errata/RHBA-2019:3855 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a84580725fadd504c74fc80df77ee92d1aee50d7a159b91813738d2100f5a8d2 clusterlib-3.0.12.1-84.el6_10.1.i686.rpm 1f5d9dfae0c2f14936ed334103c6278e0742d9f5e9ebec212bf00a26b711be95 clusterlib-devel-3.0.12.1-84.el6_10.1.i686.rpm 912390b35e11e993060c2b09f05fe6d57281d163403623a676eda2f5217cd70b cman-3.0.12.1-84.el6_10.1.i686.rpm c34451e85ff2e477afea55f0478ff79d4ddc375c77f1dfae3ef1ef80214776d1 gfs2-utils-3.0.12.1-84.el6_10.1.i686.rpm x86_64: a84580725fadd504c74fc80df77ee92d1aee50d7a159b91813738d2100f5a8d2 clusterlib-3.0.12.1-84.el6_10.1.i686.rpm e38ac08cc7be7ce516411b8f273ab7600829fc4749b9a3bf7fab68bc230bc8bf clusterlib-3.0.12.1-84.el6_10.1.x86_64.rpm 1f5d9dfae0c2f14936ed334103c6278e0742d9f5e9ebec212bf00a26b711be95 clusterlib-devel-3.0.12.1-84.el6_10.1.i686.rpm dd151045f89b889ce536c43a6e8fe54e384123c3ecccdd7868b00edeab087f83 clusterlib-devel-3.0.12.1-84.el6_10.1.x86_64.rpm 5cdfe12c575dda21609013986adb3eea37871fc97536925ec7a9a3181af415d6 cman-3.0.12.1-84.el6_10.1.x86_64.rpm d2673dba1f6d8bd9bc6ee22c70e93c1e11e6d3498f1fa501daeab262dc765263 gfs2-utils-3.0.12.1-84.el6_10.1.x86_64.rpm Source: 80443dc911fa99b57b5690bc75cc8098a5692aae70eeb6e6b2eba1169ffb88fc cluster-3.0.12.1-84.el6_10.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Thu, 14 Nov 2019 01:17:17 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:3859 CentOS 6 adcli BugFix Update Message-ID: <20191114011717.GA26281(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:3859 Upstream details at : https://access.redhat.com/errata/RHBA-2019:3859 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d733f4d93d9d24190d9e2a31cb408014de312651814d58bd1ecd072af7726fb7 adcli-0.8.1-3.el6_10.i686.rpm x86_64: 523b2744f8f6117fc7d8ffe06c98c757080114130470e40711b266cebe1f83f7 adcli-0.8.1-3.el6_10.x86_64.rpm Source: dabbf8ea7c5793c0f9dc5597ce77f87678c7a9935c8af220a7afcfa74654c103 adcli-0.8.1-3.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Thu, 14 Nov 2019 01:17:32 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3755 Important CentOS 6 sudo Security Update Message-ID: <20191114011732.GA26416(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3755 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3755 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 20c6fb9ca4864211808289759d4e0b6145c3bed95466a142e7b1fc4cf00383a8 sudo-1.8.6p3-29.el6_10.2.i686.rpm 1a1c7a626fb2954348ca1500d3b37e9af05895ee153f41fa1bf9251d937465d3 sudo-devel-1.8.6p3-29.el6_10.2.i686.rpm x86_64: 5b2ac51d5c8cb3ada62d1c08466dd9ff380eb555b08c809321c25fafd545299c sudo-1.8.6p3-29.el6_10.2.x86_64.rpm 1a1c7a626fb2954348ca1500d3b37e9af05895ee153f41fa1bf9251d937465d3 sudo-devel-1.8.6p3-29.el6_10.2.i686.rpm eb46ebc4a63f62d0ce33935f76a011aefdd2ebf5404271931f34af2b73b169e9 sudo-devel-1.8.6p3-29.el6_10.2.x86_64.rpm Source: 959442a22f72ec7e1c6a5e0d5ab34b24dccae0e1558b895c1a152970c39a0ee9 sudo-1.8.6p3-29.el6_10.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Thu, 14 Nov 2019 01:18:37 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:3858 CentOS 6 samba BugFix Update Message-ID: <20191114011837.GA26787(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:3858 Upstream details at : https://access.redhat.com/errata/RHBA-2019:3858 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7acf078d0b74c36f218c8e2c88761fd59ee7314f65541c009fb1b49f2b3f85a4 libsmbclient-3.6.23-53.el6_10.i686.rpm 236bfc8b6445a294100b4099c2af29872513c66f75ffcea5dba319ea742034b6 libsmbclient-devel-3.6.23-53.el6_10.i686.rpm d2be129049ab06fef8583ba84dad8f4505b6706e3373561228be04512752d034 samba-3.6.23-53.el6_10.i686.rpm 61be0f112321793a50c2d8d17e2a366327609a88b51ea8e50a6c4e5f52c0ce2f samba-client-3.6.23-53.el6_10.i686.rpm 788ab206ccf1345de8b1378c3fb1d6c6471b69de76ccaed66d64eb3f105e2679 samba-common-3.6.23-53.el6_10.i686.rpm f4c99a759dfcd7977af86febeea045922193280a836c91b378db3ae067975cc8 samba-doc-3.6.23-53.el6_10.i686.rpm 46f27e65d468f09b000acb72edbfac2f863491236fc99ceeccc3710d06cc0b00 samba-domainjoin-gui-3.6.23-53.el6_10.i686.rpm c772f54e8c9445711f7393e93dfad99854cd7195feb9cd59aea6fd6454f5d3d6 samba-swat-3.6.23-53.el6_10.i686.rpm 947bb0c56bb8895e1fd7c153c946d31feb7375d5c9ef842b81f29f0ffc1f4150 samba-winbind-3.6.23-53.el6_10.i686.rpm 5d2ce9dace53afee451af9584f3758e36371961e4cc3004798ae82e0ffc03ca3 samba-winbind-clients-3.6.23-53.el6_10.i686.rpm 260d9d181253e77ae5bb3387cde246ef948beef960714e33f301b3fb7a549878 samba-winbind-devel-3.6.23-53.el6_10.i686.rpm b762e0019a1a35879ad1217e8e9813522396d27c610b7914b3a558d8c4b48d96 samba-winbind-krb5-locator-3.6.23-53.el6_10.i686.rpm x86_64: 7acf078d0b74c36f218c8e2c88761fd59ee7314f65541c009fb1b49f2b3f85a4 libsmbclient-3.6.23-53.el6_10.i686.rpm ee415d274f01867b42097762283df46e1c0b04f9ee06037062984d56c4de93a0 libsmbclient-3.6.23-53.el6_10.x86_64.rpm 236bfc8b6445a294100b4099c2af29872513c66f75ffcea5dba319ea742034b6 libsmbclient-devel-3.6.23-53.el6_10.i686.rpm 1956746d708497f60f29ee55515ab26423a8693c45fb1129afb8f44ba2c4828a libsmbclient-devel-3.6.23-53.el6_10.x86_64.rpm 8b7b4ba43d5db200b9f79bb22dc39a5fd117e573dbc0b72d37ab1c786208d97a samba-3.6.23-53.el6_10.x86_64.rpm c6ef9b3670144ffc6b1e10943c354384da5a1957f1c9b3258ef52de3d3ea954f samba-client-3.6.23-53.el6_10.x86_64.rpm 788ab206ccf1345de8b1378c3fb1d6c6471b69de76ccaed66d64eb3f105e2679 samba-common-3.6.23-53.el6_10.i686.rpm 59350f978650357650be8b89e7acc993731e271f7c00e54f7f45482e8dc99864 samba-common-3.6.23-53.el6_10.x86_64.rpm a9a2a5344fd50f50ef32436abb39711b0bbab745b13c346b724b43818b52677a samba-doc-3.6.23-53.el6_10.x86_64.rpm 843ab8c6a9179a87cc172fc0f5864708675a785e44ee581b829c109d2b4961b2 samba-domainjoin-gui-3.6.23-53.el6_10.x86_64.rpm 28fd6e187501321cfad67c451dbca6bab1b798789ceea8d629f03d711a27a992 samba-glusterfs-3.6.23-53.el6_10.x86_64.rpm 99d2e16d9fdba432b8583b7c329d77978c2cd09d6ea069997f5da1335a3007e5 samba-swat-3.6.23-53.el6_10.x86_64.rpm 85fae2c93e9986963d51a4a6445c46ee0c5b0a60d40e361eeac4c0aefdfd2616 samba-winbind-3.6.23-53.el6_10.x86_64.rpm 5d2ce9dace53afee451af9584f3758e36371961e4cc3004798ae82e0ffc03ca3 samba-winbind-clients-3.6.23-53.el6_10.i686.rpm 94985a8ec2e2d8a7c5be07622126c8d6d6b469cbe6977d514eca498a0b361f11 samba-winbind-clients-3.6.23-53.el6_10.x86_64.rpm 260d9d181253e77ae5bb3387cde246ef948beef960714e33f301b3fb7a549878 samba-winbind-devel-3.6.23-53.el6_10.i686.rpm 501419f99c321598c49c6b683d80307e6b31af68ee77c492297d762d6966fc05 samba-winbind-devel-3.6.23-53.el6_10.x86_64.rpm 5f5b0b69bd59aec9548da4f2940be134b9e08b67ad8f5e182d1d4fb972918b08 samba-winbind-krb5-locator-3.6.23-53.el6_10.x86_64.rpm Source: 72015cb4db66d57aa0dcce16397ae750004f8c0409ae14c127e6a68b9c22f7ba samba-3.6.23-53.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Thu, 14 Nov 2019 01:19:32 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3836 Important CentOS 6 kernel Security Update Message-ID: <20191114011932.GA27071(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3836 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3836 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1695e5c3a87dfcc86efe269f74ac18c0be6d81bf72497bd6bde232a306ccb17a kernel-2.6.32-754.24.2.el6.i686.rpm 5d2b9b6bd2d9c2b56ceb52f865895e946ee568f4ef1e0aa0b01001b4a6f4091e kernel-abi-whitelists-2.6.32-754.24.2.el6.noarch.rpm db0655aa8f7adbba26847da9a57895fd6982b825cef6359084b3f85ab94e574d kernel-debug-2.6.32-754.24.2.el6.i686.rpm 9e4ec99ab064211667eddf36fe1e578e956c34e48f0acd9d05f4f0f10db9b4b7 kernel-debug-devel-2.6.32-754.24.2.el6.i686.rpm 29a60c464a37d214a2ee7fb2a41ced10cae7e94871eb650b1c1675d480a99eba kernel-devel-2.6.32-754.24.2.el6.i686.rpm 739f81393909a05e02e917b015480e4a76c250fdfb788543c9614d51f0cd0d8b kernel-doc-2.6.32-754.24.2.el6.noarch.rpm 372ad7fb24cfc66431bded11803ea770eb0d26e220f3859bb184667f7d0c9300 kernel-firmware-2.6.32-754.24.2.el6.noarch.rpm 611e40598c9e92807410f5e5dfba63449a9ff036b6aa014e8007c831d101295c kernel-headers-2.6.32-754.24.2.el6.i686.rpm 6ba97092a741f13ca81fbb5804442957656e648640a5397a8b8cb27458618bf1 perf-2.6.32-754.24.2.el6.i686.rpm e97fd17680d888b107c6d25292f80cea9ed73ef3eb20f9d81d24948af757bcbf python-perf-2.6.32-754.24.2.el6.i686.rpm x86_64: b54559bbba31ad142645fa0255cc4337c48f9d4ba47f488745063bfd753eb434 kernel-2.6.32-754.24.2.el6.x86_64.rpm 5d2b9b6bd2d9c2b56ceb52f865895e946ee568f4ef1e0aa0b01001b4a6f4091e kernel-abi-whitelists-2.6.32-754.24.2.el6.noarch.rpm 90f1e5c0b87dcd85eef6143d1bb2a4caf4f68aeb3aff5e8c021f88eecd7eb8d9 kernel-debug-2.6.32-754.24.2.el6.x86_64.rpm 9e4ec99ab064211667eddf36fe1e578e956c34e48f0acd9d05f4f0f10db9b4b7 kernel-debug-devel-2.6.32-754.24.2.el6.i686.rpm 630f3d39c223d6251761cb58087dd43b65676e058c78f2b24d2a539c9dac58f5 kernel-debug-devel-2.6.32-754.24.2.el6.x86_64.rpm c85db9e8cd9dcdcf554925b1242dfac00ec92806c324a2848c955a2b709c2eb9 kernel-devel-2.6.32-754.24.2.el6.x86_64.rpm 739f81393909a05e02e917b015480e4a76c250fdfb788543c9614d51f0cd0d8b kernel-doc-2.6.32-754.24.2.el6.noarch.rpm 372ad7fb24cfc66431bded11803ea770eb0d26e220f3859bb184667f7d0c9300 kernel-firmware-2.6.32-754.24.2.el6.noarch.rpm bad78d4820bebcf6be91e6db0583fdc7f038024a8133caac3d63affad6ec4325 kernel-headers-2.6.32-754.24.2.el6.x86_64.rpm 897e0ec0837c93eef287316a23dd28d4f9aeec094efcf842a700a954de696bef perf-2.6.32-754.24.2.el6.x86_64.rpm f3a6581610267077abd01052481b6b0d2a5b59be4fd9ff3c89df9badb15378df python-perf-2.6.32-754.24.2.el6.x86_64.rpm Source: 190462977503cc2a5f9439eab33c1e3fe8815782662be5209295ed274175d6ab kernel-2.6.32-754.24.2.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Thu, 14 Nov 2019 01:19:43 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2019:3857 CentOS 6 sos BugFix Update Message-ID: <20191114011943.GA27202(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2019:3857 Upstream details at : https://access.redhat.com/errata/RHBA-2019:3857 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3aca61bc4861f2731df12638e0fe38e122ed34c8b262092c4c22ca7470f1ff2e sos-3.2-63.el6.centos.4.noarch.rpm x86_64: 3aca61bc4861f2731df12638e0fe38e122ed34c8b262092c4c22ca7470f1ff2e sos-3.2-63.el6.centos.4.noarch.rpm Source: de4ae1146e516337f9eadb635e358384c232d31c359659bf861746ed29bffcf8 sos-3.2-63.el6.centos.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 8 Date: Thu, 14 Nov 2019 01:20:42 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3756 Important CentOS 6 thunderbird Security Update Message-ID: <20191114012042.GA27350(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3756 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3756 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f195208ec80d673585ba407154a45b7b7db4537022ea334e3d03a68272d320f1 thunderbird-68.2.0-2.el6.centos.i686.rpm x86_64: f929b73af04bac1471a32ee9e26a06860d6a4d4522fd3b9a511b8a88f3bc2c06 thunderbird-68.2.0-2.el6.centos.x86_64.rpm Source: db28a837340f27c5595e37451c71d248d56110177d54fcd80f3aa7f272dc2dd6 thunderbird-68.2.0-2.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 177, Issue 3 ***********************************************

1 0

printer only prints one page, if anything
by Michael Hennebry 14 Nov '19

14 Nov '19

I've got a Brother HL-L2360D series printer connected to Centos 7. CUPS lists it as Generic PCL6/PCL Printer - CUPS+Gutenprint v5.2.9 . When I tell it to print a pdf file, it prints at most the first page. After powering the thing off and turning it on again, it printed page 3 of pages 3-6 . On trying it again, the thing claimed it was receiving data and printed page 3 of pages 3-6 again. I've tried to delete the printer so I could add it again, but CUPS won't let me. CUPS quit asking for a password, it just says Forbidden. How do I print the pdf file? How do I keep this from happening again? This is not the first time I've had to do a deep dive into CUPS or something to get printing done. I gave up on HP printers because I had to buy new cartridges practically every time I wanted to print. Only being able to print the first page, if anything, is not much of an improvement. My girlfriend has an HP printer that works, so I suppose they are not all like mine. -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "Sorry but your password must contain an uppercase letter, a number, a haiku, a gang sign, a heiroglyph, and the blood of a virgin." -- someeecards

8 23

Question: KVM Config C8
by Günther J. Niederwimmer 13 Nov '19

13 Nov '19

Hello, is the broken KVM installation (UEFI) with the updates fixed on C8? I have to update / install a new System, and don't like to find out I have a broken system again :-(. Thanks for a answer, -- mit freundlichen Grüßen / best regards Günther J. Niederwimmer

3 4

Virtualizing CentOS 8
by Steffan Cline 13 Nov '19

13 Nov '19

I posted to the forums but figured I’d try the list too. https://centos.org/forums/viewtopic.php?f=54&t=71934 Has anyone successfully created a PV VM of CentOS 8? HVM works but it’s seemingly slow. Thank you, Steffan Cline steffan.cline(a)gmail.com 602-793-0014

2 1

frr packages for CentOS 8
by Dan Irwin 13 Nov '19

13 Nov '19

Hello, I'm not seeing free range routing (frr) packages for CentOS 8. The RHEL8 docs say frr is the replacement for quagga. https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/ht… What am i missing? Cheers, Dan

3 3

Centos 8 server rebooting...
by Tom Bishop 13 Nov '19

13 Nov '19

Can someone provide some guidance with my server, I have a fairly new centos 8 server, pretty much just a KVM host but I have noticed that its dumping and rebooting at various times. Journalctl does not go back past the reboot so I am unable to catch what may be causing it, it appears to be KVM from /var/log/messages and it appears I should have a kernel dump file but I am unable to find it. I had these same kvm images running on the centos 7 server for over a year at a time, not sure what is making things less stable. Any help would be appreciated, thanks. Here is the output from /var/log/messages: Nov 12 16:28:53 f15ex kernel: traps: CPU 1/KVM[4080] general protection ip:55fa8cac0280 sp:7f71cc9c3398 error:0 in qemu-kvm[55fa8c662000+9b0000] Nov 12 16:28:54 f15ex systemd[1]: Created slice system-systemd\x2dcoredump.slice. Nov 12 16:28:54 f15ex systemd[1]: Started Process Core Dump (PID 23836/UID 0). Nov 12 16:28:54 f15ex systemd-coredump[23837]: Resource limits disable core dumping for process 4027 (qemu-kvm). Nov 12 16:28:54 f15ex systemd-coredump[23837]: Process 4027 (qemu-kvm) of user 107 dumped core. Nov 12 16:28:54 f15ex libvirtd[1205]: 2019-11-12 22:28:54.118+0000: 1205: info : libvirt version: 4.5.0, package: 24.3.module_el8.0.0+189+f9babebb (CentOS Bu ildsys <bugs(a)centos.org>, 2019-10-08-21:54:46, ) Nov 12 16:28:54 f15ex libvirtd[1205]: 2019-11-12 22:28:54.118+0000: 1205: info : hostname: f15ex Nov 12 16:28:54 f15ex libvirtd[1205]: 2019-11-12 22:28:54.118+0000: 1205: error : qemuMonitorIO:718 : internal error: End of file from qemu monitor Nov 12 16:28:54 f15ex avahi-daemon[1064]: Interface vnet2.IPv6 no longer relevant for mDNS. Nov 12 16:28:54 f15ex kernel: br99: port 3(vnet2) entered disabled state Nov 12 16:28:54 f15ex avahi-daemon[1064]: Leaving mDNS multicast group on interface vnet2.IPv6 with address fe80::fc54:ff:fe60:c47d. Nov 12 16:28:54 f15ex kernel: device vnet2 left promiscuous mode Nov 12 16:28:54 f15ex kernel: br99: port 3(vnet2) entered disabled state Nov 12 16:28:54 f15ex avahi-daemon[1064]: Withdrawing address record for fe80::fc54:ff:fe60:c47d on vnet2. Nov 12 16:28:54 f15ex NetworkManager[1186]: <info> [1573597734.1428] device (vnet2): state change: activated -> unmanaged (reason 'unmanaged', sys-iface-sta te: 'removed') Nov 12 16:28:54 f15ex NetworkManager[1186]: <info> [1573597734.1431] device (br99): bridge port vnet2 was detached Nov 12 16:28:54 f15ex NetworkManager[1186]: <info> [1573597734.1431] device (vnet2): released from master device br99 Nov 12 16:28:54 f15ex dbus-daemon[1057]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatch er.service' requested by ':1.13' (uid=0 pid=1186 comm="/usr/sbin/NetworkManager --no-daemon " label="system_u:system_r:NetworkManager_t:s0") Nov 12 16:28:54 f15ex systemd[1]: Starting Network Manager Script Dispatcher Service... Nov 12 16:28:54 f15ex dbus-daemon[1057]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Nov 12 16:28:54 f15ex systemd[1]: Started Network Manager Script Dispatcher Service. Nov 12 16:28:54 f15ex nm-dispatcher[23857]: req:1 'down' [vnet2]: new request (3 scripts) Nov 12 16:28:54 f15ex nm-dispatcher[23857]: req:1 'down' [vnet2]: start running ordered scripts... Nov 12 16:28:54 f15ex kvm[23865]: 2 guests now active Nov 12 16:28:54 f15ex systemd-machined[1061]: Machine qemu-3-OMV terminated. Nov 12 16:28:54 f15ex kernel: Warning: mpt3sas 0000:0a:00.0 [1000:0072] - Support for this device has been removed in this major release. Please check the re moved functionality section of the release notes.

1 0

cli Checking disk i/o
by Robert Moskowitz 11 Nov '19

11 Nov '19

I just built a CentOS7 system on a Zotac NANO PC. I used a 320GB 2.5" HD I had sitting around and installed with Standard Partitions on XFS. The drive is spinning, nonstop. How can I monitor if there is actually disk i/o to warrant this constant spinning. So noatime for all partitions work with XFS? I did some browsing and the claim is XFS uses realtime which is better? than noatime? Perhaps it is just occasional writes to messages (at least 1 a minute) that determines to keep on spinning. But it is annoying.

4 5

Mod_evasive for HTTPD24 (Software collections)
by Akshar Kanak 11 Nov '19

11 Nov '19

Hi Team I am planning to use mod_evasive to prevent dos attackS . I am using httpd24-httpd-2.4.34-7.el6.x86_64 (httpd software collections) on Centos 6.5 . Do we have mod_evasive rpm wrt to this httpd version ? Thanks and regards AKshar

1 0

samab touch file on share no permisson allthough file is written
by Ralf Prengel 11 Nov '19

11 Nov '19

Hallo, I ve a samba problem. I m using a samba server on centos 7. The share ist mounted by windows 7 and a centos client. Everything is working but touch filename on the share shows the message "no permission" allthough the file is written. Has anyone a hint for me? Ralf

1 0

Re: [CentOS] cli Checking disk i/o
by Robert Moskowitz 11 Nov '19

11 Nov '19

OK. That is interesting. I am assuming tps is transfers per sec? I would have to get a stop watch, but it seems to go a bit of time, and then a write. Is there something that would accumulate this and give me a summary over some period of time? Of course it better NOT be doing its own IOs... On 11/10/19 6:03 PM, shimi wrote: > iostat 1 > > On Mon, 11 Nov 2019, 00:11 Robert Moskowitz, <rgm(a)htt-consult.com > <mailto:rgm@htt-consult.com>> wrote: > > I just built a CentOS7 system on a Zotac NANO PC. > > I used a 320GB 2.5" HD I had sitting around and installed with > Standard > Partitions on XFS. > > The drive is spinning, nonstop. > > How can I monitor if there is actually disk i/o to warrant this > constant > spinning. > > So noatime for all partitions work with XFS? I did some browsing and > the claim is XFS uses realtime which is better? than noatime? > > Perhaps it is just occasional writes to messages (at least 1 a > minute) > that determines to keep on spinning. > > But it is annoying. > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org <mailto:CentOS@centos.org> > https://lists.centos.org/mailman/listinfo/centos >

2 2

Intel Wireless 3160 adapter misbehaving
by Patrick DERWAEL 10 Nov '19

10 Nov '19

Hi folks I'm having some hard time troubleshooting a Wifi issue Centos7, fully up to date, with an Intel Dual Band 3160 Wireless adapter After the machine boots, the Wifi connects and runs ok for a few hours After this, the Wifi just stops [root@orbex ~]# lspci -v | grep Wireless 04:00.0 Network controller: Intel Corporation Wireless 3160 (rev 83) Subsystem: Intel Corporation Dual Band Wireless AC 3160 [root@orbex ~]# grep iwlwifi messages Nov 10 03:44:02 orbex kernel: iwlwifi 0000:04:00.0: Error sending SCAN_OFFLOAD_REQUEST_CMD: enqueue_hcmd failed: -5 Nov 10 03:44:02 orbex kernel: iwlwifi 0000:04:00.0: Scan failed! ret -5 Nov 10 03:44:02 orbex kernel: iwlwifi 0000:04:00.0: Failed to wake NIC for hcmd 100s of similar lines Nov 10 14:55:01 orbex kernel: iwlwifi 0000:04:00.0: Failed to wake NIC for hcmd Nov 10 14:55:01 orbex kernel: iwlwifi 0000:04:00.0: Error sending SCAN_OFFLOAD_REQUEST_CMD: enqueue_hcmd failed: -5 Nov 10 14:55:01 orbex kernel: iwlwifi 0000:04:00.0: Scan failed! ret -5 Nov 10 14:56:37 orbex kernel: iwlwifi 0000:04:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm Nov 10 14:56:37 orbex kernel: iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164 Nov 10 14:56:37 orbex kernel: iwlwifi 0000:04:00.0: base HW address: 34:de:1a:f0:c2:fb Nov 10 14:56:38 orbex NetworkManager[1154]: <info> [1573394198.8523] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi) [root@orbex log]# Any advice? Thanks! -- Patrick Derwael Rue de la fontaine, 3 4210 Burdinne Tél:+32.(0)479.80.50.79

1 0

Need help modding src.rpms to generate complete SAMBA AD DC binary RPMs for CentOS 8
by Robert G (Doc) Savage 09 Nov '19

09 Nov '19

When RHEL8 and CentOS8 were released, I was looking forward to setting up SAMBA as a AD DC server for CentOS8. But when I lifed the hood on the samba.spec file I found the option to build the samba-dc binary rpm has been disabled for rhel family builds. Apparently Red Hat does not want to support a unified SAMBA AD DC environment. I believe we have all of the componentns needed to set up a fully up-to-date samba-dc binary. But it's been decades since I last rolled up my sleeves with my hardbound copy of "Maximum RPM" and built custom binary rpms. Has anyone already done this as a COPR or similar project? Failing that, I'm willing to work with anyone with more up-to-date rpmbuild tools to create and document the process. --Doc Savage Fairview Heights, IL

3 2

named errors in /var/log/messages
by Walter H. 09 Nov '19

09 Nov '19

Hello, can someone explain these errors Oct 27 15:34:05 vhost01 named[1316]: zone #ZONE#/IN/auth: refresh: retry limit for master IPV6-MASTER#53 exceeded (source IPV6-THIS#0) Oct 27 15:34:05 vhost01 named[1316]: zone #ZONE#/IN/auth: Transfer started. Oct 27 15:34:06 vhost01 named[1316]: zone #ZONE#/IN/auth: refresh: retry limit for master IPV6-MASTER#53 exceeded (source IPV6-THIS#0) Oct 27 15:34:06 vhost01 named[1316]: zone #ZONE#/IN/auth: Transfer started. Oct 29 04:06:19 vhost01 named[1316]: zone #ZONE#/IN/auth: refresh: retry limit for master IPV6-MASTER#53 exceeded (source IPV6-THIS#0) Oct 29 04:06:19 vhost01 named[1316]: zone #ZONE#/IN/auth: Transfer started. is this caused by a misconfiguration at the master dns or this dns (slave)? (the master dns can only be connected by IPv6) is there a serious problem? there also can be found such entries Oct 29 04:06:21 vhost01 named[1316]: transfer of '#ZONE#/IN/auth' from IPV6-MASTER#53: connected using IPV6-THIS#46019 Oct 29 04:06:21 vhost01 named[1316]: transfer of '#ZONE#/IN/auth' from IPV6-MASTER#53: Transfer completed: 0 messages, 1 records, 0 bytes, 0.064 secs (0 bytes/sec) or is this just caused by #0 - I guess source port 0? these are the ip6tables entries on this dns (slave) -A INPUT -i eth0 -d IPV6-THIS -m tcp -p tcp --dport 53 -m state --state NEW -j ACCEPT -A INPUT -i eth0 -d IPV6-THIS -m udp -p udp --dport 53 -j ACCEPT the master has these for each dns -A INPUT -i sit1 -s IPV6-SLAVE -d IPV6-MASTER -m tcp -p tcp --dport 53 -m state --state NEW -j ACCEPT -A INPUT -i sit1 -s IPV6-SLAVE -d IPV6-MASTER -m udp -p udp --dport 53 -j ACCEPT the master DNS has this in /etc/named.conf acl dns-hosts { IPV6-SLAVE; // IPv6only: slave ... }; view "auth" { match-clients { dns-hosts; }; empty-zones-enable no; recursion no; additional-from-auth no; additional-from-cache no; also-notify { IPV6-SLAVE; // IPv6only: slave ... }; notify-source 0.0.0.0; notify-source-v6 IPV6-MASTER; transfer-source 0.0.0.0; transfer-source-v6 IPV6-MASTER; zone "#ZONE#" IN { type master; notify yes; file "named._authzone-#ZONE#"; allow-transfer { dns-hosts; }; allow-update { none; }; }; ... }; the slaves itself have this in /etc/named.conf masters masterhost { IPV6-MASTER; // IPv6only: master }; view "auth" { match-clients { any; }; empty-zones-enable no; recursion no; transfer-source 0.0.0.0; transfer-source-v6 IPV6-SLAVE; additional-from-auth no; additional-from-cache no; zone "#ZONE#" IN { type slave; masters { masterhost; }; file "slaves/named._authzone-#ZONE#"; }; ... }; I have 3 slave DNS servers, each has the same master; and such log entries are at all three slave DNS servers; each of these 3 slaves is DualStack (in the wild) and the master is IPv6only (at home) Thanks, Walter

2 1

yum install fails - itertoolsmodule.so
by Gary Stainburn 08 Nov '19

08 Nov '19

I've just tried a yum update on one of my C7 boxes and got the following output. I'm guessing to fix this I need to re-install the RPM, but I can't remove it because of dependancies, so how can I fix the problem? I've managed to download a later version of the RPM, but haven't managed to find the same version as the one installed. Gary [root@zeppo ~]# yum install There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/python2.7/lib-dynload/itertoolsmodule.so: cannot read file data: Input/output error Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.7.5 (default, Sep 15 2016, 22:37:39) [GCC 4.8.5 20150623 (Red Hat 4.8.5-4)] If you cannot solve this problem yourself, please go to the yum faq at: http://yum.baseurl.org/wiki/Faq [root@zeppo ~]# rpm -qf /usr/lib64/python2.7/lib-dynload/itertoolsmodule.so python-libs-2.7.5-39.el7_2.x86_64 [root@zeppo ~]# [root@zeppo ~]# rpm -e python-libs-2.7.5-39.el7_2.x86_64 error: Failed dependencies: libpython2.7.so.1.0()(64bit) is needed by (installed) python-lxml-3.2.1-4.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) yum-metadata-parser-1.1.4-10.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) pyliblzma-0.5.3-11.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) pyxattr-0.5.1-5.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) cmpi-bindings-pywbem-0.9.5-6.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-kmod-0.9-4.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) newt-python-0.52.15-4.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-setproctitle-1.1.6-5.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-ethtool-0.8-5.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-urwid-1.1.1-3.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-pycurl-7.19.0-17.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) PyYAML-3.10-11.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) pygpgme-0.3-9.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-cups-1.9.63-6.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-2.7.5-39.el7_2.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) libxml2-python-2.9.1-6.el7_2.3.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) gdb-7.6.1-80.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-dmidecode-3.10.13-11.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-perf-3.10.0-327.36.3.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) cryptsetup-python-1.6.7-1.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) pyparted-1:3.9-13.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) rpm-python-4.11.3-17.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) iscsi-initiator-utils-6.2.0.873-33.el7_2.2.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-pcp-3.10.6-2.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) lvm2-python-libs-7:2.02.130-5.el7_2.5.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) perf-3.10.0-327.36.3.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) m2crypto-0.21.1-17.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) python-pillow-2.0.0-19.gitd1c6db8.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) bacula-libs-5.2.13-23.1.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) bacula-storage-5.2.13-23.1.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) bacula-client-5.2.13-23.1.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) gnome-python2-canvas-2.28.1-14.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) gnome-python2-bonobo-2.28.1-14.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) gnome-python2-gnomevfs-2.28.1-14.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) gnome-python2-gnome-2.28.1-14.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) pytalloc-2.1.6-1.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) samba-libs-0:4.4.4-9.el7.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) policycoreutils-python-2.5-11.el7_3.x86_64 libpython2.7.so.1.0()(64bit) is needed by (installed) systemd-python-219-30.el7_3.8.x86_64 python-libs(x86-64) = 2.7.5-39.el7_2 is needed by (installed) python-2.7.5-39.el7_2.x86_64 [root@zeppo ~]#

3 3

C8: Wayland Session / Cut and Paste
by Leon Fauster 08 Nov '19

08 Nov '19

Is this the normal behavior now? Cutting text in gedit and pasting it into the terminal needs that the source application stays running? -- Leon

5 5

Possible Font problem with CentOS 7
by Tony Molloy 07 Nov '19

07 Nov '19

Hi, I've got a possible font problem with a fully updated CentOS 7 system. An example with the man command. #man kill Should return the following KILL(1) User Commands KILL(1) NAME kill - terminate a process SYNOPSIS kill [-s signal|-p] [-q sigval] [-a] [--] pid... kill -l [signal] but what I actually get is the following KILL(1) User Commands KILL(1) kill - terminate a process [ signal| ] [ sigval] [ ] [ ] pid... [signal] Notice the missing text. If I select the text and paste it into an editor I see the missing text. So it's there just not displaying on the screen. I also notice the effect with links embedded in e-mails. I use evolution. Embedded links do not appear in the e-mail but if I hover over a link location then it appears in the text box at the bottom of the page and I can select it. I suspect I'm missing some common font(s). Any ideas. Regards, Tony -- Tony Molloy <tony.molloy(a)ul.ie> Home

3 4

CentOS 8.1 build status
by Strahil 07 Nov '19

07 Nov '19

Hi Community, Does anyone got info on 8.1 build status ? The following URL is outdated: https://wiki.centos.org/About/Building_8 Best Regards, Strahil Nikolov

2 1

Re: [CentOS] CentOS 8 for armv7hl
by Patrick Laimbock 07 Nov '19

07 Nov '19

> Hello together > > were can I find any information on working on Centos 8 for ARM 7 ? I can't > find anything. Hi Andreas, There is a CentOS Arm Dev list where you can discuss that topic. You can subscribe at: https://lists.centos.org/mailman/listinfo/arm-dev Best, Patrick

1 0

CentOS 8 for armv7hl
by andreas.reschke＠mahle.com 07 Nov '19

07 Nov '19

Hello together were can I find any information on working on Centos 8 for ARM 7 ? I can't find anything. Mit freundlichen Grüßen / Kind regards Andreas Reschke

1 0

No CentOS 8 Updates announced in Centos-announce email list
by Phelps, Matthew 06 Nov '19

06 Nov '19

I learned from the Centos-devel email list that they aren't sending out email to centos-announce for updates to CentOS 8, but only updating an RSS feed. I think this is a bad idea since no one uses RSS anymore (ducks for cover). What do others here think of this? -- *Matt Phelps* *Information Technology Specialist, Systems Administrator* (Computation Facility, Smithsonian Astrophysical Observatory) Center for Astrophysics | Harvard & Smithsonian 60 Garden Street | MS 39 | Cambridge, MA 02138 email: mphelps(a)cfa.harvard.edu cfa.harvard.edu | Facebook <http://cfa.harvard.edu/facebook> | Twitter <http://cfa.harvard.edu/twitter> | YouTube <http://cfa.harvard.edu/youtube> | Newsletter <http://cfa.harvard.edu/newsletter>

8 7

RHEL 8.1
by Thomas Stephen Lee 06 Nov '19

06 Nov '19

RHEL 8.1 released to cdn. did $ dnf upgrade and got 8.1 No official announcement yet. thanks --- Thomas Stephen Lee

2 1

Gluster v6.6 missing in repos (CentOS 7)
by Strahil 05 Nov '19

05 Nov '19

Hi All, Am I the only one that doesn't see the GlusterFS v6.6 ? It was released last week and I thought that it will be here in a day or 2 . Best Regards, Strahil Nikolov

2 1

PL2303 Device With HP PID get garbage data after plug-in
by Scott Chen 05 Nov '19

05 Nov '19

Hello I installed CentOS 8 on a clean system.I tested a pl2303 ic with different PID. If i use HP PID 0x4349,i will receive junk data after connecting, but the pl2303 PID 0x2303 work normally. Does someone know about how to fix this situation? thanks Test video link: HP VID/PID - https://www.dropbox.com/s/9hj7im5tr4e1v1u/HP.mp4?dl=0 Prolific VID/PID - https://www.dropbox.com/s/7vahhzjx64g1fs4/Prolific.mp4?dl=0 -- 雷寶科技股份有限公司 LABAU Technology Corp. Scott Chen TEL : 22182277 ext:382 FAX : 22185522 地址 :新北市新店區中正路531-1號9樓

1 0

Re: [CentOS] Limit user password by time
by Gestió Servidors 04 Nov '19

04 Nov '19

Is it possible with "chage" to configure a password caducity for, at most, 2 hours? I think "chage" only allows caducity for, at least, one day.

3 3

CentOS-8 not loading nf_conntrack module
by Adrian van Bloois 03 Nov '19

03 Nov '19

Hi, On my CentOS-8 box firewalld will not start. It appears to be because the nf_conntrack module cannot be loaded. I saw on the net that a similar issue occurred on C7, but I couldn't find the solution. What is going wrong? Any ideas? Adrian -- Adri P. van Bloois "Elegance is not a dispensable luxury but a factor that decides between success and failure." Edsger W. Dijkstra

2 1

CentOS-announce Digest, Vol 177, Issue 2
by centos-announce-request＠centos.org 02 Nov '19

02 Nov '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2019:3286 Critical CentOS 7 php Security Update (Johnny Hughes) 2. CESA-2019:3281 Critical CentOS 6 firefox Security Update (Johnny Hughes) 3. CEEA-2019:3280 CentOS 6 nspr Enhancement Update (Johnny Hughes) 4. CEEA-2019:3280 CentOS 6 nss-util Enhancement Update (Johnny Hughes) 5. CEEA-2019:3280 CentOS 6 nss-softokn Enhancement Update (Johnny Hughes) 6. CEEA-2019:3280 CentOS 6 nss Enhancement Update (Johnny Hughes) 7. CESA-2019:3287 Critical CentOS 6 php Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 1 Nov 2019 22:23:48 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3286 Critical CentOS 7 php Security Update Message-ID: <20191101222348.GA26794(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3286 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2019:3286 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 683024ee0c41bb25db0b985835aa76033ea743451692d19058a01b2656958f30 php-5.4.16-46.1.el7_7.x86_64.rpm c610eec792cd486d031f55b271205f3e73dd357021cdd8290a5f85623290e920 php-bcmath-5.4.16-46.1.el7_7.x86_64.rpm 315c0c103ac3f24c0ff1bf4bd112838cd9bbb9f754e5f559aefd9e9c5c4c5870 php-cli-5.4.16-46.1.el7_7.x86_64.rpm 731e0de0dacb16dba81c8b56a42f9023dde2d2e5f18d968340cfdc1241012f48 php-common-5.4.16-46.1.el7_7.x86_64.rpm 1d58c86d2b3b92fd0571720117d988ffe572ab429f97d12c1ee893046675b7ed php-dba-5.4.16-46.1.el7_7.x86_64.rpm 445df9aedf957446dca7fa528b1ddc15fb7d1e5a72b7d67d7008ee4a186c130d php-devel-5.4.16-46.1.el7_7.x86_64.rpm ae5d52170230586201001205228e2ad56c9f100e80596a4c5a88c2d6d26b11cd php-embedded-5.4.16-46.1.el7_7.x86_64.rpm 1eab15e77572498e68624bedde89012f1efcc17ada2be14c8dd172423cb635dd php-enchant-5.4.16-46.1.el7_7.x86_64.rpm e49ca9866eb8c8d0b423f4ae31746442ccbb0e3e029447e1c321208ae9941898 php-fpm-5.4.16-46.1.el7_7.x86_64.rpm b159ec9d6f3466643adf429b20e39fc7527038f6922a774ce3e3a3e39a53b0b8 php-gd-5.4.16-46.1.el7_7.x86_64.rpm a534fde94ad37615cc60f679e14041ce8fa8e04de455ae133a4b6327b98e4328 php-intl-5.4.16-46.1.el7_7.x86_64.rpm 5591fe163318cd17b46fe775e1f305f6311cf7a40f965f661c821fd3bc2f22eb php-ldap-5.4.16-46.1.el7_7.x86_64.rpm fa7684186f77d50eec071f15d3f158c537cf13e1ba6e93476c836748b46f8ccf php-mbstring-5.4.16-46.1.el7_7.x86_64.rpm 33941527ff50eccfa2b53184bc54be263da9b083311afed88e31a388e8ac8718 php-mysql-5.4.16-46.1.el7_7.x86_64.rpm c3b954624655cc381e9174e390bc3201f502ed2ac9d7c4ef4e965210892f140d php-mysqlnd-5.4.16-46.1.el7_7.x86_64.rpm 4490dc73ba1565f5bfa32216679d9805604440a9f78ebe8d914e2c3892c71e33 php-odbc-5.4.16-46.1.el7_7.x86_64.rpm f0850e6a975bd20c88f128524a7067eb56c3d4956aee850acfa6ac0c8a3e4499 php-pdo-5.4.16-46.1.el7_7.x86_64.rpm 498a7651cd6d6a0db975ef8e426c975cf1c4938b24b77dca2a51f72eb02741b7 php-pgsql-5.4.16-46.1.el7_7.x86_64.rpm 2cbf747bd15733f7ec745b6624b83733be77130468d31dd6e3605e6f9a013f78 php-process-5.4.16-46.1.el7_7.x86_64.rpm 5394664c89b4a2d7b226dfbba9a5a7e7cc18d494ce5c5858ee1dc7b64eb5f65e php-pspell-5.4.16-46.1.el7_7.x86_64.rpm ad499b89e34004c53dc86544ba5be7afdef740141e170cd9eb0578b4d30546e8 php-recode-5.4.16-46.1.el7_7.x86_64.rpm 885ccf3db228dd6652c186b1143ae15c67189673fc21836c7dd6b8ad4765d94b php-snmp-5.4.16-46.1.el7_7.x86_64.rpm 40a086b9b411c1b7d4e7c8c862c97aa2291902c44d67baaab8f19470db4b3c79 php-soap-5.4.16-46.1.el7_7.x86_64.rpm 3b114aae058d9b120ed3175595e2b82ed83a41ad8991f26983e7acded0219bf5 php-xml-5.4.16-46.1.el7_7.x86_64.rpm c5d874171592244783e8a37441050519287a337edb1076f92c1bf1da34362cab php-xmlrpc-5.4.16-46.1.el7_7.x86_64.rpm Source: 0740a88c0579c0b4e100bd06067b535388027c4d0f979c579e8fd8a3573df87b php-5.4.16-46.1.el7_7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Fri, 1 Nov 2019 22:26:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3281 Critical CentOS 6 firefox Security Update Message-ID: <20191101222611.GA26975(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3281 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2019:3281 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2c85c2f5ad6eb26c694c44e0d93e304bba0e5acee0b2d85f28fbaf05097d4d8a firefox-68.2.0-4.el6.centos.i686.rpm x86_64: 2c85c2f5ad6eb26c694c44e0d93e304bba0e5acee0b2d85f28fbaf05097d4d8a firefox-68.2.0-4.el6.centos.i686.rpm a820d6ca764fb01eb27179baf01b844157f800a2ddca23e64781a3345077c803 firefox-68.2.0-4.el6.centos.x86_64.rpm Source: 4b8e11d5983930eb41fd33e008383ced83791edea1fb1dd07026d032504590ed firefox-68.2.0-4.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Fri, 1 Nov 2019 22:28:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:3280 CentOS 6 nspr Enhancement Update Message-ID: <20191101222844.GA27226(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:3280 Upstream details at : https://access.redhat.com/errata/RHEA-2019:3280 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1d3ff6e3e00c338c5afad2934ced1be065cec2d46df814da71a4f660378e504c nspr-4.21.0-1.el6_10.i686.rpm 2e3cfda21690d3cc620de6a77df083226d03766fc1f16292538719423b2aa35f nspr-devel-4.21.0-1.el6_10.i686.rpm x86_64: 1d3ff6e3e00c338c5afad2934ced1be065cec2d46df814da71a4f660378e504c nspr-4.21.0-1.el6_10.i686.rpm b17f2cbae1a06c80f64a459978b5fc36d12f8c447e7cae02c0950813e34a03bb nspr-4.21.0-1.el6_10.x86_64.rpm 2e3cfda21690d3cc620de6a77df083226d03766fc1f16292538719423b2aa35f nspr-devel-4.21.0-1.el6_10.i686.rpm 7b65c952f07581731c7fa747a00ca1e5948eaa78d8c52e6db0f2c3bff8461e3d nspr-devel-4.21.0-1.el6_10.x86_64.rpm Source: 2ad5199672b8186f3947049f83c45fc23598e8e3bf60342946746ce499401a75 nspr-4.21.0-1.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 4 Date: Fri, 1 Nov 2019 22:28:59 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:3280 CentOS 6 nss-util Enhancement Update Message-ID: <20191101222859.GA27361(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:3280 Upstream details at : https://access.redhat.com/errata/RHEA-2019:3280 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 74fe18ae5942abd981c453b4aed84c819e7106ead64c27937f587ef7fcfb7fd4 nss-util-3.44.0-1.el6_10.i686.rpm f4d11d0c85e884dd6c8ef35afc6bb8bb9bd645c12e428fc8579dcd4eb6f125d5 nss-util-devel-3.44.0-1.el6_10.i686.rpm x86_64: 74fe18ae5942abd981c453b4aed84c819e7106ead64c27937f587ef7fcfb7fd4 nss-util-3.44.0-1.el6_10.i686.rpm 23ae0a4c442c9f44e035f1ce3aa66a82a7f74e290d08fb743ac45eb8151c724c nss-util-3.44.0-1.el6_10.x86_64.rpm f4d11d0c85e884dd6c8ef35afc6bb8bb9bd645c12e428fc8579dcd4eb6f125d5 nss-util-devel-3.44.0-1.el6_10.i686.rpm 46f0fd367fcfb62c5f1e9e2d70b5ba1f1d22e4ea96cd185f0417d6a6a6ea2e91 nss-util-devel-3.44.0-1.el6_10.x86_64.rpm Source: 73cb9a883828d93a0583c681c365c654eadae54a513fb16cc1022b3b74ef15b1 nss-util-3.44.0-1.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 5 Date: Fri, 1 Nov 2019 22:29:25 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:3280 CentOS 6 nss-softokn Enhancement Update Message-ID: <20191101222925.GA27551(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:3280 Upstream details at : https://access.redhat.com/errata/RHEA-2019:3280 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f1debe8d9e2d4714262b7c840fb732616485d24c1b0dcbc94861fff14004feb0 nss-softokn-3.44.0-5.el6_10.i686.rpm 023860cb6759c9169787f0c6f7d8e5e8280fbb8e061d9ff645dbeb06a334fa28 nss-softokn-devel-3.44.0-5.el6_10.i686.rpm 11e51fa7464a82daf8885940e607b7336f26ee0dc6541c14b95855b3df996005 nss-softokn-freebl-3.44.0-5.el6_10.i686.rpm 6f354c9da30abe75653a9ca0f235bc6aa6c40ea179287132be17e9f40fc27d9a nss-softokn-freebl-devel-3.44.0-5.el6_10.i686.rpm x86_64: f1debe8d9e2d4714262b7c840fb732616485d24c1b0dcbc94861fff14004feb0 nss-softokn-3.44.0-5.el6_10.i686.rpm f25e6be4ea5fce33a11eda4cbf3b6f934e749d7eef7ab0eab4c5ce6433cea76c nss-softokn-3.44.0-5.el6_10.x86_64.rpm 023860cb6759c9169787f0c6f7d8e5e8280fbb8e061d9ff645dbeb06a334fa28 nss-softokn-devel-3.44.0-5.el6_10.i686.rpm 3f2432940b1744f8a2cf8f58a32a55c6f0da3371be3fffd60abd099ba76de950 nss-softokn-devel-3.44.0-5.el6_10.x86_64.rpm 11e51fa7464a82daf8885940e607b7336f26ee0dc6541c14b95855b3df996005 nss-softokn-freebl-3.44.0-5.el6_10.i686.rpm d337d235881c899b0c54c40699decaedcfe021e0aed94f778c4806ba442c839e nss-softokn-freebl-3.44.0-5.el6_10.x86_64.rpm 6f354c9da30abe75653a9ca0f235bc6aa6c40ea179287132be17e9f40fc27d9a nss-softokn-freebl-devel-3.44.0-5.el6_10.i686.rpm e160fe3cda13ce5ba1a3b8dd7c81b8c2e07564bf3efc0c4a0a47d0ee9058e64a nss-softokn-freebl-devel-3.44.0-5.el6_10.x86_64.rpm Source: 9770cb1a9d0c56751cad2b0d5c17dd5bcc3de76209e07aa8acc9078413df5ca9 nss-softokn-3.44.0-5.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 6 Date: Fri, 1 Nov 2019 22:29:53 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEEA-2019:3280 CentOS 6 nss Enhancement Update Message-ID: <20191101222953.GA27745(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2019:3280 Upstream details at : https://access.redhat.com/errata/RHEA-2019:3280 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1743ed7e5d97dbc7c595b6256e49bf10f50bc76ddf276ce3fe591e808544df52 nss-3.44.0-7.el6_10.i686.rpm 9231cee266e824036adc41057694eeef1c0ac9a0f8685150021c7afa48a1141f nss-devel-3.44.0-7.el6_10.i686.rpm 633a3e239066992878ce13b88e39202621a390086cf462dce63896c4dde7a268 nss-pkcs11-devel-3.44.0-7.el6_10.i686.rpm d30ab3922bd9f37e0d454ca9d61f0dbb73bcb89bc3bc853334220ea2c625e9a9 nss-sysinit-3.44.0-7.el6_10.i686.rpm a2e3afa0825acdea536629c7bba8adbde29d5fd09f3820cd8e63e08cfbc41a24 nss-tools-3.44.0-7.el6_10.i686.rpm x86_64: 1743ed7e5d97dbc7c595b6256e49bf10f50bc76ddf276ce3fe591e808544df52 nss-3.44.0-7.el6_10.i686.rpm dbda3c02067a70d567e2486a28cac77ca57093194faf3f4cd3478adfc74b40f0 nss-3.44.0-7.el6_10.x86_64.rpm 9231cee266e824036adc41057694eeef1c0ac9a0f8685150021c7afa48a1141f nss-devel-3.44.0-7.el6_10.i686.rpm 5c7b9148a41541f291fff7f132b2904065b2f1199edcdecab78c2355fa0fab54 nss-devel-3.44.0-7.el6_10.x86_64.rpm 633a3e239066992878ce13b88e39202621a390086cf462dce63896c4dde7a268 nss-pkcs11-devel-3.44.0-7.el6_10.i686.rpm 7faa5a0d50ae191297b5198525e957601d2b5d1e2453b229a242ce5224b04dc3 nss-pkcs11-devel-3.44.0-7.el6_10.x86_64.rpm 33e281d825489c8ec304bf5f0d748986f27192ff7293d386abd9a7043e253108 nss-sysinit-3.44.0-7.el6_10.x86_64.rpm 9a0203752189ce9c915e73c31a0eb45cbc4038f39506a0ef5b4d49d1b743354e nss-tools-3.44.0-7.el6_10.x86_64.rpm Source: 8921d438ccb7a4f6574b4c7141aeaa60da790a2d00137590a2586c70d48a60b3 nss-3.44.0-7.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 7 Date: Fri, 1 Nov 2019 22:31:56 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3287 Critical CentOS 6 php Security Update Message-ID: <20191101223156.GA28682(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3287 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2019:3287 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4a874dba90841301408c563e8f63f4b50d15fcb52bc68e23fb582d0e3c044b25 php-5.3.3-50.el6_10.i686.rpm 4cab8b0f66dcb50b38b98de4e3ac84d60b2c109040dc5eee456ee8ee28438a59 php-bcmath-5.3.3-50.el6_10.i686.rpm 9172d17e62721ec3ec011f7651c9ca97424c3d928ff6e672d4e84118607aa592 php-cli-5.3.3-50.el6_10.i686.rpm 4503d5df5227a4200f9341cf78e4b518e7e5d968502cfc615097938d2791d52d php-common-5.3.3-50.el6_10.i686.rpm 5a1c61742a1ab699005977bee2e6a5e204757da9ba8a62b1b84c4fc402464027 php-dba-5.3.3-50.el6_10.i686.rpm b83ea83bd4355e18fd6f325db69e224be74c46677a4f2c3b33ed0c158cfeb4fc php-devel-5.3.3-50.el6_10.i686.rpm aec8198710f38b4a13082c7d65929109a1710b3d83c68be79a798115231ea4c7 php-embedded-5.3.3-50.el6_10.i686.rpm 10026e2a5071b3b216feb83540f2b06fd644a4f793a374023cb8799fd2591ce2 php-enchant-5.3.3-50.el6_10.i686.rpm e7542a528b421ebede6c4b163756fd230488b5e3b609d0dcb59528ac073e59e6 php-fpm-5.3.3-50.el6_10.i686.rpm befee548cfb57892af63d293a428c701ab4e8103a863cb55a71ea747d6fad323 php-gd-5.3.3-50.el6_10.i686.rpm 2e17d4530540e2bbd7e81c1a63e8339d3d089b556e9121065df581a114d63be8 php-imap-5.3.3-50.el6_10.i686.rpm 55f998ef7c7bbb0814a64dc5b11cd080d4fcf1fde45b4618cf6b6c0fb6cd130b php-intl-5.3.3-50.el6_10.i686.rpm 8edbb3368f7676552d4378dc8de0025541ebaa47ffc191d8d766719dd2176b5a php-ldap-5.3.3-50.el6_10.i686.rpm 7e1f94a45781ba3223d1ad229b946a14679c6139656400cf19dfc6ddc9712f16 php-mbstring-5.3.3-50.el6_10.i686.rpm fcbced068cab2243d5315854f9e55b87b6ce63cda6878f9b4b907c61e35a4973 php-mysql-5.3.3-50.el6_10.i686.rpm 70667c57705eafbb71ee774ce4532b1c96a1159094ff15f58f4da0ef384d0ffb php-odbc-5.3.3-50.el6_10.i686.rpm aab71a3e47fcef5e34aec7f785d3468807cce78003f4588583dfba4880a7e9d6 php-pdo-5.3.3-50.el6_10.i686.rpm c68658f0e1ca502a445c32cea15959545b38ca5dde7494727d8803a22efd54b6 php-pgsql-5.3.3-50.el6_10.i686.rpm 14177ef0f5ed58319dc65813fdcbf5f88767b5483149a6b105ff5ad3b07d8e8e php-process-5.3.3-50.el6_10.i686.rpm 6cd86f54b44d4531b17924053726f643809221164a4f4a4c63a6501ca18f285f php-pspell-5.3.3-50.el6_10.i686.rpm d9cea17b69536141e30241879ba56113043ba0d8aa492d8f498db9b1eb0ee45d php-recode-5.3.3-50.el6_10.i686.rpm 5e3d5b55a2dbf961b1c3029b6889e8ab5c9370dbefc7ce728fb7c827fee721db php-snmp-5.3.3-50.el6_10.i686.rpm d642a71ecf628f8986401a8d609653650b1aa84c3dcd5db08f909cf2c1c55e8b php-soap-5.3.3-50.el6_10.i686.rpm d5c1cef29b9525a5eb59cf8aa43061ae25be30e7e4d3268143d897d3b2bfb88b php-tidy-5.3.3-50.el6_10.i686.rpm f39216178f04d8480588d7cccd60faaffea2173df455609346883eb1c6946c57 php-xml-5.3.3-50.el6_10.i686.rpm ce58a63d95736dafd27908b2302adcd084099133fe34021aea8bb0738c359a39 php-xmlrpc-5.3.3-50.el6_10.i686.rpm c2b6107645bc4ecd516eedd0f86cd8c25b90d570c463360c2adacf1c07e918e3 php-zts-5.3.3-50.el6_10.i686.rpm x86_64: 2570f9bc05ada82069f319458a10539f32c460968a1e9a326b83be471e334886 php-5.3.3-50.el6_10.x86_64.rpm 788f4bcaa3540d885b47239def8912ba7423aed62a2cc9e346a9f53fe0f563dd php-bcmath-5.3.3-50.el6_10.x86_64.rpm 42251b1beea2f4f4b612e973c96a9267e53dc82a2c03fc89d993f14e2755b566 php-cli-5.3.3-50.el6_10.x86_64.rpm 084289091aff936e5371f9221040accd9918cff492ddce2a8463bdfa5baea2d4 php-common-5.3.3-50.el6_10.x86_64.rpm c6b218967f8dcb6b123786a3b5779bbbc88a47ed8bb90d1d924ba03acc64495c php-dba-5.3.3-50.el6_10.x86_64.rpm 34e1cd733754538f18857854265f1cb0073432c3ebd36e9910992160e394e51e php-devel-5.3.3-50.el6_10.x86_64.rpm 80291c6a2f821ab397d81aabbefe7286b1ce694cbd00f4189ba325de8d3a8273 php-embedded-5.3.3-50.el6_10.x86_64.rpm 20565529a0f913697fcf1114486fd7f968f827046d69bf479ddc766a1fc418fb php-enchant-5.3.3-50.el6_10.x86_64.rpm 23aea08f51866215e65657a083b3d6c70cb8c78e5ff754bf55d3154fb08d3832 php-fpm-5.3.3-50.el6_10.x86_64.rpm 41fb2cb2dbadb73c3387490c262a0af77af0ce29e8dfa07598c82a4caf82b613 php-gd-5.3.3-50.el6_10.x86_64.rpm 2a979dc602e355bec6af5629396ab5fd8e10a7d5b8b054a303d3a4acd2e45b79 php-imap-5.3.3-50.el6_10.x86_64.rpm 2efe4c34163ef62e9ebf0a356c99296711bc4da2d447fde165dc4b2bce4d3567 php-intl-5.3.3-50.el6_10.x86_64.rpm 2a5b52e19f24f7f3cdffc0a2af37e150d370831257a085b1e961f6e7b6aa3d18 php-ldap-5.3.3-50.el6_10.x86_64.rpm d82c71a3b679a15a7f12a55a880e1989d988c2fd6c22a22eadba2875a7dbe620 php-mbstring-5.3.3-50.el6_10.x86_64.rpm 95e3edd3146ab92cc5204f5cc13de8d19601edc2b9f7a9c5962723e01c0911ff php-mysql-5.3.3-50.el6_10.x86_64.rpm 18f604c573c24ac61d62567450c6613787c883f7852b2001cc24622ea253a959 php-odbc-5.3.3-50.el6_10.x86_64.rpm 62bf86d47dc5fe8aad57549df86e1403d060ca30b82c36a07cbd4a495b3a78f8 php-pdo-5.3.3-50.el6_10.x86_64.rpm 3b1d8c2cee8256856a18d0a75b73e5a147e754db832e71deb05b28117b5abd0f php-pgsql-5.3.3-50.el6_10.x86_64.rpm cabc8f6e2d0112c9e43beef1e959d23c39526c1c4faa3fe016f0e73014c39e6a php-process-5.3.3-50.el6_10.x86_64.rpm 731b3e0cf46a674cfdd556e89f345c52f49e6bb3184fa930a1ab05d182e1f025 php-pspell-5.3.3-50.el6_10.x86_64.rpm fb762919caeb856ff84751388121f8aada01a1e98c47e3f0d6f255c85745a5ec php-recode-5.3.3-50.el6_10.x86_64.rpm c45ef0f39b3e11421a32197942c4e82adbd8d321a906f095da98cd9cbfceeffb php-snmp-5.3.3-50.el6_10.x86_64.rpm 86a9a637c78dc4606ac8dbfa4affdf3285e542509fd95e7446cf69e0fe519c7a php-soap-5.3.3-50.el6_10.x86_64.rpm 9858f931978f6e59f89115b41de33341e9bbb33149f008d3b1c6ee9489cee6b5 php-tidy-5.3.3-50.el6_10.x86_64.rpm db6ca7f702fc2e9c022301e3ddd1b1fd7fcba548ccd372124e61d03f9543a683 php-xml-5.3.3-50.el6_10.x86_64.rpm 042884d6be74325bb8fca47d36dd6fc3ca5a345906b4b2608cb14843e6b078de php-xmlrpc-5.3.3-50.el6_10.x86_64.rpm 0e886488705bc5fe4f4abc7533620e26e96a98244fa169e18fc06ae6b77c93cb php-zts-5.3.3-50.el6_10.x86_64.rpm Source: ddd0f179582dda7b9f0ef2936948e62455509a7ee651ecc24e33468a20b9b10a php-5.3.3-50.el6_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 177, Issue 2 ***********************************************

1 0

Re: [CentOS] PHP FPM issue
by Thomas Stephen Lee 02 Nov '19

02 Nov '19

RedHat has updated rh-php71-php and rh-php72-php. https://access.redhat.com/errata/RHSA-2019:3300 https://access.redhat.com/errata/RHSA-2019:3299 thanks --- Thomas Stephen Lee On Sat, Nov 2, 2019 at 12:45 AM Kenneth Porter <shiva(a)sewingwitch.com> wrote: > --On Friday, November 01, 2019 12:40 PM +0530 Thomas Stephen Lee > <lee.iitb(a)gmail.com> wrote: > > > yes, those who use software collections will have to wait longer for > > permanent fix i guess. > > Or it may arrive sooner, depending on the repo maintainer for each > package. > I use a COPR package of BackupPC 4 and the packager typically has a new > package rolled a day after an upstream release. > > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos >

1 0

PHP FPM issue
by Thomas Stephen Lee 01 Nov '19

01 Nov '19

Hi, what is the workaround for this? https://www.nginx.com/blog/php-fpm-cve-2019-11043-vulnerability-nginx/ in either CentOS 7 or 8 ? thanks --- Thomas Stephen Lee

4 8

Spacewalk 2.9 Sync Status bar not showing progress
by Laurence Rosen 01 Nov '19

01 Nov '19

Is this a known bug? I cannot get the Snc Status to show progress on the Channel Repositories -> sync page. I must tail -f the logfile to monitor progress which is ok but the status bar works on my 2.8 server. LR -- ******************************************************************************* This e-mail and any of its attachments may contain Interactions LLC proprietary information, which is privileged, confidential, or subject to copyright belonging to the Interactions LLC. This e-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this e-mail is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original and any copy of this e-mail and any printout. Thank You. *******************************************************************************

1 0

CentOS-announce Digest, Vol 177, Issue 1
by centos-announce-request＠centos.org 01 Nov '19

01 Nov '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2019:3193 Critical CentOS 7 firefox Security Update (Johnny Hughes) 2. CESA-2019:3210 Important CentOS 7 thunderbird Security Update (Johnny Hughes) 3. CESA-2019:3197 Important CentOS 7 sudo Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 31 Oct 2019 14:47:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3193 Critical CentOS 7 firefox Security Update Message-ID: <20191031144755.GA14371(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3193 Critical Upstream details at : https://access.redhat.com/errata/RHSA-2019:3193 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f623427e75a11624765bf76950a1e27a6176b06216e1d88a2fca4161a2d5d43f firefox-68.2.0-1.el7.centos.i686.rpm 6cb2fc6d8ca2606f2056b058a902cb4f2bb49e1c1ed85eaf45404bf3b50f0944 firefox-68.2.0-1.el7.centos.x86_64.rpm Source: 77808d14ad945553e17146efbf969ae8059c0a88a20259a0792312cebf80114e firefox-68.2.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 2 Date: Thu, 31 Oct 2019 14:48:49 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3210 Important CentOS 7 thunderbird Security Update Message-ID: <20191031144839.GA14504(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3210 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3210 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 4e0b083ad2cf304b4b3cc49e4cf6ba35f4f0845b279fffe77f4a5f647a18e9c4 thunderbird-68.2.0-1.el7.centos.x86_64.rpm Source: f4370d730dc220cbfe085587821fd05365005b4316c8ae91992dd30cc07335bd thunderbird-68.2.0-1.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Message: 3 Date: Thu, 31 Oct 2019 14:50:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:3197 Important CentOS 7 sudo Security Update Message-ID: <20191031145012.GA14672(a)bstore1.rdu2.centos.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:3197 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:3197 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 51bef6c9700b2222adbfab925c0859b1f53835237cfecf4e7d4f4645e3832b1b sudo-1.8.23-4.el7_7.1.x86_64.rpm 175dbcd940f43918e139a89cb19e420fdaa2dbe516ec0da192094c2b3f97af1f sudo-devel-1.8.23-4.el7_7.1.i686.rpm 317ab59b373fee0a9527429d600e57a58023726b1cbb425978b4584c3ae7e98f sudo-devel-1.8.23-4.el7_7.1.x86_64.rpm Source: 3a1a41999d8973d8a8ec358e67f076070e59c3c908e57eaef877d2111a1907d9 sudo-1.8.23-4.el7_7.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 177, Issue 1 ***********************************************

1 0

Re: [CentOS] NFS shutdown issue
by Darby Vicker 01 Nov '19

01 Nov '19

> I disagree. This is probably part of the NFS server, to catch when > systems are being shut down and cleanly notifying and disconnecting > clients. Interesting - thanks for the info. I can understand that behavior in a shutdown situation. But I'm surprised that unmounting (either cleanly or uncleanly) one of two exported filesystems triggers the NFS service to shutdown completely. Is this consistent with other peoples experiences?

2 1

Help with CentOS 7 and nvidia
by Jerry Geis 01 Nov '19

01 Nov '19

Hello my hardware has: 03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [ION] (rev a2) rpm -qa | grep nvidia nvidia-detect-410.78-1.el7.elrepo.x86_64 kmod-nvidia-340xx-340.107-2.el7_6.elrepo.x86_64 nvidia-x11-drv-340xx-340.107-1.el7.elrepo.x86_64 rpm -qa | grep libva libva-vdpau-driver-0.7.4-19.el7.x86_64 libva-utils-1.8.3-4.el7.x86_64 libva-devel-1.8.3-1.el7.x86_64 libva-1.8.3-1.el7.x86_64 rpm -qa | grep vdpau libva-vdpau-driver-0.7.4-19.el7.x86_64 libvdpau-1.1.1-3.el7.x86_64 vainfo libva info: VA-API version 0.40.0 libva info: va_getDriverName() returns 0 libva info: Trying to open /usr/lib64/dri/nvidia_drv_video.so libva info: Found init function __vaDriverInit_0_40 libva info: va_openDriver() returns 0 vainfo: VA-API version: 0.40 (libva ) vainfo: Driver version: Splitted-Desktop Systems VDPAU backend for VA-API - 0.7.4 vainfo: Supported profile and entrypoints VAProfileMPEG2Simple : VAEntrypointVLD VAProfileMPEG2Main : VAEntrypointVLD VAProfileMPEG4Simple : VAEntrypointVLD VAProfileMPEG4AdvancedSimple : VAEntrypointVLD VAProfileH264Main : VAEntrypointVLD VAProfileH264High : VAEntrypointVLD VAProfileVC1Simple : VAEntrypointVLD VAProfileVC1Main : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD grep Driver /var/log/Xorg.0.log [ 43.069] X.Org Video Driver: 24.0 [ 45.744] Module class: X.Org Video Driver [ 45.744] (II) NVIDIA dlloader X Driver 340.107 Thu May 24 21:18:05 PDT 2018 [ 45.744] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 47.328] Module class: X.Org XInput Driver grep -i vdpau /var/log/Xorg.0.log [ 46.978] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia So to me all looks good - but there is no hardware acceleration??? When I play the video with totem its taking way too much CPU. I removed the ~/.cache/gstreamer* . What have I missed ? Jerry

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss November 2019