Discuss June 2020

discuss@lists.centos.org

103 participants
90 discussions

Upgrade to 8.2 from 7.8
by Jerry Geis 16 Jun '20

16 Jun '20

So now that 8 is out - is it still "frowned" upon to do that in place update ? Is that not a good / valid solution ? Thanks, Jerry

3 2

Simple scan in CentOS 7
by H 16 Jun '20

16 Jun '20

I just installed C7 on a new computer and despite Simple Scan being installed as part of C7, I have not been able to get it to recognize my Canon scanner connected to a USB port. I did have it running on another computer with C7 so there should not be any inherent issues. On a lark I installed gscan2pdf and sane-backends-drivers-scanners and sane-find-scanner found it: found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) at libusb:001:010 I perused my notes for the old computer but did not see I installed any additional software to get it going but I might be wrong. What have I missed? Thank you.

3 5

iwlwifi problem after Centos 8.2 update
by Georgios 16 Jun '20

16 Jun '20

Hi! I get high cpu usage on my laptop (yes im running Centos on my laptop) after my last update. At the beginning i though it was libvrtd but after stopping it gnome monitor keep showing high cpu usage although i couldnt find the app that was responsible for it with the top command. I searched my log files and I saw alot of iwlwifi message. I had to turn off wifi in order to stop high cpu usage. Any ideas how to solve it? Thanks in advance! dmesg command gives me the following output: 649.668600] RSP: 002b:00007fffaa691d60 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 649.668602] RAX: ffffffffffffffda RBX: 000000000000000e RCX: 00007f21aecdeb07 [ 649.668603] RDX: 0000000000000000 RSI: 00007fffaa691db0 RDI: 000000000000000e [ 649.668604] RBP: 00007fffaa691db0 R08: 0000000000000000 R09: 0000000000000000 [ 649.668605] R10: 0000000000000012 R11: 0000000000000293 R12: 0000000000000000 [ 649.668605] R13: 0000000000000000 R14: 00007fffaa691f68 R15: 00007fffaa691f5c [ 649.756674] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM [ 649.756676] iwlwifi 0000:00:14.3: Found debug configuration: 0 [ 649.757247] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm [ 649.757275] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318 [ 649.765604] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 649.765843] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor. [ 649.806204] iwlwifi 0000:00:14.3: base HW address: a0:a4:c5:dd:0c:52 [ 649.852141] ieee80211 phy644: Selected rate control algorithm 'iwl- mvm-rs' [ 649.853603] thermal thermal_zone8: failed to read out thermal zone (-61) [ 649.860442] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 649.881196] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 649.887951] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 649.977952] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.042990] iwlwifi 0000:00:14.3: FW already configured (0) - re- configuring [ 650.050559] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [ 650.250610] iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0. [ 650.250685] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.250686] iwlwifi 0000:00:14.3: Status: 0x00000040, count: 6 [ 650.250687] iwlwifi 0000:00:14.3: Loaded firmware version: 46.6bf1df06.0 [ 650.250688] iwlwifi 0000:00:14.3: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL [ 650.250689] iwlwifi 0000:00:14.3: 0x00A0A2B1 | trm_hw_status0 [ 650.250690] iwlwifi 0000:00:14.3: 0x00000000 | trm_hw_status1 [ 650.250690] iwlwifi 0000:00:14.3: 0x004882DA | branchlink2 [ 650.250691] iwlwifi 0000:00:14.3: 0x0047932A | interruptlink1 [ 650.250692] iwlwifi 0000:00:14.3: 0x0000B0D0 | interruptlink2 [ 650.250692] iwlwifi 0000:00:14.3: 0x0001A83E | data1 [ 650.250693] iwlwifi 0000:00:14.3: 0x00001000 | data2 [ 650.250694] iwlwifi 0000:00:14.3: 0xF0000008 | data3 [ 650.250695] iwlwifi 0000:00:14.3: 0x00000000 | beacon time [ 650.250695] iwlwifi 0000:00:14.3: 0x00038F74 | tsf low [ 650.250696] iwlwifi 0000:00:14.3: 0x00000000 | tsf hi [ 650.250697] iwlwifi 0000:00:14.3: 0x00000000 | time gp1 [ 650.250697] iwlwifi 0000:00:14.3: 0x00038F75 | time gp2 [ 650.250698] iwlwifi 0000:00:14.3: 0x00000001 | uCode revision type [ 650.250699] iwlwifi 0000:00:14.3: 0x0000002E | uCode version major [ 650.250700] iwlwifi 0000:00:14.3: 0x6BF1DF06 | uCode version minor [ 650.250700] iwlwifi 0000:00:14.3: 0x00000312 | hw version [ 650.250701] iwlwifi 0000:00:14.3: 0x18C89008 | board version [ 650.250702] iwlwifi 0000:00:14.3: 0x001E0177 | hcmd [ 650.250702] iwlwifi 0000:00:14.3: 0x20122080 | isr0 [ 650.250703] iwlwifi 0000:00:14.3: 0x00000000 | isr1 [ 650.250704] iwlwifi 0000:00:14.3: 0x08001802 | isr2 [ 650.250704] iwlwifi 0000:00:14.3: 0x404001C0 | isr3 [ 650.250705] iwlwifi 0000:00:14.3: 0x00000000 | isr4 [ 650.250706] iwlwifi 0000:00:14.3: 0x001E0177 | last cmd Id [ 650.250707] iwlwifi 0000:00:14.3: 0x0001A83E | wait_event [ 650.250707] iwlwifi 0000:00:14.3: 0x00000000 | l2p_control [ 650.250708] iwlwifi 0000:00:14.3: 0x00010820 | l2p_duration [ 650.250709] iwlwifi 0000:00:14.3: 0x00000000 | l2p_mhvalid [ 650.250709] iwlwifi 0000:00:14.3: 0x00000000 | l2p_addr_match [ 650.250710] iwlwifi 0000:00:14.3: 0x0000000D | lmpm_pmg_sel [ 650.250711] iwlwifi 0000:00:14.3: 0x08081425 | timestamp [ 650.250711] iwlwifi 0000:00:14.3: 0x0000183C | flow_handler [ 650.250744] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.250744] iwlwifi 0000:00:14.3: Status: 0x00000040, count: 7 [ 650.250746] iwlwifi 0000:00:14.3: 0x20000034 | NMI_INTERRUPT_WDG [ 650.250746] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1 [ 650.250747] iwlwifi 0000:00:14.3: 0xC008885E | umac branchlink2 [ 650.250748] iwlwifi 0000:00:14.3: 0x80454D04 | umac interruptlink1 [ 650.250748] iwlwifi 0000:00:14.3: 0xC00842AC | umac interruptlink2 [ 650.250749] iwlwifi 0000:00:14.3: 0x00000400 | umac data1 [ 650.250750] iwlwifi 0000:00:14.3: 0xC00842AC | umac data2 [ 650.250751] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data3 [ 650.250751] iwlwifi 0000:00:14.3: 0x0000002E | umac major [ 650.250752] iwlwifi 0000:00:14.3: 0x6BF1DF06 | umac minor [ 650.250753] iwlwifi 0000:00:14.3: 0x00038F5B | frame pointer [ 650.250753] iwlwifi 0000:00:14.3: 0xC0886B5C | stack pointer [ 650.250754] iwlwifi 0000:00:14.3: 0x001F010C | last host cmd [ 650.250755] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg [ 650.250772] iwlwifi 0000:00:14.3: Fseq Registers: [ 650.250780] iwlwifi 0000:00:14.3: 0x5CAAF71A | FSEQ_ERROR_CODE [ 650.250788] iwlwifi 0000:00:14.3: 0x00000000 | FSEQ_TOP_INIT_VERSION [ 650.250796] iwlwifi 0000:00:14.3: 0x48E767D9 | FSEQ_CNVIO_INIT_VERSION [ 650.250805] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION [ 650.250813] iwlwifi 0000:00:14.3: 0xBDFB20C4 | FSEQ_TOP_CONTENT_VERSION [ 650.250821] iwlwifi 0000:00:14.3: 0xC098A1DF | FSEQ_ALIVE_TOKEN [ 650.250830] iwlwifi 0000:00:14.3: 0x247AF0C2 | FSEQ_CNVI_ID [ 650.250838] iwlwifi 0000:00:14.3: 0x3AE78660 | FSEQ_CNVR_ID [ 650.250846] iwlwifi 0000:00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP [ 650.250876] iwlwifi 0000:00:14.3: 0x00000201 | CNVR_AUX_MISC_CHIP [ 650.250887] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM [ 650.250944] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR [ 650.250980] iwlwifi 0000:00:14.3: Collecting data: trigger 2 fired. [ 650.250983] ieee80211 phy644: Hardware restart was requested [ 650.251019] iwlwifi 0000:00:14.3: iwlwifi transaction failed, dumping registers [ 650.251021] iwlwifi 0000:00:14.3: iwlwifi device config registers: [ 650.251197] iwlwifi 0000:00:14.3: 00000000: 9df08086 00100406 02800030 00800010 a131c004 00000000 00000000 00000000 [ 650.251198] iwlwifi 0000:00:14.3: 00000020: 00000000 00000000 00000000 42a48086 00000000 000000c8 00000000 0000010b [ 650.251199] iwlwifi 0000:00:14.3: 00000040: 00928010 10000ec0 00100c10 00000000 00000000 00000000 00000000 00000000 [ 650.251201] iwlwifi 0000:00:14.3: 00000060: 00000000 00080812 00000405 00000000 00000000 00000000 00000000 00000000 [ 650.251202] iwlwifi 0000:00:14.3: 00000080: 800f0011 00002000 00003000 00000000 00000000 00000000 00000000 00000000 [ 650.251203] iwlwifi 0000:00:14.3: 000000a0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251204] iwlwifi 0000:00:14.3: 000000c0: 00000000 00000000 c823d001 0d000008 00804005 00000000 00000000 00000000 [ 650.251205] iwlwifi 0000:00:14.3: 000000e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251206] iwlwifi 0000:00:14.3: 00000100: 14c00000 ff000000 000000ff 00462031 00000000 00002000 00000000 00000000 [ 650.251207] iwlwifi 0000:00:14.3: 00000120: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251208] iwlwifi 0000:00:14.3: 00000140: 00000000 00000000 00000000 16410018 00000000 0001001e 00481e1f 00000000 [ 650.251209] iwlwifi 0000:00:14.3: iwlwifi device memory mapped registers: [ 650.251251] iwlwifi 0000:00:14.3: 00000000: 18c89008 00000040 00000000 00000000 00000000 00000000 00000000 00000000 [ 650.251252] iwlwifi 0000:00:14.3: 00000020: 00000000 0c040005 00000312 d55555d5 d55555d5 d55555d5 80008040 041f0040 [ 650.251260] iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD [ 650.251262] CPU: 0 PID: 1437 Comm: NetworkManager Kdump: loaded Not tainted 4.18.0-193.6.3.el8_2.x86_64 #1 [ 650.251263] Hardware name: Dell Inc. Vostro 5481/0PK27Y, BIOS 1.0.0 09/05/2018 [ 650.251263] Call Trace: [ 650.251268] dump_stack+0x5c/0x80 [ 650.251274] iwl_trans_pcie_send_hcmd+0x370/0x380 [iwlwifi] [ 650.251278] ? finish_wait+0x80/0x80 [ 650.251282] iwl_trans_send_cmd+0x5b/0xc0 [iwlwifi] [ 650.251288] iwl_mvm_send_cmd+0x1b/0x40 [iwlmvm] [ 650.251292] iwl_mvm_legacy_config_scan+0x274/0x440 [iwlmvm] [ 650.251297] iwl_mvm_config_scan+0xec/0x100 [iwlmvm] [ 650.251300] iwl_mvm_up+0x89a/0xa60 [iwlmvm] [ 650.251303] __iwl_mvm_mac_start+0x26/0x1d0 [iwlmvm] [ 650.251306] iwl_mvm_mac_start+0x23/0x40 [iwlmvm] [ 650.251318] drv_start+0x43/0x100 [mac80211] [ 650.251327] ieee80211_do_open+0x251/0x900 [mac80211] [ 650.251330] __dev_open+0xcd/0x160 [ 650.251331] __dev_change_flags+0x1ad/0x220 [ 650.251332] dev_change_flags+0x21/0x60 [ 650.251333] do_setlink+0x314/0xe90 [ 650.251334] ? update_curr+0x70/0x1c0 [ 650.251335] ? cpumask_next_and+0x1a/0x20 [ 650.251337] ? __nla_validate_parse+0x51/0x840 [ 650.251338] ? cpumask_next+0x17/0x20 [ 650.251340] ? __snmp6_fill_stats64.isra.56+0x6b/0x110 [ 650.251340] ? __nla_validate_parse+0x51/0x840 [ 650.251341] __rtnl_newlink+0x53d/0x890 [ 650.251343] ? __nla_reserve+0x38/0x50 [ 650.251345] ? security_sock_rcv_skb+0x2a/0x40 [ 650.251346] ? sk_filter_trim_cap+0x49/0x230 [ 650.251348] ? netlink_attachskb+0x1b0/0x1e0 [ 650.251349] ? skb_queue_tail+0x1b/0x50 [ 650.251351] ? __netlink_sendskb+0x51/0x70 [ 650.251354] ? _cond_resched+0x15/0x30 [ 650.251356] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 650.251357] rtnl_newlink+0x43/0x60 [ 650.251358] rtnetlink_rcv_msg+0x200/0x2f0 [ 650.251359] ? rtnl_calcit.isra.35+0x110/0x110 [ 650.251360] netlink_rcv_skb+0x4c/0x120 [ 650.251362] netlink_unicast+0x19e/0x260 [ 650.251363] netlink_sendmsg+0x204/0x3d0 [ 650.251365] sock_sendmsg+0x4c/0x50 [ 650.251366] ___sys_sendmsg+0x29f/0x300 [ 650.251367] ? copy_overflow+0x20/0x20 [ 650.251368] ? __rtnl_unlock+0x25/0x50 [ 650.251369] ? netdev_run_todo+0x5e/0x290 [ 650.251370] ? addrconf_sysctl_forward+0x113/0x250 [ 650.251372] __sys_sendmsg+0x57/0xa0 [ 650.251374] do_syscall_64+0x5b/0x1a0 [ 650.251375] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 650.251376] RIP: 0033:0x7f21aecdeb07 [ 650.251378] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 [ 650.251378] RSP: 002b:00007fffaa692040 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 650.251379] RAX: ffffffffffffffda RBX: 000000000000000e RCX: 00007f21aecdeb07 [ 650.251380] RDX: 0000000000000000 RSI: 00007fffaa692090 RDI: 000000000000000e [ 650.251380] RBP: 00007fffaa692090 R08: 0000000000000000 R09: 0000000000000000 [ 650.251381] R10: 0000000000000002 R11: 0000000000000293 R12: 0000000000000000 [ 650.251381] R13: 0000000000000000 R14: 00007fffaa692248 R15: 00007fffaa69223c [ 650.251384] iwlwifi 0000:00:14.3: Firmware not running - cannot dump error [ 650.271000] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.362380] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.427431] iwlwifi 0000:00:14.3: FW already configured (0) - re- configuring [ 650.436705] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [ 650.636708] iwlwifi 0000:00:14.3: Microcode SW error detected. Restarting 0x0. [ 650.636788] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.636792] iwlwifi 0000:00:14.3: Status: 0x00000050, count: 6 [ 650.636796] iwlwifi 0000:00:14.3: Loaded firmware version: 46.6bf1df06.0 [ 650.636801] iwlwifi 0000:00:14.3: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL [ 650.636804] iwlwifi 0000:00:14.3: 0x00A0A2F1 | trm_hw_status0 [ 650.636807] iwlwifi 0000:00:14.3: 0x00000000 | trm_hw_status1 [ 650.636810] iwlwifi 0000:00:14.3: 0x004882DA | branchlink2 [ 650.636813] iwlwifi 0000:00:14.3: 0x0047932A | interruptlink1 [ 650.636816] iwlwifi 0000:00:14.3: 0x0000B0D0 | interruptlink2 [ 650.636819] iwlwifi 0000:00:14.3: 0x0001A83E | data1 [ 650.636822] iwlwifi 0000:00:14.3: 0x00001000 | data2 [ 650.636825] iwlwifi 0000:00:14.3: 0xF0000008 | data3 [ 650.636828] iwlwifi 0000:00:14.3: 0x00000000 | beacon time [ 650.636831] iwlwifi 0000:00:14.3: 0x000395B6 | tsf low [ 650.636834] iwlwifi 0000:00:14.3: 0x00000000 | tsf hi [ 650.636837] iwlwifi 0000:00:14.3: 0x00000000 | time gp1 [ 650.636840] iwlwifi 0000:00:14.3: 0x000395B6 | time gp2 [ 650.636860] iwlwifi 0000:00:14.3: 0x00000001 | uCode revision type [ 650.636863] iwlwifi 0000:00:14.3: 0x0000002E | uCode version major [ 650.636866] iwlwifi 0000:00:14.3: 0x6BF1DF06 | uCode version minor [ 650.636869] iwlwifi 0000:00:14.3: 0x00000312 | hw version [ 650.636872] iwlwifi 0000:00:14.3: 0x18C89008 | board version [ 650.636875] iwlwifi 0000:00:14.3: 0x001D0177 | hcmd [ 650.636878] iwlwifi 0000:00:14.3: 0x20122080 | isr0 [ 650.636881] iwlwifi 0000:00:14.3: 0x00000000 | isr1 [ 650.636884] iwlwifi 0000:00:14.3: 0x08001802 | isr2 [ 650.636887] iwlwifi 0000:00:14.3: 0x404001C0 | isr3 [ 650.636889] iwlwifi 0000:00:14.3: 0x00000000 | isr4 [ 650.636892] iwlwifi 0000:00:14.3: 0x001D0177 | last cmd Id [ 650.636895] iwlwifi 0000:00:14.3: 0x0001A83E | wait_event [ 650.636898] iwlwifi 0000:00:14.3: 0x00000000 | l2p_control [ 650.636901] iwlwifi 0000:00:14.3: 0x00000820 | l2p_duration [ 650.636904] iwlwifi 0000:00:14.3: 0x00000000 | l2p_mhvalid [ 650.636907] iwlwifi 0000:00:14.3: 0x00000000 | l2p_addr_match [ 650.636910] iwlwifi 0000:00:14.3: 0x0000000D | lmpm_pmg_sel [ 650.636913] iwlwifi 0000:00:14.3: 0x08081425 | timestamp [ 650.636916] iwlwifi 0000:00:14.3: 0x0000183C | flow_handler [ 650.636953] iwlwifi 0000:00:14.3: Start IWL Error Log Dump: [ 650.636956] iwlwifi 0000:00:14.3: Status: 0x00000050, count: 7 [ 650.636959] iwlwifi 0000:00:14.3: 0x20000034 | NMI_INTERRUPT_WDG [ 650.636962] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1 [ 650.636965] iwlwifi 0000:00:14.3: 0xC008885E | umac branchlink2 [ 650.636968] iwlwifi 0000:00:14.3: 0x80454D04 | umac interruptlink1 [ 650.636971] iwlwifi 0000:00:14.3: 0xC00842AC | umac interruptlink2 [ 650.636974] iwlwifi 0000:00:14.3: 0x00000400 | umac data1 [ 650.636977] iwlwifi 0000:00:14.3: 0xC00842AC | umac data2 [ 650.636980] iwlwifi 0000:00:14.3: 0xDEADBEEF | umac data3 [ 650.636983] iwlwifi 0000:00:14.3: 0x0000002E | umac major [ 650.636986] iwlwifi 0000:00:14.3: 0x6BF1DF06 | umac minor [ 650.636989] iwlwifi 0000:00:14.3: 0x0003959E | frame pointer [ 650.636992] iwlwifi 0000:00:14.3: 0xC0886B5C | stack pointer [ 650.636995] iwlwifi 0000:00:14.3: 0x001E010C | last host cmd [ 650.636998] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg [ 650.637017] iwlwifi 0000:00:14.3: Fseq Registers: [ 650.637025] iwlwifi 0000:00:14.3: 0x5CAAF71A | FSEQ_ERROR_CODE [ 650.637034] iwlwifi 0000:00:14.3: 0x00000000 | FSEQ_TOP_INIT_VERSION [ 650.637042] iwlwifi 0000:00:14.3: 0x48E767D9 | FSEQ_CNVIO_INIT_VERSION [ 650.637051] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION [ 650.637060] iwlwifi 0000:00:14.3: 0xBDFB20C4 | FSEQ_TOP_CONTENT_VERSION [ 650.637068] iwlwifi 0000:00:14.3: 0xC098A1DF | FSEQ_ALIVE_TOKEN [ 650.637077] iwlwifi 0000:00:14.3: 0x247AF0C2 | FSEQ_CNVI_ID [ 650.637085] iwlwifi 0000:00:14.3: 0x3AE78660 | FSEQ_CNVR_ID [ 650.637094] iwlwifi 0000:00:14.3: 0x01000100 | CNVI_AUX_MISC_CHIP [ 650.637105] iwlwifi 0000:00:14.3: 0x00000201 | CNVR_AUX_MISC_CHIP [ 650.637115] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM [ 650.637157] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR [ 650.637166] iwlwifi 0000:00:14.3: Firmware error during reconfiguration - reprobe! [ 650.637199] iwlwifi 0000:00:14.3: LED command failed: -5 [ 650.637219] iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD [ 650.637240] CPU: 3 PID: 1437 Comm: NetworkManager Kdump: loaded Not tainted 4.18.0-193.6.3.el8_2.x86_64 #1 [ 650.637241] iwlwifi 0000:00:14.3: LED command failed: -5 [ 650.637244] Hardware name: Dell Inc. Vostro 5481/0PK27Y, BIOS 1.0.0 09/05/2018 [ 650.637245] Call Trace: [ 650.637256] dump_stack+0x5c/0x80 [ 650.637275] iwl_trans_pcie_send_hcmd+0x370/0x380 [iwlwifi] [ 650.637284] ? finish_wait+0x80/0x80 [ 650.637300] iwl_trans_send_cmd+0x5b/0xc0 [iwlwifi] [ 650.637318] iwl_mvm_send_cmd+0x1b/0x40 [iwlmvm] [ 650.637337] iwl_mvm_legacy_config_scan+0x274/0x440 [iwlmvm] [ 650.637353] iwl_mvm_config_scan+0xec/0x100 [iwlmvm] [ 650.637366] iwl_mvm_up+0x89a/0xa60 [iwlmvm] [ 650.637379] __iwl_mvm_mac_start+0x26/0x1d0 [iwlmvm] [ 650.637391] iwl_mvm_mac_start+0x23/0x40 [iwlmvm] [ 650.637423] drv_start+0x43/0x100 [mac80211] [ 650.637460] ieee80211_do_open+0x251/0x900 [mac80211] [ 650.637466] __dev_open+0xcd/0x160 [ 650.637471] __dev_change_flags+0x1ad/0x220 [ 650.637475] dev_change_flags+0x21/0x60 [ 650.637480] do_setlink+0x314/0xe90 [ 650.637484] ? update_curr+0x70/0x1c0 [ 650.637489] ? cpumask_next_and+0x1a/0x20 [ 650.637493] ? __nla_validate_parse+0x51/0x840 [ 650.637497] ? cpumask_next+0x17/0x20 [ 650.637502] ? __snmp6_fill_stats64.isra.56+0x6b/0x110 [ 650.637505] ? __nla_validate_parse+0x51/0x840 [ 650.637510] __rtnl_newlink+0x53d/0x890 [ 650.637515] ? __nla_reserve+0x38/0x50 [ 650.637521] ? security_sock_rcv_skb+0x2a/0x40 [ 650.637527] ? sk_filter_trim_cap+0x49/0x230 [ 650.637533] ? netlink_attachskb+0x1b0/0x1e0 [ 650.637537] ? skb_queue_tail+0x1b/0x50 [ 650.637541] ? __netlink_sendskb+0x51/0x70 [ 650.637553] ? filename_lookup.part.63+0xd3/0x170 [ 650.637559] ? _cond_resched+0x15/0x30 [ 650.637563] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 650.637568] rtnl_newlink+0x43/0x60 [ 650.637572] rtnetlink_rcv_msg+0x200/0x2f0 [ 650.637576] ? rtnl_calcit.isra.35+0x110/0x110 [ 650.637581] netlink_rcv_skb+0x4c/0x120 [ 650.637587] netlink_unicast+0x19e/0x260 [ 650.637593] netlink_sendmsg+0x204/0x3d0 [ 650.637598] sock_sendmsg+0x4c/0x50 [ 650.637602] ___sys_sendmsg+0x29f/0x300 [ 650.637608] ? try_to_wake_up+0x54/0x570 [ 650.637613] ? __check_object_size+0xa8/0x16b [ 650.637617] ? wake_up_q+0x70/0x70 [ 650.637623] ? __wake_up_common+0x7a/0x190 [ 650.637629] __sys_sendmsg+0x57/0xa0 [ 650.637635] do_syscall_64+0x5b/0x1a0 [ 650.637640] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 650.637644] RIP: 0033:0x7f21aecdeb07 [ 650.637649] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 eb ec ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 24 ed ff ff 48 [ 650.637651] RSP: 002b:00007fffaa691d60 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 650.637655] RAX: ffffffffffffffda RBX: 000000000000000e RCX: 00007f21aecdeb07 [ 650.637657] RDX: 0000000000000000 RSI: 00007fffaa691db0 RDI: 000000000000000e [ 650.637658] RBP: 00007fffaa691db0 R08: 0000000000000000 R09: 0000000000000000 [ 650.637660] R10: 0000000000000012 R11: 0000000000000293 R12: 0000000000000000 [ 650.637662] R13: 0000000000000000 R14: 00007fffaa691f68 R15: 00007fffaa691f5c [ 650.722207] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM [ 650.722209] iwlwifi 0000:00:14.3: Found debug configuration: 0 [ 650.722634] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm [ 650.722653] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318 [ 650.729579] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM [ 650.729914] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor. [ 650.770224] iwlwifi 0000:00:14.3: base HW address: a0:a4:c5:dd:0c:52 [ 650.814071] ieee80211 phy645: Selected rate control algorithm 'iwl- mvm-rs' [ 650.822074] thermal thermal_zone8: failed to read out thermal zone (-61) [ 650.835672] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 650.850976] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready

1 0

CentOS-announce Digest, Vol 184, Issue 6
by centos-announce-request＠centos.org 16 Jun '20

16 Jun '20

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Release for CentOS Linux 8 (2004) (Brian Stinson) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Jun 2020 11:29:32 -0500 From: Brian Stinson <bstinson(a)centosproject.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] Release for CentOS Linux 8 (2004) Message-ID: <1491307c-4a76-1bc2-7375-9c85cdff3214(a)centosproject.org> Content-Type: text/plain; charset=utf-8 Release for CentOS Linux 8 (2004) We are pleased to announce the general availability of CentOS Linux 8. Effectively immediately, this is the current release for CentOS Linux 8 and is tagged as 2004, derived from Red Hat Enterprise Linux 8.2 Source Code. As always, read through the Release Notes at : http://wiki.centos.org/Manuals/ReleaseNotes/CentOS8.2004? - these notes contain important information about the release and details about some of the content inside the release from the CentOS QA team. These notes are updated constantly to include issues and incorporate feedback from the users. ---------- Updates, Sources, and DebugInfos Updates released since the upstream release are all posted, across all architectures. We strongly recommend every user apply all updates, including the content released today, on your existing CentOS Linux 8 machine by just running 'dnf update'. As with all CentOS Linux 8 components, this release was built from sources hosted at git.centos.org. Sources will be available from vault.centos.org in their own dedicated directories to match the corresponding binary RPMs. Since there is far less traffic to the CentOS source RPMs compared with the binary RPMs, we are not putting this content on the main mirror network. If users wish to mirror this content they can do so using the reposync command available in the yum/dnf-utils package. All CentOS source RPMs are signed with the same key used to sign their binary counterparts. Developers and end users looking at inspecting and contributing patches to the CentOS Linux distro will find the code hosted at git.centos.org far simpler to work against. Details on how to best consume those are documented along with a quick start at : http://wiki.centos.org/Sources Debuginfo packages have been signed and pushed. Yum configs shipped in the new release file will have all the context required for debuginfo to be available on every CentOS Linux install. This release supersedes all previously released content for CentOS Linux 8, and therefore we highly encourage all users to upgrade their machines. Information on different upgrade strategies and how to handle stale content is included in the Release Notes. Note that older content, obsoleted by newer versions of the same applications are trim'd off from repos like extras/ and centosplus/ ---------- Download We produced the following installer images for CentOS Linux 8 # CentOS-8.2.2004-x86_64-minimal.iso: 1718616064 bytes SHA256 (CentOS-8.2.2004-x86_64-minimal.iso) = 47ab14778c823acae2ee6d365d76a9aed3f95bb8d0add23a06536b58bb5293c0 # CentOS-8.2.2004-x86_64-boot.iso: 654311424 bytes SHA256 (CentOS-8.2.2004-x86_64-boot.iso) = c67876a5602faa17f68b40ccf2628799b87454aa67700f0f57eec15c6ccdd98c # CentOS-8.2.2004-x86_64-dvd1.iso: 8231321600 bytes SHA256 (CentOS-8.2.2004-x86_64-dvd1.iso) = c87a2d81d67bbaeaf646aea5bedd70990078ec252fc52f5a7d65ff609871e255 # CentOS-8.2.2004-aarch64-minimal.iso: 1410226176 bytes SHA256 (CentOS-8.2.2004-aarch64-minimal.iso) = 621d08902bfd7ca8437cd536b86631c87ddc3e36a530abc77011d230401eb158 # CentOS-8.2.2004-aarch64-boot.iso: 579823616 bytes SHA256 (CentOS-8.2.2004-aarch64-boot.iso) = 76a9a5f84ac9581fee079d7154bf68f72661c9d941e9ab3143bccc760c23eecc # CentOS-8.2.2004-aarch64-dvd1.iso: 5988872192 bytes SHA256 (CentOS-8.2.2004-aarch64-dvd1.iso) = 9d2f066edfc3820fc9e4c6d52f01489a3ed57515cf608773e2b8a04f1903c838 # CentOS-8.2.2004-ppc64le-minimal.iso: 1493422080 bytes SHA256 (CentOS-8.2.2004-ppc64le-minimal.iso) = 1d6802ce5581bd6ae22d13e491dfad65b7a32166f1484e8d6c532cd4cd7e18db # CentOS-8.2.2004-ppc64le-boot.iso: 628408320 bytes SHA256 (CentOS-8.2.2004-ppc64le-boot.iso) = a039bc592e416b97914b6c99cc8cb070d6b35742dbcb7b6eccff55291659c664 # CentOS-8.2.2004-ppc64le-dvd1.iso: 7080738816 bytes SHA256 (CentOS-8.2.2004-ppc64le-dvd1.iso) = 1a94eff60fd016ea8efb1d592eda85f0b5edde2ff2ad4c77db546ab90392421e Information for the torrent files and sums are available at http://mirror.centos.org/centos/8/isos/ -------- Additional Images Vagrant and Generic Cloud images are available at: http://cloud.centos.org/centos/8/ Amazon Machine Images for Amazon Web Services are published by ID into a number of regions. A table of AMI IDs can be found here: https://wiki.centos.org/Cloud/AWS ---------- Getting Help The CentOS ecosystem is sustained by community driven help and guidance. The best place to start for new users is at http://wiki.centos.org/GettingHelp We are also on social media, you can find the project: on Twitter at? :http://twitter.com/CentOSProject on Facebook at :https://www.facebook.com/groups/centosproject/ on LinkedIn at :https://www.linkedin.com/groups/22405 And you will find the core team and a majority of the contributors on irc, on freenode.net in #centos ; talking about the finer points of distribution engineering and platform enablement. ---------- Contributors This release was made possible due to the hard work of many people, foremost on that list are the Red Hat Engineers for producing a great distribution and the CentOS QA team, without them CentOS Linux would look very different. Many of the team went further and beyond expectations to bring this release to you, and I would like to thank everyone for their help. We are also looking for people to get involved with the QA process in CentOS, if you would like to join this please introduce yourself on the centos-devel list (http://lists.centos.org/mailman/listinfo/centos-devel? ). Finally, please join me in thanking the donors who all make this possible for us. Enjoy the fresh new release! Thanks, Brian Stinson ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 184, Issue 6 ***********************************************

1 0

smb protocol version
by Christopher Wensink 16 Jun '20

16 Jun '20

I have a handful of Linux Servers, running Centos 6.10, and 6.8 with the main host running openvz w/ Centos 6.10 as the main OS. Two of the guests are running samba, sharing directories out to windows clients. I'm in the process of migrating servers over to vmware, using Centos 7.8. How can I determine what smb protocol version is being used in the shares for each server? I don't see the protocol specified anywhere in smb.conf? Chris

4 4

Re: [CentOS] C8 install problems SOLVED
by ejm 15 Jun '20

15 Jun '20

I burned a total of 7.55Gb from an ISO image to a dual-layer HP DVD+R disc. I got a bootable USB stick containing 8.1 and it's 7.65 Gb so apparently my ISO image file is messed up. I was able to install C8 just fine from the USB stick, so marking this as solved. Thanks, --Ed

1 0

/etc/networks file
by Jay Hart 15 Jun '20

15 Jun '20

I am having some network connectivity issues that manifest itself through ping, wget, dnf, etc. The symptoms are intermittent ability to ping, was wget, or connect to repositories. Where this inquiry is going is: If your internal network is using 192.168.1 or 10..50.10, what should be in /etc/networks. My current file contains: default 0.0.0.0 loopback 127.0.0.0 link-local 169.254.0.0 And I'm pretty sure this is the default OS installed contents. I don't think this is related to my connectivity issue, just curious about what this file does. My old server (which is working just fine) has the same content in its /etc/networks file so not configuring this does not seem to matter one way or the other. If one were using 192.168.1.x network , assume 'default' should be 192.168.1.0. 'Link-local' should match??? Thanks, Jay

4 4

halt versus shutdown
by Leon Fauster 15 Jun '20

15 Jun '20

Working with different OSs can be quite challenging (mentally :-)). I wonder why the command "halt" has not same result between EL6 and EL8. To shutdown the vm or workstation in EL8 i must use "shutdown now". Who mandates this behavior in terms of configuration file? -- Leon

6 10

Modifying username
by Jay Hart 15 Jun '20

15 Jun '20

I modified a users name on my system. From ABCLast, to ALast (used as an example). I modified the username, then the group name of the user (to align with the new name), and then I moved the users home directory from /home/ABCLast, to /home/ALast. Then using vipw, edited the home directory to use /home/ALast. When I got finished editing the passwd file, I got the following message: You have modified /etc/passwd. You may need to modify /etc/shadow for consistency. I don't know what to do here. Need some guidance please. lastly, did I miss anything here? Any other steps I need to do to get this user squared away due to the name change? Thanks, Jay

6 7

pppoe
by Joe 12 Jun '20

12 Jun '20

Hello, CentOS 8 dropped the rp-pppoe package. My attempts with NetworkManager-ppp already failed because it seems that it is not possible to use a VLAN as a device. Please, how does it work under C8 to set up a pppoe connection (German Telekom, VDSL (VLAN 7 required), ZTE modem). Thanks. Joe

2 1

← Newer
1
2
3
4
5
6
7
8
9
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss June 2020