Discuss July 2021

discuss@lists.centos.org

69 participants
38 discussions

Sending mail from rkhunter
by H 08 Jul '21

08 Jul '21

I am having problems getting rkhunter to send the daily report to an outside email account under CentOS 7. I have installed postfix and fail2ban now sends ban messages as expected. I have googled but so far failed to identify the error in my setup: - /etc/aliases contain the correct mail alias for root - /etc/rkhunter.conf has REPORT_EMAIL=themailadress and MAIL-ON-WARNING=themailadress - /var/log/rkhunter/rkhunter.log does not contain any error messages What have I missed?

1 0

Problems with CentOS 8 kickstart
by Hooton, Gerard 07 Jul '21

07 Jul '21

Hi All, I am having problems with a kickstart install of CentOS 8 When I try to do a completely automated install using PXE/UEFI it get to the point where it reads the kickstart config file. Then I see the following message "kickstart install Started cancel waiting for multipath siblings for nvme0n1" This is what I have in the kickstart file # Clear the Master Boot Record zerombr # Partition clearing information clearpart --all --initlabel autopart --nohome --type=lvm --fstype=xfs ================ When I install from a USB drive it works OK and I have the following in /dev/disk/by-id lrwxrwxrwx. 1 root root 13 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810 -> ../../nvme0n1 lrwxrwxrwx. 1 root root 13 Jul 5 10:28 nvme-eui.002538b11102f46d -> ../../nvme0n1 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 wwn-eui.002538b11102f46d-part3 -> ../../nvme0n1p3 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810-part3 -> ../../nvme0n1p3 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-eui.002538b11102f46d-part3 -> ../../nvme0n1p3 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 lvm-pv-uuid-5Dg4mg-saHa-hJJ6-n5a8-MxBS-gdFi-5jPoNn -> ../../nvme0n1p3 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 wwn-eui.002538b11102f46d-part2 UNG_MZVL2512HCJQ-0-> ../../nvme0n1p2 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810-part2 -> ../../nvme0n1p2 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-eui.002538b11102f46d-part2 -> ../../nvme0n1p2 drwxr-xr-x. 2 root root 400 Jul 5 10:28 . lrwxrwxrwx. 1 root root 15 Jul 5 10:28 wwn-eui.002538b11102f46d-part1 -> ../../nvme0n1p1 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-SAMSUNG_MZVL2512HCJQ-00BL7_S64KNE0R161810-part1 -> ../../nvme0n1p1 lrwxrwxrwx. 1 root root 15 Jul 5 10:28 nvme-eui.002538b11102f46d-part1 -> ../../nvme0n1p1 lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-uuid-LVM-qQok4M7AOo1TxZZ42GwZcbuVNBs0hnkKtEdtLjwJQyIdxJcSvPv8TEAjwYGMv6yU -> ../../dm-0 lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-uuid-LVM-qQok4M7AOo1TxZZ42GwZcbuVNBs0hnkKAooqrczySYJyiHvUAUji9oScPN2cVi7J -> ../../dm-1 lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-name-cs_uews027-swap -> ../../dm-1 lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-name-cs_uews027-root -> ../../dm-0 lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-uuid-LVM-qQok4M7AOo1TxZZ42GwZcbuVNBs0hnkK5HZXbR2ow5xKGuD7jVe4UPzZm2qRLLXI -> ../../dm-2 lrwxrwxrwx. 1 root root 10 Jul 5 11:07 dm-name-cs_uews027-home -> ../../dm-2 It's looks like that I am not doing the disk drive stuff in the config file correctly. -- Gerard Hooton. Senior Technical Officer School of Engineering. University College Cork. College Road. Cork. Ireland. Loc8: WDR-04-60G Tel: +353 21 4902296 Mobile: +353 852813491

2 6

Re: [CentOS] CentOS Digest, Vol 198, Issue 6
by Anand Babu 07 Jul '21

07 Jul '21

Hi Leon, Thanks a lot for taking a look at my test and the suggestion. We have tested this suggestion echo never > /sys/kernel/mm/transparent_hugepage/enabled Unfortunately, the Ram usage was the same with this option changed as well. Just to give some additional context to the original question to all, We see 10-25 percent more RSS on CentOS 8 ( as compared to CentOS 7) for the same Java vm process that we are benchmarking . And in that case , the RSS growth for the executable and the shared library of our application is considerably higher. Perhaps, for the big server use cases the rss growth did not matter, but for us, we are trying to use it in an embedded scenario and this is a major issue. We will be glad to hear any further suggestions/ tests that we could check to further understand the differences between the 2 versions. Regards, -Anand On Wed, Jul 7, 2021, 5:30 PM <centos-request(a)centos.org> wrote: > Send CentOS mailing list submissions to > centos(a)centos.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.centos.org/mailman/listinfo/centos > or, via email, send a message with subject or body 'help' to > centos-request(a)centos.org > > You can reach the person managing the list at > centos-owner(a)centos.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CentOS digest..." > > > Today's Topics: > > 1. RSS usage on centos8.4 is higher for user-application > compared to centos7.9 (Anand Babu) > 2. Re: RSS usage on centos8.4 is higher for user-application > compared to centos7.9 (Leon Fauster) > 3. Re: Centos versions in the future? (Nikolaos Milas) > 4. Re: Centos versions in the future? (J Martin Rushton) > 5. Re: Centos versions in the future? (Nikolaos Milas) > 6. Re: Centos versions in the future? (Leon Fauster) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 6 Jul 2021 15:02:49 +0200 > From: Anand Babu <mail2anand(a)gmail.com> > To: centos(a)centos.org > Subject: [CentOS] RSS usage on centos8.4 is higher for > user-application compared to centos7.9 > Message-ID: > <CAB5++c4-Z= > 7FheHD02RW6YLP6d-trwCqqQqvDdAKsoBZF4tbUg(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Hi Centos Community, > > This is my first time here and I apologize in advance if I made a mistake > here and hope you will correct me , if i made any. > > > With that said, > > This is a native example that was written to narrow down the higher RAM > usage that we see when we are using Centos8 as opposed to Centos7. > > The c-code is very small and looks like this : > > #include<stdio.h> > > #include<unistd.h> > > int main() > > { > > pause(); > > return 0; > > } > > I compile and run the binary on centos7 and memory backed section of pmap > output looks like below: > > pmap -X $(pidof sleep) | head -n -2 | awk '{ if (NR > 2 && $5 > 0 ) > printf "%12s %8s %8s %4s %s\n", $1, $6, $7, $2,$13}' > 00400000 4 4 r-xp sleep > 00600000 4 4 r--p sleep > 00601000 4 4 rw-p sleep*7f54514f9000 1808 > 204 r-xp libc-2.17.so <http://libc-2.17.so> > *7f54516bd000 2044 0 ---p libc-2.17.so > 7f54518bc000 16 16 r--p libc-2.17.so > 7f54518c0000 8 8 rw-p libc-2.17.so > 7f54518c7000 136 108 r-xp ld-2.17.so > 7f5451ae8000 4 4 r--p ld-2.17.so > 7f5451ae9000 4 4 rw-p ld-2.17.so > > and ps says the following: > > ** ps -o rss= pidof sleep 352** > > Running the same binary on centos8 leads to > > ** ps -o rss= pidof pause 784 ** > > and the pmap output looks like below: > > 00400000 4 4 r-xp pause > 00600000 4 4 r--p pause > 00601000 4 4 rw-p pause* 7f24029a8000 1776 > 788 r-xp libc-2.28.so <http://libc-2.28.so> * > 7f2402b64000 2044 0 ---p libc-2.28.so > 7f2402d63000 16 16 r--p libc-2.28.so > 7f2402d67000 8 8 rw-p libc-2.28.so > 7f2402d6d000 176 176 r-xp ld-2.28.so > 7f2402f99000 4 4 r--p ld-2.28.so > 7f2402f9a000 8 8 rw-p ld-2.28.so > > For running the same executable, the libc.so takes 788KB(204KB on centos7). > > Note: > > 1. > > This is not the only library that is showing this behavior, but we see > the same behavior for other shared-library as well as executables that > were > compiled on centos7. Running the same executables/shared objects take a > higher amount of pages on centos8 than on centos7. > 2. > > Since the glibc version on Centos8 was 2.28 , i have compiled 2.17 > version and then used patchelf to patch the centos7 built binary to make > use of 2.17 glibc on centos8 host like patchelf --set-interpreter > > > /home/babu/RSS_measurement/2_17_downloaded/glibc_home/lib/ld-linux-x86-64.so.2 > --set-rpath /home/babu/RSS_measurement/2_17_downloaded/glibc_home/lib > /tmp/pause > > and then run it under LD_DEBUG=libs and verified the 2.17 version of libc > libraries were used and still the memory usage on centos8 was higher than > on centos7 (about the same numbers as above). > > What could be the reason for the higher RAM usage on centos8 vs centos7? I > can imagine some defaults have changed on centos8 and that has meant this > impact and i could change this default and could reproduce the same RSS > numbers on centos8 as well? > > > I am posting my environment details in the P.S below. > > Regards, > > -Anand > > > P.S: > > cat /etc/centos-release > > CentOS Linux release 8.4.2105 > > [root@localhost RSS_measurement]# cat /etc/centos-release > > CentOS Linux release 7.9.2009 (Core) > > I am running both the centos versions under Virtualbox. > > > ------------------------------ > > Message: 2 > Date: Tue, 6 Jul 2021 17:59:11 +0200 > From: Leon Fauster <leonfauster(a)googlemail.com> > To: centos(a)centos.org > Subject: Re: [CentOS] RSS usage on centos8.4 is higher for > user-application compared to centos7.9 > Message-ID: <4e84ea30-9d8b-2e9d-a898-e469303a537c(a)gmail.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 06.07.21 15:02, Anand Babu wrote: > > Hi Centos Community, > > > > This is my first time here and I apologize in advance if I made a mistake > > here and hope you will correct me , if i made any. > > > > > > With that said, > > > > This is a native example that was written to narrow down the higher RAM > > usage that we see when we are using Centos8 as opposed to Centos7. > > > > The c-code is very small and looks like this : > > > > #include<stdio.h> > > > > #include<unistd.h> > > > > int main() > > > > { > > > > pause(); > > > > return 0; > > > > } > > > > I compile and run the binary on centos7 and memory backed section of pmap > > output looks like below: > > > > pmap -X $(pidof sleep) | head -n -2 | awk '{ if (NR > 2 && $5 > 0 ) > > printf "%12s %8s %8s %4s %s\n", $1, $6, $7, $2,$13}' > > 00400000 4 4 r-xp sleep > > 00600000 4 4 r--p sleep > > 00601000 4 4 rw-p sleep*7f54514f9000 1808 > > 204 r-xp libc-2.17.so <http://libc-2.17.so> > > *7f54516bd000 2044 0 ---p libc-2.17.so > > 7f54518bc000 16 16 r--p libc-2.17.so > > 7f54518c0000 8 8 rw-p libc-2.17.so > > 7f54518c7000 136 108 r-xp ld-2.17.so > > 7f5451ae8000 4 4 r--p ld-2.17.so > > 7f5451ae9000 4 4 rw-p ld-2.17.so > > > > and ps says the following: > > > > ** ps -o rss= pidof sleep 352** > > > > Running the same binary on centos8 leads to > > > > ** ps -o rss= pidof pause 784 ** > > > > and the pmap output looks like below: > > > > 00400000 4 4 r-xp pause > > 00600000 4 4 r--p pause > > 00601000 4 4 rw-p pause* 7f24029a8000 1776 > > 788 r-xp libc-2.28.so <http://libc-2.28.so> * > > 7f2402b64000 2044 0 ---p libc-2.28.so > > 7f2402d63000 16 16 r--p libc-2.28.so > > 7f2402d67000 8 8 rw-p libc-2.28.so > > 7f2402d6d000 176 176 r-xp ld-2.28.so > > 7f2402f99000 4 4 r--p ld-2.28.so > > 7f2402f9a000 8 8 rw-p ld-2.28.so > > > > For running the same executable, the libc.so takes 788KB(204KB on > centos7). > > > > Note: > > > > 1. > > > > This is not the only library that is showing this behavior, but we > see > > the same behavior for other shared-library as well as executables > that were > > compiled on centos7. Running the same executables/shared objects > take a > > higher amount of pages on centos8 than on centos7. > > 2. > > > > Since the glibc version on Centos8 was 2.28 , i have compiled 2.17 > > version and then used patchelf to patch the centos7 built binary to > make > > use of 2.17 glibc on centos8 host like patchelf --set-interpreter > > > > > /home/babu/RSS_measurement/2_17_downloaded/glibc_home/lib/ld-linux-x86-64.so.2 > > --set-rpath /home/babu/RSS_measurement/2_17_downloaded/glibc_home/lib > > /tmp/pause > > > > and then run it under LD_DEBUG=libs and verified the 2.17 version of libc > > libraries were used and still the memory usage on centos8 was higher than > > on centos7 (about the same numbers as above). > > > > What could be the reason for the higher RAM usage on centos8 vs centos7? > I > > can imagine some defaults have changed on centos8 and that has meant this > > impact and i could change this default and could reproduce the same RSS > > numbers on centos8 as well? > > > > > > How does the results look like after doing: > > echo never > /sys/kernel/mm/transparent_hugepage/enabled > > -- > Leon > > > > ------------------------------ > > Message: 3 > Date: Wed, 7 Jul 2021 12:44:15 +0300 > From: Nikolaos Milas <nmilas(a)noa.gr> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] Centos versions in the future? > Message-ID: <6b3c136f-5aae-1b0a-e65c-868377875f7a(a)noa.gr> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 30/4/2021 7:27 ?.?., Gionatan Danti wrote: > > > > > The correct answer is to buy RH: fine. But do not let Stream touch > > anything which require a kABI compatible modules. As said above, the > > Stream move is squarely addresses *cloud* vendor requests and needs. > > Again, fine. But please leave apart the RH comparison, this is not > > going to help Stream. > > > > Again, don't let me wrong: I wishes the best to Stream, and I will use > > it where appropriate. But "where" is much smaller today than > > yesterday. But this aside, I really thank you all CentOS maintainer > > for your monumental work, and I really hope Stream will be a success. > > I re-visit this thread, since it is crucial for CentOS 8 users. > > RESF / Rocky Linux is gaining worldwide recognition and sets itself as > the primary organization / platform to become the CentOS 8 heir / > successor in the future. > > Google and Microsoft become RESF sponsors/partners: > > https://rockylinux.org/news/community-update-june-2021/ > > And so IBM/RH lose the tremendous advantage they had by owning the > CentOS project, which - it seems - never evaluated correctly. > > From now on, it is clear that hundreds of thousands of CentOS > installations will be migrating to Rocky Linux. > > I also wish the best of success to CentOS Stream, but this is not what > the CentOS community expected. > > My 2c. > Nick > > > > ------------------------------ > > Message: 4 > Date: Wed, 7 Jul 2021 10:47:16 +0100 > From: J Martin Rushton <martinrushton56(a)btinternet.com> > To: centos(a)centos.org > Subject: Re: [CentOS] Centos versions in the future? > Message-ID: <e6298010-bece-df14-98d0-9f8b5e04e8e2(a)btinternet.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > There's also Alma, which is where I've gone after being with CentOS > since 5.3 > > On 07/07/2021 10:44, Nikolaos Milas wrote: > > On 30/4/2021 7:27 ?.?., Gionatan Danti wrote: > > > >> > >> The correct answer is to buy RH: fine. But do not let Stream touch > >> anything which require a kABI compatible modules. As said above, the > >> Stream move is squarely addresses *cloud* vendor requests and needs. > >> Again, fine. But please leave apart the RH comparison, this is not > >> going to help Stream. > >> > >> Again, don't let me wrong: I wishes the best to Stream, and I will use > >> it where appropriate. But "where" is much smaller today than > >> yesterday. But this aside, I really thank you all CentOS maintainer > >> for your monumental work, and I really hope Stream will be a success. > > > > I re-visit this thread, since it is crucial for CentOS 8 users. > > > > RESF / Rocky Linux is gaining worldwide recognition and sets itself as > > the primary organization / platform to become the CentOS 8 heir / > > successor in the future. > > > > Google and Microsoft become RESF sponsors/partners: > > > > ?? https://rockylinux.org/news/community-update-june-2021/ > > > > And so IBM/RH lose the tremendous advantage they had by owning the > > CentOS project, which - it seems - never evaluated correctly. > > > > From now on, it is clear that hundreds of thousands of CentOS > > installations will be migrating to Rocky Linux. > > > > I also wish the best of success to CentOS Stream, but this is not what > > the CentOS community expected. > > > > My 2c. > > Nick > > > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > https://lists.centos.org/mailman/listinfo/centos > > -- > J Martin Rushton MBCS > > > ------------------------------ > > Message: 5 > Date: Wed, 7 Jul 2021 13:07:12 +0300 > From: Nikolaos Milas <nmilas(a)noa.gr> > To: CentOS mailing list <centos(a)centos.org> > Subject: Re: [CentOS] Centos versions in the future? > Message-ID: <ce7e72f7-7159-78ee-4576-e75e806025f7(a)noa.gr> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 7/7/2021 12:47 ?.?., J Martin Rushton via CentOS wrote: > > > There's also Alma, which is where I've gone after being with CentOS > > since 5.3 > > AlmaLinux is a great project too, IMHO, but things show that the new > industry standard (replacing CentOS) will probably be Rocky Linux. > > (Yes, RHEL **AND** CentOS have indeed been industry standards - the > point of reference -, IMHO, and this is what IBM/RHEL have failed to > realize: You don't alter a point of reference.) > > It is interesting to see what Service Providers will do with their (huge > numbers of) CentOS installations, when they migrate... > > From the users/admins' perspective it is to their interest to have > robust and healthy alternatives. > > In our org, I am now using Rocky Linux on new installations (without > issues) and will be migrating several CentOS 8 boxes to Rocky Linux as > well. > > Cheers, > Nick > > > > ------------------------------ > > Message: 6 > Date: Wed, 7 Jul 2021 12:28:58 +0200 > From: Leon Fauster <leonfauster(a)googlemail.com> > To: centos(a)centos.org > Subject: Re: [CentOS] Centos versions in the future? > Message-ID: <9d2d8304-6779-a452-1a8b-62c58d7722e1(a)gmail.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 07.07.21 12:07, Nikolaos Milas wrote: > > On 7/7/2021 12:47 ?.?., J Martin Rushton via CentOS wrote: > > > >> There's also Alma, which is where I've gone after being with CentOS > >> since 5.3 > > > > AlmaLinux is a great project too, IMHO, but things show that the new > > industry standard (replacing CentOS) will probably be Rocky Linux. > > > > (Yes, RHEL **AND** CentOS have indeed been industry standards - the > > point of reference -, IMHO, and this is what IBM/RHEL have failed to > > realize: You don't alter a point of reference.) > > > It should not be forgotten that Rocky Linux will be a 1:1 rebuild, also > in the future. So, to shape this future everyone is invited to > participate at CentOS Stream. This is a great future or not? > > > > > It is interesting to see what Service Providers will do with their (huge > > numbers of) CentOS installations, when they migrate... > > > > From the users/admins' perspective it is to their interest to have > > robust and healthy alternatives. > > > > In our org, I am now using Rocky Linux on new installations (without > > issues) and will be migrating several CentOS 8 boxes to Rocky Linux as > > well. > > > > Cheers, > > Nick > > > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > https://lists.centos.org/mailman/listinfo/centos > > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > https://lists.centos.org/mailman/listinfo/centos > > > ------------------------------ > > End of CentOS Digest, Vol 198, Issue 6 > ************************************** >

1 0

RSS usage on centos8.4 is higher for user-application compared to centos7.9
by Anand Babu 06 Jul '21

06 Jul '21

Hi Centos Community, This is my first time here and I apologize in advance if I made a mistake here and hope you will correct me , if i made any. With that said, This is a native example that was written to narrow down the higher RAM usage that we see when we are using Centos8 as opposed to Centos7. The c-code is very small and looks like this : #include<stdio.h> #include<unistd.h> int main() { pause(); return 0; } I compile and run the binary on centos7 and memory backed section of pmap output looks like below: pmap -X $(pidof sleep) | head -n -2 | awk '{ if (NR > 2 && $5 > 0 ) printf "%12s %8s %8s %4s %s\n", $1, $6, $7, $2,$13}' 00400000 4 4 r-xp sleep 00600000 4 4 r--p sleep 00601000 4 4 rw-p sleep*7f54514f9000 1808 204 r-xp libc-2.17.so <http://libc-2.17.so> *7f54516bd000 2044 0 ---p libc-2.17.so 7f54518bc000 16 16 r--p libc-2.17.so 7f54518c0000 8 8 rw-p libc-2.17.so 7f54518c7000 136 108 r-xp ld-2.17.so 7f5451ae8000 4 4 r--p ld-2.17.so 7f5451ae9000 4 4 rw-p ld-2.17.so and ps says the following: ** ps -o rss= pidof sleep 352** Running the same binary on centos8 leads to ** ps -o rss= pidof pause 784 ** and the pmap output looks like below: 00400000 4 4 r-xp pause 00600000 4 4 r--p pause 00601000 4 4 rw-p pause* 7f24029a8000 1776 788 r-xp libc-2.28.so <http://libc-2.28.so> * 7f2402b64000 2044 0 ---p libc-2.28.so 7f2402d63000 16 16 r--p libc-2.28.so 7f2402d67000 8 8 rw-p libc-2.28.so 7f2402d6d000 176 176 r-xp ld-2.28.so 7f2402f99000 4 4 r--p ld-2.28.so 7f2402f9a000 8 8 rw-p ld-2.28.so For running the same executable, the libc.so takes 788KB(204KB on centos7). Note: 1. This is not the only library that is showing this behavior, but we see the same behavior for other shared-library as well as executables that were compiled on centos7. Running the same executables/shared objects take a higher amount of pages on centos8 than on centos7. 2. Since the glibc version on Centos8 was 2.28 , i have compiled 2.17 version and then used patchelf to patch the centos7 built binary to make use of 2.17 glibc on centos8 host like patchelf --set-interpreter /home/babu/RSS_measurement/2_17_downloaded/glibc_home/lib/ld-linux-x86-64.so.2 --set-rpath /home/babu/RSS_measurement/2_17_downloaded/glibc_home/lib /tmp/pause and then run it under LD_DEBUG=libs and verified the 2.17 version of libc libraries were used and still the memory usage on centos8 was higher than on centos7 (about the same numbers as above). What could be the reason for the higher RAM usage on centos8 vs centos7? I can imagine some defaults have changed on centos8 and that has meant this impact and i could change this default and could reproduce the same RSS numbers on centos8 as well? I am posting my environment details in the P.S below. Regards, -Anand P.S: cat /etc/centos-release CentOS Linux release 8.4.2105 [root@localhost RSS_measurement]# cat /etc/centos-release CentOS Linux release 7.9.2009 (Core) I am running both the centos versions under Virtualbox.

2 1

Centos 8 crypto-policy to get SSL Labs A rating
by Adrian Jenzer 05 Jul '21

05 Jul '21

Dear Community I try to get an SSL Labs A rating for my CentOS8 Apache-server. I'am sure it has to do with my lack of understanding the crypto-policies configuration, can anybody give me an advice where i am wrong? My understanding is that the configuration in the pmod-file will override the ssl.conf values if PROFILE=SYSTEM is active. *** # Current runtime policy dump # DEFAULT:HTTPS arbitrary_dh_groups = 1 cipher = AES-256-GCM AES-256-CCM CHACHA20-POLY1305 AES-256-CTR AES-256-CBC AES-128-GCM AES-128-CCM AES-128-CTR AES-128-CBC group = X25519 X448 SECP256R1 SECP384R1 SECP521R1 FFDHE-2048 FFDHE-3072 FFDHE-4096 FFDHE-6144 FFDHE-8192 hash = SHA2-256 SHA2-384 SHA2-512 SHA3-256 SHA3-384 SHA3-512 SHA2-224 SHA1 ike_protocol = IKEv2 key_exchange = ECDHE DHE DHE-RSA DHE-PSK ECDHE-PSK ECDHE-GSS DHE-GSS mac = AEAD HMAC-SHA2-256 HMAC-SHA1 UMAC-128 HMAC-SHA2-384 HMAC-SHA2-512 min_dh_size = 2048 min_dsa_size = 2048 min_dtls_version = DTLS1.2 min_rsa_size = 2048 min_tls_version = TLS1.2 protocol = TLS1.3 TLS1.2 DTLS1.2 sha1_in_certs = 1 sign = ECDSA-SHA3-256 ECDSA-SHA2-256 ECDSA-SHA3-384 ECDSA-SHA2-384 ECDSA-SHA3-512 ECDSA-SHA2-512 EDDSA-ED25519 EDDSA-ED448 RSA-PSS-SHA2-256 RSA-PSS-SHA2-384 RSA-PSS-SHA2-512 RSA-SHA3-256 RSA-SHA2-256 RSA-SHA3-384 RSA-$ ssh_certs = 1 ssh_cipher = AES-256-GCM AES-256-CCM CHACHA20-POLY1305 CAMELLIA-256-GCM AES-256-CTR AES-256-CBC CAMELLIA-256-CBC AES-128-GCM AES-128-CCM CAMELLIA-128-GCM AES-128-CTR AES-128-CBC CAMELLIA-128-CBC ssh_etm = 1 ssh_group = X25519 X448 SECP256R1 SECP384R1 SECP521R1 FFDHE-2048 FFDHE-3072 FFDHE-4096 FFDHE-6144 FFDHE-8192 tls_cipher = AES-256-GCM AES-256-CCM CHACHA20-POLY1305 AES-256-CBC AES-128-GCM AES-128-CCM AES-128-CBC *** cat /etc/crypto-policies/policies/modules/HTTPS.pmod cipher = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384 *** Part of /etc/httpd/conf.d/ssl.conf *** # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # List the protocol versions which clients are allowed to connect with. # The OpenSSL system profile is used by default. See # update-crypto-policies(8) for more details. #SSLProtocol all -SSLv3 #SSLProxyProtocol all -SSLv3 SSLProtocol all -SSLv3 -TLSv1 -TLSv1.1 -TLSv1.2 # User agents such as web browsers are not configured for the user's # own preference of either security or performance, therefore this # must be the prerogative of the web server administrator who manages # cpu load versus confidentiality, so enforce the server's cipher order. SSLHonorCipherOrder on # SSL Cipher Suite: # List the ciphers that the client is permitted to negotiate. # See the mod_ssl documentation for a complete list. # The OpenSSL system profile is configured by default. See # update-crypto-policies(8) for more details. SSLCipherSuite PROFILE=SYSTEM #SSLProxyCipherSuite PROFILE=SYSTEM #SSLCipherSuite HIGH:!aNULL:!MD5 #SSLCipherSuite ECDHE-ECDSA-AES128-GCM-SHA256 Thanks for any hint! Adrian

3 4

BTRFS to ext4
by Christopher Wensink 05 Jul '21

05 Jul '21

Hello Everyone, We have two virtual machines running CentOS 7, one for file sharing and one for email. Both base Filesystems run BTRFS. I need to convert both filesystems over from BTRFS to ext4. Both guest VM's are in a vmware environment on the same server. The file server has 2.8 TB of space total allocated to it, 2.1 TB of total used space The mail server has 2TB allocated to it, and 982 GB of total used space. The host it is attached to has 13.97 TB of total usable space, with 3.4 TB free. What steps would you go through to migrate the file systems over? Would you set up a duplicate VM and rsync data over? Expand the capacity of the existing VM, add a new partition then move data over from one partition to another from within the same VM? What are your thoughts? -- Christopher Wensink IS Administrator Five Star Plastics, Inc 1339 Continental Drive Eau Claire, WI 54701 Office: 715-831-1682 Mobile: 715-563-3112 Fax: 715-831-6075 cwensink(a)five-star-plastics.com www.five-star-plastics.com

3 2

Two directories for 8.4.2105 and 8-stream in the centos mirrors
by Burn Alting 05 Jul '21

05 Jul '21

Recently, it appears that two directories for 8.4 and 8-stream are being distributed in the Centos mirrors. You can't see it if you view the mirrors, but if one downloads the filelist.gz file and grep for '^\.\/\.' one will see the directories, with content, .8.4.2105 and .8-stream. Can this be explained? An error or a new distribution concept?? Rgds

1 0

[C8 stream] update
by Helmut Drodofsky 01 Jul '21

01 Jul '21

Hello, actual, C8 stream update only with exclude platform-python-pip-9.0.3-20.el8.noarch net-snmp* ? -- Viele Grüße Helmut Drodofsky Internet XS Service GmbH Heßbrühlstraße 15 70565 Stuttgart Geschäftsführung Helmut Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Fon: 0711 781941 0 <tel:+497117819410> Fax: 0711 781941 79 Mail: info(a)internet-xs.de www.internet-xs.de

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss July 2021