Hi,
I see some strange and dangerous things happening on a HPE server with HPE
Smart Array controller where EL9 ends up with wrong device nodes/symlinks
to the attached disks/raid volumes:
(I didn't touch anything here but at 08:09 some symlinks were changed)
/dev/disk/by-id/:
lrwxrwxrwx 1 root root 9 Mar 1 07:57 scsi-0HP_LOGICAL_VOLUME_00000000 ->
../../sdc
lrwxrwxrwx 1 root root 10 Mar 1 07:57
scsi-0HP_LOGICAL_VOLUME_00000000-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Mar 1 07:57
scsi-0HP_LOGICAL_VOLUME_00000000-part2 -> ../../sdc2
lrwxrwxrwx 1 root root 9 Mar 1 07:57 scsi-0HP_LOGICAL_VOLUME_01000000 ->
../../sdb
lrwxrwxrwx 1 root root 9 Mar 1 08:09 scsi-0HP_LOGICAL_VOLUME_02000000 ->
../../sda
lrwxrwxrwx 1 root root 9 Mar 1 07:57 scsi-0HP_LOGICAL_VOLUME_03000000 ->
../../sdd
lrwxrwxrwx 1 root root 9 Mar 1 08:09
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 1 07:57
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 10 Mar 1 07:57
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0-part2 -> ../../sdc2
/dev/disk/by-path/:
lrwxrwxrwx 1 root root 9 Mar 1 07:57 pci-0000:03:00.0-scsi-0:1:0:0 ->
../../sdc
lrwxrwxrwx 1 root root 10 Mar 1 07:57 pci-0000:03:00.0-scsi-0:1:0:0-part1
-> ../../sdc1
lrwxrwxrwx 1 root root 10 Mar 1 07:57 pci-0000:03:00.0-scsi-0:1:0:0-part2
-> ../../sdc2
lrwxrwxrwx 1 root root 9 Mar 1 07:57 pci-0000:03:00.0-scsi-0:1:0:1 ->
../../sdb
lrwxrwxrwx 1 root root 9 Mar 1 08:09 pci-0000:03:00.0-scsi-0:1:0:2 ->
../../sda
lrwxrwxrwx 1 root root 9 Mar 1 07:57 pci-0000:03:00.0-scsi-0:1:0:3 ->
../../sdd
After rebooting, the things are different but also wrong:
(here nothing has changed after boot but symlinks are already wrong)
/dev/disk/by-id/:
lrwxrwxrwx 1 root root 9 Mar 1 10:56 scsi-0HP_LOGICAL_VOLUME_00000000
-> ../../sdb
lrwxrwxrwx 1 root root 10 Mar 1 10:56
scsi-0HP_LOGICAL_VOLUME_00000000-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar 1 10:56
scsi-0HP_LOGICAL_VOLUME_00000000-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Mar 1 10:56 scsi-0HP_LOGICAL_VOLUME_01000000
-> ../../sda
lrwxrwxrwx 1 root root 9 Mar 1 10:56 scsi-0HP_LOGICAL_VOLUME_02000000
-> ../../sdd
lrwxrwxrwx 1 root root 9 Mar 1 10:56 scsi-0HP_LOGICAL_VOLUME_03000000
-> ../../sdc
lrwxrwxrwx 1 root root 9 Mar 1 10:56
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0 -> ../../sda
lrwxrwxrwx 1 root root 10 Mar 1 10:56
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar 1 10:56
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0-part2 -> ../../sdb2
/dev/disk/by-path/:
lrwxrwxrwx 1 root root 9 Mar 1 10:56 pci-0000:03:00.0-scsi-0:1:0:0 ->
../../sdb
lrwxrwxrwx 1 root root 10 Mar 1 10:56
pci-0000:03:00.0-scsi-0:1:0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Mar 1 10:56
pci-0000:03:00.0-scsi-0:1:0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 Mar 1 10:56 pci-0000:03:00.0-scsi-0:1:0:1 ->
../../sda
lrwxrwxrwx 1 root root 9 Mar 1 10:56 pci-0000:03:00.0-scsi-0:1:0:2 ->
../../sdd
lrwxrwxrwx 1 root root 9 Mar 1 10:56 pci-0000:03:00.0-scsi-0:1:0:3 ->
../../sdc
Note that two things are strange:
1) the /dev/sd* nodes are in a random order after every restart.
# lsscsi
[1:0:0:0] storage HP P410i 6.64 -
[1:1:0:0] disk HP LOGICAL VOLUME 6.64 /dev/sdb
[1:1:0:1] disk HP LOGICAL VOLUME 6.64 /dev/sda
[1:1:0:2] disk HP LOGICAL VOLUME 6.64 /dev/sdd
[1:1:0:3] disk HP LOGICAL VOLUME 6.64 /dev/sdc
2) some symlinks created by udev are just wrong and therefore very
dangerous to use:
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0 -> ../../sda
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0-part1 -> ../../sdb1
scsi-SHP_LOGICAL_VOLUME_500143801722C0B0-part2 -> ../../sdb2
While 1 may be expected(???) I think 2 should really not happen.
I've tried to find out where things go wrong but the whole udev stuff
started to hurt my brain :)
I'm quite sure HPE Smart Array based servers are quite common so my big
question is: do others see that same?
While it's possible to live with this mess I'd really like to fix it somehow.
Thanks,
Simon
