Discuss

discuss@lists.centos.org

34753 discussions

Start a nNew thread

suricata-ids for centos 5 ?
by Eero Volotinen 19 Feb '13

19 Feb '13

Hi List, Is there any rpms for centos 5 available? -- Eero

3 3

Setting up bind - location for includes
by Robert Moskowitz 18 Feb '13

18 Feb '13

I am setting up bind this time around (just rebuilt my test machine via Kickstart) without chroot. I have a fair number of includes for named.conf; I have two views and other odds and ends. My thoughts are to make a directory; /etc/named.d to put all these includes into instead of 'dirtying' up /etc. This way the only files I replace/add to /etc are named.conf and rndc.key (I would like to work the latter around to also be in named.d, but this impacts rndc itself). Thoughts on this? Anyone else have a well segmented named.conf file?

4 6

Set an Ethernet Interface Metric
by SilverTip257 18 Feb '13

18 Feb '13

Hello All, I ended up answering my own question, but figured I'd share this and open up for discussion. It is possible to set a metric with 'route' or `ip route`. What I'm wondering is if there's a Red Hat/CentOS way of assigning a metric in the network-scripts? Answer: [0] (from 2008) works. ex: METRIC=10 Deployment Guides: EL5 [1] and EL6 [2] do not mention metrics on the previous interface configuration pages. *** The output from `ifconfig` does NOT show the metric as I set it, but the output from `route` does. I suppose this is the intended behavior? The default gateway route would have the metric and not the interface. Notice "Metric: 1" and "UG 10" below. >From my test box (EL6): ~]# ifconfig eth0 | grep ric; route -n | grep G UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.X.Y 0.0.0.0 UG 10 0 0 eth0 [0] http://www.cyberciti.biz/faq/rhel-fedora-centos-setup-routing-metric-networ… [1] https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/5/h… [2] https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/h… Have a great day, -- ---~~.~~--- Mike // SilverTip257 //

2 2

add CA to centos clients
by Natxo Asenjo 17 Feb '13

17 Feb '13

hi, I need to deploy an internal CA to our hosts. Fedora is planning something I could use now http://fedoraproject.org/wiki/Features/SharedSystemCertificates but it is not there yet ;-) I already have a deploying infrastructure (cfengine), so my question is: what files do I need to move around for a systemwide installation? The obvious start point will be /etc/PKI/ but in there in a random client I already see some problems: ls -l /etc/pki/ total 28 drwxr-xr-x. 6 root root 4096 Aug 23 06:55 CA drwxr-xr-x. 4 root root 4096 Mar 13 2012 dovecot drwxr-xr-x. 2 root root 4096 Mar 11 2012 java drwxr-xr-x. 2 root root 4096 Feb 8 10:46 nssdb drwxr-xr-x. 2 root root 4096 Oct 25 23:06 rpm-gpg drwx------. 2 root root 4096 Jun 22 2012 rsyslog drwxr-xr-x. 5 root root 4096 Oct 25 23:07 tls For ldap queries, I need to add it in /etc/openldap/certs and run cacertdir_rehash. But there are lots of other apps that have their own configuration. I guess I am not the first to have to do this, but google found little info about this. Have you guys gone through such a project and would you care sharing your solutions? Thanks! -- Groeten, natxo

2 3

cheap cloud providors
by Tim Dunphy 17 Feb '13

17 Feb '13

Hey guys, Apologies in advance if this question is in poor taste. But I've really fallen in love with learning about the cassanrdra database. The only problem is that it doesn't run very well on an t1.micro instance at amazon and the larger sizes are quite expensive. An m1.small can do the trick, while still not optimal. So I was wonder if there was any real value in the cloud or even VPS world where I could setup a small Cassandra ring and go to town learning the ins and outs of how it operates. Thanks Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

4 3

CentOS Bugtracker: how to give up on an issue?
by Tilman Schmidt 17 Feb '13

17 Feb '13

Every time I go to http://bugs.centos.org/my_view_page.php I am shown, under "Reported by me", three problems with the CentOS Bacula packages which I reported in 2011, complete with proposed fix, but which never got any love (status still "new"): 0005271 missing dependency mt-st bacula - 2011-11-28 12:44 0005261 make_catalog_backup.pl creates .my.cnf with bad mode bacula - 2011-11-24 11:19 0005260 bad symlink /usr/sbin/dbcheck bacula - 2011-11-24 11:08 As I have since switched to Simone Caronni's better maintained Bacula packages I would prefer not to be constantly reminded of that useless effort anymore. So I'd like to close them as "nobody cares" or something like that to get them off my radar. Any hints how I can do that? TIA T. -- Tilman Schmidt Phoenix Software GmbH Bonn, Germany

4 7

Re: [CentOS] : cheap cloud providors
by Eero Volotinen 16 Feb '13

16 Feb '13

Try tilaa.nl virtual servers? 16.2.2013 22.40 "Tim Dunphy" <bluethundr(a)gmail.com> kirjoitti: > Hey guys, > > Apologies in advance if this question is in poor taste. But I've really > fallen in love with learning about the cassanrdra database. The only > problem is that it doesn't run very well on an t1.micro instance at amazon > and the larger sizes are quite expensive. An m1.small can do the trick, > while still not optimal. So I was wonder if there was any real value in the > cloud or even VPS world where I could setup a small Cassandra ring and go > to town learning the ins and outs of how it operates. > > Thanks > Tim > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

2 1

updating a Centos 6 lamp stack
by David Mehler 16 Feb '13

16 Feb '13

Hello, I've got a new centos 6 system it's i386 and I'm wanting to update it's lamp stack, specifically httpd, php, and mysql. Also, if postfix as an MTA would be available that's a plus. I've checked out the centos wiki and it looks like I have two choices for third party repos for this task. I have enabled rpmforge as of now. The two repos I'm seeing are Les RPM de Remi repository, and IUS Community Repo. I'm wanting from user's who have used either or both impressions, pro conn of both and which you'd prefer. Thanks. Dave.

5 7

apcupsd, odd behavior
by m.roth＠5-cent.us 16 Feb '13

16 Feb '13

As we have every day, we had a power blip overnight. one, at least, of the servers connected to a SmartUPS via cable, announced that "power exhausted, initiating shutdown" (which I've disabled). The thing is, I know the servers on that UPS draw a ridiculous amount of power, but I don't see that on the others... and this was three seconds, not minutes, after it announced there was a power outage. Has anyone else seen this behavior? mark

7 15

OT: UPS battery vendor, cont'd
by m.roth＠5-cent.us 16 Feb '13

16 Feb '13

Here's the state of my search: BatteriesPlus is... odd. The corporate site, and after a phone call, tell me they don't do GSA, but some of their franchises do. I called the local one, and they do. However, the only RBC 43 they offer, I might as well buy direct from APC, at well over $300 for the set. Battery Sharks, and Apex, don't do GSA... but they *do* offer replacements for about $100 for the set. Having checked with my manager, we'll try the open market quotes. I would like a third recommendation, so I can offer purchasing three quotes. Recommendations? And thanks to all. mark

10 17

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss