Discuss

discuss@lists.centos.org

34753 discussions

Re: [CentOS] Multiple Virtual SSL sites with Apache httpd on CentOS 5
by J.Witvliet＠mindef.nl 04 Feb '13

04 Feb '13

-----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Eero Volotinen Sent: Monday, February 04, 2013 7:34 AM To: CentOS mailing list Subject: Re: [CentOS] Multiple Virtual SSL sites with Apache httpd on CentOS 5 2013/2/4 Harold Pritchett <harold(a)uga.edu>: > According to this post which is over 3 years old (http://tinyurl.com/69gr4ol) the apache httpd server now supports multiple ssl sites on the same server. This became effective > with release 2.2.12. It also requires OpenSSL 0.9.8f or later. Serving multiple ssl certificates requires SNI on server and also client support. http://www.rackspace.com/k nowledge_center/article/serving-secure-sites-with-sni-on-apache -----Original Message----- Biggest problem indeed with sni is that all intended clients must also support it... You might consider using IPv6, and give each (virtual) http-server its own address. That works very well indeed, but chat24 is that here also the clients must be able to connect over v6 ;-) Hw ______________________________________________________________________ Dit bericht kan informatie bevatten die niet voor u is bestemd. Indien u niet de geadresseerde bent of dit bericht abusievelijk aan u is toegezonden, wordt u verzocht dat aan de afzender te melden en het bericht te verwijderen. De Staat aanvaardt geen aansprakelijkheid voor schade, van welke aard ook, die verband houdt met risico's verbonden aan het elektronisch verzenden van berichten. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. The State accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.

1 0

Python 3.3 for CentOS-6
by Florian La Roche 03 Feb '13

03 Feb '13

Hello, I've built python3-3.3 binary rpms based on the current Fedora packages. Binary rpms are built with koji/mock. Binary rpms are only tested very lightly, but I welcome additional tests or patches as well as additional python3 rpms people want to use: http://jur-linux.org/download/el-updates/6/ Has anyone a Django15 rpm using python3? greetings, Florian La Roche

1 0

X forwarding
by skull 02 Feb '13

02 Feb '13

How does one use X forwarding properly? I got a server running CentOS 6.3 at runlevel 3 (no DE installed) I try to access virt-manager via x-forwarding from another CentOS 6.3 client in my network (runlevel 5 with default gnome) on The server i changed my sshd_config: X11Forwarding yes i installed xauth on both of the machines. Anything else there is to do? When i try to: ssh -X root@server virt-manager I still get the following error message: RuntimeError: could not open display Which is in fact a message i get with every graphical programm i try to run through that. So I guess it's an error in my ssh configuration. Any tips?

2 2

Dell unofficial community repository - what do you think?
by Rafał Radecki 01 Feb '13

01 Feb '13

Hi all. I am currently gathering information about firmware update on Dell PowerEdge machines. I've found http://linux.dell.com/wiki/index.php/Firmware-tools_announcement and https://linux.dell.com/repo/community/ It is an unofficial, community supported repository. What are your experiences: should I perform firmware updates the traditional way by downloading *.bin packages from Dell and run them manually or should I use this repo? Is this repo "safe" and releases stable packages? Best regards, Rafal Radecki.

7 8

Re: [CentOS] CentOS 6.3: libreport/abrt update problem
by Fabien Archambault 01 Feb '13

01 Feb '13

2013/2/1 odusseas <piskopakis_antreas(a)hotmail.com>: > Luigi Rosa <lists@...> writes: > >> >> >> Mogens Kjaer said the following on 01/02/2013 07:52: >> >> > In updates, there are new packages of abrt and libreport. But yum update >> > gives me: Error: Package: abrt-2.0.8-6.el6.centos.2.x86_64 (updates) >> >> Confirmed. Same issue here. >> >> Ciao, >> luigi >> > > > The same problem also for me!! > any help?? > Cheers > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos You can just skip, temporarily the update of abrt with: yum update --exclude=abrt\* This should leave only abrt not updated (not a huge issue) or just wait a couple of days until it is fixed. Cheers, Fabien

2 1

CentOS 6.3: libreport/abrt update problem
by Mogens Kjaer 01 Feb '13

01 Feb '13

Hello, In updates, there are new packages of abrt and libreport. But yum update gives me: Error: Package: abrt-2.0.8-6.el6.centos.2.x86_64 (updates) Requires: libreport >= 2.0.9-5.el6_3.2 Removing: libreport-2.0.9-5.el6.centos.x86_64 (@base) libreport = 2.0.9-5.el6.centos Updated By: libreport-2.0.9-5.el6.centos.2.x86_64 (updates) libreport = 2.0.9-5.el6.centos.2 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest Is the new libreport incorrectly named libreport-2.0.9-5.el6.centos.2.x86_64 instead of: libreport-2.0.9-5.el6.2.x86_64 or is the dependency of abrt incorrect? Mogens -- Mogens Kjaer, mk(a)lemo.dk http://www.lemo.dk

5 5

How to extract one file from rpm using yum?
by Robert Moskowitz 01 Feb '13

01 Feb '13

I want to get the original version of /etc/clamd.d/amavis.conf from the amavisd-new rpm to get the defaults to submit a bug report. I could not figure out how to do this, so I did a reinstall, but it did not replace this file (whatprovides says it comes from this rpm). Is there a way to extract just the one file, and better yet, place it elsewhere than its regular destination? thanks

8 10

Re: [CentOS] Opening a jar file from the desktop
by James B. Byrne 01 Feb '13

01 Feb '13

On Fri, February 1, 2013 10:59, Reindl Harald wrote: > java -jar superbcalc.jar Thank you. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Opening a jar file from the desktop
by James B. Byrne 01 Feb '13

01 Feb '13

I have java-1.7.0-openjdk installed on a CentOS-6.3 x86_64 system. On my desktop I have a jar file containing a calculator program which runs fine on CentOS-5 and on MS-Windows machines. On the CentOS-6 system when I right-click on the jar file and say open with java nothing apparently happens. When I double-click on it then I see a file browser window offering to extract the contents but there are no contents visible, only an empty / directory. If I go to the desktop in a terminal session and type java superbcalc.jar then I see this message: "Could not find or load main class superbcalc.jar" There is no CLASSPATH environment variable set by the system. If I provide one and include the current directory '.' I get the same error. CLASSPATH=. java superbcalc.jar Error: Could not find or load main class superbcalc.jar What has changed in CentOS-6 to stop this from working and how do I get jar files to open and run using Java both from the command line and from the desktop? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

error during yum update 6.3
by Steve Clark 01 Feb '13

01 Feb '13

Hello, Anybody else running into this. I am seeing it on two different CentOS boxes I have. yum --disablerepo=* --enablerepo=base,updates update ... ---> Package abrt.i686 0:2.0.8-6.el6.centos will be updated ---> Package abrt.i686 0:2.0.8-6.el6.centos.2 will be an update --> Processing Dependency: libreport >= 2.0.9-5.el6_3.2 for package: abrt-2.0.8-6.el6.centos.2.i686 ... ---> Package libreport.i686 0:2.0.9-5.el6.centos will be updated ---> Package libreport.i686 0:2.0.9-5.el6.centos.2 will be an update ... Error: Package: abrt-2.0.8-6.el6.centos.2.i686 (updates) Requires: libreport >= 2.0.9-5.el6_3.2 Removing: libreport-2.0.9-5.el6.centos.i686 (@base) libreport = 2.0.9-5.el6.centos Updated By: libreport-2.0.9-5.el6.centos.2.i686 (updates) libreport = 2.0.9-5.el6.centos.2 -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark(a)netwolves.com http://www.netwolves.com

3 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss