Discuss

discuss@lists.centos.org

34758 discussions

su path hard coded?
by Stephen Harris 29 Jul '12

29 Jul '12

Is there any way of changing the PATH that's set by 'su' to be specific to my needs? It looks like 'su' has the path's hard coded. % rpm -qf /bin/su coreutils-5.97-34.el5_8.1 % strings /bin/su | grep local.bin /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin /usr/local/bin:/bin:/usr/bin I could kludge it with pam_env, I guess, but that may have more impact than just 'su' and I'd like to avoid side-effects. Thanks! -- rgds Stephen

10 21

problem with machine "freezing" for short periods
by Vanhorn, Mike 27 Jul '12

27 Jul '12

I have two HP dc7800 convertible minitowers that are exhibiting the following issue: every 5-10 minutes, they will "freeze" for about 30 seconds, and then pick right back up again. During the freeze, it seems that nothing at all happens on the system; the clock doesn't even advance (it just picks up again with the next second, and that 30-or-so seconds are lost). I've tried both CentOS 5.8 and 5.7, thinking it was a kernel incompatibility, but the problem happened with both versions. I have tried different hard drives, different memory, even swapped the entire machine, and the problem exists everywhere. I have tried adding "pci=nommconf" to the kernel line, as that was reported as being necessary back with 5.2 on these machines, but that made no difference (and shouldn't be necessary now, anyway, as I believe the issue has either been fixed or worked-around). I am stuck, and can't figure out where to even suspect the problem might actually be. There are no errors getting logged anywhere that I can find, probably because everything just "stops" temporarily, so there's nothing for the system to log. Does anyone have any idea where I could look to fix this? I think I am next going to go back to 5.2, where the pci=nommconf is necessary, because at least back that far it appears to have been working for other people. However, I really would like to have this running 5.8. Thanks! --- Mike VanHorn Senior Computer Systems Administrator College of Engineering and Computer Science Wright State University 265 Russ Engineering Center 937-775-5157 michael.vanhorn(a)wright.edu http://www.cecs.wright.edu/~mvanhorn/

7 15

SELinux in CentOS 6
by Beartooth 27 Jul '12

27 Jul '12

It keeps butting in when I try to install map software from Garmin under Wine. I'm not nearly competent not willing to apply the remedy it suggests. How do I get to someplace where I can disable it, or at least set it to permissive?

9 8

CentOS-announce Digest, Vol 89, Issue 14
by centos-announce-request＠centos.org 27 Jul '12

27 Jul '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:1119 CentOS 5 aide FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 27 Jul 2012 10:10:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:1119 CentOS 5 aide FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120727101059.GA20399(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:1119 Upstream details at : http://rhn.redhat.com/errata/RHBA-2012-1119.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 170c254c937e7ed9b0fe1ce450b9f7e0db7ed7a1b7cf059c9b8e6d801b10a8f9 aide-0.13.1-8.el5.i386.rpm x86_64: 32362740882bf8eb526da3e9fec84404de95dc1fc4cad2acdcd7b43a9cd82cfc aide-0.13.1-8.el5.x86_64.rpm Source: 80d60ca7746e0af430591d4730f6d404e489ea1b345d968b4855278a6261aaf8 aide-0.13.1-8.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 89, Issue 14 ***********************************************

1 0

CentOS 6.x - /proc/ide ?
by TFML 27 Jul '12

27 Jul '12

I was curious, why was /proc/ide removed and was it moved to another directory to obtain ide drivers information?

2 2

RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
by Kaushal Shriyan 27 Jul '12

27 Jul '12

Hi, Are there CLI utility for RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) for CentOS 5.8? Regards, Kaushal

2 1

system-config-network-tui not part of base install... wtf
by Fernando Cassia 27 Jul '12

27 Jul '12

Who was the genius that decided that system-config-network-tui should NOT be part of the base CentOS 6.3 install ?? Not to mention it has insane deps like wifi firmware packages... not really if all you want to do is configure eth0 from the command line... FC

7 12

No tengo red despues de instalar
by Rodrigo Pichiñual Norin 27 Jul '12

27 Jul '12

Que tal amigos: Resulta es que no tengo red despyes de instalar centos 6.2, sigo la ruta: /etc/sysconfig/network-scripts/ y no me aparece el archivo ifcfg-eth0 e visto cosas similares de otros usuarios de centos.... donde si encuentran ifcfg-eth0 y tienen que modificar el Onboot a yes, pero ami no me aparece? realice la instalacion minimal. -- Rodrigo Isaias Pichiñual Norin Ingeniero en Computación 87272971 rodrigo.pichinual(a)gmail.com

4 5

EXT4-fs: Can't allocate: Allocation context details
by Aji 27 Jul '12

27 Jul '12

Hi, I'm using centos 5.8 running as a production system, my system suddenly crash because the /var/log/kern.log have a huge file size, and make the disk full. this is the message from kern.log 2012-07-26T05:36:39.120185+02:00 NL50-ND019 kernel: EXT4-fs: Can't allocate: Allocation context details: 2012-07-26T05:36:39.120256+02:00 NL50-ND019 kernel: EXT4-fs: status 1 flags 3104 2012-07-26T05:36:39.120263+02:00 NL50-ND019 kernel: EXT4-fs: orig 399/15394/64@44765, goal 399/15392/2048@43008, best 0/0/0@44765 cr 3 2012-07-26T05:36:39.120269+02:00 NL50-ND019 kernel: EXT4-fs: 0 scanned, 0 found 2012-07-26T05:36:39.120273+02:00 NL50-ND019 kernel: EXT4-fs: groups: 2012-07-26T05:36:39.120277+02:00 NL50-ND019 kernel: 400: 32254/0 2012-07-26T05:36:39.120281+02:00 NL50-ND019 kernel: 401: 32254/1 2012-07-26T05:36:39.120285+02:00 NL50-ND019 kernel: 402: 32254/1 2012-07-26T05:36:39.120288+02:00 NL50-ND019 kernel: 403: 32254/1 2012-07-26T05:36:39.120293+02:00 NL50-ND019 kernel: 404: 32254/1 2012-07-26T05:36:39.120296+02:00 NL50-ND019 kernel: 405: 32254/1 2012-07-26T05:36:39.120300+02:00 NL50-ND019 kernel: 406: 32254/1 2012-07-26T05:36:39.120303+02:00 NL50-ND019 kernel: 407: 32254/1 2012-07-26T05:36:39.120307+02:00 NL50-ND019 kernel: 408: 32254/1 2012-07-26T05:36:39.120311+02:00 NL50-ND019 kernel: 409: 32254/1 2012-07-26T05:36:39.120315+02:00 NL50-ND019 kernel: 410: 32254/1 2012-07-26T05:36:39.120319+02:00 NL50-ND019 kernel: 411: 32254/1 2012-07-26T05:36:39.120323+02:00 NL50-ND019 kernel: 412: 32254/1 2012-07-26T05:36:39.120326+02:00 NL50-ND019 kernel: 413: 32254/1 2012-07-26T05:36:39.120330+02:00 NL50-ND019 kernel: 414: 32254/1 2012-07-26T05:36:39.120334+02:00 NL50-ND019 kernel: 415: 32254/1 2012-07-26T05:36:39.120337+02:00 NL50-ND019 kernel: 416: 32254/1 2012-07-26T05:36:39.120341+02:00 NL50-ND019 kernel: 417: 32253/1 2012-07-26T05:36:39.120345+02:00 NL50-ND019 kernel: 418: 32254/1 2012-07-26T05:36:39.120348+02:00 NL50-ND019 kernel: 419: 32254/1 2012-07-26T05:36:39.120352+02:00 NL50-ND019 kernel: 420: 32254/1 2012-07-26T05:36:39.120355+02:00 NL50-ND019 kernel: 421: 32254/1 Does anyone have same problem like me?, I only find this https://bugzilla.redhat.com/show_bug.cgi?id=758935 I'd appreciate any suggestions any of you may wish to make. thanks in advance, Fazrie Setyadi

1 0

Re: [CentOS] system-config-network-tui not part of base install... wtf
by Karanbir Singh 26 Jul '12

26 Jul '12

On 07/26/2012 11:33 PM, Reindl Harald wrote: > i do not install every day a Fedora/CentOS > the is a minimal or whatever option My apologies. I expected you to have done due diligence before posting on the subject. -- Karanbir Singh +44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh ICQ: 2522219 | Yahoo IM: z00dax | Gtalk: z00dax GnuPG Key : http://www.karan.org/publickey.asc

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss