Discuss

discuss@lists.centos.org

34758 discussions

Start a nNew thread

CentOS-announce Digest, Vol 89, Issue 12
by centos-announce-request＠centos.org 24 Jul '12

24 Jul '12

1 0

Fwd: Re: kmod-nvidia?
by m.roth＠5-cent.us 23 Jul '12

23 Jul '12

Date: Fri, 20 Jul 2012 18:37:52 -0400 From: Lamar Owen <lowen(a)pari.edu> On Friday, July 20, 2012 05:30:14 PM m.roth(a)5-cent.us wrote: > Stephen Harris wrote: > > On Fri, Jul 20, 2012 at 04:44:07PM -0400, m.roth(a)5-cent.us wrote: > >> Available Packages > >> kmod-nvidia.x86_64 295.59-1.el6.elrepo > > Yes, and it showed up in your list... > > Or am I missing something? > > Think so. That was from my machine, where it's installed months ago. On > the user's machine, all that shows, regardless of whether I disable all > other repos and enable only elrepo, or if I use all and enable elrepo, all > I see under available packages is nvidia-x11-drv. Sorry if I pasted in > stuff to confuse. Whoa, Mark. Man, you must be tired. The fact that your machine with the 290 driver only sees the kmod-nvidia for 295 and does not see nvidia-x11-drv is a big clue. You might want to double check the includepkgs= line on the machine you originally posted about (not this latest machine), and make sure that it isn't: includepkgs=nvidia-x11-drv I can duplicate this behavior very easily, and can duplicate the reverse behavior as well, by manipulating the includepkgs= line. Here's an example run, from a RHEL 6.3 machine (same would apply to CentOS, just with a few differences in the yum output dealing with the RHN repos....): <MVNCH> Works fine. The includpkgs= line has to include all dependencies, as it really does do what the man page says it does. Try it without the includepkgs= line, or with it commented out, and see if you get different results. Thank you *so* much - this works. One oddity: originally, I'd had only includepkgs=kmod-nvidia, *not* the nvidia-x11-drv. My last try, last week, I'd added extra lines with that on two separate lines: includepkgs=kmod-nvidia includepkgs=nvidia-x11-drv Just now, following your example, I put them on one line includepkgs=nvidia-x11-drv kmod-nvidia and it worked with no problem at all. Odd. And for the guy from the elrepo team, you'll note it was *not* an elrepo problem, which is what I'd suspected, unless the repodata file's changed since Friday. mark

5 9

CentOS-announce Digest, Vol 89, Issue 11
by centos-announce-request＠centos.org 23 Jul '12

23 Jul '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:1107 CentOS 6 bind Update (Johnny Hughes) 2. CEBA-2012:1106 CentOS 6 net-snmp Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 23 Jul 2012 12:27:01 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:1107 CentOS 6 bind Update To: centos-announce(a)centos.org Message-ID: <20120723122701.GA5476(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:1107 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1107.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 79af831ffa40d116718887942c04a14e9ebdd27ea4d9abc63987b0c6b03f18d3 bind-9.8.2-0.10.rc1.el6_3.1.i686.rpm 9b9314de9e26448939b28f8b1d0fabda81e4bb032cc825ddf4f0ccbf968adfa9 bind-chroot-9.8.2-0.10.rc1.el6_3.1.i686.rpm e6e2ad04a9ebcce77c6d51494b829a6a5e43aac9e4228081a6b83f80253fc231 bind-devel-9.8.2-0.10.rc1.el6_3.1.i686.rpm 49d33bc99f94a3dbf45ab4a51f65f56e582135d46205fd3d14379413737400e4 bind-libs-9.8.2-0.10.rc1.el6_3.1.i686.rpm 735d69cbebfe656820dc4871a941cf9549e22bba68a7932f2b5d97a89708e996 bind-sdb-9.8.2-0.10.rc1.el6_3.1.i686.rpm bc6a454988089e994e491c2636ad467d9427cb30496675b6bfe32b613ee3c34b bind-utils-9.8.2-0.10.rc1.el6_3.1.i686.rpm x86_64: a2249aa82302fffad727110b4695877947690d40230834431e887a491512e39c bind-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm f30f07eaf39fa67c16a4cd59e284e37a331ff98890029609ebe9993737a280f1 bind-chroot-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm e6e2ad04a9ebcce77c6d51494b829a6a5e43aac9e4228081a6b83f80253fc231 bind-devel-9.8.2-0.10.rc1.el6_3.1.i686.rpm 2b44d22c9e91eab7090079ab1fbd5ee8cdcca137091ef6eebfd82792f048aab5 bind-devel-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm 49d33bc99f94a3dbf45ab4a51f65f56e582135d46205fd3d14379413737400e4 bind-libs-9.8.2-0.10.rc1.el6_3.1.i686.rpm be1a9287feb0667b3fb77e53e26337528b96560d223ef853fafd92f4c97ef6fc bind-libs-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm 0be79f22920736fc640a1b12e24e90288ab4b9ac5b5d3e4de7451ffc577a4aa1 bind-sdb-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm 68054c9a9f513619bc52715307850e7fb0effbe6cc831bf716cfc69c3df875a3 bind-utils-9.8.2-0.10.rc1.el6_3.1.x86_64.rpm Source: f62b4d0d8a18ece63b1596b3ba3777823fe1f879bbda35329e497d18276bc042 bind-9.8.2-0.10.rc1.el6_3.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 23 Jul 2012 12:27:22 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:1106 CentOS 6 net-snmp Update To: centos-announce(a)centos.org Message-ID: <20120723122722.GA5582(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:1106 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1106.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2def3d36c67cf96f058b78c16502a4ce064ecfb5d39185bbc317c906b3869ff5 net-snmp-5.5-41.el6_3.1.i686.rpm 69af5d5661a34ce41d43e44f195773363820b96e075179be0facb006169e6ef1 net-snmp-devel-5.5-41.el6_3.1.i686.rpm 5237accb6860115976eaf408aa26d8b54f7e1683b936b42d6a64609c8e1b194b net-snmp-libs-5.5-41.el6_3.1.i686.rpm 15e1cdb646b7d3ae21fadc303ebb30694a6594552ec5677c1a49c9c004797357 net-snmp-perl-5.5-41.el6_3.1.i686.rpm 186121b1f2093e08a60f686928900be7e2bba6e880f4271fa70f49f42d9e4f2e net-snmp-python-5.5-41.el6_3.1.i686.rpm 67a8ef1a4256e84d873056b0631eb4bae3a46fe93d0b9b5b55afa1a8496387f3 net-snmp-utils-5.5-41.el6_3.1.i686.rpm x86_64: 3f6a3f0e109d866f41745bb3ecee3d6a3480564db9bcfd740878599314527dc1 net-snmp-5.5-41.el6_3.1.x86_64.rpm 69af5d5661a34ce41d43e44f195773363820b96e075179be0facb006169e6ef1 net-snmp-devel-5.5-41.el6_3.1.i686.rpm 231d24e7d55b28f15354f8eedd7fa33627831e92d217338b33337c818c019a16 net-snmp-devel-5.5-41.el6_3.1.x86_64.rpm 5237accb6860115976eaf408aa26d8b54f7e1683b936b42d6a64609c8e1b194b net-snmp-libs-5.5-41.el6_3.1.i686.rpm ad5d8e8cfddd5a328589ef66c085e0d96211bd0f5c7d49e2a2dd2d960d4b748c net-snmp-libs-5.5-41.el6_3.1.x86_64.rpm d026d9574e88d8981d267916c6a369b0ee6c45ea304577793d7ad58f05aa0bf9 net-snmp-perl-5.5-41.el6_3.1.x86_64.rpm 4bec84e752276e72c058910cdf6bce6f4d25716e0347c80894be34fe481f369a net-snmp-python-5.5-41.el6_3.1.x86_64.rpm 1a396148833824fbcb88c38a322ca91943c6bf3bf9e8ec2d500857cbf0850b50 net-snmp-utils-5.5-41.el6_3.1.x86_64.rpm Source: 0d14d864bbce0659958412b02ea5bf9b474eb579fa1ee277dbad0cf2094ba6f7 net-snmp-5.5-41.el6_3.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 89, Issue 11 ***********************************************

1 0

Re: [CentOS] 'localyum' alias...
by Fabien Archambault 23 Jul '12

23 Jul '12

2012/7/23 Fernando Cassia <fcassia(a)gmail.com>: > On Mon, Jul 23, 2012 at 3:00 AM, Fabien Archambault > <fabien.archambault(a)univ-amu.fr> wrote: >> Since the latest version of yum obsolete the localinstall option, I >> believe that using this alias is useless. > > I have used yum's localinstall option on my CenOS 6.3 box... and it worked... This option is kept for legacy purpose [1] (or man yum). It works yet but will be removed in the future releases (years ago) I believe. [1] http://linux.die.net/man/8/yum > > FC > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

2 1

n00b rsyslog.conf question - how to separate local syslog from network appliance syslog?
by Rogelio 23 Jul '12

23 Jul '12

I have several network appliances, and I want aggregate their syslog output for later analysis. Eventually I might think about a Splunk box, but for the interim I'm hoping to just build a CentOS 6 syslog server and have it aggregate everything on it for quick review. I installed rsyslog and am looking through the /etc/rsyslog.conf file for what I configure to (a) listen for syslog input from other devices (UDP port 514 is fine), (b) make a log, and (c) log rotate files. (a) I see in there (if I comment it out) # Provides UDP syslog reception $ModLoad imudp $UDPServerRun 514 (Obviously add an iptables rule to let this traffic in) (b) I see options in there, but am not sure how to separate the local logs from the remote logs. Is it something like the following? *.*;local6.none; auth,authpriv.none -/var/log/syslog (c) I understand I can do if I edit /etc/logrotate.d/MyNetworkAppliance.log. This isn't as big of a concern right now. Just trying to figure out how to log things separately. :/ Any suggestions on what I should do to make this work?

2 1

'localyum' alias...
by Fernando Cassia 23 Jul '12

23 Jul '12

This alias should be a great default addition to the bashrc... as it helps install packages to a CentOS system from the mounted install CD before you get networking up and running... alias localyum='yum --disablerepo=* localinstall' Does Red Hat care about Requests for Enhancement? or is filing a bug pointless? FC

1 0

Extracting the window (titlebar) name from a bash script?
by Fernando Cassia 23 Jul '12

23 Jul '12

Surely there' s a way to obtain the "window name" -which appears on the Window Manager' s Titlebar- for running processes, right?. Well, I can't find it... I mean, the names that appear below each icon when you alt-tab to switch an app to the foreground. Is there a simple way to obtain that data along with matching PIDs, from a Bash script? any built-in tools that provide such? TIA FC -- During times of Universal Deceit, telling the truth becomes a revolutionary act - George Orwell

2 2

redirect ssl mailman rpm
by fakessh ＠ 22 Jul '12

22 Jul '12

hello guys I encounter a problem with the package mailman and forwarding ssl my precedent conversation to this problem http://www.mail-archive.com/mailman-users@python.org/msg61411.html mark sapiro was thinking of a httpd problem I call the centos community to provide help me to rewrite the url for this to work. thanks -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC2626742 gpg --keyserver pgp.mit.edu --recv-key C2626742 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting https://lists.fakessh.eu/mailman/ This list is moderated by me, but all applications will be accepted provided they receive a note of presentation

1 0

Can't get Grub work on clone of machine
by Gregory Machin 22 Jul '12

22 Jul '12

Hi. I have cloned a RHEL 5.6 physical server over to a ESXi 5.0 Virtual Machine. Using a live CD on the new Virtual Machine I created 3 partition /boot (/dev/sda1), / (/dev/sda2) and swap (/dev/sda3), I then mounted the / (sda2) partition and created the /boot directory and mount the boot partition partition /dev/sda1 into /boot. I then used rsync to copy the source machine over to the Virtual Machine. I have not been able to get Grub to go further than : GRUB Loading stage1.5. GRUB Loading, please wait... Error 2 I have tried : the Super Grub http://www.supergrubdisk.org/wiki/Howto_Fix_Grub#GRUB_solution_.28Linux_she… http://wiki.centos.org/TipsAndTricks/ReinstallGRUB # chroot /mnt/sysimage # grub-install /dev/sda /dev/sda does not have any corresponding BIOS drive. http://www.av8n.com/computer/htm/grub-reinstall.htm # grub-install --root-directory=/mnt/sysimage /dev/sda /dev/sda does not have any corresponding BIOS drive. I have also tried a number using the grub console with a number of different configurations all failed . fdisk output : Disk /dev/sda: 549.7 GB, 549755813888 bytes 255 heads, 63 sectors/track, 66837 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 131 1048576 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 131 60968 488669184 83 Linux /dev/sda3 60968 66838 47152128 82 Linux swap / Solaris fstab [root@nzhmlwks113 vm]# cat fstab /dev/sda2 / ext3 defaults 1 1 /dev/sda1 /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/sda3 swap swap defaults 0 0 grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol01 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=10 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title Red Hat Enterprise Linux Server (2.6.18-308.11.1.el5) root (hd0,1) kernel /vmlinuz-2.6.18-308.11.1.el5 ro root=LABEL=/ ramdisk_size=8388608 initrd /initrd-2.6.18-308.11.1.el5.img title Red Hat Enterprise Linux Server (2.6.18-308.1.1.el5) kernel /vmlinuz-2.6.18-308.1.1.el5 ro root=LABEL=/ ramdisk_size=8388608 initrd /initrd-2.6.18-308.1.1.el5.img I have also tried "ro root=/dev/sda2" I have been look at then for 8 hour now and I'm clueless as to what I have missed. I'm hoping a fresh pair of eyes can see the issue. Thanks in advance. GM

5 10

Re: [CentOS] kmod-nvidia?
by m.roth＠5-cent.us 20 Jul '12

20 Jul '12

Ned Slider wrote: > On 20/07/12 16:55, m.roth(a)5-cent.us wrote: >> Jay Leafey wrote: >>> On 07/20/2012 10:32 AM, m.roth(a)5-cent.us wrote: >>>> Now that he's up, which was my highest priority, I'm back to looking around. I did a yum clean all, then yum --enablerepo=elrepo list >> ^^^^^^^^^^^^^^^^^^^^^ >>>> \*nvidia\*, and see >>>> * elrepo: mirror.symnds.com >>>> so this was what the mirrorlist came up with. That there's something screwy there. >>>> >>>> So I just pointed my browser there, and found elrepo there under distributions/elrepo. Anyone got any ideas why it finds that it's there, but yum doesn't see the actual repo (and yes, the >>>> kmod-nvidia packages are there)? >>> >> <snip> >>> Just a thought, have you tried flushing yum's metadata? I have run across a couple of instances where yum seems to get a bit... retentive and won't retrieve new metadata for one or more repositories. I usually >>> run "yum clean metadata" or "yum clean all", then re-try the operation. >>> Unless it is something *I* have boogered badly it usually works. >>> >> See emphasized line, above, from previous email. ^^^^^^^^ > > > Please post the output from: > > cat /etc/yum.repos.d/elrepo.repo > > and > > yum list \*kmod-nvidia\* > > thanks. Y'know, I appreciate any and all help, but I'm beginning to feel those trying to help haven't actually *read* my previous posts. Jay suggested I do a yum clean all, when I already said I'd done that; Ned's asking for what the repo looks like, when I posted the top bit and said the rest of the entries were the same.... Repeating my original post: ### Name: ELRepo.org Community Enterprise Linux Repository for el6 ### URL: http://elrepo.org/ [elrepo] name=ELRepo.org Community Enterprise Linux Repository - el6 baseurl=http://elrepo.org/linux/elrepo/el6/$basearch/ mirrorlist=http://elrepo.org/mirrors-elrepo.el6 enabled=0 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-elrepo.org protect=0 includepkgs=kmod-nvidia and the entries for elrepo-testing, elrepo-kernel, and elrepo-extras are the same. > > PS - This query would really be better placed on the elrepo users mailing lists rather than the general CentOS mailing lists. But the real question not about elrepo, which clearly *has* kmod-nvidia, but why yum can't find the repo, and that is on target for this list. mark

4 8

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss