Discuss

discuss@lists.centos.org

34758 discussions

after last update google-chrome no runs anymore
by Gary Trotcko 17 Jul '12

17 Jul '12

Hi all. I've updated google-chrome to recent version and it gets unbooted, when I fired google-chrome up I got messages like these: /usr/bin/google-chrome: /lib/libz.so.1: no version information available (required by /usr/bin/google-chrome) /usr/bin/google-chrome: /lib/libz.so.1: no version information available (required by /usr/bin/google-chrome) /opt/google/chrome/chrome: /lib/libz.so.1: no version information available (required by /opt/google/chrome/chrome) /opt/google/chrome/chrome: /lib/libz.so.1: no version information available (required by /opt/google/chrome/chrome) I'm familiar with selinux bug[1] and my issue is similar for this, but selinux in my system is completely disabled. I've opened issue at chrome's bug tracker[2] but not recived conceived response yet. Is anyone here who experienced the same problem? $ google-chrome --version 20.0.1132.47 $ cat /etc/centos-release CentOS release 6.2 (Final) $ uname -r 2.6.32-220.23.1.el6.centos.plus.i686 $ rpm -qa | grep zlib zlib-1.2.3-27.el6.i686 $ getenforce Disabled [1]http://code.google.com/p/chromium/issues/detail?id=96988 [2]http://code.google.com/p/chromium/issues/detail?id=135150 -- Best Regards, Gary Trotcko

7 12

CentOS-announce Digest, Vol 89, Issue 7
by centos-announce-request＠centos.org 17 Jul '12

17 Jul '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2012:1081 Moderate CentOS 6 sudo Update (Johnny Hughes) 2. CESA-2012:1081 Moderate CentOS 5 sudo Update (Johnny Hughes) 3. CEEA-2012:1084 CentOS 5 zlib FASTTRACK Update (Johnny Hughes) 4. CEBA-2012:1082 CentOS 6 psacct Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 16 Jul 2012 17:37:03 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:1081 Moderate CentOS 6 sudo Update To: centos-announce(a)centos.org Message-ID: <20120716173703.GA31555(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:1081 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-1081.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: aa3dceff6ea08c6b42e92d4ee52b5d7c30ef3243cf3cca012df400caecbcb0f4 sudo-1.7.4p5-12.el6_3.i686.rpm x86_64: 8479da363cd2b8bd86246baacc191a2f482380d027487660d568da8a4d6c7538 sudo-1.7.4p5-12.el6_3.x86_64.rpm Source: bf7120d6dc7046a8c08be74c994bbdc124292009f0db60ca0ae16e161b2b3472 sudo-1.7.4p5-12.el6_3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 16 Jul 2012 17:38:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:1081 Moderate CentOS 5 sudo Update To: centos-announce(a)centos.org Message-ID: <20120716173819.GA31647(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:1081 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-1081.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 714fba33968411c1e7013e9f24fcdc99e455e7d4e1425b02bbddc9fe91142ed4 sudo-1.7.2p1-14.el5_8.i386.rpm x86_64: b345b8ea5d53b1b6af2c40ef5a9a813f77f954d245097b1becadc7d0e881b190 sudo-1.7.2p1-14.el5_8.x86_64.rpm Source: d0840e9c5b11e5bf00952b505019359964d40077e3ad74e949fb40c3a56c1adf sudo-1.7.2p1-14.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 17 Jul 2012 09:10:48 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2012:1084 CentOS 5 zlib FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120717091048.GA12038(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2012:1084 Upstream details at : http://rhn.redhat.com/errata/RHEA-2012-1084.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4f5673d4076a551ed07edd9cff3f919f9237e2f6af26750878fb27f651a11099 minizip-1.2.3-7.el5.i386.rpm 551309b62a3759068c541639c5b874078a271dc35f2ed56b3c0bfa7140f60fe4 minizip-devel-1.2.3-7.el5.i386.rpm 589a2245290e1afee667104fcd250d0fd7f1a56098966bc9b720baf4c9bf80d0 zlib-1.2.3-7.el5.i386.rpm c8d8c954834aa265d4b41698e4020d6a1c8b39ac855994577c9fef95d7dd7638 zlib-devel-1.2.3-7.el5.i386.rpm x86_64: efe2515b0c245db9c5afa2ea2179d2a3ae16010de59b99d66694cfe1315e73ae minizip-1.2.3-7.el5.x86_64.rpm dd2ba4e28dc2c8cd799fc67eb0e47d72f6b03c6ba8e4ca4a09c56dd90a4a882a minizip-devel-1.2.3-7.el5.x86_64.rpm 589a2245290e1afee667104fcd250d0fd7f1a56098966bc9b720baf4c9bf80d0 zlib-1.2.3-7.el5.i386.rpm 9b9edc47ac7b0eb8c34f67060bb9aa83dfa9760eef096f2110e9c837857fedca zlib-1.2.3-7.el5.x86_64.rpm c8d8c954834aa265d4b41698e4020d6a1c8b39ac855994577c9fef95d7dd7638 zlib-devel-1.2.3-7.el5.i386.rpm 5b9902dbc1207b690c935de3a28667e954bc5d3331cbd4f6b3460315f550311a zlib-devel-1.2.3-7.el5.x86_64.rpm Source: 5743a4766e0c3e194d118452682a89e832fe28afe784307a3a3931dcde1cda08 zlib-1.2.3-7.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 17 Jul 2012 09:14:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:1082 CentOS 6 psacct Update To: centos-announce(a)centos.org Message-ID: <20120717091451.GA12182(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:1082 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1082.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 61b2c7610ef548ef7ada4184b2568cb1557ac4faa81e68801930bf9fb4af9073 psacct-6.3.2-63.el6_3.3.i686.rpm x86_64: 7d49494366faf659be897e7426594fc8cddfa955f0612a8e43c5dfc51a095305 psacct-6.3.2-63.el6_3.3.x86_64.rpm Source: 0c4c775522875da73e07afdff48ef6d3d1273a3f25809f6257d3dbc916416374 psacct-6.3.2-63.el6_3.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 89, Issue 7 **********************************************

1 0

CentOS 6 bridging problem.
by Rafał Radecki 17 Jul '12

17 Jul '12

Hi all. I have currently an OpenVZ server: uname -a Linux vader8.superhost.pl 2.6.32-042stab055.16 #1 SMP Fri Jun 8 19:22:28 MSD 2012 x86_64 x86_64 x86_64 GNU/Linux cat /etc/redhat-release CentOS release 6.2 (Final) lspci | grep -i eth 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) cd /etc/sysconfig/network-scripts cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none NM_CONTROLLED="no" ONBOOT="yes" TYPE="Ethernet" HWADDR=00:25:22:0D:C2:2A DOMAIN=domain.eu IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System eth0" UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 BRIDGE=vmbr0 cat ifcfg-eth0.20 DEVICE=eth0.20 BOOTPROTO=none ONBOOT=yes VLAN=yes BRIDGE=vmbr20 cat ifcfg-vmbr20 DEVICE=vmbr20 BOOTPROTO=none DHCPCLASS= IPADDR=10.20.0.108 NETMASK=255.255.0.0 ONBOOT=yes TYPE=Bridge cat ifcfg-vmbr0 DEVICE=vmbr0 BOOTPROTO=none DHCPCLASS= IPADDR=195.218.152.219 NETMASK=255.255.255.0 ONBOOT=yes TYPE=Bridge cat ifcfg-vmbr0:1 DEVICE=vmbr0:1 BOOTPROTO=none IPADDR=192.168.2.203 NETMASK=255.255.255.0 ONBOOT=yes cat ifcfg-venet0 DEVICE=venet0 ONBOOT=yes STARTMODE=onboot route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 vmbr0 195.218.152.0 0.0.0.0 255.255.255.0 U 0 0 0 vmbr0 10.20.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vmbr20 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 vmbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1006 0 0 vmbr20 0.0.0.0 193.218.152.1 0.0.0.0 UG 0 0 0 vmbr0 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination So I have a setup in which: - eth0 is my physical interface - it is bridged with vmbr0 with ip 195.218.152.219 and this address is accessible across the network - eth0.20 is a logical interface in VLAN 20 on eth0 - it is bridged with vmbr20 with ip 10.20.0.108 and this address IS NOT accessible across the network - vmbr0 bridge has an alias vmbr0:1 with ip 192.168.2.203 and this address is accessible across the network When I set up the network for testing: - eth0 as a physical interface 195.218.152.219 - eth0.20 as a VLAN interface 10.20.0.108 both addresses are accessible across the network (VLANs on the switch are set up correctly, VLAN 1 untagged, VLAN 20 tagged). Do you see an error in my configuration? Why is 10.20.0.108 not available? Best regards, Rafal.

4 11

size of netinst iso
by Johan Jonkers 17 Jul '12

17 Jul '12

Hi. I was wanting to set up a centos 6 virtual machine using the netinst iso image. I've done this for Centos 5 before but I was surprised to see that the size of the netinst iso had gone from +/- 10Mb to 227Mb. I was therefore wondering if I had the right file? If so, why did it get 22x bigger then the previous version? Regards, Johan

4 3

3TB usb drive won't mount
by Bent Terp 17 Jul '12

17 Jul '12

Hi list! I have a 3TB usb drive with an NTFS filesystem on it, that I can't mount.: [bent@bnlaptop ~]$ sudo /sbin/mount.ntfs-3g /dev/sdb1 /mnt Failed to read vcn 0xf28: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. On a Win7 machine there are no problems and chkdsk can't find anything wrong with the filesystem. I can mount 1TB drives using ntfs-3g without problems, so the driver doesn't seem to be the issue. I've tried both CentOS6.2 and Fedora16 with the same result. Any suggestions? with kind regards, Bent Terp

5 7

probleme rpm roundcubemail-0.7.2-2.el6.noarch force ssl fail
by fakessh 17 Jul '12

17 Jul '12

hello guys hello master of holy bible of centos I am having problems with the package for EPEL roundcubemail centos 6 options for config roundcubemail to force SSL connections not working // enforce connections over https // with this option enabled, all non-secure connections will be redirected. // set the port for the ssl connection as value of this option if it differs from the default 443 $rcmail_config['force_https'] = true; // tell PHP that it should work as under secure connection // even if it doesn't recognize it as secure ($_SERVER['HTTPS'] is not set) // e.g. when you're running Roundcube behind a https proxy $rcmail_config['use_https'] = true; this option not work please maybe a fix -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC2626742 gpg --keyserver pgp.mit.edu --recv-key C2626742 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting https://lists.fakessh.eu/mailman/ This list is moderated by me, but all applications will be accepted provided they receive a note of presentation

1 1

Re: [CentOS] Fwd: Bug 800181: NFSv4 on RHEL 6.3 over six times slower than 5.8
by James B. Byrne 16 Jul '12

16 Jul '12

On Wed, July 11, 2012 00:21, Kahlil Hodgson wrote: > > If you are just using the Red Hat bugzilla that might be your problem. > I've heard a rumour that Red Hat doesn't really monitor that channel, > giving preference to issues raised though their customer portal. That > does makes _some_ commercial sense, but if they are, it would be > polite > to shut down the old bugzilla service and save some frustration. I > don't have a Red Hat subscription myself, so I can't really test this. > Can anyone, perhaps with a Red Hat subscription, shed any light on > this? This rumour is almost certainly unfounded. I report the odd bug to RH through Bugzilla and I have always had a timely acknowledgement and as far as I can tell they have either been rejected or accepted within a reasonably short time. Some of them have actually been fixed. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Re: [CentOS] libre office
by James B. Byrne 16 Jul '12

16 Jul '12

On Tue, July 10, 2012 23:22, Joseph Spenner wrote: > On Jul 10, 2012, at 7:17 PM, "Michel Donais" <donais(a)telupton.com> > wrote: > >> Why in 6.3 they move OpenOffice to LibreOffice? >> >> >> --- >> Michel Donais >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos > > Not sure. Probably same reason SciFi changed to SyFy; bored marketing > people trying to 'add value'. > The main reason for the switch to LO from OO is Oracle Corporation's buyout of Sun. Shortly after that event the principal developers of OO left that project and forked LibreOffice. Oracle went through some handwaving exercise about being committed to open source but development of OO stalled, either by design or neglect. Evential Oracle turned OO over to Apache.org but by then a large portion of the OO audience had already switched to LO and never looked back. OO has had its first release since being adopted by the Apache Foundation but that release did not support any form of English other than en_US. I do not know what other language packs are available now. Since Oracle is now out of the picture it is possible that LO and OO may again merge into a single project, eventually. On the other hand, maybe not. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

A couple of 32-bit packages got no update in 6.3/x86_64
by Michael Lampe 16 Jul '12

16 Jul '12

Namely: * hivex * hivex-devel * librdmac * librdmac-devel * sanlock-libs * sanlock-devel and maybe others. Is this on purpose (I don't know if upstream has removed or updated the 32-bit rpms, but the old ones are still in C6.3/x86_64), or is it just the usual sloppyness (I've been told here on previous occasions the biarch is a pain in the ass to maintain, nobody cares anyway, it's not 'plain', and no sensible man should be using it). -Michael

3 2

timeout vs. winexe
by Les Mikesell 16 Jul '12

16 Jul '12

I use the winexe (a samba-based tool like psexec) to run a command remotely on windows targets. The problem is, sometimes it hangs until interrupted and I'd like to put it in a cron job. So I added a 'timeout 80' on the command line that starts a shell script that invokes winexe with the needed parameters. This does prevent the hang, but now every run takes the full 80 seconds to return where it should average 5 or 10 seconds on a normal execution - and it seems to trap normal interrupts until its own timeout is reached. Timeout seems to return immediately when other commands exit. Am I missing something obvious that might make it wait in this scenario? Strace show a loop of these filling the time after I think it has completed: ioctl(0, SNDCTL_TMR_START or TCSETS, {B38400 opost isig -icanon echo ...}) = ? ERESTARTSYS (To be restarted) --- SIGTTOU (Stopped (tty output)) @ 0 (0) --- --- SIGTTOU (Stopped (tty output)) @ 0 (0) --- -- Les Mikesell lesmikesell(a)gmail.com

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss